* Microsoft callback (CBCP) is supported. Added a few more hints on how to
configure it.
* SPID has to be provided with colon separated from the telephone number
* added Teles 16.3 ISA and Sedlbauer Speedfax+ PCI as certified cards
* added comments that within EC certification for the driver is not needed
any more.
* added hints that cards with HFC chips are a bit more difficult to with
older hardware
* added additional question on why to use the RST-provoking mode/patch
* changed url of German translation of FAQ to www.wolf-b.de
* added links to [ixi|capi4linux|www].thepenguin.de
* AVM Fritz PCI v2 now supported
* NETspider U card now supported
* HFC-S+, HFC-SP/PCMCIA cards, HFC-USB ISDN TAs now supported
* Xircom Cardbus Eth10/100+ (PCMCIA) not supported except as terminal adapter
* Usage of capi driver is optional
* added question on how to see number of packets in Hisax with invalid CRC
* better trick to prevent Samba to trigger unwanted dialouts
* rates4linux url now sourceforge.net/projects/rates4linux
* logging stuff like reversed card and HFC card D channel logging only works
for BRI interface
Long awaited update, many small accumulated changes:
* Corrected url on project for passive card faxing
* Add hint to capidivert
* Add ST5481 based USB cards as supported
* Teles PCMCIA, 16.3c, PCI, S0Box are not experimental any more
* Some cards only work as modules
* More info on Sedlbauer cards
* Hint to configure Sedlbauer card with Hylafax parameter Class1SwitchingDelay
* Fritz!PCI card 2.0 now supported, but not thoroughly tested
* Fritz AVM firmware: get via perl script from calle.in-berlin.de
* Correct link to calle.in-berlin.de/pub/capi4linux
* Read-only card is possible next to point-to-point connection, if RX
is disconnected
* Corrected typo for switching from X.75 to HDLC
* Add dhcpd as reason for dod disaster
* More workarounds to avoid dod disaster with named and samba, correct typo
* ttyI* device can not accept both digital and analog modem dialins
* Can set fixed ip address per user in pap/chap-secrets
* For D-channel logging your card should be HiSax type 35 or 37
* HFC-S chipset cards are now certified
* Fritz! PCI card 2.0 will not be supported any time soon
* Added link to www.fli4l.de (one-floppy-disk isdn router software)
* Brazil: can also use Teles 16.3c
* Give Traverse Technologies (www.ttcomms.com) credit for helping to
get NI-1 support into HiSax
Small update:
* Can not pretend to be PBX in NT mode
* AVM A1+ not supported
* PBX may add 0 on incoming calls
* find out dynamic ip address in ip-up
* Cisco keepalive works
* MPPP support needs to be compiled into modules
* Microsoft Callback (CBCP) is not supported
* NI-1 has been implemented, however unknown whether 5ESS works in NorthAmerica.
* added link to homepage of maKs (configuration software for Ackermann
Euracom)
* more background & configuration information on dialin via GSM phone
* added reference to article 'Des Surfers Bastelstunde' in ct 7/2001.
* NT mode is only physical connection, ISDN protocols for NT mode currently not
available
* IRQ sharing: supported, but BIOS bug with some motherboards may give
trouble
* Sedlbauer: analog modem supported up to 14400
* Troubleshooting: call yourself, then check for 'Call from 0,1,2345 -> 6789'
* Dialout on fixed B channel: undocumented HiSax feature
* dod_netscape: more potential dialout problems, and workarounds
* dod_closeipconnect: solution probably only possible with RST-Provoking
patch, but workaround with firewall rules for 2.2.x kernels
* Split line: can configure split line (1 B channel leased, 1 = dialout), but
can only use one at any point in time
* fixed DTMF parameter names
* Major update, caught up with my emails since September
* Added link to www.avm/ftp/cardware/fritzcrd/linux/index.htm
* Added link to www.hylafax.org, and www.mnd.fh-wiesbaden.de/~dreymann/linux
* Update to ipx usage, warning for dod disaster
* Added link to diald.sourceforge.net
* Added more information on isdn4linux' features: eurofile, leased line,
point-to-point mode, chargeint, reversed card, nt mode/crossed cable, ...
* Encourage to give kernel, i4l/hisax, and card version when writing to
mailing list
* Hardware on Sun: does not really work
* More information for I-Surf 1.0 (dedicated question)
* Added question on how to start/stop ISDN without rebooting
* Updated V.110 usage, use S19=0 only with problematic PBX
* Added question on how to get maximum debug output
* Added hint on how to check for assigned interrupt, and on BIOS PnP OS option
* Added hint on ip_resend and ip_resend_wakeup programs
* Added hint on ms-get-dns option for ipppd
* Added hint to check tcp retry parameters on unwanted dialouts
* Clearer explanation on how the callback mechanism works, and how to work
around linklevel design bug
* More information to enable HFC cards to work with isdnlog
* Added question on how to tune DTMF recognition
* MSN in UK has to have 6 digits, even if telephone number w/o area code is
only 5 digits!?
* Added question on which standards apply to the ISDN protocol layers
* Updated glossary, added several new items: leased line, NT, NT mode,
multi-device mode, ...
* Added link to www.topf-sicret.de/help/capi20.html
* Hint on how to use modem for Sedlbauer card
* yaps sample config on www.tnt-computer.de/linux/yaps-suite1-1.tgz
* German Telekom cards are all supported
* added url to unofficial Eumex driver
* added hardware specific hints on Fritz! card
* faster bind answer, when triggering dialout
* changed address of faq homepage to http://www.mhessler.de/i4lfaq/
* added hint on question config_links to begin of FAQ
* added link to new vbox site
* added question about workaround on dod disaster for bind in forwarding
mode and only one forwarder address
* more hints on msn for UK
* fixed url for fax project
* mentioned binary driver for AVM Fritz card for CAPI 2.0
* use kernel 2.0.x for 486 or lower
* how many msns are possible at max
* how many devices are supported
* difference flat rate and leased line
* more hints on how to get Sedlbauer Speedfax to work
* LCR with isdnlog requires ABC extensions
* mentioned unofficial binary driver for Eumex 404
* ippp0 absolutely required for ipppd.