first one supplied. Now it works also if the first device is the
slave device.
(Prevents bogus "Sorry - this system lacks PPP kernel support" messages.)
- dont set the Provider-field of the MySQL DB to "?*? ???" on incoming calls
- implemented
0190029 Telebillig (17,5 Cent/minute to any cellphone)
0190031 Teledump
0190035 TeleDiscount
0190037 Fonfux (1,5 Cent/minute german-call)
0190087 Phonecraft
you have to change:
1. "/etc/isdn/rate.conf" - add the following:
P:229=0 #E Telebillig
P:231=0 #E Teledump
P:235=0 #E TeleDiscount
P:237=0 #E Fonfux
P:287=0 #E Phonecraft
2. "/etc/isdn/isdn.conf" (or "/etc/isdn/callerid.conf"):
VBN = 010
to
VBN = 010:01900
Tatahhh: isdnlog speaks Euro :-)
Many thanks to Bernhard Schmidt (berni@birkenwald.de)!
** At least, you have to install "/usr/lib/isdn/rate-de.dat"
** and modify your "/etc/isdn/isdn.conf" or "/etc/isdn/callerid.conf"
** to read:
** [ISDNLOG]
** CURRENCY = 0.062,EUR
I wish all of you a happy new year!
- verified Leo's correction of Paul's byte-order independent Patch to the CDB
(now it's Ok, Leo, and *many* thanks to Paul!)
- "rate-de.dat" updated
- added "-Q" option to isdnlog
Long awaited update, many small accumulated changes:
* Corrected url on project for passive card faxing
* Add hint to capidivert
* Add ST5481 based USB cards as supported
* Teles PCMCIA, 16.3c, PCI, S0Box are not experimental any more
* Some cards only work as modules
* More info on Sedlbauer cards
* Hint to configure Sedlbauer card with Hylafax parameter Class1SwitchingDelay
* Fritz!PCI card 2.0 now supported, but not thoroughly tested
* Fritz AVM firmware: get via perl script from calle.in-berlin.de
* Correct link to calle.in-berlin.de/pub/capi4linux
* Read-only card is possible next to point-to-point connection, if RX
is disconnected
* Corrected typo for switching from X.75 to HDLC
* Add dhcpd as reason for dod disaster
* More workarounds to avoid dod disaster with named and samba, correct typo
* ttyI* device can not accept both digital and analog modem dialins
* Can set fixed ip address per user in pap/chap-secrets
* For D-channel logging your card should be HiSax type 35 or 37
* HFC-S chipset cards are now certified
- Using notifier exitnotify and phasechange with pppd 2.4.1 and after.
- Fixed problems with holdoff.
- Demand wakeup request will be handled when reaching PHASE_DEMAND.
Wakeup paket will be retransmitted every second until PHASE_SERIALCONN
is reached.
errorcode variable "status" resulting in a disconnect immediatly
after trying to setup the connection. Now "status" will be reseted
wenn phase demand or serialconn is reached.
- creating the zone files works on sparc
- CDB files created on e.g. intel can be used without problem om sparc
Our copy of CDB has also been modified for this.
- creating the zone files works on sparc
- CDB files created on e.g. intel can be used without problem om sparc
Our copy of CDB has also been modified for this.