If we've unregistered a memory area, we should avoid calling
qemu_get_ram_ptr() on the left over phys_offset cruft in the
slot array. Now that we support removing ramblocks, the
phys_offset ram_addr_t can go away and cause a lookup fault
and abort.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The timer #0 is the system timer, so the timer #num_cpu is the
timer of the last CPU, and it must be initialized in slavio_timer_reset.
Don't mark non-existing timers as running.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit d167f9bc06 missed this one:
/src/qemu/ui/vnc-enc-tight.c:1483: warning: 'ret' may be used uninitialized in this function
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit 7bccf57383 missed this one:
/src/qemu/ui/vnc-enc-tight.c: In function 'send_sub_rect':
/src/qemu/ui/vnc-enc-tight.c:1527: warning: comparison is always true due to limited range of data type
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add a missing #include statement to avoid a warning:
/src/qemu/net/tap-solaris.c: In function 'tap_open':
/src/qemu/net/tap-solaris.c:189: warning: implicit declaration of function 'error_report'
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This header is not present on my system and causes a build
failure, but is also not used in these files, so remove it.
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When a 'cont' is issued on a VM that's just waiting for an incoming
migration, the VM reboots and boots into the guest, possibly corrupting
its storage since it could be shared with another VM running elsewhere.
Ensure that a VM started with '-incoming' is only run when an incoming
migration successfully completes.
A new qerror, QERR_MIGRATION_EXPECTED, is added to signal that 'cont'
failed due to no incoming migration has been attempted yet.
Reported-by: Laine Stump <laine@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We already set sockets to nonzero in the code above.
So this if statement always evaluates true. Remove it.
Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The variable len can get a negative return value from cvtnum,
which we check for, but which is impossible with the current
unsigned variable type. Currently the if(len < 0) check is
pointless. This patch fixes that.
Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Removing dead code. Above we already continued when
rom->addr + valuegreaterthan0 < addr so this condition is always false.
Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Forgot to check for and free these.
Found-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Currently virtio-serial supports a maximum of 31 ports. Specifying the
'max_ports' parameter to be > 31 on the cmd line causes badness.
Ensure we initialise virtio-serial only if max_ports is within the
supported range.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'for-anthony' of git://repo.or.cz/qemu/kevin:
Fix -snapshot deleting images on disk change
block: Use error codes from lower levels for error message
block: default to 0 minimal / optiomal I/O size
move 'unsafe' to end of caching modes in help
virtio-blk: Create exit function to unregister savevm
block migration: propagate return value when bdrv_write() returns < 0
ide/atapi: add support for GET EVENT STATUS NOTIFICATION
Commit 68a1c81686 broke qemu on hosts not
using guest base. It uses reserved_va unconditionally in mmap.c. To
avoid to many #ifdef #endif blocks, define RESERVED_VA as either
reserved_va or 0ul, and use it instead of reserved_va, similarly to what
has been done with guest_base/GUEST_BASE.
This requires moving the PT_INTERP extraction and GUEST_BASE
handling into load_elf_image. Key this off a non-null pointer
argument to receive the interpreter name.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Moving toward a single copy of the elf binary loading code.
Fill in the details of the loaded image into a struct image_info.
Adjust create_elf_tables to read from such structures instead
of from a collection of passed arguments. Don't return error
values from load_elf_interp; always exit(-1) with a message to
stderr. Collect elf_interpreter handling in load_elf_binary
to a common spot.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
At the bottom of the a.out support was the unimplemented load_aout_interp
function. There were other portions of the support that didn't look
right; when I went to look in the Linux kernel for clarification, I found
that the support for such interpreters has been removed from binfmt_elf.
There doesn't seem to be any reason to keep this broken support in qemu.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
There are no supported stack-grows-up targets. We were putting
the guard page at the highest address, i.e. the bottom of the stack.
Use the maximum of host and guest page size for the guard size.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Validate more fields of the elf header. Extract those checks
into two common functions to be used in both load_elf_interp
and load_elf_binary.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
First, adjust load_symbols to accept a load_bias parameter. At the same
time, read the entire section header table in one go, use pread instead
f lseek+read for the symbol and string tables, and properly free
allocated structures on error exit paths.
