Add board support for armadillo HT1070
Patch by Rowel Atienza, 06 Apr 2005
This commit is contained in:
parent
c2d0ab4da8
commit
c570b2fdf5
|
@ -2,6 +2,9 @@
|
||||||
Changes for U-Boot 1.1.4:
|
Changes for U-Boot 1.1.4:
|
||||||
======================================================================
|
======================================================================
|
||||||
|
|
||||||
|
* Add board support for armadillo HT1070
|
||||||
|
Patch by Rowel Atienza, 06 Apr 2005
|
||||||
|
|
||||||
* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
|
* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
|
||||||
Patch by Vitaly Bordug, 30 Mar 2005
|
Patch by Vitaly Bordug, 30 Mar 2005
|
||||||
|
|
||||||
|
|
|
@ -351,6 +351,10 @@ Unknown / orphaned boards:
|
||||||
# Board CPU #
|
# Board CPU #
|
||||||
#########################################################################
|
#########################################################################
|
||||||
|
|
||||||
|
Rowel Atienza <rowel@diwalabs.com>
|
||||||
|
|
||||||
|
armadillo ARM720T
|
||||||
|
|
||||||
Rishi Bhattacharya <rishi@ti.com>
|
Rishi Bhattacharya <rishi@ti.com>
|
||||||
|
|
||||||
omap5912osk ARM926EJS
|
omap5912osk ARM926EJS
|
||||||
|
|
4
MAKEALL
4
MAKEALL
|
@ -161,8 +161,8 @@ LIST_SA="assabet dnp1110 gcplus lart shannon"
|
||||||
#########################################################################
|
#########################################################################
|
||||||
|
|
||||||
LIST_ARM7=" \
|
LIST_ARM7=" \
|
||||||
B2 ep7312 evb4510 impa7 \
|
armadillo B2 ep7312 evb4510 \
|
||||||
integratorap_CM720T integratorap_CM7TDMI \
|
impa7 integratorap_CM720T integratorap_CM7TDMI \
|
||||||
modnet50 \
|
modnet50 \
|
||||||
"
|
"
|
||||||
|
|
||||||
|
|
3
Makefile
3
Makefile
|
@ -1684,6 +1684,9 @@ B2_config : unconfig
|
||||||
## ARM720T Systems
|
## ARM720T Systems
|
||||||
#########################################################################
|
#########################################################################
|
||||||
|
|
||||||
|
armadillo_config: unconfig
|
||||||
|
@./mkconfig $(@:_config=) arm arm720t armadillo
|
||||||
|
|
||||||
ep7312_config : unconfig
|
ep7312_config : unconfig
|
||||||
@./mkconfig $(@:_config=) arm arm720t ep7312
|
@./mkconfig $(@:_config=) arm arm720t ep7312
|
||||||
|
|
||||||
|
|
14
README
14
README
|
@ -302,13 +302,13 @@ The following options need to be configured:
|
||||||
ARM based boards:
|
ARM based boards:
|
||||||
-----------------
|
-----------------
|
||||||
|
|
||||||
CONFIG_AT91RM9200DK, CONFIG_CERF250, CONFIG_DNP1110,
|
CONFIG_ARMADILLO, CONFIG_AT91RM9200DK, CONFIG_CERF250,
|
||||||
CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE,
|
CONFIG_DNP1110, CONFIG_EP7312, CONFIG_H2_OMAP1610,
|
||||||
CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
|
CONFIG_HHP_CRADLE, CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510,
|
||||||
CONFIG_LART, CONFIG_LPD7A400 CONFIG_LUBBOCK,
|
CONFIG_INNOVATOROMAP1610, CONFIG_LART, CONFIG_LPD7A400,
|
||||||
CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, CONFIG_SHANNON,
|
CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4,
|
||||||
CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410,
|
CONFIG_SHANNON, CONFIG_P2_OMAP730, CONFIG_SMDK2400,
|
||||||
CONFIG_TRAB, CONFIG_VCMA9
|
CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9
|
||||||
|
|
||||||
MicroBlaze based boards:
|
MicroBlaze based boards:
