Harald Welte
51baa368ce
Scan over every odd E1 frame TS0 byte to check if the A-bit is set, indicating a remote alarm. If so, set yellow LED and report via the error flags communicated to the host by USB interrupt transfer. Change-Id: Ic4f57cf79bd32cf75f81ef3073cb8d4a2d1857d8 |
||
---|---|---|
.. | ||
common | ||
e1-tracer | ||
icE1usb | ||
LICENSE.gpl3 | ||
LICENSE.lgpl3 | ||
README |
README
Firmware for iCE40 based board ============================== The icE1usb, icE1usb-proto and e1-tracer boards are running very similar gateware, all based around a PicoRV32 RISC-V softcore supported by custom hardware cores to deal with USB and E1. License ------- Files in here are licended either under GPLv3 or LGPLv3 depending on the specific file. Refer to the notice at the top of each file. Full text for both licenses is included next to this README.