Add initial support for Freescale mx51evk board
The patch adds initial support for the Freescale mx51evk board. Network (FEC) and SD controller (fsl_esdhc) are supported. Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fred Fan <fanyefeng@gmail.com>
This commit is contained in:
parent
c67bee1460
commit
c5fb70c911
|
@ -150,6 +150,10 @@ Dave Ellis <DGE@sixnetio.com>
|
||||||
|
|
||||||
SXNI855T MPC8xx
|
SXNI855T MPC8xx
|
||||||
|
|
||||||
|
Fred Fan <fanyefeng@gmail.com>
|
||||||
|
|
||||||
|
mx51evk i.MX51
|
||||||
|
|
||||||
Thomas Frieden <ThomasF@hyperion-entertainment.com>
|
Thomas Frieden <ThomasF@hyperion-entertainment.com>
|
||||||
|
|
||||||
AmigaOneG3SE MPC7xx
|
AmigaOneG3SE MPC7xx
|
||||||
|
|
1
MAKEALL
1
MAKEALL
|
@ -633,6 +633,7 @@ LIST_ARM11=" \
|
||||||
#########################################################################
|
#########################################################################
|
||||||
LIST_ARM_CORTEX_A8=" \
|
LIST_ARM_CORTEX_A8=" \
|
||||||
devkit8000 \
|
devkit8000 \
|
||||||
|
mx51evk \
|
||||||
omap3_beagle \
|
omap3_beagle \
|
||||||
omap3_overo \
|
omap3_overo \
|
||||||
omap3_evm \
|
omap3_evm \
|
||||||
|
|
4
Makefile
4
Makefile
|
@ -3300,6 +3300,9 @@ mx31pdk_nand_config : unconfig
|
||||||
fi
|
fi
|
||||||
@$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
|
@$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
|
||||||
|
|
||||||
|
mx51evk_config : unconfig
|
||||||
|
@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51
|
||||||
|
|
||||||
omap2420h4_config : unconfig
|
omap2420h4_config : unconfig
|
||||||
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
|
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
|
||||||
|
|
||||||
|
@ -3771,6 +3774,7 @@ clobber: clean
|
||||||
$(obj)cscope.* $(obj)*.*~
|
$(obj)cscope.* $(obj)*.*~
|
||||||
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
|
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
|
||||||
@rm -f $(obj)u-boot.kwb
|
@rm -f $(obj)u-boot.kwb
|
||||||
|
@rm -f $(obj)u-boot.imx
|
||||||
@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
|
@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
|
||||||
@rm -f $(obj)cpu/mpc824x/bedbug_603e.c
|
@rm -f $(obj)cpu/mpc824x/bedbug_603e.c
|
||||||
@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
|
@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
|
||||||
|
|
|
@ -0,0 +1,48 @@
|
||||||
|
#
|
||||||
|
# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
|
||||||
|
#
|
||||||
|
# (C) Copyright 2009 Freescale Semiconductor, Inc.
|
||||||
|
#
|
||||||
|
# This program is free software; you can redistribute it and/or
|
||||||
|
# modify it under the terms of the GNU General Public License as
|
||||||
|
# published by the Free Software Foundation; either version 2 of
|
||||||
|
# the License, or (at your option) any later version.
|
||||||
|
#
|
||||||
|
# This program is distributed in the hope that it will be useful,
|
||||||
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
# GNU General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU General Public License
|
||||||
|
# along with this program; if not, write to the Free Software
|
||||||
|
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
# MA 02111-1307 USA
|
||||||
|
#
|
||||||
|
|
||||||
|
include $(TOPDIR)/config.mk
|
||||||
|
|
||||||
|
LIB = $(obj)lib$(BOARD).a
|
||||||
|
|
||||||
|
COBJS := mx51evk.o
|
||||||
|
|
||||||
|
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||||
|
OBJS := $(addprefix $(obj),$(COBJS))
|
||||||
|
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||||
|
|
||||||
|
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
||||||
|
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
|
||||||
|
|
||||||
|
clean:
|
||||||
|
rm -f $(SOBJS) $(OBJS)
