MelwareDE
|
0f986eebc9
|
RTP changes for asterisk 1.8
|
2011-08-30 19:20:05 +00:00 |
MelwareDE
|
6307669221
|
Added missing cause message for CUG.
|
2011-08-07 14:31:05 +00:00 |
MelwareDE
|
49d3f54fcc
|
Add support for tx stream counter polling
|
2011-07-01 20:30:39 +00:00 |
MelwareDE
|
7cb0fe0e8f
|
/dev/mem is accessible for root user only. Implement system call instead of mapping using /dev/mem to access stream counter.
|
2011-06-14 21:17:01 +00:00 |
MelwareDE
|
00b4758564
|
Fixed descriptor leak
|
2011-06-14 11:34:59 +00:00 |
MelwareDE
|
c1e0bc653b
|
Fixed triggered by disconnect collision crash
|
2011-05-11 09:03:17 +00:00 |
MelwareDE
|
43e2232a0e
|
Activate work around for processing fast sequences of CPN/DTMF/KEY events. Please see main/channel.c (call to tech->read or tech.read and processing of DTMF frames).
|
2011-04-29 09:44:26 +00:00 |
MelwareDE
|
4411cbc18c
|
Work around processing of fast sequence of events (overlapped receiving of called party number)
|
2011-04-21 21:04:29 +00:00 |
MelwareDE
|
f0c37c2067
|
Allow to Dial without sending complete i.e. This is necessary if dialing is done in overlapped mode but signeling network does not supports sending of initla message witout CPN: SS7 IAM without CPN results in protocol error if send to switch (vendor?) but works B2B with Diva.
|
2011-04-21 20:44:45 +00:00 |
MelwareDE
|
c5a0982ee5
|
Add support for host based protocol code
|
2011-04-13 10:39:05 +00:00 |
MelwareDE
|
c4bc7f524b
|
Spelling
|
2011-04-01 08:55:49 +00:00 |
MelwareDE
|
78fd7fb7e5
|
Only noise supression command should be sent to Data PLCI
|
2011-03-07 09:57:43 +00:00 |
MelwareDE
|
524cc0f1ac
|
Move data related debug output to verbosity level 8
|
2011-03-07 09:56:52 +00:00 |
MelwareDE
|
21aa254147
|
Add distclean and sysclean clean targets (for development use).
|
2011-02-04 17:41:46 +00:00 |
MelwareDE
|
274a293f76
|
Add access to Diva trace driver
|
2011-02-04 17:37:27 +00:00 |
MelwareDE
|
b684805ca1
|
Restored compilation with version 1.2
|
2011-02-04 17:36:26 +00:00 |
MelwareDE
|
53915531f5
|
Add copyright
|
2011-02-04 17:23:43 +00:00 |
MelwareDE
|
578b7005c7
|
Add module to write traces to Diva trace driver. Restore compilation with version 1.2
|
2011-02-04 17:18:05 +00:00 |
MelwareDE
|
08db9b6db3
|
Do not update CAPI LI state if PLCI is about to be removed. This reduces the overall sysm load in case high amount of users leaves the conference
|
2011-01-12 00:15:34 +00:00 |
MelwareDE
|
58cf952292
|
Add sending of CALL PROCEEDING messages
|
2010-12-21 19:14:27 +00:00 |
MelwareDE
|
ca1b241cdf
|
For unknown reason NULL PLCI queue is not properly processed while line interconnect is in process. The queue grows from line interconnect to line interconnect and causes long delay. This behavior to be investigated. Current solutionis to drom queue if exceeds practicelly acceptable limits
|
2010-12-17 12:10:14 +00:00 |
MelwareDE
|
bad928afca
|
Add 'capi show bridges' to show used by group based conference resources. Add information about state of tx stream to 'capi show resources'
|
2010-12-16 23:11:31 +00:00 |
