a32900b2b3
channel.h calls misdn_log_frame, but data is piped to syslog... still have kernel crashes with netdev.c:misdn_chan_frame_xmit
2006-05-05 10:04:52 +00:00
14774a420f
same same
2006-05-05 08:22:11 +00:00
7b48be70e0
stack ids 0x100,0x200 ... will create mISDN00,mISDN01 etc. devices
2006-05-05 08:19:49 +00:00
f95a570dbd
useless printk
2006-05-04 17:31:44 +00:00
aba7cf20e8
bugfix: list_add; sprintf still needs review!
2006-05-04 16:56:56 +00:00
78503c4a80
make it possible to enable netdev by setting the config variable in the main Makefile
2006-05-04 15:36:26 +00:00
46c23e5ddc
netdev_main.h doesn't exist anymore
2006-05-04 15:15:54 +00:00
790b0fb2e8
need the lapd_addr struct for the netdev stuff
2006-05-04 14:40:07 +00:00
c684d5e96d
added GPIO Check for the NT/TE Jumper settings for the 4S based cards. If the protocol Configuration does not match the Jumper Settings we print out a warning now. Thanks to Martin Bachen who submitted this patch.
2006-05-04 14:03:03 +00:00
534a86348f
added Linux Netdevice support to enable L1 hdlc frame debugging with ethereal, that's just a first shot and doesn't work proper yet. It needs to be compiled in with CONFIG_MISDN_NETDEV. also modified the misdn-init script to makes it possible to only load a specific driver (for better hotplug support)
2006-05-04 13:42:44 +00:00
88b1be3d4c
make it possible to install mISDN as non root via INSTALL_PREFIX
2006-04-30 17:49:34 +00:00
00a3255aa0
when ignoring the missing pcm frame clock we ignore in the init phase missing irqs as well
2006-04-26 16:50:22 +00:00
99fa436487
added dual port E1 card from beronet
2006-04-21 09:53:55 +00:00
92e4c668ac
missing linebreak at printk
2006-04-16 11:52:38 +00:00
4e0f56832c
describe test loops enables by module param
2006-04-12 10:37:28 +00:00
8e7e9cdf23
sysfs_remove_group does create a NULL Pointer reference since kernel 2.6.16 from inside of the class_unreg_device callbacks .. this works around it
2006-04-11 16:04:58 +00:00
28beb2274c
completed the module_param patch, now we compile on kernel <2.6.10 again
2006-04-11 13:13:30 +00:00
d5189f2f1e
Handle USR cards properly
2006-04-09 14:18:28 +00:00
9a3adc568d
workaround to fix unload Kernel Oops, it doesn't free the hc list so there will be some mem in use, but the kernel will not crash anymore which is far more important then this very small mem leak
2006-04-07 08:55:07 +00:00
851bbdceec
added BN2S card with 4S Chip :). Also fixed that the correct Subvendor IDs and Subdevice IDs are used and displayed, if some cards don't work mail me: cr@beronet.com. Advanced the misdn-init script to support the new 2S Card
2006-04-05 14:42:23 +00:00
7cac3cdb06
minor fixes, dos2unix lbreaks
2006-03-30 07:52:12 +00:00
ad79ac6564
same same
2006-03-29 17:27:52 +00:00
46d8409e91
fixed bug: using same loop counter twice in internal loop
2006-03-29 17:24:12 +00:00
d2bd2a6133
did remove the wrong file :-(
2006-03-23 13:52:18 +00:00
d6dd9d2951
not needed
2006-03-23 13:16:58 +00:00
ae3886bda9
mISDN_ctrl is already defined in mISDNif.h no need for ctrl.h (Yes EXPORT_SYMBOL was missing)
2006-03-23 13:11:43 +00:00
6c0f392d36
added ctrl.h for central managing the global mISDN_ctrl function
2006-03-23 12:31:17 +00:00
84beff43b5
make central control a global function
2006-03-23 10:05:16 +00:00
bec283bb85
fix typo
2006-03-22 23:29:59 +00:00
273ea59911
replace old MODULE_PARM stuff with module_param (Thanks to Stefan Schweizer)
2006-03-22 18:33:04 +00:00
3b80b6e75c
fix packed attribute warnings (Thanks to Stefan Schweizer)
2006-03-22 18:28:34 +00:00
104996ce94
.owner obsolete in kernel 2.6.16
2006-03-20 14:01:49 +00:00
6baa0d7b32
stop abusing dchannel pointer when line interface is meant
2006-03-17 07:43:41 +00:00
7375a33587
protect queueing ctrl urbs with spinlocks
2006-03-14 11:11:29 +00:00
b7ce29e545
added hack, which frees the irq of the whole card, even if only 1 port is released, this fixes the bad bad rmmod hfcmulti oops, still there are the sysfs related oopses, which at least do not actually freeze the machine. with this patch the module unloads correctly
2006-03-09 16:28:59 +00:00
ce4dbd587e
- using excact chip name for syslog messages:
...
XHFC-4SU_PI0_0_0_D means this is an XHFC-4SU at processor interface 0,
chip no 0, line interface 0, D Channel
2006-03-08 14:07:14 +00:00
885ab66510
changed GFP_KERNEL to GFP_ATOMIC for kmalloc to avoid sleep in a irq-lock (echo cancellor init code)
2006-03-08 12:06:10 +00:00
ebe6c8274c
- allocating required kernel mem depending on autodected XHFC derivate
2006-03-07 13:28:28 +00:00
2a8655f939
- supporting multiple XHFC controllers at one PCI2PI pci bridge
2006-03-06 16:20:33 +00:00
b267c6033f
- move branch mqueue to HEAD
2006-03-06 12:58:31 +00:00
56f18961c0
- make mqueue branch HEAD
2006-03-06 12:52:08 +00:00
44cf601712
PCI_DEVICE_ID_SITECOM_DC105 ---> PCI_DEVICE_ID_SITECOM_DC105V2
2005-11-19 14:01:41 +00:00
229883dd7d
- fixed unterminated device list
2005-11-15 10:10:34 +00:00
726e2a033e
pci_find_subsys do not longer exist
2005-10-26 19:35:09 +00:00
0d1253ce86
do not save flags in a register value
2005-10-26 14:13:19 +00:00
21466f9b7b
cleanup silence -> dsp_silence
2005-10-26 14:12:13 +00:00
786ab881f8
second fix for bug 7, component length was wrong
2005-06-26 11:35:40 +00:00
24f62a4c3c
Portability fixes:
...
- use cpu_to_leXX and leXX_to_cpu in order to access the PCI bus in little
endian mode on all architectures
- use pci_alloc_consistent instead of kmalloc to allocate buffer memory
2005-06-24 16:48:45 +00:00
65eaeb3579
Fix bug #0000007 Capidivert doesnt work with mISDN an Fritz! PCI
...
- DUMMY CR messages from up was not handled in l3_udss1
2005-06-24 15:33:13 +00:00
514a4ab48c
care for HW_POWERUP at l1 activation and force deactivation if activation fails (timer3)
2005-06-23 16:43:36 +00:00
Martin Bachem