|
||||||
|
|
||||||
|
distclean: clean
|
||||||
|
rm -f $(LIB) core *.bak .depend
|
||||||
|
|
||||||
|
#########################################################################
|
||||||
|
|
||||||
|
# defines $(obj).depend target
|
||||||
|
include $(SRCTREE)/rules.mk
|
||||||
|
|
||||||
|
sinclude $(obj).depend
|
||||||
|
|
||||||
|
#########################################################################
|
|
@ -0,0 +1,25 @@
|
||||||
|
#
|
||||||
|
# Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
|
||||||
|
#
|
||||||
|
# See file CREDITS for list of people who contributed to this
|
||||||
|
# project.
|
||||||
|
#
|
||||||
|
# This program is free software; you can redistribute it and/or
|
||||||
|
# modify it under the terms of the GNU General Public License as
|
||||||
|
# published by the Free Software Foundation; either version 2 of
|
||||||
|
# the License, or (at your option) any later version.
|
||||||
|
#
|
||||||
|
# This program is distributed in the hope that it will be useful,
|
||||||
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
# GNU General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU General Public License
|
||||||
|
# along with this program; if not, write to the Free Software
|
||||||
|
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
# MA 02111-1307 USA
|
||||||
|
#
|
||||||
|
|
||||||
|
LDSCRIPT = cpu/$(CPU)/$(SOC)/u-boot.lds
|
||||||
|
TEXT_BASE = 0x97800000
|
||||||
|
IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage.cfg
|
|
@ -0,0 +1,119 @@
|
||||||
|
#
|
||||||
|
# (C Copyright 2009
|
||||||
|
# Stefano Babic DENX Software Engineering sbabic@denx.de.
|
||||||
|
#
|
||||||
|
# See file CREDITS for list of people who contributed to this
|
||||||
|
# project.
|
||||||
|
#
|
||||||
|
# This program is free software; you can redistribute it and/or
|
||||||
|
# modify it under the terms of the GNU General Public License as
|
||||||
|
# published by the Free Software Foundation; either version 2 of
|
||||||
|
# the License or (at your option) any later version.
|
||||||
|
#
|
||||||
|
# This program is distributed in the hope that it will be useful,
|
||||||
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
# GNU General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU General Public License
|
||||||
|
# along with this program; if not write to the Free Software
|
||||||
|
# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
|
||||||
|
# MA 02110-1301 USA
|
||||||
|
#
|
||||||
|
# Refer docs/README.imxmage for more details about how-to configure
|
||||||
|
# and create imximage boot image
|
||||||
|
#
|
||||||
|
# The syntax is taken as close as possible with the kwbimage
|
||||||
|
|
||||||
|
# Boot Device : one of
|
||||||
|
# spi_flash, nand, onenand, sd_card
|
||||||
|
|
||||||
|
BOOT_FROM spi
|
||||||
|
|
||||||
|
# Device Configuration Data (DCD)
|
||||||
|
#
|
||||||
|
# Each entry must have the format:
|
||||||
|
# Addr-type Address Value
|
