retronetworking
/
wanpipe
13
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
wanpipe/rpmspec/wanpipe-util.spec

608 lines
20 KiB
RPMSpec
Raw Normal View History

wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
%define KERNEL_VERSION %{?kern_ver}
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
%define WANPIPE_VER wanpipe-util
%define name %{WANPIPE_VER}
wanpipe-3.5.12.tgz
2021-12-29 17:42:17 +00:00
%define version 3.5.12
wanpipe-3.1.0.tgz
2021-12-29 17:02:04 +00:00
%define release 0
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
%define serial 1
wanpipe-3.2.2.tgz
2021-12-29 17:14:12 +00:00
%define ETC_DIR /etc
%define USR_DIR /usr
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
%define UTILS_DIR /usr/sbin
%define PROD_HOME /etc/wanpipe
%define WANCFG_LIBS_DIR /etc/wanpipe/wancfg/lib
%define API_DIR /etc/wanpipe/api
%define DOCS_DIR /usr/share/doc/wanpipe
%define KERNEL_VERSION /
%define PROD wanrouter
%define META_CONF %{PROD_HOME}/%{PROD}.rc
%define WAN_INTR_DIR %{PROD_HOME}/interfaces
%define WAN_CONF_DIR %{PROD_HOME}
%define PROD_CONF %{WAN_CONF_DIR}/wanpipe1.conf
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
%define LIBSANGOMA_CONF /etc/ld.so.conf.d/libsangoma.so.conf
#%define START_SCRIPT S07%{PROD}
#%define OLD_START S07router
#%define STOP_SCRIPT K10%{PROD}
#%define OLD_STOP K10router
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
%define ROUTER_RC %{META_CONF}
%define WANROUTER_STARTUP_SMPL %{PROD_HOME}/samples/wanrouter
%define WANROUTER_STARTUP /usr/sbin/wanrouter
%define NEW_IF_TYPE NO
%define PROD_INIT /usr/sbin/
Summary: Sangoma WANPIPE package for Linux. It contains WANPIPE configuration/startup/debugging utilities for Linux. This package requires the wanpipe-mod package!
Name: %{name}
Version: %{version}
Release: %{release}
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
License: GPL
Group: Applications/Communications
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
#Source0: %{WANPIPE_VER}.tgz
#Source1: bridge-utils-0.9.1.tar.gz
Vendor: Sangoma Technologies Inc.
Url: www.sangoma.com
Group: Networking/WAN
%description
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
Linux Utilities for Sangoma AFT-Series of cards and S-Series of Cards. Wanpipe supports the following protocols, TDM Voice, Frame Relay, X25(API), PPP,Multi-link PPP, CHDLC and custom API development for WAN and Voice.
Install Wanpipe-modules package for wanpipe drivers.
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
%prep
%build
%install
%clean
%postun
echo "Uninstalling WANPIPE..."
# ----------------------------------------------------------------------------
# Remove initialization scripts.
# ----------------------------------------------------------------------------
remove_init()
{
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
chkconfig --del wanrouter
rm /etc/init.d/wanrouter
}
remove_init_old()
{
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
# Examine system bootstrap files.
if [ -d /etc/rc0.d ]
then RC_DIR=/etc
elif [ -d /etc/rc.d/rc0.d ]
then RC_DIR=/etc/rc.d
else return 0
fi
echo "Removing start-up scripts..."
rm -f $RC_DIR/rc2.d/%{START_SCRIPT}
rm -f $RC_DIR/rc3.d/%{START_SCRIPT}
rm -f $RC_DIR/rc4.d/%{START_SCRIPT}
rm -f $RC_DIR/rc5.d/%{START_SCRIPT}
rm -f $RC_DIR/rc0.d/%{STOP_SCRIPT}
rm -f $RC_DIR/rc1.d/%{STOP_SCRIPT}
rm -f $RC_DIR/rc6.d/%{STOP_SCRIPT}
rm -f $RC_DIR/init.d/%{PROD}
return 0
}
#remove start-on-boot scripts
remove_init;
