add support for autoprobing the tuners

Signed-off-by: Steve Markgraf <steve@steve-m.de>
This commit is contained in:
Steve Markgraf 2012-03-31 21:01:25 +02:00
parent c09fbb7c57
commit ff79104824
5 changed files with 99 additions and 117 deletions

View File

@ -1,120 +1,15 @@
#ifndef __TUNER_E4000_H #ifndef __TUNER_E4000_H
#define __TUNER_E4000_H #define __TUNER_E4000_H
/**
@file
@brief E4000 tuner module declaration
One can manipulate E4000 tuner through E4000 module.
E4000 module is derived from tuner module.
@par Example:
@code
// The example is the same as the tuner example in tuner_base.h except the listed lines.
#include "tuner_e4000.h"
...
int main(void)
{
TUNER_MODULE *pTuner;
E4000_EXTRA_MODULE *pTunerExtra;
TUNER_MODULE TunerModuleMemory;
BASE_INTERFACE_MODULE BaseInterfaceModuleMemory;
// I2C_BRIDGE_MODULE I2cBridgeModuleMemory;
unsigned long BandwidthMode;
...
// Build E4000 tuner module.
BuildE4000Module(
&pTuner,
&TunerModuleMemory,
&BaseInterfaceModuleMemory,
&I2cBridgeModuleMemory,
0xac, // I2C device address is 0xac in 8-bit format.
CRYSTAL_FREQ_16384000HZ, // Crystal frequency is 16.384 MHz.
E4000_AGC_INTERNAL // The E4000 AGC mode is internal AGC mode.
);
// Get E4000 tuner extra module.
pTunerExtra = (T2266_EXTRA_MODULE *)(pTuner->pExtra);
// ==== Initialize tuner and set its parameters =====
...
// Set E4000 bandwidth.
pTunerExtra->SetBandwidthMode(pTuner, E4000_BANDWIDTH_6MHZ);
// ==== Get tuner information =====
...
// Get E4000 bandwidth.
pTunerExtra->GetBandwidthMode(pTuner, &BandwidthMode);
// See the example for other tuner functions in tuner_base.h
return 0;
}
@endcode
*/
//#include "tuner_base.h"
// The following context is implemented for E4000 source code.
// Definition (implemeted for E4000) // Definition (implemeted for E4000)
#define E4000_1_SUCCESS 1 #define E4000_1_SUCCESS 1
#define E4000_1_FAIL 0 #define E4000_1_FAIL 0
#define E4000_I2C_SUCCESS 1 #define E4000_I2C_SUCCESS 1
#define E4000_I2C_FAIL 0 #define E4000_I2C_FAIL 0
#define E4K_I2C_ADDR 0xc8
#define E4K_CHECK_ADDR 0x02
#define E4K_CHECK_VAL 0x40
// Function (implemeted for E4000) // Function (implemeted for E4000)
int int

View File

@ -15,6 +15,10 @@ FC0013 module is derived from tuner module.
**/ **/
#define FC0013_I2C_ADDR 0xc6
#define FC0013_CHECK_ADDR 0x00
#define FC0013_CHECK_VAL 0xa3
// Definitions // Definitions
enum FC0013_TRUE_FALSE_STATUS enum FC0013_TRUE_FALSE_STATUS
{ {