|
||||||
------------------------
|
------------------------
|
||||||
|
|
|
@ -0,0 +1,48 @@
|
||||||
|
#
|
||||||
|
# (C) Copyright 2002
|
||||||
|
# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
||||||
|
# Marius Groeger <mgroeger@sysgo.de>
|
||||||
|
#
|
||||||
|
# See file CREDITS for list of people who contributed to this
|
||||||
|
# project.
|
||||||
|
#
|
||||||
|
# This program is free software; you can redistribute it and/or
|
||||||
|
# modify it under the terms of the GNU General Public License as
|
||||||
|
# published by the Free Software Foundation; either version 2 of
|
||||||
|
# the License, or (at your option) any later version.
|
||||||
|
#
|
||||||
|
# This program is distributed in the hope that it will be useful,
|
||||||
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
# GNU General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU General Public License
|
||||||
|
# along with this program; if not, write to the Free Software
|
||||||
|
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
# MA 02111-1307 USA
|
||||||
|
#
|
||||||
|
|
||||||
|
include $(TOPDIR)/config.mk
|
||||||
|
|
||||||
|
LIB = lib$(BOARD).a
|
||||||
|
|
||||||
|
OBJS := armadillo.o flash.o
|
||||||
|
SOBJS := lowlevel_init.o
|
||||||
|
|
||||||
|
$(LIB): $(OBJS) $(SOBJS)
|
||||||
|
$(AR) crv $@ $(OBJS) $(SOBJS)
|
||||||
|
|
||||||
|
clean:
|
||||||
|
rm -f $(SOBJS) $(OBJS)
|
||||||
|
|
||||||
|
distclean: clean
|
||||||
|
rm -f $(LIB) core *.bak .depend
|
||||||
|
|
||||||
|
#########################################################################
|
||||||
|
|
||||||
|
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
|
||||||
|
$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
|
||||||
|
|
||||||
|
-include .depend
|
||||||
|
|
||||||
|
#########################################################################
|
|
@ -0,0 +1,62 @@
|
||||||
|
/*
|
||||||
|
* (C) Copyright 2002
|
||||||
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
||||||
|
* Marius Groeger <mgroeger@sysgo.de>
|
||||||
|
*
|
||||||
|
* (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
|
||||||
|
* Armadillo board HT1070
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <common.h>
|
||||||
|
#include <clps7111.h>
|
||||||
|
|
||||||
|
/* ------------------------------------------------------------------------- */
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Miscelaneous platform dependent initialisations
|
||||||
|
*/
|
||||||
|
|
||||||
|
int board_init (void)
|
||||||
|
{
|
||||||
|
DECLARE_GLOBAL_DATA_PTR;
|
||||||
|
|
||||||
|
/* Activate LED flasher */
|
||||||
|
IO_LEDFLSH = 0x40;
|
||||||
|
|
||||||
|
/* arch number MACH_TYPE_ARMADILLO - not official*/
|
||||||
|
gd->bd->bi_arch_number = 83;
|
||||||
|
|
||||||
|
/* location of boot parameters */
|
||||||
|
gd->bd->bi_boot_params = 0xc0000100;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int dram_init (void)
|
||||||
|
{
|
||||||
|
DECLARE_GLOBAL_DATA_PTR;
|
||||||
|
|
||||||
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
||||||
|
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
|
||||||
|
|
||||||
|
return (0);