%post
# ----------------------------------------------------------------------------
# Create meta-configuration file.
# ----------------------------------------------------------------------------
create_metaconf()
{
local response
# Select directory for the log file.
if [ -d /var/log ]; then
LOG_FILE=/var/log/%{PROD}
elif [ -d /var/adm wanpipe1]; then
LOG_FILE=/var/adm/%{PROD}
else
LOG_FILE=%{PROD_HOME}/%{PROD}.log
fi
# Select directory for the lock file.
if [ -d /var/lock/subsys ]; then
LOCK_FILE=/var/lock/subsys/%{PROD}
elif [ -d /var/lock ]; then
LOCK_FILE=/var/lock/%{PROD}
else
LOCK_FILE=$PROD_HOME/%{PROD}.lck
fi
cat > %{META_CONF} << ENDOFTEXT
#!/bin/sh
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
# wanrouter.rc WAN router meta-configuration file.
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
#
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
# This file defines variables used by the router shell scripts
# and should be located in /etc/wanpipe directory. These are:
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
#
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
# ROUTER_BOOT = Boot flag (YES/NO).
# WAN_CONF_DIR = Where to put wanpipe config files.
# WAN_INTR_DIR = Where to put wanpipe interface files.
# WAN_LOG = Where to put start-up log file.
# WAN_LOCK = File used as a lock.
# WAN_LOCK_DIR =
# WAN_IP_FORWARD = Enable IP Forwarding on startup.
# WAN_DEVICES = Name of the wanpipe devices to be
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
# loaded on 'wanrouter start'
# (ex: "wanpipe1 wanpipe2 wanpipe3...")
#
# Note: Name of wanpipe devices correspond
# to the configuration files in
# WANPIPE_CONF_DIR directory:
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
# (ex. /etc/wanpipe/wanpipe1.conf )
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
#
# Note: This file is 'executed' by the shell script, so
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
# the usual shell syntax must be observed.
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
ENDOFTEXT
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
echo "ROUTER_BOOT=YES" >> %{META_CONF}
echo "WAN_CONF_DIR=%{WAN_CONF_DIR}" >> %{META_CONF}
echo "WAN_INTR_DIR=%{WAN_INTR_DIR}" >> %{META_CONF}
echo "WAN_LOG=$LOG_FILE" >> %{META_CONF}
echo "WAN_LOCK=$LOCK_FILE" >> %{META_CONF}
echo "WAN_LOCK_DIR=/var/lock/subsys" >> %{META_CONF}
echo "WAN_IP_FORWARD=NO" >> %{META_CONF}
echo "NEW_IF_TYPE=NO" >> %{META_CONF}
echo "WAN_LIB_DIR=/etc/wanpipe/lib" >> %{META_CONF}
echo "WAN_ADSL_LIST=/etc/wanpipe/wan_adsl.list" >> %{META_CONF}
echo "WAN_ANNEXG_LOAD=NO" >> %{META_CONF}
echo "WAN_LIP_LOAD=YES" >> %{META_CONF}
echo "WAN_DYN_WANCONFIG=NO" >> %{META_CONF}
echo "WAN_SCRIPTS_DIR=/etc/wanpipe/scripts" >> %{META_CONF}
echo "WAN_FIRMWARE_DIR=/etc/wanpipe/firmware" >> %{META_CONF}
echo "WAN_DEVICES_REV_STOP_ORDER=YES" >> %{META_CONF}
echo "WAN_DEVICES=\"wanpipe1\"" >> %{META_CONF}
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
return 0
}
# ----------------------------------------------------------------------------
# Install initialization scripts.
# ----------------------------------------------------------------------------
install_init()
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
{
ln -s /usr/sbin/wanrouter /etc/init.d/wanrouter
wanpipe-3.3.2.tgz
2021-12-29 17:18:25 +00:00
chkconfig --add wanrouter
