MelwareDE
df76b6a213
- Added 3PTY patch by Simon Peter.
2006-12-18 22:18:16 +00:00
MelwareDE
61f051745e
- Added information and changed example for tx/rx gains.
2006-12-02 10:08:50 +00:00
MelwareDE
f33a143924
- Make capicommand(echocancel) setting non-permanent.
...
Setting is restored after hangup.
2006-11-25 16:13:40 +00:00
MelwareDE
8a0d8977be
- Added sendfax feature and enhanced result/status variables after
...
FAX actions.
2006-06-27 14:54:03 +00:00
MelwareDE
32e06de3b8
Dropped compatibility stuff for older Asterisk versions.
...
You need at least Asterisk 1.2.x now.
2006-06-24 11:53:47 +00:00
MelwareDE
c6d777d26a
- allow one controller number per specified interface only.
2006-06-18 20:57:56 +00:00
MelwareDE
8d8020949e
- added hint for faxdetect
2006-05-27 12:52:28 +00:00
MelwareDE
f1318438d3
- added capicommand(echocancel|on/off) to dynamically en/disable CAPI
...
echo-chancel.
2006-05-21 12:10:53 +00:00
MelwareDE
badd38d9a2
- use 'trans' instead of 'voice' for bproto desc.
...
- don't use RTP in digital mode
2006-05-18 14:36:09 +00:00
MelwareDE
059bdfe0df
- added more info shown with CLI command 'capi show channels'
2006-04-03 20:44:08 +00:00
MelwareDE
9671c6df5c
- removed custom function VANITYNUMBER, this does not belong
...
into a channel driver.
2006-04-01 11:37:02 +00:00
MelwareDE
0d75a3e5af
Undo test commit.
2006-02-15 18:24:08 +00:00
MelwareDE
69d0731ead
Test commit.
2006-02-15 18:21:09 +00:00
MelwareDE
c828da398a
- added better compatibility for OpenPBX code creation.
...
- added first code for RTP over CAPI for Eicon DIVA Server cards.
2006-01-30 23:40:28 +00:00
MelwareDE
9f350c412a
- added hint about fax variables
2005-12-29 16:38:40 +00:00
MelwareDE
2e62ad0306
- clean up and OpenPBX portability.
2005-11-20 16:15:33 +00:00
MelwareDE
a46a970640
- allow setting a callerid in the dial() command without changing
...
the original channel callerid.
2005-10-09 16:45:03 +00:00
MelwareDE
a9192a9555
- added config 'defaultcid' to set a default caller id which will be
...
used if dial option 'd' is specified.
2005-10-09 15:49:32 +00:00
MelwareDE
e6911c60e8
- when 'o' option is used for overlap dialing, don't send any digits
...
with the CONNECT_REQ. This gives better progress together with 'b'.
2005-10-01 17:00:56 +00:00
MelwareDE
b65c13d415
- create a pseudo channel for each interface for incoming signalling
...
without B-channel.
2005-10-01 15:17:10 +00:00
MelwareDE
6cd5172099
Added Line Interconnect to list of supported features.
2005-09-17 19:08:28 +00:00
MelwareDE
d73253a545
Added custom function VANITYNUMBER to convert letters into digits.
2005-09-17 10:49:34 +00:00
MelwareDE
8f30035ca2
Added Wait() for ECT
2005-09-16 12:38:16 +00:00
MelwareDE
e3cb5c02cf
Added BSD compatibility, thanks to Hans Petter Selasky.
2005-09-11 08:39:29 +00:00
MelwareDE
62d1b685d2
Added description on new variables for subaddressing.
2005-09-10 14:17:50 +00:00
MelwareDE
607251ff79
small fix and cleanup
2005-08-31 21:15:43 +00:00
MelwareDE
398aa1b09f
- added variable REDIRECTREASON
...
- use stack memory for capi_number()
- use struct for capicommand() commands
- capicommand(RETRIEVE) can now be called from other channels
- start PBX on SETUP only.
2005-08-28 14:14:23 +00:00
MelwareDE
7ee382db9e
Set temporary holdtype via capicommand().
2005-08-25 19:30:31 +00:00
MelwareDE
d2aabadbff
Added description on used variables.
2005-08-25 17:35:21 +00:00
MelwareDE
e7351dea35
chan_capi_pvt.h does not exist any more.
2005-08-22 07:53:36 +00:00
MelwareDE
aef27548d5
ECT should work now (not yet really tested).
2005-08-21 15:35:44 +00:00
MelwareDE
ab3ff868aa
- moved ECT to capicommand() (not working yet)
...
- added HOLD/RETRIEVE for Asterisk indications.
2005-08-21 10:28:43 +00:00
MelwareDE
df6009a9af
Moved 'hold' and 'retrieve' to capicommand().
2005-08-16 18:25:03 +00:00
MelwareDE
d057edc4e7
MCID is now done via capicommand()
2005-08-14 14:57:04 +00:00
MelwareDE
202a55682e
Enable/Disable echosquelch via capicommand().
2005-08-14 13:59:16 +00:00
MelwareDE
743e63fbf7
Receive a fax via CAPI is now done with capicommand(receivefax|...)
2005-08-14 12:32:18 +00:00
MelwareDE
8f8b5bd30c
- Fixed call-deflection and moved this feature from separate application
...
to capicommand().
2005-08-13 18:21:20 +00:00
MelwareDE
088f3a9c8e
Support 'type of number' (numbering-plan).
2005-08-07 19:24:06 +00:00
MelwareDE
c587025a3c
Allow using interface name in Dial().
2005-07-27 18:17:41 +00:00
MelwareDE
e90739c7e8
- capi.conf structure changes: one own section for each interface,
...
no global 'interfaces' any more. Section name will be interface name.
- restructured module loading and init.
- dial string changed: parameters like 'b' no in number any more.
- send alert on alerting only (busy() and congestion() work now).
- better overlap sending (new parameter 'o' for dialstring to
send only the first two digits with CONNECT_REQ only, the remaining
digits and even digits following the dial() command, will be send
as INFO_REQ/Overlap).
2005-07-17 19:01:14 +00:00
MelwareDE
9369d93abe
Removed application CallingPres() and use the correct SetCallerPres()
...
settings.
2005-07-13 15:07:31 +00:00
MelwareDE
32448a4482
gX in the dialstring may be a list of groups or a range.
2005-07-03 12:15:14 +00:00
MelwareDE
91cc466ca7
Fixed segfault when hangupcause is set to late.
2005-06-26 13:34:17 +00:00
MelwareDE
806cfe6c9c
cleanup
2005-06-07 04:26:12 +00:00
MelwareDE
376160b461
- added capiFax feature by Frank Sautter
...
- further cleanup
2005-06-04 14:28:52 +00:00
MelwareDE
c16ca054a5
Initial import of new chan_capi.
2005-06-02 18:47:35 +00:00