|
||||||
|
}
|
|
@ -0,0 +1,29 @@
|
||||||
|
#
|
||||||
|
# (C) Copyright 2000
|
||||||
|
# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
||||||
|
# Marius Groeger <mgroeger@sysgo.de>
|
||||||
|
#
|
||||||
|
# (C) Copyright 2000
|
||||||
|
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||||
|
#
|
||||||
|
# See file CREDITS for list of people who contributed to this
|
||||||
|
# project.
|
||||||
|
#
|
||||||
|
# This program is free software; you can redistribute it and/or
|
||||||
|
# modify it under the terms of the GNU General Public License as
|
||||||
|
# published by the Free Software Foundation; either version 2 of
|
||||||
|
# the License, or (at your option) any later version.
|
||||||
|
#
|
||||||
|
# This program is distributed in the hope that it will be useful,
|
||||||
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
# GNU General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU General Public License
|
||||||
|
# along with this program; if not, write to the Free Software
|
||||||
|
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
# MA 02111-1307 USA
|
||||||
|
#
|
||||||
|
|
||||||
|
#address where u-boot will be relocated
|
||||||
|
TEXT_BASE = 0xc0f80000
|
|
@ -0,0 +1,336 @@
|
||||||
|
/*
|
||||||
|
* (C) Copyright 2002
|
||||||
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
||||||
|
* Marius Groeger <mgroeger@sysgo.de>
|
||||||
|
*
|
||||||
|
* (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
|
||||||
|
* Flash driver for armadillo board HT1070
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <common.h>
|
||||||
|
|
||||||
|
#define FLASH_BANK_SIZE 0x400000
|
||||||
|
|
||||||
|
/*value used by hermit is 0x200*/
|
||||||
|
/*document says sector size is either 64k in low mem reg and 8k in high mem reg*/
|
||||||
|
#define MAIN_SECT_SIZE 0x10000
|
||||||
|
|
||||||
|
#define UNALIGNED_MASK (3)
|
||||||
|
#define FL_WORD(addr) (*(volatile unsigned short*)(addr))
|
||||||
|
#define FLASH_TIMEOUT 20000000
|
||||||
|
|
||||||
|
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
|
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
*/
|
||||||
|
|
||||||
|
ulong flash_init (void)
|
||||||
|
{
|
||||||
|
int i, j;
|
||||||
|
ulong size = 0;
|
||||||
|
|
||||||
|
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
|
||||||
|
ulong flashbase = 0;
|
||||||
|
|
||||||
|
flash_info[i].flash_id = (FUJ_MANUFACT & FLASH_VENDMASK);
|
||||||
|
/*(INTEL_ID_28F128J3 & FLASH_TYPEMASK); */
|
||||||
|
flash_info[i].size = FLASH_BANK_SIZE;
|
||||||
|
flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
|
||||||
|
memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
|
||||||
|
if (i == 0)
|
||||||
|
flashbase = PHYS_FLASH_1;
|
||||||
|
else
|
||||||
|
panic ("configured too many flash banks!\n");
|
||||||
|
for (j = 0; j < flash_info[i].sector_count; j++) {
|
||||||
|
flash_info[i].start[j] =
|
||||||
|
flashbase + j * MAIN_SECT_SIZE;
|
||||||
|
}
|
||||||
|
size += flash_info[i].size;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Protect monitor and environment sectors
|
||||||
|
*/
|
||||||
|
flash_protect (FLAG_PROTECT_SET,
|
||||||
|
CFG_FLASH_BASE,
|
||||||
|
CFG_FLASH_BASE + monitor_flash_len - 1,
|
||||||
|
&flash_info[0]);
|
||||||
|
|
||||||
|
flash_protect (FLAG_PROTECT_SET,
|
||||||
|
CFG_ENV_ADDR,
|
||||||
|
CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
|
||||||
|
|
||||||
|
return size;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
*/
|
||||||
|
void flash_print_info (flash_info_t * info)
|
||||||
|
{
|
||||||
|
int i;
|
||||||
|
|
||||||
|
switch (info->flash_id & FLASH_VENDMASK) {
|
||||||
|
case (FUJ_MANUFACT & FLASH_VENDMASK):
|
||||||
|
printf ("Fujitsu: ");
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
printf ("Unknown Vendor ");
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
/*
|
||||||
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
||||||
|
case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
|
||||||
|
printf ("28F128J3 (128Mbit)\n");
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
printf ("Unknown Chip Type\n");
|
||||||
|
goto Done;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
*/
|
||||||
|
printf (" Size: %ld MB in %d Sectors\n",
|
||||||
|
info->size >> 20, info->sector_count);
|
||||||
|
|
||||||
|
printf (" Sector Start Addresses:");
|
||||||
|
for (i = 0; i < info->sector_count; i++) {
|
||||||
|
if ((i % 5) == 0) {
|
||||||
|
printf ("\n ");
|
||||||
|
}
|
||||||
|
printf (" %08lX%s", info->start[i],
|
||||||
|
info->protect[i] ? " (RO)" : " ");
|
||||||
|
}
|
||||||
|
printf ("\n");
|
||||||
|
|
||||||
|
Done:
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* * Loop until both write state machines complete.
|
||||||
|
* */
|
||||||
|
static unsigned short flash_status_wait (unsigned long addr,
|
||||||
|
unsigned short value)
|
||||||
|
{
|
||||||
|
unsigned short status;
|
||||||
|
long timeout = FLASH_TIMEOUT;
|
||||||
|
|
||||||
|
while (((status = (FL_WORD (addr))) != value) && timeout > 0) {
|
||||||
|
timeout--;
|
||||||
|
}
|
||||||
|
return status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Loop until the Write State machine is ready, then do a full error
|
||||||
|
* check. Clear status and leave the flash in Read Array mode; return
|
||||||
|
* 0 for no error, -1 for error.