Second, adjust load_elf_interp to compute load_bias. This requires
finding out the built-in load addresses. Which allows us to honor a
pre-linked interpreter image when possible, and eliminate the hard-coded
INTERP_MAP_SIZE value.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Remove ifdefs from code by defining empty inline functions
when byte swapping isn't needed. Push loops over swapping
arrays of structures into the swapping functions.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The only consideration on this value is the target endianness.
The existing defines were incorrect for alpha and sh4eb.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Define BPRM_BUF_SIZE to 1k and read that amount initially. If the
data we want from the binary is in this buffer, use it instead of
reading from the file again.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Moving some PPC AT_* constants from elfload.c at the same time.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
I caught padzero not properly initializing the .bss segment
on a statically linked Alpha program. Rather than a minimal
patch, replace the gross code with a single mmap+memset.
Share more code between load_elf_interp and load_elf_binary.
Legally, an ELF program need not have just a single .bss;
and PT_LOAD segment can have memsz > filesz.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Fix mingw32 build errors like
/src/qemu/ui/vnc-enc-tight.c: In function 'tight_detect_smooth_image24':
/src/qemu/ui/vnc-enc-tight.c:119: error: 'uint' undeclared (first use in this function)
Replace 'uint' with proper 'unsigned int'.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix a warning with some GCCs:
/src/qemu/ui/vnc-enc-tight.c: In function `send_sub_rect_nojpeg':
/src/qemu/ui/vnc-enc-tight.c:1458: warning: `ret' might be used uninitialized in this function
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix the following warnings:
/src/qemu/hw/ide/core.c: In function `ide_drive_pio_post_load':
/src/qemu/hw/ide/core.c:2767: warning: comparison is always false due to limited range of data type
/src/qemu/ui/vnc-enc-tight.c: In function `tight_detect_smooth_image':
/src/qemu/ui/vnc-enc-tight.c:284: warning: comparison is always true due to limited range of data type
/src/qemu/ui/vnc-enc-tight.c:297: warning: comparison is always true due to limited range of data type
/src/qemu/ui/vnc-enc-tight.c: In function `tight_encode_indexed_rect16':
/src/qemu/ui/vnc-enc-tight.c:456: warning: comparison is always false due to limited range of data type
/src/qemu/ui/vnc-enc-tight.c: In function `tight_encode_indexed_rect32':
/src/qemu/ui/vnc-enc-tight.c:457: warning: comparison is always false due to limited range of data type
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
vnc_jpeg and vnc_png are now "auto" by default, this means that
if the dependencies are installed (libjpeg or libpng), then they
will be enabled.
vnc_thread is disabled by default. It should be enabled by default
as soon as it's stable enougth.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Split send_sub_rect in send_sub_rect_jpeg and send_sub_rect_nojpeg to
remove all these #ifdef CONFIG_JPEG.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
rgb_prepare_row bpp depends on the server display surface, not
the client.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All vnc_write() calls must be locked (except the ones present before
the protocol initialization).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Implement a threaded VNC server using the producer-consumer model.
The main thread will push encoding jobs (a list a rectangles to update)
in a queue, and the VNC worker thread will consume that queue and send
framebuffer updates to the output buffer.
The threaded VNC server can be enabled with ./configure --enable-vnc-thread.
If you don't want it, just use ./configure --disable-vnc-thread and a syncrhonous
queue of job will be used (which as exactly the same behavior as the old queue).
If you disable the VNC thread, all thread related code will not be built and there will
be no overhead.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add some missing functions in qemu-thread. Currently qemu-thread
is only used for io-thread but it will used by the vnc server soon
and we need those functions instead of calling pthread directly.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will allow to implement the threaded VNC server in a
more cleaner way.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Profiling with callgrind seems to show that a lot of time is spent
in the palette code (mostly due to memory allocation and qdict to int
conversion).
This patch adds a VncPalette implementation. The palette is stored
in a hash table, like qdict, but which does way less memory allocations,
and doesn't suffer from the QObject overhead.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alex Williamson