7a635e004e
Add support for Freescale M5271: Merge with /work/u-boot.mcf5271
2006-04-27 19:12:19 +02:00
6ca24c64a5
Add support for BC3450 board
...
Signed-off-by: dzu@denx.de <dzu@denx.de>
2006-04-21 18:30:47 +02:00
a367d42640
Update for NC650 board. Add NC650 based CP850 configuration.
...
Signed-off-by: dzu@denx.de <dzu@denx.de>
2006-04-19 11:52:46 +02:00
8419c01304
MPC5200: enable snooping of DMA transactions on XLB even if no PCI
...
is configured; othrwise DMA accesses aren't cache coherent which
causes for example USB to fail.
2006-04-18 11:05:03 +02:00
cf48eb9abd
Some code cleanup
2006-04-16 10:51:58 +02:00
807522fc9a
Merge with /home/hs/U-Boot/u-boot-dev
2006-04-16 10:27:31 +02:00
b81a4630a3
Fix Quad UART mapping on MCC200 board due to new HW revision
2006-04-13 16:35:22 +02:00
b28a31ca02
Merge with /home/m8/git/u-boot
2006-04-12 12:26:32 +02:00
ad88297e2f
* Fix dbau1x00 Board
...
- Fix dbau1x00 boards broken by dbau1550 patch
PLL:s were not set for boards other than 1550.
Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
Default boot is now bootp for cards other than 1550.
Patch by Thomas Lange Aug 10 2005
2006-04-11 14:53:29 +02:00
bb74140def
Fixes common/cmd_flash.c:
...
- fix some compiler/parser error, if using m68k tool chain
- optical fix for protect on/off all messages, if using more
then one bank
Patch by Jens Scharsig, 28 July 2005
2006-04-11 14:39:21 +02:00
5fbb2cd3b1
Update CHANGELOG
2006-04-06 11:35:18 +02:00
71b405df4e
Merge with /home/sr/git/u-boot/cfi-flash
2006-04-06 00:16:58 +02:00
197b049b8b
Merge with /home/sr/git/u-boot/4xx-sdram
2006-04-05 23:55:15 +02:00
db28ddb4da
Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S
...
Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
2006-04-03 15:46:10 +02:00
534ff676a9
* Add support for ymodem protocol download
...
Patch by Stefano Babic, 29 Mar 2006
* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000
Merge with /home/mk/8-benq/u-boot
2006-04-01 15:52:46 +02:00
2662b40cac
* Changes/fixes for drivers/cfi_flash.c:
...
- Add Intel legacy lock/unlock support to common CFI driver
On some Intel flash's (e.g. Intel J3) legacy unlocking is
supported, meaning that unlocking of one sector will unlock
all sectors of this bank. Using this feature, unlocking
of all sectors upon startup (via env var "unlock=yes") will
get much faster.
- Fixed problem with multiple reads of envronment variable
"unlock" as pointed out by Reinhard Arlt & Anders Larsen.
- Removed unwanted linefeeds from "protect" command when
CFG_FLASH_PROTECTION is enabled.
- Changed p3p400 board to use CFG_FLASH_PROTECTION
Patch by Stefan Roese, 01 Apr 2006
* Changes/fixes for drivers/cfi_flash.c:
- Correctly handle the cases where CFG_HZ != 1000 (several
XScale-based boards)
- Fix the timeout calculation of buffered writes (off by a
factor of 1000)
Patch by Anders Larsen, 31 Mar 2006
2006-04-01 13:44:14 +02:00
d87080b721
GCC-4.x fixes: clean up global data pointer initialization for all boards.
2006-03-31 18:32:53 +02:00
3511853943
Reorder CHANGELOG
2006-03-31 15:18:37 +02:00
62534beb2f
Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
...
405 SDRAM: - The SDRAM parameters can now be defined in the board
config file and the 405 SDRAM controller values will
be calculated upon bootup (see PPChameleonEVB).
When those settings are not defined in the board
config file, the register setup will be as it is now,
so this implementation should not break any current
design using this code.
Thanks to Andrea Marson from DAVE for this patch.
440 DDR: - Added function sdram_tr1_set to auto calculate the
TR1 value for the DDR.
- Added ECC support (see p3p440).
Patch by Stefan Roese, 17 Mar 2006
2006-03-31 14:32:07 +02:00
f6dbbe9864
Update CHANGELOG
2006-03-25 18:42:54 +01:00
05d8dce9d0
Enable Quad UART om MCC200 board.
2006-03-23 17:10:30 +01:00
5725f94aac
Cleanup MCC200 board configuration; omit non-existent stuff.