|
||||||
|
*/
|
||||||
|
static int flash_status_full_check (unsigned long addr, unsigned short value1,
|
||||||
|
unsigned short value2)
|
||||||
|
{
|
||||||
|
unsigned short status1, status2;
|
||||||
|
|
||||||
|
status1 = flash_status_wait (addr, value1);
|
||||||
|
status2 = flash_status_wait (addr + 2, value2);
|
||||||
|
return (status1 != value1 || status2 != value2) ? -1 : 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
*/
|
||||||
|
|
||||||
|
int flash_erase (flash_info_t * info, int s_first, int s_last)
|
||||||
|
{
|
||||||
|
int flag, prot, sect;
|
||||||
|
int rc = ERR_OK;
|
||||||
|
unsigned long base;
|
||||||
|
unsigned long addr;
|
||||||
|
|
||||||
|
if ((info->flash_id & FLASH_VENDMASK) !=
|
||||||
|
(FUJ_MANUFACT & FLASH_VENDMASK)) {
|
||||||
|
return ERR_UNKNOWN_FLASH_VENDOR;
|
||||||
|
}
|
||||||
|
|
||||||
|
prot = 0;
|
||||||
|
for (sect = s_first; sect <= s_last; ++sect) {
|
||||||
|
if (info->protect[sect]) {
|
||||||
|
prot++;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (prot)
|
||||||
|
return ERR_PROTECTED;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Disable interrupts which might cause a timeout
|
||||||
|
* here. Remember that our exception vectors are
|
||||||
|
* at address 0 in the flash, and we don't want a
|
||||||
|
* (ticker) exception to happen while the flash
|
||||||
|
* chip is in programming mode.
|
||||||
|
*/
|
||||||
|
flag = disable_interrupts ();
|
||||||
|
|
||||||
|
printf ("Erasing %d sectors starting at sector %2d.\n"
|
||||||
|
"This make take some time ... ",
|
||||||
|
s_last - s_first, sect);
|
||||||
|
/* Start erase on unprotected sectors */
|
||||||
|
for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
|
||||||
|
/* ARM simple, non interrupt dependent timer */
|
||||||
|
reset_timer_masked ();
|
||||||
|
|
||||||
|
if (info->protect[sect] == 0) { /* not protected */
|
||||||
|
|
||||||
|
addr = sect * MAIN_SECT_SIZE;
|
||||||
|
addr &= ~(unsigned long) UNALIGNED_MASK; /* word align */
|
||||||
|
base = addr & 0xF0000000;
|
||||||
|
|
||||||
|
FL_WORD (base + (0x555 << 1)) = 0xAA;
|
||||||
|
FL_WORD (base + (0x2AA << 1)) = 0x55;
|
||||||
|
FL_WORD (base + (0x555 << 1)) = 0x80;
|
||||||
|
FL_WORD (base + (0x555 << 1)) = 0xAA;
|
||||||
|
FL_WORD (base + (0x2AA << 1)) = 0x55;
|
||||||
|
FL_WORD (addr) = 0x30;
|
||||||
|
if (flash_status_full_check (addr, 0xFFFF, 0xFFFF))
|
||||||
|
return ERR_PROTECTED;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
printf ("\nDone.\n");
|
||||||
|
if (ctrlc ())
|
||||||
|
printf ("User Interrupt!\n");
|
||||||
|
|
||||||
|
/* allow flash to settle - wait 10 ms */
|
||||||
|
udelay_masked (10000);
|
||||||
|
|
||||||
|
if (flag)
|
||||||
|
enable_interrupts ();
|
||||||
|
|
||||||
|
return rc;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* Copy memory to flash
|
||||||
|
*/
|
||||||
|
|
||||||
|
static int write_word (flash_info_t * info, ulong dest, ushort data)
|
||||||
|
{
|
||||||
|
int flag;
|
||||||
|
unsigned long base;
|
||||||
|
|
||||||
|
/* Check if Flash is (sufficiently) erased
|
||||||
|
*/
|
||||||
|
if ((FL_WORD (dest) & data) != data)
|
||||||
|
return ERR_NOT_ERASED;
|
||||||
|
|
||||||
|
/*if(dest & UNALIGNED_MASK) return ERR_ALIGN; */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Disable interrupts which might cause a timeout
|
||||||
|
* here. Remember that our exception vectors are
|
||||||
|
* at address 0 in the flash, and we don't want a
|
||||||
|
* (ticker) exception to happen while the flash
|
||||||
|
* chip is in programming mode.
|
||||||
|
*/
|
||||||
|
flag = disable_interrupts ();
|
||||||
|
|
||||||
|
/* arm simple, non interrupt dependent timer */
|
||||||
|
reset_timer_masked ();
|
||||||
|
|
||||||
|
base = dest & 0xF0000000;
|
||||||
|
FL_WORD (base + (0x555 << 1)) = 0xAA;
|
||||||
|
FL_WORD (base + (0x2AA << 1)) = 0x55;
|
||||||
|
FL_WORD (base + (0x555 << 1)) = 0xA0;
|
||||||
|
FL_WORD (dest) = data;
|
||||||
|
/*printf("writing 0x%p = 0x%x\n",dest,data); */
|
||||||
|
if (flash_status_wait (dest, data) != data)
|
||||||
|
return ERR_PROG_ERROR;
|
||||||
|
|
||||||
|
if (flag)
|
||||||
|
enable_interrupts ();
|
||||||
|
|
||||||
|
return ERR_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* Copy memory to flash.