||||||
|
#
|
||||||
|
# where:
|
||||||
|
# Addr-type register length (1,2 or 4 bytes)
|
||||||
|
# Address absolute address of the register
|
||||||
|
# value value to be stored in the register
|
||||||
|
|
||||||
|
# Setting IOMUXC
|
||||||
|
DATA 4 0x73FA88a0 0x200
|
||||||
|
DATA 4 0x73FA850c 0x20c5
|
||||||
|
DATA 4 0x73FA8510 0x20c5
|
||||||
|
DATA 4 0x73FA883c 0x2
|
||||||
|
DATA 4 0x73FA8848 0x2
|
||||||
|
DATA 4 0x73FA84b8 0xe7
|
||||||
|
DATA 4 0x73FA84bc 0x45
|
||||||
|
DATA 4 0x73FA84c0 0x45
|
||||||
|
DATA 4 0x73FA84c4 0x45
|
||||||
|
DATA 4 0x73FA84c8 0x45
|
||||||
|
DATA 4 0x73FA8820 0x0
|
||||||
|
DATA 4 0x73FA84a4 0x3
|
||||||
|
DATA 4 0x73FA84a8 0x3
|
||||||
|
DATA 4 0x73FA84ac 0xe3
|
||||||
|
DATA 4 0x73FA84b0 0xe3
|
||||||
|
DATA 4 0x73FA84b4 0xe3
|
||||||
|
DATA 4 0x73FA84cc 0xe3
|
||||||
|
DATA 4 0x73FA84d0 0xe2
|
||||||
|
|
||||||
|
DATA 4 0x73FA882c 0x6
|
||||||
|
DATA 4 0x73FA88a4 0x6
|
||||||
|
DATA 4 0x73FA88ac 0x6
|
||||||
|
DATA 4 0x73FA88b8 0x6
|
||||||
|
|
||||||
|
# Setting DDR for micron
|
||||||
|
# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
|
||||||
|
# CAS=3 BL=4
|
||||||
|
# ESDCTL_ESDCTL0
|
||||||
|
DATA 4 0x83FD9000 0x82a20000
|
||||||
|
# ESDCTL_ESDCTL1
|
||||||
|
DATA 4 0x83FD9008 0x82a20000
|
||||||
|
# ESDCTL_ESDMISC
|
||||||
|
DATA 4 0x83FD9010 0x000ad0d0
|
||||||
|
# ESDCTL_ESDCFG0
|
||||||
|
DATA 4 0x83FD9004 0x333574aa
|
||||||
|
# ESDCTL_ESDCFG1
|
||||||
|
DATA 4 0x83FD900C 0x333574aa
|
||||||
|
|
||||||
|
# Init DRAM on CS0
|
||||||
|
# ESDCTL_ESDSCR
|
||||||
|
DATA 4 0x83FD9014 0x04008008
|
||||||
|
DATA 4 0x83FD9014 0x0000801a
|
||||||
|
DATA 4 0x83FD9014 0x0000801b
|
||||||
|
DATA 4 0x83FD9014 0x00448019
|
||||||
|
DATA 4 0x83FD9014 0x07328018
|
||||||
|
DATA 4 0x83FD9014 0x04008008
|
||||||
|
DATA 4 0x83FD9014 0x00008010
|
||||||
|
DATA 4 0x83FD9014 0x00008010
|
||||||
|
DATA 4 0x83FD9014 0x06328018
|
||||||
|
DATA 4 0x83FD9014 0x03808019
|
||||||
|
DATA 4 0x83FD9014 0x00408019
|
||||||
|
DATA 4 0x83FD9014 0x00008000
|
||||||
|
|
||||||
|
# Init DRAM on CS1
|
||||||
|
DATA 4 0x83FD9014 0x0400800c
|
||||||
|
DATA 4 0x83FD9014 0x0000801e
|
||||||
|
DATA 4 0x83FD9014 0x0000801f
|
||||||
|
DATA 4 0x83FD9014 0x0000801d
|
||||||
|
DATA 4 0x83FD9014 0x0732801c
|
||||||
|
DATA 4 0x83FD9014 0x0400800c
|
||||||
|
DATA 4 0x83FD9014 0x00008014
|
||||||
|
DATA 4 0x83FD9014 0x00008014
|
||||||
|
DATA 4 0x83FD9014 0x0632801c
|
||||||
|
DATA 4 0x83FD9014 0x0380801d
|
||||||
|
DATA 4 0x83FD9014 0x0040801d
|
||||||
|
DATA 4 0x83FD9014 0x00008004
|
||||||
|
|
||||||
|
# Write to CTL0
|
||||||
|
DATA 4 0x83FD9000 0xb2a20000
|
||||||
|
# Write to CTL1
|
||||||
|
DATA 4 0x83FD9008 0xb2a20000
|
||||||
|
# ESDMISC
|
||||||
|
DATA 4 0x83FD9010 0x000ad6d0
|
||||||
|
#ESDCTL_ESDCDLYGD
|
||||||
|
DATA 4 0x83FD9034 0x90000000
|
||||||
|
DATA 4 0x83FD9014 0x00000000
|
|
@ -0,0 +1,406 @@
|
||||||
|
/*
|
||||||
|
* (C) Copyright 2009 Freescale Semiconductor, Inc.
