phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Add default switch settings.

This commit is contained in:
wdenk 2003-05-12 09:51:00 +00:00
parent e600962991
commit d6815435c0
1 changed files with 26 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
doc/README.Purple
View File

@ -11,6 +11,20 @@ Installation Instructions:
| X|
------
Put the s3 switch into the following position:
1 0
------
|x |
|x |
|x |
|x |
|x |
| x|
| x|
|x |
------
2. Connect to the serial console and to the BDI. Power on. On the
serial line, you should see:
@ -34,8 +48,17 @@ Installation Instructions:
prog 0xB0000000 <u-boot.bin> bin
6. Power off. Restore the original S2 switch position. Power on.
U-Boot should come up.
6. Power off. Restore the original S2 switch position:
1 0
------
| x|
| x|
|x |
| X|
------
Power on. U-Boot should come up.
@ -48,5 +71,5 @@ can't really check whether 'erase' is complete by polling flash as it
is usually done. Instead, the flash driver simply waits for a given
time and assumes that erase then has passed. This behaviour is
identical to what the VxWorks driver does; also, the same timeout (6
seconds) was chosen. Note that this timeout applies for each errase
seconds) was chosen. Note that this timeout applies for each erase
operation, i. e. per erased sector.