phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
uboot-mt623x/board/gth
History
wdenk 2535d60277 * Patch by Martin Krause, 17 Jul 2003: 
add delay to get I2C working with "imm" command and s3c24x0_i2c.c

* Patch by Richard Woodruff, 17 July 03:
  - Fixed bug in OMAP1510 baud rate divisor settings.

* Patch by Nye Liu, 16 July 2003:
  MPC860FADS fixes:
  - add MPC86xADS support (uses MPC86xADS.h)
  - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
    o PLPRCR changes
    o BRG changes (EXTAL/XTAL restricted to 10MHz)
    o don't trust gclk() software measurement by default, depend on
      CONFIG_8xx_GCLK_FREQ
  - add DRAM SIMM not installed detection
  - use more "correct" SDRAM initialization sequence
  - allow different SDRAM sizes (8xxADS has 8M)
  - default DER is 0
  - remove unused MAMR defines from FADS860T.h (all done in fads.c)
  - rename MAMR/MBMR defines to be more consistent. Should eventually
    be merged into MxMR to better reflect the PowerQUICC datasheet.

* Patch by Yuli Barcohen, 16 Jul 2003:
  support new Motorola PQ2FADS-ZU evaluation board which replaced
  MPC8260ADS and MPC8266ADS
 		2003-07-17 23:16:40 +00:00
..
Makefile * Code cleanup: 2003-06-27 21:31:46 +00:00
README * Code cleanup: 2003-06-27 21:31:46 +00:00
config.mk * Code cleanup: 2003-06-27 21:31:46 +00:00
ee_access.c Initial revision 2002-08-17 09:36:01 +00:00
ee_access.h Initial revision 2002-03-08 21:31:05 +00:00
ee_dev.h Initial revision 2002-03-08 21:31:05 +00:00
flash.c * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length 2003-05-30 12:48:29 +00:00
gth.c * Patch by Martin Krause, 17 Jul 2003: 2003-07-17 23:16:40 +00:00
u-boot.lds * Code cleanup: 2003-06-27 21:31:46 +00:00

README 

Written by Thomas.Lange@corelatus.com 010805

To make a system for gth that actually works ;-)
the variable TBASE needs to be set to 0,1 or 2
depending on location where image is supposed to
be started from.
E.g. make TBASE=1

0: Start from RAM, base 0

1: Start from flash_base + 0x10070

2: Start from flash_base + 0x30070

When using 1 or 2, the image is supposed to be launched
from miniboot that boots the first U-Boot image found in
flash.
For miniboot code, description, see www.opensource.se