d526de33d8
Merge with /home/sr/git/u-boot/denx-merge-sr
2007-01-30 14:38:21 +01:00
6304430ed6
[PATCH] alpr: Update alpr board config file
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-30 12:51:07 +01:00
f8db84f132
LPC2292 SODIMM port coding style cleanup.
2007-01-30 00:50:40 +01:00
6bd2447ee4
Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
2007-01-24 12:16:56 +01:00
b78bb469f5
Merge with /home/tur/proj/idmr/u-boot
2007-01-24 10:26:47 +01:00
2daf046ba6
[iDMR] Add MTD and JFFS2 support, also add default partition definition.
2007-01-23 17:22:06 +01:00
f7db33101f
[iDMR] Flash driver on initialisation write-protects some sectors,
...
currently sectors 0-3. Sector 3 does not need to be protected, though
(U-boot occupies sectors 0-1 and the environment sector 2). This commit
fixes this, i.e., only sectors 0-2 are protected.
2007-01-23 14:21:14 +01:00
0ed47bb119
[iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
...
"mii device" results in "Unexpected exception"). Fixing this properly
requires some clean-up in the FEC drivers infrastructure for ColdFire, so
this commit disables MII commads for now.
2007-01-23 14:11:22 +01:00
363d1d8f9c
[ColdFire MCF5271 family] Add CPU detection based on the value of Chip
...
Identification Register (CIR).
2007-01-23 13:25:22 +01:00
a401239664
Minor code cleanup.
2007-01-19 23:08:39 +01:00
2ed5594649
Merge with /home/hs/SC3/u-boot-dev
2007-01-19 22:56:23 +01:00
f539b7ba7d
[PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
...
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-01-19 19:57:10 +01:00
d0b6e14087
[PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
...
if you must swap the bytes between reading/writing.
(Needed for the SC3 board)
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-01-19 18:05:26 +01:00
15e5025a73
Merge with /home/hs/SC3/u-boot-dev
2007-01-19 12:06:32 +01:00
9d8d5a5bfb
[PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-18 16:05:47 +01:00
0057d758e3
[PATCH] Update Prodrive P3Mx support
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-18 11:54:52 +01:00
34167a36c2
[PATCH] Add missing Taishan config file
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-18 11:48:10 +01:00
cb4820725e
[PATCH] Fix: Compilerwarnings for SC3 board.
...
The EBC Configuration Register is now by CFG_EBC_CFG definable
Added JFFS2 support for the SC3 board.
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-01-18 11:28:51 +01:00
3a83ee3021
Merge with /home/stefan/git/u-boot/denx-merge-sr
2007-01-18 10:27:26 +01:00
5fb692cae5
[PATCH] Add support for AMCC Taishan PPC440GX eval board
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-18 10:25:34 +01:00
6d3e010723
Raname solidcard3 into sc3; add redundant env for sc3
2007-01-16 18:30:50 +01:00
1bbbbdd20f
Update default environment for Solidcard3
2007-01-16 12:46:35 +01:00
f11033e739
Merge with /home/hs/SC3/u-boot
...
Some code cleanup.
2007-01-15 13:41:04 +01:00
ddd4123336
Merge with /home/hs/MAN/u-boot-dev
2007-01-15 12:56:52 +01:00
9c3b365a88
Merge with /home/sr/git/u-boot/denx-merge-sr
2007-01-15 12:48:05 +01:00
5a5c56986a
[PATCH] Fix 440SPe rev B detection from previous patch
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-15 09:46:29 +01:00
a443d31410
[FIX] correct I2C Writes for the LM81 Sensor.
...
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-01-14 13:35:31 +01:00
b8a8bfc0c6
Merge with /home/sr/git/u-boot/denx-merge-sr
2007-01-13 11:25:08 +01:00
c6676c73dc
Merge with /home/git/u-boot
2007-01-13 11:17:35 +01:00
0bba545283
Undo commit 3033ebb2: reset command does not take any arguments
...
Haiying Wang's modification to the reset command was broken, undo it.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-01-13 11:17:10 +01:00
44cd6de2e1
Merge with git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx-merge-sr
2007-01-13 08:01:31 +01:00
95981778cf
[PATCH] Update 440SP(e) cpu revisions
...
Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-13 08:01:03 +01:00
77ddc5b9af
[PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
...
Now the board revision and the current PCI bus speed are printed after
the board message.
Also the EBC initialising is now done via defines in the board config
file.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-13 07:59:56 +01:00
36adff362c
[PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
...
Now the board revision and the current PCI bus speed are printed after
the board message.
Also the EBC initialising is now done via defines in the board config
file.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-13 07:59:19 +01:00
e0b9ea8c8a
[PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
...
Now the board revision and the current PCI bus speed are printed after
the board message.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-13 07:57:51 +01:00
ca43ba18e9
Added support for the SOLIDCARD III board from Eurodesign
...
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-01-11 15:44:44 +01:00
6abaee4262
Adjusted default environment for cam5200 board.
2007-01-10 16:51:05 +01:00
0350e79d2a
Merge with /home/m8/git/u-boot/
2007-01-10 16:36:51 +01:00
bab5a90d4c
Update CHANGELOG
2007-01-10 15:35:52 +01:00
2e61581435
Merge with /home/mk/11-cmb1920/u-boot#4upstream
2007-01-10 15:34:43 +01:00
787fa15860
Fix auto_update for MCC200 board.
...
The invocation of do_auto_update() is moved to the end of the
misc_init_r() function, after the flash mappings have been
initialized. Please find attached a patch that implements that
change.
Also correct the decoding of the keypad status. With this update, the
key that will trigger the update is Column 2, Row 2.
2007-01-10 01:28:39 +01:00
d9384de2f5
CAM5200 flash driver modifications:
...
- use CFI driver (replaces custom flash driver) for main 'cam5200' target
- add second build target 'cam5200_niosflash' which still uses custom driver
2007-01-10 00:26:15 +01:00
67fea022fa
SPC1920: cleanup memory contoller setup
2007-01-09 16:02:48 +01:00
8fc2102faa
Fix the cpu speed setup to work with all boards.
2007-01-09 14:57:14 +01:00
9295acb774
SPC1920: add support for the FM18L08 Ramtron FRAM
2007-01-09 14:57:13 +01:00
38ccd2fdf3
SPC1920: update the HPI register addresses to work with the second
...
generation of hardware
2007-01-09 14:57:13 +01:00
5921e5313f
Miscellanious spc1920 related cleanups
2007-01-09 14:57:13 +01:00
e4c2d37adc
SPC1920 GO/NOGO led should be set to color red in U-Boot
2007-01-09 14:57:12 +01:00
0be62728aa
Add support for the DS3231 RTC
2007-01-09 14:57:12 +01:00
8139567b60
SMC1 uses external CLK4 instead of BRG on spc1920
2007-01-09 14:57:11 +01:00
Wolfgang Denk