chkconfig wanrouter on
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
}
wanpipe-3.3.2.tgz
2021-12-29 17:18:25 +00:00
# ----------------------------------------------------------------------------
# Enable MGD and BRI log for A500-BRI
# ----------------------------------------------------------------------------
enable_smg_log()
{
if [ -e /etc/syslog.conf ]; then
eval "grep "local2.*sangoma_mgd" /etc/syslog.conf" > /dev/null 2> /dev/null
if [ $? -ne 0 ]; then
eval "grep "local2" /etc/syslog.conf " > /dev/null 2> /dev/null
if [ $? -eq 0 ]; then
echo
echo "Warning : local2 is already used in syslog.conf"
echo
fi
echo -e "\n# Sangoma Media Gateway log" > tmp.$$
echo -e "local2.* /var/log/sangoma_mgd.log\n" >> tmp.$$
eval "cat /etc/syslog.conf tmp.$$ > tmp1.$$"
\cp -f tmp1.$$ /etc/syslog.conf
eval "/etc/init.d/syslog restart" > /dev/null 2>/dev/null
fi
eval "grep "local3.*sangoma_bri" /etc/syslog.conf" > /dev/null 2> /dev/null
if [ $? -ne 0 ]; then
eval "grep "local3" /etc/syslog.conf " > /dev/null 2> /dev/null
if [ $? -eq 0 ]; then
echo
echo "Warning : local3 is already used in syslog.conf"
echo
fi
echo -e "\n# Sangoma BRI Daemon (smg_bri) log" > tmp.$$
echo -e "local3.* /var/log/sangoma_bri.log\n" >> tmp.$$
eval "cat /etc/syslog.conf tmp.$$ > tmp1.$$"
\cp -f tmp1.$$ /etc/syslog.conf
eval "/etc/init.d/syslog restart" > /dev/null 2> /dev/null
fi
else
echo "Warning: /etc/syslog.conf not found"
fi
if [ -f tmp1.$$ ]; then
rm -f tmp1.$$
fi
if [ -f tmp.$$ ]; then
rm -f tmp.$$
fi
echo "Ok"
echo
echo "Checking logrotate ..."
eval "type logrotate" > /dev/null 2> /dev/null
if [ $? -ne 0 ]; then
echo "Error: Logrotate not found !"
fi
if [ -e /etc/logrotate.d ] && [ -e /etc/logrotate.d/syslog ]; then
eval "grep sangoma_mgd /etc/logrotate.d/syslog" > /dev/null 2> /dev/null
if [ $? -ne 0 ]; then
eval "sed -e 's/messages/messages \/var\/log\/sangoma_mgd.log/' /etc/logrotate.d/syslog >tmp2.$$ 2>/dev/null"
eval "cp -f tmp2.$$ /etc/logrotate.d/syslog"
eval "logrotate -f /etc/logrotate.d/syslog"
if [ $? -ne 0 ]; then
echo "Error: logrotate restart failed!";
exit 1;
fi
echo "Logrotate is being changed and restarted!"
else
echo "Logrotate is configured!"
fi
else
echo "Error: Logrotate dir: /etc/logrotate.d not found !"
fi
echo "OK."
echo
}
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
install_init_old()
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
{
#Examine system bootstrap files.
if [ -d /etc/rc0.d ]
then RC_DIR=/etc
elif [ -d /etc/rc.d/rc0.d ]
then RC_DIR=/etc/rc.d
else return 0
fi
PROD_INIT=%{PROD_INIT}%{PROD}
# Install start scripts.
[ -d $RC_DIR/rc2.d ] && ln -sf $PROD_INIT $RC_DIR/rc2.d/%{START_SCRIPT}
[ -d $RC_DIR/rc3.d ] && ln -sf $PROD_INIT $RC_DIR/rc3.d/%{START_SCRIPT}
[ -d $RC_DIR/rc5.d ] && ln -sf $PROD_INIT $RC_DIR/rc4.d/%{START_SCRIPT}
[ -d $RC_DIR/rc5.d ] && ln -sf $PROD_INIT $RC_DIR/rc5.d/%{START_SCRIPT}
# Install stop scripts.
[ -d $RC_DIR/rc0.d ] && ln -sf $PROD_INIT $RC_DIR/rc0.d/%{STOP_SCRIPT}
[ -d $RC_DIR/rc1.d ] && ln -sf $PROD_INIT $RC_DIR/rc1.d/%{STOP_SCRIPT}
[ -d $RC_DIR/rc6.d ] && ln -sf $PROD_INIT $RC_DIR/rc6.d/%{STOP_SCRIPT}
[ -d $RC_DIR/init.d ] && ln -sf $PROD_INIT $RC_DIR/init.d/%{PROD}
return 0
}
if [ -d "/usr/local/wanrouter" ]; then
cat <<EOM
*** Previous installation of Wanpipe detected.
Please use /usr/sbin/wancfg instead of /usr/local/wanrouter/wancfg
for Wanpipe configuration.