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <common.h>
|
||||||
|
#include <asm/io.h>
|
||||||
|
#include <asm/arch/imx-regs.h>
|
||||||
|
#include <asm/arch/mx51_pins.h>
|
||||||
|
#include <asm/arch/iomux.h>
|
||||||
|
#include <asm/errno.h>
|
||||||
|
#include <i2c.h>
|
||||||
|
#include <mmc.h>
|
||||||
|
#include <fsl_esdhc.h>
|
||||||
|
#include "mx51evk.h"
|
||||||
|
|
||||||
|
DECLARE_GLOBAL_DATA_PTR;
|
||||||
|
|
||||||
|
static u32 system_rev;
|
||||||
|
struct io_board_ctrl *mx51_io_board;
|
||||||
|
|
||||||
|
#ifdef CONFIG_FSL_ESDHC
|
||||||
|
struct fsl_esdhc_cfg esdhc_cfg[2] = {
|
||||||
|
{MMC_SDHC1_BASE_ADDR, 1, 1},
|
||||||
|
{MMC_SDHC2_BASE_ADDR, 1, 1},
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
u32 get_board_rev(void)
|
||||||
|
{
|
||||||
|
return system_rev;
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void set_board_rev(int rev)
|
||||||
|
{
|
||||||
|
system_rev |= (rev & 0xF) << 8;
|
||||||
|
}
|
||||||
|
|
||||||
|
inline int is_soc_rev(int rev)
|
||||||
|
{
|
||||||
|
return (system_rev & 0xFF) - rev;
|
||||||
|
}
|
||||||
|
|
||||||
|
int dram_init(void)
|
||||||
|
{
|
||||||
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
||||||
|
gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
|
||||||
|
PHYS_SDRAM_1_SIZE);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void setup_iomux_uart(void)
|
||||||
|
{
|
||||||
|
unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
|
||||||
|
PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH;
|
||||||
|
|
||||||
|
mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST);
|
||||||
|
mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST);
|
||||||
|
mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad);
|
||||||
|
mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void setup_expio(void)
|
||||||
|
{
|
||||||
|
u32 reg;
|
||||||
|
struct weim *pweim = (struct weim *)WEIM_BASE_ADDR;
|
||||||
|
struct clkctl *pclkctl = (struct clkctl *)CCM_BASE_ADDR;
|
||||||
|
|
||||||
|
/* CS5 setup */
|
||||||
|
mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT0);
|
||||||
|
writel(0x00410089, &pweim[5].csgcr1);
|
||||||
|
writel(0x00000002, &pweim[5].csgcr2);
|
||||||
|
|
||||||
|
/* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */
|
||||||
|
writel(0x32260000, &pweim[5].csrcr1);
|
||||||
|
|
||||||
|
/* APR = 0 */
|
||||||
|
writel(0x00000000, &pweim[5].csrcr2);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0, WEN=0,
|
||||||
|
* WCSA=0, WCSN=0
|
||||||
|
*/
|
||||||
|
writel(0x72080F00, &pweim[5].cswcr1);
|
||||||
|
|
||||||
|
mx51_io_board = (struct io_board_ctrl *)(CS5_BASE_ADDR +
|
||||||
|
IO_BOARD_OFFSET);
|
||||||
|
if ((readw(&mx51_io_board->id1) == 0xAAAA) &&
|
||||||
|
(readw(&mx51_io_board->id2) == 0x5555)) {
|
||||||
|
if (is_soc_rev(CHIP_REV_2_0) < 0) {
|
||||||
|
reg = readl(&pclkctl->cbcdr);
|
||||||
|
reg = (reg & (~0x70000)) | 0x30000;
|
||||||
|
writel(reg, &pclkctl->cbcdr);
|
||||||
|
/* make sure divider effective */
|
||||||
|
while (readl(&pclkctl->cdhipr) != 0)
|
||||||
|
;
|
||||||
|
writel(0x0, &pclkctl->ccdr);
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
/* CS1 */
|
||||||
|
writel(0x00410089, &pweim[1].csgcr1);
|
||||||
|
writel(0x00000002, &pweim[1].csgcr2);
|
||||||
|
/* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */
|
||||||
|
writel(0x32260000, &pweim[1].csrcr1);
|
||||||
|
/* APR=0 */
|
||||||
|
writel(0x00000000, &pweim[1].csrcr2);
|
||||||
|
/*
|
||||||
|
* WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0,
|
||||||
|
* WEN=0, WCSA=0, WCSN=0
|
||||||
|
*/
|
||||||
|
writel(0x72080F00, &pweim[1].cswcr1);
|
||||||
|
mx51_io_board = (struct io_board_ctrl *)(CS1_BASE_ADDR +
|
||||||
|
IO_BOARD_OFFSET);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Reset interrupt status reg */
|
||||||
|
writew(0x1F, &(mx51_io_board->int_rest));
|
||||||
|
writew(0x00, &(mx51_io_board->int_rest));
|
||||||
|
writew(0xFFFF, &(mx51_io_board->int_mask));
|
||||||
|
|
||||||
|
/* Reset the XUART and Ethernet controllers */
|
||||||
|
reg = readw(&(mx51_io_board->sw_reset));
|
||||||
|
reg |= 0x9;
|
||||||
|
writew(reg, &(mx51_io_board->sw_reset));
|
||||||
|
reg &= ~0x9;
|
||||||
|
writew(reg, &(mx51_io_board->sw_reset));
|
||||||
|
}
|
||||||
|
|
||||||
|
static void setup_iomux_fec(void)
|
||||||
|
{
|
||||||
|