|
||||||
|
*/
|
||||||
|
|
||||||
|
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
||||||
|
{
|
||||||
|
ulong cp, wp;
|
||||||
|
ushort data;
|
||||||
|
int l;
|
||||||
|
int i, rc;
|
||||||
|
|
||||||
|
wp = (addr & ~1); /* get lower word aligned address */
|
||||||
|
printf ("Writing %d short data to 0x%p from 0x%p.\n ", cnt, wp, src);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* handle unaligned start bytes
|
||||||
|
*/
|
||||||
|
if ((l = addr - wp) != 0) {
|
||||||
|
data = 0;
|
||||||
|
for (i = 0, cp = wp; i < l; ++i, ++cp) {
|
||||||
|
data = (data >> 8) | (*(uchar *) cp << 8);
|
||||||
|
}
|
||||||
|
for (; i < 2 && cnt > 0; ++i) {
|
||||||
|
data = (data >> 8) | (*src++ << 8);
|
||||||
|
--cnt;
|
||||||
|
++cp;
|
||||||
|
}
|
||||||
|
for (; cnt == 0 && i < 2; ++i, ++cp) {
|
||||||
|
data = (data >> 8) | (*(uchar *) cp << 8);
|
||||||
|
}
|
||||||
|
|
||||||
|
if ((rc = write_word (info, wp, data)) != 0) {
|
||||||
|
return (rc);
|
||||||
|
}
|
||||||
|
wp += 2;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* handle word aligned part
|
||||||
|
*/
|
||||||
|
while (cnt >= 2) {
|
||||||
|
data = *((vu_short *) src);
|
||||||
|
if ((rc = write_word (info, wp, data)) != 0) {
|
||||||
|
return (rc);
|
||||||
|
}
|
||||||
|
src += 2;
|
||||||
|
wp += 2;
|
||||||
|
cnt -= 2;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (cnt == 0) {
|
||||||
|
printf ("\nDone.\n");
|
||||||
|
return ERR_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* handle unaligned tail bytes
|
||||||
|
*/
|
||||||
|
data = 0;
|
||||||
|
for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
|
||||||
|
data = (data >> 8) | (*src++ << 8);
|
||||||
|
--cnt;
|
||||||
|
}
|
||||||
|
for (; i < 2; ++i, ++cp) {
|
||||||
|
data = (data >> 8) | (*(uchar *) cp << 8);
|
||||||
|
}
|
||||||
|
|
||||||
|
return write_word (info, wp, data);
|
||||||
|
}
|
|
@ -0,0 +1,66 @@
|
||||||
|
/*
|
||||||
|
* Initialization stuff - taken from hermit
|
||||||
|
* (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
|
||||||
|
* Armadillo board HT1070
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
#include <config.h>
|
||||||
|
#include <version.h>
|
||||||
|
|
||||||
|
|
||||||
|
/* some parameters for the board */
|
||||||
|
/* setting up the memory */
|
||||||
|
#define SRAM_START 0x60000000
|
||||||
|
#define SRAM_SIZE 0x0000c000
|
||||||
|
|
||||||
|
.globl lowlevel_init
|
||||||
|
lowlevel_init:
|
||||||
|
mov r0, #0x70 /* 32-bit code + data, MMU mandatory */
|
||||||
|
mcr p15, 0, r0, c1, c0, 0 /* MMU init */
|
||||||
|
|
||||||
|
mov r0, #0
|
||||||
|
mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
|
||||||
|
mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
|
||||||
|
|
||||||
|
mov r0, #0x80000000 /* I/O base */
|
||||||
|
|
||||||
|
mov r1, #0x6 /* CLKCTL_73 in SYSCON3 */
|
||||||
|
add r2, r0, #0x2200 /* address of SYSCON3 in r2 */
|
||||||
|
str r1, [r2] /* set clock speed to 73.728 MHz */
|
||||||
|
|
||||||
|
mov r1, #0x81 /* 64KHz DRAM refresh period */
|
||||||
|
str r1, [r0, #0x200] /* set DRFPR */
|
||||||
|
|
||||||
|
mov r1, #0x500 /* permanent enable, 16bits wide */
|
||||||
|
add r1, r1, #0x42 /* 128Mbit, CAS lat = 2 SDRAM */
|
||||||
|
add r2, r0, #0x2300 /* load address in r2 */
|
||||||
|
str r1, [r2]
|
||||||
|
|
||||||
|
mov r1, #0x100 /* SDRAM refresh rate */
|
||||||
|
add r2, r0, #0x2340 /* load address in r2 */
|
||||||
|
str r1, [r2]
|
||||||
|
|
||||||
|
mov sp, #SRAM_START /* init stack pointer */
|
||||||
|
add sp, sp, #SRAM_SIZE
|
||||||
|
|
||||||
|
/* everything is fine now */
|
||||||
|
mov pc, lr
|
|
@ -0,0 +1,55 @@
|
||||||
|
/*
|
||||||
|
* (C) Copyright 2000
|
||||||
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
|
||||||
|
OUTPUT_ARCH(arm)
|
||||||
|
ENTRY(_start)
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
. = 0x00000000;
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
.text :
|
||||||
|
{
|
||||||
|
cpu/arm720t/start.o (.text)
|
||||||
|
*(.text)
|
||||||
|
}
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