The new configuration files will be saved in /etc/wanpipe
and /etc/wanpipe/interfaces directories.
EOM
else
echo 'no old wanpipe detected' > /dev/null
fi
cat <<EOM
*** Sangoma Wanpipe was successfully installed.
Run wancfg command to configure wanpipe.
Refer to %{DOCS_DIR} for documentation.
EOM
#install start-on-boot scripts
install_init;
#create wanrouter.rc in /etc/wanpipe
#create_metaconf;
wanpipe-3.3.2.tgz
2021-12-29 17:18:25 +00:00
enable_smg_log;
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
%files
wanpipe-3.2.2.tgz
2021-12-29 17:14:12 +00:00
%{ETC_DIR}
%{USR_DIR}
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
%{UTILS_DIR}
Checkin of wanpipe-2.3.2-7.tgz
2021-12-29 16:56:27 +00:00
%{PROD_HOME}
%{DOCS_DIR}
%changelog
wanpipe-3.3.16.tgz
2021-12-29 17:25:26 +00:00
wanpipe-3.5.12.tgz
2021-12-29 17:42:17 +00:00
* Mon Jun 28 2010 Nenad Corbic <ncorbic@sangoma.com> - 3.5.12
===================================================================
- Fixed Dahdi 2.3 Support
- Fixed FreeSwitch Openzap HardHDLC option for AFT cards
- Fixed wanpipemon support for non aft cards.
- Merged USB FXO code from 3.6 release
- USB FXO bug fix for 2.6.32 kernels
- Support for B800 Analog card
- Fixed alarm reporting in DAHDI/ZAPTEL
- Added Extra EC DSP Configuration Options
HWEC_OPERATION_MODE = OCT_NORMAL # OCT_NORMAL: echo cancelation enabled with nlp (default)
# OCT_SPEECH: improves software tone detection by disabling NLP (echo possible)
# OCT_NO_ECHO:disables echo cancelation but allows VQE/tone functions.
HWEC_DTMF_REMOVAL = NO # NO: default YES: remove dtmf out of incoming media (must have hwdtmf enabled)
HWEC_NOISE_REDUCTION = NO # NO: default YES: reduces noise on the line - could break fax
HWEC_ACUSTIC_ECHO = NO # NO: default YES: enables acustic echo cancelation
HWEC_NLP_DISABLE = NO # NO: default YES: guarantees software tone detection (possible echo)
HWEC_TX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio level to be maintained (-20 default)
HWEC_RX_AUTO_GAIN = 0 # 0: disable -40-0: default rx audio level to be maintained (-20 default)
HWEC_TX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal
HWEC_RX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal
- Added AIS BLUE Alarm Maintenance Startup option
Allows a port to be started in BLUE alarm.
TE_AIS_MAINTENANCE = NO #NO: defualt YES: Start port in AIS Blue Alarm and keep line down
#wanpipemon -i w1g1 -c Ttx_ais_off to disable AIS maintenance mode
#wanpipemon -i w1g1 -c Ttx_ais_on to enable AIS maintenance mode
- Fixed Legacy XDLC compile
- Fixed core edge case scenarios where
potential race condition could occour.
wanpipe-3.5.11.tgz
2021-12-29 17:41:53 +00:00
* Thu Apr 08 2010 Nenad Corbic <ncorbic@sangoma.com> - 3.5.11
===================================================================
- Fix for 2.6.31 and higher kernels
- TDM API Analog rx gain feature
- Disabled default NOISE REDUCTION feature in hwec
that was enabled in 3.5.9 release.
- Updates to T1/E1 Loopback and BERT Test
* Wed Jan 11 2010 Nenad Corbic <ncorbic@sangoma.com> - 3.5.10
===================================================================
- Release cleanup script earsed libsangoma.c during release packaging.
I have update release procedure so this does not happen again.
This release has no functionl differences aside from the missing
file from 3.5.9 release.
* Wed Dec 30 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.9
===================================================================
- New logger dev feature
- Bug fix in tx fifo handler
- Dahdi 2.2 broke wanpipe rbs support.