/*FEC_MDIO*/
|
||||||
|
mxc_request_iomux(MX51_PIN_EIM_EB2 , IOMUX_CONFIG_ALT3);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_EIM_EB2 , 0x1FD);
|
||||||
|
|
||||||
|
/*FEC_MDC*/
|
||||||
|
mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004);
|
||||||
|
|
||||||
|
/* FEC RDATA[3] */
|
||||||
|
mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
|
||||||
|
|
||||||
|
/* FEC RDATA[2] */
|
||||||
|
mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
|
||||||
|
|
||||||
|
/* FEC RDATA[1] */
|
||||||
|
mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
|
||||||
|
|
||||||
|
/* FEC RDATA[0] */
|
||||||
|
mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
|
||||||
|
|
||||||
|
/* FEC TDATA[3] */
|
||||||
|
mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004);
|
||||||
|
|
||||||
|
/* FEC TDATA[2] */
|
||||||
|
mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004);
|
||||||
|
|
||||||
|
/* FEC TDATA[1] */
|
||||||
|
mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004);
|
||||||
|
|
||||||
|
/* FEC TDATA[0] */
|
||||||
|
mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004);
|
||||||
|
|
||||||
|
/* FEC TX_EN */
|
||||||
|
mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004);
|
||||||
|
|
||||||
|
/* FEC TX_ER */
|
||||||
|
mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004);
|
||||||
|
|
||||||
|
/* FEC TX_CLK */
|
||||||
|
mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180);
|
||||||
|
|
||||||
|
/* FEC TX_COL */
|
||||||
|
mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
|
||||||
|
|
||||||
|
/* FEC RX_CLK */
|
||||||
|
mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
|
||||||
|
|
||||||
|
/* FEC RX_CRS */
|
||||||
|
mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180);
|
||||||
|
|
||||||
|
/* FEC RX_ER */
|
||||||
|
mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
|
||||||
|
|
||||||
|
/* FEC RX_DV */
|
||||||
|
mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef CONFIG_FSL_ESDHC
|
||||||
|
int board_mmc_getcd(u8 *cd, struct mmc *mmc)
|
||||||
|
{
|
||||||
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
||||||
|
|
||||||
|
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
|
||||||
|
*cd = readl(GPIO1_BASE_ADDR) & 0x01;
|
||||||
|
else
|
||||||
|
*cd = readl(GPIO1_BASE_ADDR) & 0x40;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int board_mmc_init(bd_t *bis)
|
||||||
|
{
|
||||||
|
u32 index;
|
||||||
|
s32 status = 0;
|
||||||
|
|
||||||
|
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM;
|
||||||
|
index++) {
|
||||||
|
switch (index) {
|
||||||
|
case 0:
|
||||||
|
mxc_request_iomux(MX51_PIN_SD1_CMD,
|
||||||
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
||||||
|
mxc_request_iomux(MX51_PIN_SD1_CLK,
|
||||||
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
||||||
|
mxc_request_iomux(MX51_PIN_SD1_DATA0,
|
||||||
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
||||||
|
mxc_request_iomux(MX51_PIN_SD1_DATA1,
|
||||||
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
||||||
|
mxc_request_iomux(MX51_PIN_SD1_DATA2,
|
||||||
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
||||||
|
mxc_request_iomux(MX51_PIN_SD1_DATA3,
|
||||||
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
|
||||||
|
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
|
||||||
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
|
||||||
|
PAD_CTL_PUE_PULL |
|
||||||
|
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
|
||||||
|
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
|
||||||
|
PAD_CTL_HYS_NONE | PAD_CTL_47K_PU |
|
||||||
|
PAD_CTL_PUE_PULL |
|
||||||
|
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
|
||||||
|
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
|
||||||
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
|
||||||
|
PAD_CTL_PUE_PULL |
|
||||||
|
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
|
||||||
|
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
|
||||||
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
|
||||||
|
PAD_CTL_PUE_PULL |
|
||||||
|
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
|
||||||
|
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
|
||||||
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
|
||||||
|
PAD_CTL_PUE_PULL |
|
||||||
|
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