MelwareDE
|
02d04c7e9d
|
Use const to improve optimization
|
2010-12-16 23:05:00 +00:00 |
MelwareDE
|
22833e5ec7
|
Group based conference, debug
|
2010-12-16 14:28:46 +00:00 |
MelwareDE
|
c4a5d9e6d4
|
Allow use of group based conference for resource PLCIand for TDM connections
|
2010-12-15 21:05:26 +00:00 |
MelwareDE
|
b75d1cbc3e
|
Group based conference, calculate size of group dependent on the type of controller
|
2010-12-14 22:12:41 +00:00 |
MelwareDE
|
6decf34007
|
Group based conference, remove groups only if enture conference is in idle state, clean up
|
2010-12-14 16:28:18 +00:00 |
MelwareDE
|
3c491e7f65
|
Group based conference, cleanup conference bridges if not in use
|
2010-12-13 22:19:16 +00:00 |
MelwareDE
|
601e88e668
|
Pretty formatting for 'capi chatinfo' to accomodate long SIP names
|
2010-12-13 08:45:35 +00:00 |
MelwareDE
|
a952dcd336
|
Add group based conference, in progress
|
2010-12-10 22:46:01 +00:00 |
MelwareDE
|
2a83825aaf
|
Show bridge resources
|
2010-12-10 21:29:37 +00:00 |
MelwareDE
|
ac9d6b319b
|
chan_connect, fixed calculation of the controller group
|
2010-11-29 08:42:34 +00:00 |
MelwareDE
|
733395c63d
|
Crash if controller list is sparse
|
2010-11-26 17:11:07 +00:00 |
MelwareDE
|
47a34d4bb9
|
chat_connect connection was established only after next user joined the conference
|
2010-11-26 16:57:43 +00:00 |
MelwareDE
|
c8baf15baa
|
Implement chat_connect for all supported Diva hardware
|
2010-11-24 21:44:22 +00:00 |
MelwareDE
|
a60f4cf67a
|
Add chat_connect to interconnect two chat roouss using NULL PLCI
|
2010-11-24 17:08:11 +00:00 |
MelwareDE
|
29581c9637
|
Compatibility with 1.4
|
2010-11-22 14:19:14 +00:00 |
MelwareDE
|
e0484c4db5
|
Reset EC if hold reported by netwwork
|
2010-11-10 14:07:51 +00:00 |
MelwareDE
|
9f1b2b83cc
|
Update connected line info after reception of Called Party Name
|
2010-11-09 09:20:29 +00:00 |
MelwareDE
|
9a3483e6a0
|
Process Party Changed Events. Update Connected Name
|
2010-11-09 09:03:41 +00:00 |
MelwareDE
|
80b5145d6b
|
Add/Update copyright
|
2010-11-08 10:13:48 +00:00 |
MelwareDE
|
3b577b11ad
|
Update
|
2010-11-08 10:13:27 +00:00 |
MelwareDE
|
ab7eff3897
|
Add AMI action CapichatRemove
|
2010-11-06 18:38:52 +00:00 |
MelwareDE
|
7bbeb7ecf6
|
Add AMI interface
|
2010-11-06 18:01:35 +00:00 |
MelwareDE
|
4f4b5bb6b6
|
Add device state for interfaces
|
2010-11-05 21:58:49 +00:00 |
MelwareDE
|
e4de99914f
|
Add device state for chat conference rooms
|
2010-11-05 13:13:12 +00:00 |
MelwareDE
|
d55a1dae94
|
Move AMI related functionality to common file
|
2010-11-05 13:12:43 +00:00 |
MelwareDE
|
66562edbcc
|
CapichatList is now a single source of information about conference members
|
2010-11-05 09:58:12 +00:00 |
MelwareDE
|
420fdc352d
|
Add CapichatJoin, CapichatLeave and CapichatEnd events
|
2010-11-04 22:16:49 +00:00 |
MelwareDE
|
67b363c1c1
|
Remove locks taken in the wrong order. Asterissk own code does not lock a channel if accessing fields as readonly (what happend if referenced by fields memory is freed while accessed?)
|
2010-11-04 19:57:26 +00:00 |