- Fixed free run interrupt supported on V38 (A108)
- Fixed RBS signalling for E1 channel 31
- Added Front end Reset Detection
-> Support for new A108 Firmware V40
- Fixed RTP TAP bug: Caused high system load on RTP TAP usage.
- Added excessive fifo error sanity check. Fixes random pci dma errors.
- HWEC: Increased EC VQE Delay: Fixes random fax failure due to hwec.
- HWEC: Check state before bypass enable.
- HWEC: Disable bypass on release
- HWEC: Enabled Noise Reduction by default
- HWEC: Enabled Auto Gain Control by default
- HWEC: To disable Noise Reduction and Gain control set
-> HWEC_NOISE_REDUCTION_DISABLE=NO in [wanpipe] section of wanpipe1.conf
To check if Noise Reduction or Gain control are set
-> wan_ec_client wanpipe1 stats 1
* Thu Oct 02 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.8
===================================================================
- Bug fix in sangoma_prid PRI stack for FreeSwitch & Asterisk.
There was a slow memory leak.
* Thu Sep 04 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.7
===================================================================
- New Telesoft PRI Stack Support for FreeSwitch & Asterisk
For Asterisk: The new stack uses the existing Sangoma Media Gateway
architecture currently used by SS7 and BRI.
-> run: wancfg_dahdi or wancfg_zaptel to configure
for sangoma prid stack.
For FreeSwitch: The new stack binds to openzap directly just like
current SS7 and BRI.
-> run: wancfg_fs to configure freeswitch for
sangoma prid, brid, ss7.
- Fixed Tx Tristate
- Updated yellow alarm handling for Dallas maxim cards
(A101/2/4/8)
- Autodetect USB support so that driver will compile
correctly on kernel without USB support
- Added DAHDI Red alarm for Analog
wanpipe-3.5.6.tgz
2021-12-29 17:41:18 +00:00
* Thu Aug 20 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.6
===================================================================
- Update to T1 Yellow Alarm handling.
In some cases Yellow alarm did not turn off poperly causing
line to stay down an card startup.
wanpipe-3.5.11.tgz
2021-12-29 17:41:53 +00:00
- Update configuration utility
wancfg_fs updated for sangoma_prid configuration. Added wancfg_openzap
for OpenZap Configuration
wanpipe-3.5.6.tgz
2021-12-29 17:41:18 +00:00
wanpipe-3.5.5.tgz
2021-12-29 17:40:38 +00:00
* Mon Aug 17 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.5
===================================================================
- Dahdi 2.2 Support
- BRI Update - Added T1 timer for NT module
- AFT Core Update - optimized dma ring buffer usage
- TDM API - refractoring and optimization
- Updated for 2.6.30 kernel
- New firmawre feature for A101/2/5/8: Free Run Timer Interrupt
The AFT T1/E1 cards will now provide perfect timing to zatpel/dahdi
even when the ports are not connected. The free run interrupt
will be enabled when all zaptel/dahdi ports are down, or on
inital card start. To test this feature just start a wanpipe
port with zaptel/dahdi and run zttest.
A108 firmare V38
A104/2/1/ firmware V36
- AFT T1/E1 front end update
Added OOF alarm treshold, so that line does not go down
on very first OOF alarm.
- Added module inc cound when zaptel/dahdi starts.
So wanpipe drivers do not crash if one tries to unload
zaptel/dahdi before stopping wanpipe drivers.
* Thu Jul 07 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.4.8
===================================================================
- Updated for B700 Dchan Critical Timeout
- Fix for FAX detect on PRI
- Updated for 2.6.21 kernel TASK QUEUE REMOVAL caused
unexpected behaviour.
- Updated wancfg_zaptel for fax detect
* Thu Jul 03 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.4.3
===================================================================
- Added DAHDI 2.2 Support
* Thu Jul 02 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.4.2
===================================================================
- AFT 64bit update
No need for --64bit_4G flag any more.
The 64bit check is now down in the driver.
- TDM API
Updated the Global TDM Device
This device can be used to read events an all cards configured in
TDM API mode.
- Libsangoma verion 3.1.0
Added a function to check if hwec is supported
* Tue Jun 30 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.4.1
===================================================================
- Sangoma MGD update v.1.48
Disable hwec on data calls
* Mon Jun 29 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.4
wanpipe-3.5.4.tgz
2021-12-29 17:39:53 +00:00
===================================================================
- E1 Voice Bug fix introduced in 3.5.3
- Removed NOISE REDUCTION enabled by default.