|
||||||
|
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
|
||||||
|
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD |
|
||||||
|
PAD_CTL_PUE_PULL |
|
||||||
|
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
|
||||||
|
mxc_request_iomux(MX51_PIN_GPIO1_0,
|
||||||
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
|
||||||
|
PAD_CTL_HYS_ENABLE);
|
||||||
|
mxc_request_iomux(MX51_PIN_GPIO1_1,
|
||||||
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
|
||||||
|
PAD_CTL_HYS_ENABLE);
|
||||||
|
break;
|
||||||
|
case 1:
|
||||||
|
mxc_request_iomux(MX51_PIN_SD2_CMD,
|
||||||
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
||||||
|
mxc_request_iomux(MX51_PIN_SD2_CLK,
|
||||||
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
||||||
|
mxc_request_iomux(MX51_PIN_SD2_DATA0,
|
||||||
|
IOMUX_CONFIG_ALT0);
|
||||||
|
mxc_request_iomux(MX51_PIN_SD2_DATA1,
|
||||||
|
IOMUX_CONFIG_ALT0);
|
||||||
|
mxc_request_iomux(MX51_PIN_SD2_DATA2,
|
||||||
|
IOMUX_CONFIG_ALT0);
|
||||||
|
mxc_request_iomux(MX51_PIN_SD2_DATA3,
|
||||||
|
IOMUX_CONFIG_ALT0);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_SD2_CMD,
|
||||||
|
PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
|
||||||
|
PAD_CTL_SRE_FAST);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_SD2_CLK,
|
||||||
|
PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
|
||||||
|
PAD_CTL_SRE_FAST);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_SD2_DATA0,
|
||||||
|
PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
|
||||||
|
PAD_CTL_SRE_FAST);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_SD2_DATA1,
|
||||||
|
PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
|
||||||
|
PAD_CTL_SRE_FAST);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_SD2_DATA2,
|
||||||
|
PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
|
||||||
|
PAD_CTL_SRE_FAST);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_SD2_DATA3,
|
||||||
|
PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
|
||||||
|
PAD_CTL_SRE_FAST);
|
||||||
|
mxc_request_iomux(MX51_PIN_SD2_CMD,
|
||||||
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
||||||
|
mxc_request_iomux(MX51_PIN_GPIO1_6,
|
||||||
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_GPIO1_6,
|
||||||
|
PAD_CTL_HYS_ENABLE);
|
||||||
|
mxc_request_iomux(MX51_PIN_GPIO1_5,
|
||||||
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
||||||
|
mxc_iomux_set_pad(MX51_PIN_GPIO1_5,
|
||||||
|
PAD_CTL_HYS_ENABLE);
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
printf("Warning: you configured more ESDHC controller"
|
||||||
|
"(%d) as supported by the board(2)\n",
|
||||||
|
CONFIG_SYS_FSL_ESDHC_NUM);
|
||||||
|
return status;
|
||||||
|
}
|
||||||
|
status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
|
||||||
|
}
|
||||||
|
return status;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
int board_init(void)
|
||||||
|
{
|
||||||
|
system_rev = get_cpu_rev();
|
||||||
|
|
||||||
|
gd->bd->bi_arch_number = MACH_TYPE_MX51_BABBAGE;
|
||||||
|
/* address of boot parameters */
|
||||||
|
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
|
||||||
|
|
||||||
|
setup_iomux_uart();
|
||||||
|
setup_expio();
|
||||||
|
setup_iomux_fec();
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int checkboard(void)
|
||||||
|
{
|
||||||
|
puts("Board: MX51EVK ");
|
||||||
|
|
||||||
|
switch (system_rev & 0xff) {
|
||||||
|
case CHIP_REV_3_0:
|
||||||
|
puts("3.0 [");
|
||||||
|
break;
|
||||||
|
case CHIP_REV_2_5:
|
||||||
|
puts("2.5 [");
|
||||||
|
break;
|
||||||
|
case CHIP_REV_2_0:
|
||||||
|
puts("2.0 [");
|
||||||
|
break;
|
||||||
|
case CHIP_REV_1_1:
|
||||||
|
puts("1.1 [");
|
||||||
|
break;
|
||||||
|
case CHIP_REV_1_0:
|
||||||
|
default:
|
||||||
|
puts("1.0 [");
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
switch (__raw_readl(SRC_BASE_ADDR + 0x8)) {
|
||||||
|
case 0x0001:
|
||||||
|
puts("POR");
|
||||||
|
break;
|
||||||
|
case 0x0009:
|
||||||
|
puts("RST");
|
||||||
|
break;
|
||||||
|
case 0x0010:
|
||||||
|
case 0x0011:
|
||||||
|
puts("WDOG");
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
puts("unknown");
|
||||||
|
}
|
||||||
|
puts("]\n");
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
|
@ -0,0 +1,51 @@
|
||||||
|
/*
|
||||||
|
* (C) Copyright 2009 Freescale Semiconductor, Inc.