View File

@ -5,7 +5,7 @@
* This program is free software: you can redistribute it and/or modify * This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or * the Free Software Foundation, either version 2 of the License, or
*(at your option) any later version. * (at your option) any later version.
* *
* This program is distributed in the hope that it will be useful, * This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of * but WITHOUT ANY WARRANTY; without even the implied warranty of
@ -44,7 +44,7 @@ int fc0013_init(void *dev) { return FC0013_Open(dev); }
int fc0013_exit(void *dev) { return 0; } int fc0013_exit(void *dev) { return 0; }
int fc0013_tune(void *dev, int freq) { int fc0013_tune(void *dev, int freq) {
/* read bandwidth mode to reapply it */ /* read bandwidth mode to reapply it */
int bw = 0; unsigned int bw = 6;
//fc0013_GetBandwidthMode(dev, &bw); // FIXME: missing //fc0013_GetBandwidthMode(dev, &bw); // FIXME: missing
return FC0013_SetFrequency(dev, freq/1000, bw & 0xff); return FC0013_SetFrequency(dev, freq/1000, bw & 0xff);
} }
@ -57,10 +57,9 @@ int fc0013_set_bw(void *dev, int bw) {
} }
enum rtlsdr_tuners { enum rtlsdr_tuners {
RTLSDR_TUNER_UNDEF,
RTLSDR_TUNER_E4000, RTLSDR_TUNER_E4000,
RTLSDR_TUNER_FC0012, RTLSDR_TUNER_FC0012,
RTLSDR_TUNER_FC0013 RTLSDR_TUNER_FC0013,
}; };
typedef struct rtlsdr_tuner { typedef struct rtlsdr_tuner {
@ -161,6 +160,23 @@ int rtlsdr_write_array(rtlsdr_dev_t *dev, uint8_t block, uint16_t addr, uint8_t
return r; return r;
} }
int rtlsdr_i2c_write_reg(rtlsdr_dev_t *dev, uint8_t i2c_addr, uint8_t data)
{
uint16_t addr = i2c_addr;
return rtlsdr_write_array(dev, IICB, addr, &data, 1);
}
uint8_t rtlsdr_i2c_read_reg(rtlsdr_dev_t *dev, uint8_t i2c_addr, uint8_t reg)
{
uint16_t addr = i2c_addr;
uint8_t data;
rtlsdr_write_array(dev, IICB, addr, &reg, 1);
rtlsdr_read_array(dev, IICB, addr, &data, 1);
return data;
}
int rtlsdr_i2c_write(rtlsdr_dev_t *dev, uint8_t i2c_addr, uint8_t *buffer, int len) int rtlsdr_i2c_write(rtlsdr_dev_t *dev, uint8_t i2c_addr, uint8_t *buffer, int len)
{ {
uint16_t addr = i2c_addr; uint16_t addr = i2c_addr;
@ -251,6 +267,27 @@ void rtlsdr_demod_write_reg(rtlsdr_dev_t *dev, uint8_t page, uint16_t addr, uint
rtlsdr_demod_read_reg(dev, 0x0a, 0x01, 1); rtlsdr_demod_read_reg(dev, 0x0a, 0x01, 1);
} }
void rtlsdr_set_gpio_bit(rtlsdr_dev_t *dev, uint8_t gpio, int val)
{
uint8_t r;
gpio = 1 << gpio;
r = rtlsdr_read_reg(dev, SYSB, GPO, 1);
r = val ? (r | gpio) : (r & ~gpio);
rtlsdr_write_reg(dev, SYSB, GPO, r, 1);
}
void rtlsdr_set_gpio_output(rtlsdr_dev_t *dev, uint8_t gpio)
{
int r;
gpio = 1 << gpio;
r = rtlsdr_read_reg(dev, SYSB, GPD, 1);
rtlsdr_write_reg(dev, SYSB, GPO, r & ~gpio, 1);
r = rtlsdr_read_reg(dev, SYSB, GPOE, 1);
rtlsdr_write_reg(dev, SYSB, GPOE, r | gpio, 1);
}
void rtlsdr_set_i2c_repeater(rtlsdr_dev_t *dev, int on) void rtlsdr_set_i2c_repeater(rtlsdr_dev_t *dev, int on)
{ {
rtlsdr_demod_write_reg(dev, 1, 0x01, on ? 0x18 : 0x10, 1); rtlsdr_demod_write_reg(dev, 1, 0x01, on ? 0x18 : 0x10, 1);