The noise reduction is disabled by default and should be
enabled using HWEC_NOISE_REDUCTION = YES
- Fixed libsangoma enable dtmf events functionality
wanpipe-3.5.3.tgz
2021-12-29 17:31:43 +00:00
* Tue Jun 25 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.3
wanpipe-3.5.2.tgz
2021-12-29 17:31:01 +00:00
===================================================================
wanpipe-3.5.3.tgz
2021-12-29 17:31:43 +00:00
- New Makefile build system
Note this does not replace Setup. Makefile build system can be
used by power users.
Asterisk
make dahdi DAHDI_DIR=<abs path to dahdi>
make install
make zaptel ZAPDIR=<abs path to zaptel>
make install
FreeSwitch
make openzap
make install
TDM API
make all_src
make install
- Updated libsangoma API
Redesigned wait object for Linux/Windows integration.
- Turned on HWEC Noise Reduction by default
To disable noise reduction specify
HWEC_NOISE_REDUCTION_DISABLE=YES in [wanpipe1] section of wanpipe
config file.
- Regression tested for FreeSwitch+OpenZAP
- Updated dma buffers in ZAPTEL and TDM API mode.
- Bug fixes for Mixed Data + Voice Mode
- Bug fix on TDM API mode.
Flush buffers could interfere with tx/rx data.
- Added BRI DCHAN monitor in case task is not scheduled by the
system. Sanity check.
- Fixed libsangoma stack overflow check that failed on some kernels.
* Fri May 08 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.2
===================================================================
- B700 PCIe cards were being displayed as PCI cards in hwprobe
wanpipe-3.5.2.tgz
2021-12-29 17:31:01 +00:00
- Bug fix in wancfg_zaptel
wanpipe-3.5.3.tgz
2021-12-29 17:31:43 +00:00
* Thu May 07 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.1
wanpipe-3.5.1.tgz
2021-12-29 17:30:35 +00:00
===================================================================
wanpipe-3.4.9.tgz
2021-12-29 17:29:53 +00:00
wanpipe-3.5.1.tgz
2021-12-29 17:30:35 +00:00
- New Hardware Support
B700 - Mixed BRI & Analog
B600 - Analog 4FXO/FXS
USB-FXO - USB Fxo device
wanpipe-3.4.9.tgz
2021-12-29 17:29:53 +00:00
wanpipe-3.5.1.tgz
2021-12-29 17:30:35 +00:00
- New Unified API for Linux & Windows
API Library - libsangoma
Unified Voice API for Linux & Windows
wanpipe-3.3.9.tgz
2021-12-29 17:21:41 +00:00
wanpipe-3.5.1.tgz
2021-12-29 17:30:35 +00:00
-More Info
http://wiki.sangoma.com/wanpipe-api
wanpipe-3.3.6.tgz
2021-12-29 17:20:09 +00:00
wanpipe-3.5.1.tgz
2021-12-29 17:30:35 +00:00
- SPAN mode API
- CHAN mode API
wanpipe-3.3.6.tgz
2021-12-29 17:20:09 +00:00
wanpipe-3.5.1.tgz
2021-12-29 17:30:35 +00:00
- Unified driver for Linux & Windows
- Updated BRI Stack and Support
- New BRI A500 & B700 firmware that fixes PCI parity errors.
On some systems A500 & B700 cards can generate parity errors.
wanpipe-3.3.6.tgz
2021-12-29 17:20:09 +00:00
wanpipe-3.5.1.tgz
2021-12-29 17:30:35 +00:00
- FreeSwitch Tested
- Update for 2.6.26 kernel
wanpipe-3.3.5.tgz
2021-12-29 17:19:39 +00:00
wanpipe-3.5.1.tgz
2021-12-29 17:30:35 +00:00
Note this is a major release. It has been fully regression
tested and stress tested in the lab and in the field.
wanpipe-3.3.6.tgz
2021-12-29 17:20:09 +00:00
wanpipe-3.2.6.tgz
2021-12-29 17:16:17 +00:00
wanpipe-2.3.4-10.tgz
2021-12-29 16:59:00 +00:00
- - END -