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __BOARD_FREESCALE_MX51_EVK_H__
|
||||||
|
#define __BOARD_FREESCALE_MX51_EVK_H__
|
||||||
|
|
||||||
|
#ifndef __ASSEMBLY__
|
||||||
|
struct io_board_ctrl {
|
||||||
|
u16 led_ctrl; /* 0x00 */
|
||||||
|
u16 resv1[0x03];
|
||||||
|
u16 sb_stat; /* 0x08 */
|
||||||
|
u16 resv2[0x03];
|
||||||
|
u16 int_stat; /* 0x10 */
|
||||||
|
u16 resv3[0x07];
|
||||||
|
u16 int_rest; /* 0x20 */
|
||||||
|
u16 resv4[0x0B];
|
||||||
|
u16 int_mask; /* 0x38 */
|
||||||
|
u16 resv5[0x03];
|
||||||
|
u16 id1; /* 0x40 */
|
||||||
|
u16 resv6[0x03];
|
||||||
|
u16 id2; /* 0x48 */
|
||||||
|
u16 resv7[0x03];
|
||||||
|
u16 version; /* 0x50 */
|
||||||
|
u16 resv8[0x03];
|
||||||
|
u16 id3; /* 0x58 */
|
||||||
|
u16 resv9[0x03];
|
||||||
|
u16 sw_reset; /* 0x60 */
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define IO_BOARD_OFFSET (0x20000)
|
||||||
|
#endif
|
|
@ -0,0 +1,172 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
|
||||||
|
*
|
||||||
|
* (C) Copyright 2009 Freescale Semiconductor, Inc.
|
||||||
|
*
|
||||||
|
* Configuration settings for the MX51EVK Board
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __CONFIG_H
|
||||||
|
#define __CONFIG_H
|
||||||
|
|
||||||
|
|
||||||
|
/* High Level Configuration Options */
|
||||||
|
|
||||||
|
#define CONFIG_MX51 /* in a mx51 */
|
||||||
|
#define CONFIG_SKIP_RELOCATE_UBOOT
|
||||||
|
|
||||||
|
#define CONFIG_MX51_HCLK_FREQ 24000000 /* RedBoot says 26MHz */
|
||||||
|
#define CONFIG_MX51_CLK32 32768
|
||||||
|
#define CONFIG_DISPLAY_CPUINFO
|
||||||
|
#define CONFIG_DISPLAY_BOARDINFO
|
||||||
|
|
||||||
|
#define CONFIG_L2_OFF
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Disabled for now due to build problems under Debian and a significant
|
||||||
|
* increase in the final file size: 144260 vs. 109536 Bytes.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
||||||
|
#define CONFIG_REVISION_TAG 1
|
||||||
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
||||||
|
#define CONFIG_INITRD_TAG 1
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Size of malloc() pool
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
|
||||||
|
/* size in bytes reserved for initial data */
|
||||||
|
#define CONFIG_SYS_GBL_DATA_SIZE 128
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Hardware drivers
|
||||||
|
*/
|
||||||
|
#define CONFIG_MXC_UART
|
||||||
|
#define CONFIG_SYS_MX51_UART1
|
||||||
|
|
||||||
|
/*
|
||||||
|
* MMC Configs
|
||||||
|
* */
|
||||||
|
#define CONFIG_FSL_ESDHC
|
||||||
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
||||||
|
#define CONFIG_SYS_FSL_ESDHC_NUM 2
|
||||||
|
|
||||||
|
#define CONFIG_MMC
|
||||||
|
|
||||||
|
#define CONFIG_CMD_MMC
|
||||||
|
#define CONFIG_GENERIC_MMC
|
||||||
|
#define CONFIG_CMD_FAT
|
||||||
|
#define CONFIG_DOS_PARTITION
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Eth Configs
|
||||||
|
*/
|
||||||
|
#define CONFIG_HAS_ETH1
|
||||||
|
#define CONFIG_NET_MULTI
|
||||||
|
#define CONFIG_MII
|
||||||
|
#define CONFIG_DISCOVER_PHY
|
||||||
|
|
||||||
|
#define CONFIG_FEC_MXC
|
||||||
|
#define IMX_FEC_BASE FEC_BASE_ADDR
|
||||||
|
#define CONFIG_FEC_MXC_PHYADDR 0x1F