2006-03-21 01:58:07 +01:00
0b6ba547fa
Update CHANGELOG
2006-03-19 01:01:51 +01:00
0a112d8696
Merge with port of MPC8349EMDS board
2006-03-17 17:41:56 +01:00
09e4b0c5d3
Add support for Lite5200B board.
...
Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
2006-03-17 11:42:53 +01:00
d326f4a242
Add command for handling DDR ECC registers on MPC8349EE MDS board.
2006-03-16 15:19:35 +01:00
97f98001a3
Fix DDR ECC bit definitions for MPC83xx.
2006-03-16 14:35:32 +01:00
991425fe05
Add initial support for MPC8349E MDS board.
2006-03-14 16:24:38 +01:00
4c8d1ecce2
Add support for ECC DDR initialization on MPC83xx.
2006-03-14 16:23:35 +01:00
61f25155ac
Add DMA support for MPC83xx.
2006-03-14 16:14:48 +01:00
6d8ae5abb5
Add sync in do_reset() routine for MPC83xx after RPR register
...
was written to. It is need on some targets when BAT translation
is enabled.
2006-03-14 16:12:48 +01:00
e24e0f0744
Add bit definitions for MPC83xx DDR controller registers.
2006-03-14 16:03:46 +01:00
cd94ba397e
Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.
2006-03-14 16:02:31 +01:00
a7c66ad2e5
Correct shift offsets in icache_status and dcache_status for MPC83xx.
2006-03-14 16:01:25 +01:00
6e53e27c50
Add support for DS1374 RTC chip.
2006-03-14 15:59:25 +01:00
ff7fefe679
Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific timer and
...
cpu_reset code from cpu/$(CPU) into the new cpu/$(CPU)/$(SOC) directories
Patch by Andreas Engel, 13 Mar 2006
2006-03-13 12:37:35 +01:00
86f5f0342d
Fix CHANGELOG entry (patch date)
2006-03-13 12:22:03 +01:00
15940c9af3
Change max size of uncompressed uImage's to 8MByte and add
...
CFG_BOOTM_LEN to adjust this setting.
As mentioned by Robin Getz on 2005-05-24 the size of uncompressed
uImages was restricted to 4MBytes. This default size is now
increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN
in the board config file.
Patch by Stefan Roese, 13 Mar 2006
2006-03-13 11:16:36 +01:00
f3fecfe6d7
Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c
...
Patch by Stefan Roese, 13 Mar 2006
2006-03-13 09:43:01 +01:00
9a7b408c11
cpu/ppc4xx/start.S : exceptions are enabled after relocation
...
Patch by Cedric Vincent, 6 June 2005
2006-03-13 09:42:28 +01:00
9551530615
au1x00_eth.c: check malloc return value and abort if it failed
...
Patch by Andrew Dyer, 26 Jul 2005
2006-03-13 01:00:22 +01:00
c15f80eaef
Change the sequence of events in soft_i2c.c:send_ack() to keep from
...
incorrectly generating start/stop conditions on the bus.
Patch by Andrew Dyer, 26 Jul 2005
2006-03-13 00:50:48 +01:00
b38dbd4622
Fix bug in [id]cache_status commands for MPC85xx processors;
...
should look at LSB of L1CSRn registers to determine if L1 cache is
enabled, not the MSB.
Patch by Murray Jensen, 19 Jul 2005
2006-03-13 00:46:05 +01:00
f07217c9e2
Fix array overflow with fw_setenv on uninitialised environment
...
Patch by Murray Jensen, 15 Jul 2005
2006-03-12 23:27:46 +01:00
84c960ce6d
Add support for EmbeddedPlanet EP88x boards
...
Patch by Yuli Barcohen, 13 Jul 2005
2006-03-12 23:17:31 +01:00
763b5f34c3
Remove board specific configuration includes from the common xilinx
...
ethernet and iic adapter code.
Patch by Michael Libeskind, 12 Jul 2005
2006-03-12 23:13:27 +01:00
be5048f166
Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver
...
Patch by Murray Jensen, 08 Jul 2005
2006-03-12 22:50:55 +01:00
ca27381df1
Add (some) definitions for the MPC85xx local bus controller
...
Patch by Murray Jensen, 08 Jul 2005
2006-03-12 22:45:47 +01:00
8123eee875
Add CPM2 I/O pin functions for MPC85xx processors
...
Patch by Murray Jensen, 08 Jul 2005
2006-03-12 22:41:33 +01:00
7c60908ffb
Fix compile problem
2006-03-12 22:14:20 +01:00
Marian Balakowicz