.rodata : { *(.rodata) }
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
.data : { *(.data) }
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
.got : { *(.got) }
|
||||||
|
|
||||||
|
__u_boot_cmd_start = .;
|
||||||
|
.u_boot_cmd : { *(.u_boot_cmd) }
|
||||||
|
__u_boot_cmd_end = .;
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
__bss_start = .;
|
||||||
|
.bss : { *(.bss) }
|
||||||
|
_end = .;
|
||||||
|
}
|
|
@ -57,7 +57,7 @@ int cleanup_before_linux (void)
|
||||||
* and we set the CPU-speed to 73 MHz - see start.S for details
|
* and we set the CPU-speed to 73 MHz - see start.S for details
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
|
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
|
||||||
unsigned long i;
|
unsigned long i;
|
||||||
|
|
||||||
disable_interrupts ();
|
disable_interrupts ();
|
||||||
|
@ -95,7 +95,7 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
||||||
*
|
*
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM)
|
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO)
|
||||||
/* read co-processor 15, register #1 (control register) */
|
/* read co-processor 15, register #1 (control register) */
|
||||||
static unsigned long read_p15_c1(void)
|
static unsigned long read_p15_c1(void)
|
||||||
{
|
{
|
||||||
|
|
|
@ -180,7 +180,7 @@ void do_fiq (struct pt_regs *pt_regs)
|
||||||
|
|
||||||
void do_irq (struct pt_regs *pt_regs)
|
void do_irq (struct pt_regs *pt_regs)
|
||||||
{
|
{
|
||||||
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM)
|
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO)
|
||||||
printf ("interrupt request\n");
|
printf ("interrupt request\n");
|
||||||
show_regs (pt_regs);
|
show_regs (pt_regs);
|
||||||
bad_mode ();
|
bad_mode ();
|
||||||
|
@ -233,7 +233,7 @@ int interrupt_init (void)
|
||||||
|
|
||||||
/* set timer 2 counter */
|
/* set timer 2 counter */
|
||||||
lastdec = TIMER_LOAD_VAL;
|
lastdec = TIMER_LOAD_VAL;
|
||||||
#elif defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
|
#elif defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
|
||||||
/* disable all interrupts */
|
/* disable all interrupts */
|
||||||
IO_INTMR1 = 0;
|
IO_INTMR1 = 0;
|
||||||
|
|
||||||
|
@ -301,7 +301,7 @@ int interrupt_init (void)
|
||||||
*/
|
*/
|
||||||
|
|
||||||
|
|
||||||
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM)
|
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO)
|
||||||
|
|
||||||
void reset_timer (void)
|
void reset_timer (void)
|
||||||
{
|
{
|
||||||
|
|
|
@ -30,7 +30,7 @@
|
||||||
|
|
||||||
#include <common.h>
|
#include <common.h>
|
||||||
|
|
||||||
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
|
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
|
||||||
|
|
||||||
#include <clps7111.h>
|
#include <clps7111.h>
|
||||||
|
|
||||||
|
|
|
@ -188,7 +188,7 @@ _start_armboot: .word start_armboot
|
||||||
*************************************************************************
|
*************************************************************************
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
|
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
|
||||||
|
|
||||||
/* Interupt-Controller base addresses */
|
/* Interupt-Controller base addresses */
|
||||||
INTMR1: .word 0x80000280 @ 32 bit size
|
INTMR1: .word 0x80000280 @ 32 bit size
|
||||||
|
@ -209,7 +209,7 @@ SYSCON3: .word 0x80002200
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
cpu_init_crit:
|
cpu_init_crit:
|
||||||
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
|
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* mask all IRQs by clearing all bits in the INTMRs
|
* mask all IRQs by clearing all bits in the INTMRs
|
||||||
|
@ -495,7 +495,7 @@ fiq:
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
|
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
|
||||||
.align 5
|
.align 5
|
||||||
.globl reset_cpu
|
.globl reset_cpu
|
||||||
reset_cpu:
|
reset_cpu:
|
||||||
|
|
|
@ -34,67 +34,67 @@
|
||||||
|
|
||||||
/* Ethernet chip registers.