|
||||||
|
|
||||||
|
#define CONFIG_CMD_PING
|
||||||
|
#define CONFIG_CMD_DHCP
|
||||||
|
#define CONFIG_CMD_MII
|
||||||
|
#define CONFIG_CMD_NET
|
||||||
|
|
||||||
|
/* allow to overwrite serial and ethaddr */
|
||||||
|
#define CONFIG_ENV_OVERWRITE
|
||||||
|
#define CONFIG_CONS_INDEX 1
|
||||||
|
#define CONFIG_BAUDRATE 115200
|
||||||
|
#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
|
||||||
|
|
||||||
|
/***********************************************************
|
||||||
|
* Command definition
|
||||||
|
***********************************************************/
|
||||||
|
|
||||||
|
#include <config_cmd_default.h>
|
||||||
|
|
||||||
|
#undef CONFIG_CMD_IMLS
|
||||||
|
|
||||||
|
#define CONFIG_BOOTDELAY 3
|
||||||
|
|
||||||
|
#define CONFIG_PRIME "FEC0"
|
||||||
|
|
||||||
|
#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */
|
||||||
|
|
||||||
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||||
|
"netdev=eth0\0" \
|
||||||
|
"uboot_addr=0xa0000000\0" \
|
||||||
|
"uboot=u-boot.bin\0" \
|
||||||
|
"loadaddr=0x90800000\0" \
|
||||||
|
"bootargs_base=setenv bootargs console=tty "\
|
||||||
|
"console=ttymxc0,${baudrate}\0"\
|
||||||
|
"bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\
|
||||||
|
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\
|
||||||
|
"bootcmd=run bootcmd_net\0" \
|
||||||
|
"bootcmd_net=run bootargs_base bootargs_nfs; " \
|
||||||
|
"tftpboot ${loadaddr} ${kernel}; bootm\0"
|
||||||
|
|
||||||
|
#define CONFIG_ARP_TIMEOUT 200UL
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Miscellaneous configurable options
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||||
|
#define CONFIG_SYS_PROMPT "MX51EVK U-Boot > "
|
||||||
|
#define CONFIG_AUTO_COMPLETE
|
||||||
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||||
|
/* Print Buffer Size */
|
||||||
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||||
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||||
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||||
|
|
||||||
|
#define CONFIG_SYS_MEMTEST_START 0x90000000
|
||||||
|
#define CONFIG_SYS_MEMTEST_END 0x10000
|
||||||
|
|
||||||
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||||
|
|
||||||
|
#define CONFIG_SYS_HZ 1000
|
||||||
|
#define CONFIG_CMDLINE_EDITING
|
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* Stack sizes
|
||||||
|
*
|
||||||
|
* The stack sizes are set up in start.S using the settings below
|
||||||
|
*/
|
||||||
|
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
|
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* Physical Memory Map
|
||||||
|
*/
|
||||||
|
#define CONFIG_NR_DRAM_BANKS 1
|
||||||
|
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
|
||||||
|
#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024)
|
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* FLASH and environment organization
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_NO_FLASH
|
||||||
|
|
||||||
|
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
|
||||||
|
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
|
||||||
|
#define CONFIG_ENV_IS_NOWHERE
|
||||||
|
|
||||||
|
#endif
|
Loading…
Reference in New Issue