@ -464,6 +501,15 @@ const char *rtlsdr_get_device_name(uint32_t index)
return ""; return "";
} }
/* TODO: put those defines in the tuner header once the drivers are added */
#define FC0012_I2C_ADDR 0xc6
#define FC0012_CHECK_ADDR 0x00
#define FC0012_CHECK_VAL 0xa1
#define FC2580_I2C_ADDR 0xac
#define FC2580_CHECK_ADDR 0x01
#define FC2580_CHECK_VAL 0x56
rtlsdr_dev_t *rtlsdr_open(int index) rtlsdr_dev_t *rtlsdr_open(int index)
{ {
int r; int r;
@ -473,6 +519,7 @@ rtlsdr_dev_t *rtlsdr_open(int index)
libusb_device *device = NULL; libusb_device *device = NULL;
uint32_t device_count = 0; uint32_t device_count = 0;
struct libusb_device_descriptor dd; struct libusb_device_descriptor dd;
uint8_t reg;
dev = malloc(sizeof(rtlsdr_dev_t)); dev = malloc(sizeof(rtlsdr_dev_t));
memset(dev, 0, sizeof(rtlsdr_dev_t)); memset(dev, 0, sizeof(rtlsdr_dev_t));
@ -514,10 +561,49 @@ rtlsdr_dev_t *rtlsdr_open(int index)
rtlsdr_init_baseband(dev); rtlsdr_init_baseband(dev);
// TODO: probe the tuner and set dev->tuner member to appropriate tuner object /* Probe tuners */
// dev->tuner = &tuners[...]; rtlsdr_set_i2c_repeater(dev, 1);
reg = rtlsdr_i2c_read_reg(dev, E4K_I2C_ADDR, E4K_CHECK_ADDR);
if (reg == E4K_CHECK_VAL) {
printf("Found Elonics E4000 tuner\n");
dev->tuner = &tuners[RTLSDR_TUNER_E4000];
goto found;
}
reg = rtlsdr_i2c_read_reg(dev, FC0013_I2C_ADDR, FC0013_CHECK_ADDR);
if (reg == FC0013_CHECK_VAL) {
printf("Found Fitipower FC0013 tuner\n");
dev->tuner = &tuners[RTLSDR_TUNER_FC0013];
goto found;
}
reg = rtlsdr_i2c_read_reg(dev, FC2580_I2C_ADDR, FC2580_CHECK_ADDR);
if ((reg & 0x7f) == FC2580_CHECK_VAL) {
printf("Found FCI 2580 tuner\n");
//dev->tuner = &tuners[RTLSDR_TUNER_FC2580];
// TODO: set GPIO5 low
goto found;
}
/* initialise GPIOs (only needed for the FC0012 so far */
rtlsdr_set_gpio_output(dev, 5);
/* reset FC0012 before probing */
rtlsdr_set_gpio_bit(dev, 5, 1);
rtlsdr_set_gpio_bit(dev, 5, 0);
reg = rtlsdr_i2c_read_reg(dev, FC0012_I2C_ADDR, FC0012_CHECK_ADDR);
if (reg == FC0012_CHECK_VAL) {
printf("Found Fitipower FC0012 tuner\n");
dev->tuner = &tuners[RTLSDR_TUNER_FC0012];
goto found;
}
found:
rtlsdr_set_i2c_repeater(dev, 0);
return dev; return dev;
err: err:
return NULL; return NULL;
} }

View File

@ -18,9 +18,7 @@
#define I2C_BUFFER_LEN 128 #define I2C_BUFFER_LEN 128
#define YES 1 #define YES 1
#define NO 0 #define NO 0
#define CRYSTAL_FREQ 28800000 #define CRYSTAL_FREQ 28800000
#define E4K_I2C_ADDR 0xc8
/* glue functions to rtl-sdr code */ /* glue functions to rtl-sdr code */
int int

View File

@ -11,7 +11,6 @@
#include "tuner_fc0013.h" #include "tuner_fc0013.h"
#define CRYSTAL_FREQ 28800000 #define CRYSTAL_FREQ 28800000
#define FC0013_I2C_ADDR 0xc6
/* glue functions to rtl-sdr code */ /* glue functions to rtl-sdr code */
int FC0013_Write(void *pTuner, unsigned char RegAddr, unsigned char Byte) int FC0013_Write(void *pTuner, unsigned char RegAddr, unsigned char Byte)