|
/* Ethernet chip registers.
|
||||||
*/
|
*/
|
||||||
#define SCBStatus 0 /* Rx/Command Unit Status *Word* */
|
#define SCBStatus 0 /* Rx/Command Unit Status *Word* */
|
||||||
#define SCBIntAckByte 1 /* Rx/Command Unit STAT/ACK byte */
|
#define SCBIntAckByte 1 /* Rx/Command Unit STAT/ACK byte */
|
||||||
#define SCBCmd 2 /* Rx/Command Unit Command *Word* */
|
#define SCBCmd 2 /* Rx/Command Unit Command *Word* */
|
||||||
#define SCBIntrCtlByte 3 /* Rx/Command Unit Intr.Control Byte */
|
#define SCBIntrCtlByte 3 /* Rx/Command Unit Intr.Control Byte */
|
||||||
#define SCBPointer 4 /* General purpose pointer. */
|
#define SCBPointer 4 /* General purpose pointer. */
|
||||||
#define SCBPort 8 /* Misc. commands and operands. */
|
#define SCBPort 8 /* Misc. commands and operands. */
|
||||||
#define SCBflash 12 /* Flash memory control. */
|
#define SCBflash 12 /* Flash memory control. */
|
||||||
#define SCBeeprom 14 /* EEPROM memory control. */
|
#define SCBeeprom 14 /* EEPROM memory control. */
|
||||||
#define SCBCtrlMDI 16 /* MDI interface control. */
|
#define SCBCtrlMDI 16 /* MDI interface control. */
|
||||||
#define SCBEarlyRx 20 /* Early receive byte count. */
|
#define SCBEarlyRx 20 /* Early receive byte count. */
|
||||||
#define SCBGenControl 28 /* 82559 General Control Register */
|
#define SCBGenControl 28 /* 82559 General Control Register */
|
||||||
#define SCBGenStatus 29 /* 82559 General Status register */
|
#define SCBGenStatus 29 /* 82559 General Status register */
|
||||||
|
|
||||||
/* 82559 SCB status word defnitions
|
/* 82559 SCB status word defnitions
|
||||||
*/
|
*/
|
||||||
#define SCB_STATUS_CX 0x8000 /* CU finished command (transmit) */
|
#define SCB_STATUS_CX 0x8000 /* CU finished command (transmit) */
|
||||||
#define SCB_STATUS_FR 0x4000 /* frame received */
|
#define SCB_STATUS_FR 0x4000 /* frame received */
|
||||||
#define SCB_STATUS_CNA 0x2000 /* CU left active state */
|
#define SCB_STATUS_CNA 0x2000 /* CU left active state */
|
||||||
#define SCB_STATUS_RNR 0x1000 /* receiver left ready state */
|
#define SCB_STATUS_RNR 0x1000 /* receiver left ready state */
|
||||||
#define SCB_STATUS_MDI 0x0800 /* MDI read/write cycle done */
|
#define SCB_STATUS_MDI 0x0800 /* MDI read/write cycle done */
|
||||||
#define SCB_STATUS_SWI 0x0400 /* software generated interrupt */
|
#define SCB_STATUS_SWI 0x0400 /* software generated interrupt */
|
||||||
#define SCB_STATUS_FCP 0x0100 /* flow control pause interrupt */
|
#define SCB_STATUS_FCP 0x0100 /* flow control pause interrupt */
|
||||||
|
|
||||||
#define SCB_INTACK_MASK 0xFD00 /* all the above */
|
#define SCB_INTACK_MASK 0xFD00 /* all the above */
|
||||||
|
|
||||||
#define SCB_INTACK_TX (SCB_STATUS_CX | SCB_STATUS_CNA)
|
#define SCB_INTACK_TX (SCB_STATUS_CX | SCB_STATUS_CNA)
|
||||||
#define SCB_INTACK_RX (SCB_STATUS_FR | SCB_STATUS_RNR)
|
#define SCB_INTACK_RX (SCB_STATUS_FR | SCB_STATUS_RNR)
|
||||||
|
|
||||||
/* System control block commands
|
/* System control block commands
|
||||||
*/
|
*/
|
||||||
/* CU Commands */
|
/* CU Commands */
|
||||||
#define CU_NOP 0x0000
