This patch defines PCI vendor and device IDs in pci.h (matching those
from Linux's pci_ids.h), and uses those definitions where appropriate.
Change from v1:
Introduces pci_config_set_vendor_id() / pci_config_set_device_id()
accessors as suggested by Anthony Liguori.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6442 c046a42c-6fe2-441c-8c8c-71466251a162
The vm state handler needed updating after the recent vm state change
notification refactoring.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6403 c046a42c-6fe2-441c-8c8c-71466251a162
Instead of copying to a temporary buffer, map guest memory for IDE DMA
transactions.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6398 c046a42c-6fe2-441c-8c8c-71466251a162
This version of the patch adds new option "werror" to -drive flag.
Possible values are:
report - report errors to a guest as IO errors
ignore - continue as if nothing happened
stop - stop VM on any error and retry last command on resume
enospc - stop vm on ENOSPC error and retry last command on resume
all other errors are reported to a guest.
Default is "report" to maintain current behaviour.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6388 c046a42c-6fe2-441c-8c8c-71466251a162
During hardware detection Openserver issues commands to slaves on both primary
and secondary ports. We already return a zero for the status register in this
situation but after reading the status register the Openserver installer
proceeds to check the value of the error register. Currently we return the
existing value in the register. This confuses the installer and it tries to
access the slave units later on. When the command that gets issued later gets
ignored the installer freezes. The patch below returns zero when reading the
error register if a slave unit is selected. Openserver can now successfully be
installed using the emulated IDE hard drive.
Return zero when reading error register with slave selected
Signed-off-by: Justin Chevrier <theburner1@yahoo.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6252 c046a42c-6fe2-441c-8c8c-71466251a162
Windows calculates HW "uniqueness" based on a hard drive serial number
among other things. The patch allows to specify drive serial number
from a command line.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6214 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds emulation for a CompactFlash on sh4/r2d board.
The device is CF, but wired to be worked as True-IDE mode, and connected
directly to SH bus. So, this code is to support generally mmio based
IDEs which are supported by "pata_platform" driver in linux kernel.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5924 c046a42c-6fe2-441c-8c8c-71466251a162
Virtio will want to use the geometry detection code. It doesn't belong
in ide.c anyway.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5797 c046a42c-6fe2-441c-8c8c-71466251a162
This patch tweaks the ATAPI CDROM emulation to fix an annoyance seen
when running a variety of Linux guests: the desktop GUI shows a CDROM
device as present, but is unable to automount the media and display its
contents.
The patch adds the PLAY_AUDIO capability bit to the data returned by
MODE_SENSE commands. That convinces the guest kernel to determine what
kind of media is present.
Arguably Linux could be smarter about this, but it's my guess there are
few (if any) hardware CDROM drives that don't set the bit, and there are
a large number of Linux distros that exhibit this problem.
Signed-off-by: Gary Grebus <ggrebus@virtualiron.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5752 c046a42c-6fe2-441c-8c8c-71466251a162
Windows only flushes its cache of a CDROM if it gets a
SENSE_UNIT_ATTENTION CHECK_CONDITION response to a REQUEST_SENSE
command.
Make sure it does so after we change the CD.
Tab damage fixed by Anthony Liguori
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Steven Smith <steven.smith@citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5698 c046a42c-6fe2-441c-8c8c-71466251a162
The DIAGNOSE command in the qemu IDE implementation has an error when
use dfor packet devices.
The status register value is dependant on the drive being a packet
device or not, this patch corrects the returned status.
From the ATA/PI specification (V6 draft):
"If the device implements the PACKET command feature set, the device
SHALL clear bits 6,5,4,3,2 and 0 in the Status register to zero."
A selection of physical devices have been checked and do conform to
the specifications behaviour.
Signed-off-by: Vincent Sanders <vince@simtec.co.uk>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5452 c046a42c-6fe2-441c-8c8c-71466251a162
If it does not, abort the command immediately rather than dropping
it on the floor.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5369 c046a42c-6fe2-441c-8c8c-71466251a162
This patch makes the ide emulation actually take notice of
error returns from bdrv_write and bdrv_aio_{read,write}.
(Cherry picked from qemu-xen e0e7a0afe0e324a1f7d64c240f567b15dbe454cf,
first posted to qemu-devel Wed, 20 Feb 2008 15:26:41 +0000)
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5368 c046a42c-6fe2-441c-8c8c-71466251a162
Feature, Sector Count, LBA Low/Mid/High and Device registers should be
written only when both BSY and DRQ are cleared to zero.
Command register shall only be written when BSY and DRQ are set to zero
for all commands except DEVICE RESET.
Data Port register shall be accessed for host PIO data transfer only when
DRQ is set to one.
Signed-off-by: Gleb Natapov <gleb@qumranet.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5060 c046a42c-6fe2-441c-8c8c-71466251a162
Cancel AIO in IDE layer on device rest in order to be in deterministic state
during next boot.
Signed-off-by: Gleb Natapov <gleb@qumranet.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5011 c046a42c-6fe2-441c-8c8c-71466251a162
Add SEEK_STAT in all non-error cases except sleep request, since our
seek times are virtually 0. Although this flag is deprecated by newer
ATA standards, Linux at least checks it for CD drives, and would timeout
in some case if we do not set it.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4994 c046a42c-6fe2-441c-8c8c-71466251a162
The current implementation of GET_CONFIGURATION in the ATAPI stack of qemu
replies a different length depending on the buffer, the data should be
written into.
On the other hand the SCSI spec defines that length information has to be
consistent and independent of return buffer lengths.
This patch makes the ATAPI emulation behave according to the spec and fixes
the Darwin DVD driver.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@suse.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4649 c046a42c-6fe2-441c-8c8c-71466251a162