|
#define CU_NOP 0x0000
|
||||||
#define CU_START 0x0010
|
#define CU_START 0x0010
|
||||||
#define CU_RESUME 0x0020
|
#define CU_RESUME 0x0020
|
||||||
#define CU_STATSADDR 0x0040 /* Load Dump Statistics ctrs addr */
|
#define CU_STATSADDR 0x0040 /* Load Dump Statistics ctrs addr */
|
||||||
#define CU_SHOWSTATS 0x0050 /* Dump statistics counters. */
|
#define CU_SHOWSTATS 0x0050 /* Dump statistics counters. */
|
||||||
#define CU_ADDR_LOAD 0x0060 /* Base address to add to CU commands */
|
#define CU_ADDR_LOAD 0x0060 /* Base address to add to CU commands */
|
||||||
#define CU_DUMPSTATS 0x0070 /* Dump then reset stats counters. */
|
#define CU_DUMPSTATS 0x0070 /* Dump then reset stats counters. */
|
||||||
|
|
||||||
/* RUC Commands */
|
/* RUC Commands */
|
||||||
#define RUC_NOP 0x0000
|
#define RUC_NOP 0x0000
|
||||||
#define RUC_START 0x0001
|
#define RUC_START 0x0001
|
||||||
#define RUC_RESUME 0x0002
|
#define RUC_RESUME 0x0002
|
||||||
#define RUC_ABORT 0x0004
|
#define RUC_ABORT 0x0004
|
||||||
#define RUC_ADDR_LOAD 0x0006 /* (seems not to clear on acceptance) */
|
#define RUC_ADDR_LOAD 0x0006 /* (seems not to clear on acceptance) */
|
||||||
#define RUC_RESUMENR 0x0007
|
#define RUC_RESUMENR 0x0007
|
||||||
|
|
||||||
#define CU_CMD_MASK 0x00f0
|
#define CU_CMD_MASK 0x00f0
|
||||||
#define RU_CMD_MASK 0x0007
|
#define RU_CMD_MASK 0x0007
|
||||||
|
|
||||||
#define SCB_M 0x0100 /* 0 = enable interrupt, 1 = disable */
|
#define SCB_M 0x0100 /* 0 = enable interrupt, 1 = disable */
|
||||||
#define SCB_SWI 0x0200 /* 1 - cause device to interrupt */
|
#define SCB_SWI 0x0200 /* 1 - cause device to interrupt */
|
||||||
|
|
||||||
#define CU_STATUS_MASK 0x00C0
|
#define CU_STATUS_MASK 0x00C0
|
||||||
#define RU_STATUS_MASK 0x003C
|
#define RU_STATUS_MASK 0x003C
|
||||||
|
|
||||||
#define RU_STATUS_IDLE (0<<2)
|
#define RU_STATUS_IDLE (0<<2)
|
||||||
#define RU_STATUS_SUS (1<<2)
|
#define RU_STATUS_SUS (1<<2)
|
||||||
#define RU_STATUS_NORES (2<<2)
|
#define RU_STATUS_NORES (2<<2)
|
||||||
#define RU_STATUS_READY (4<<2)
|
#define RU_STATUS_READY (4<<2)
|
||||||
#define RU_STATUS_NO_RBDS_SUS ((1<<2)|(8<<2))
|
#define RU_STATUS_NO_RBDS_SUS ((1<<2)|(8<<2))
|
||||||
#define RU_STATUS_NO_RBDS_NORES ((2<<2)|(8<<2))
|
#define RU_STATUS_NO_RBDS_NORES ((2<<2)|(8<<2))
|
||||||
#define RU_STATUS_NO_RBDS_READY ((4<<2)|(8<<2))
|
#define RU_STATUS_NO_RBDS_READY ((4<<2)|(8<<2))
|
||||||
|
|
||||||
|
@ -138,27 +138,27 @@ struct RxFD {
|
||||||
};
|
};
|
||||||
|
|
||||||
#define RFD_STATUS_C 0x8000 /* completion of received frame */
|
#define RFD_STATUS_C 0x8000 /* completion of received frame */
|
||||||
#define RFD_STATUS_OK 0x2000 /* frame received with no errors */
|
#define RFD_STATUS_OK 0x2000 /* frame received with no errors */
|
||||||
|
|
||||||
#define RFD_CONTROL_EL 0x8000 /* 1=last RFD in RFA */
|
#define RFD_CONTROL_EL 0x8000 /* 1=last RFD in RFA */
|
||||||
#define RFD_CONTROL_S 0x4000 /* 1=suspend RU after receiving frame */
|
#define RFD_CONTROL_S 0x4000 /* 1=suspend RU after receiving frame */
|
||||||
#define RFD_CONTROL_H 0x0010 /* 1=RFD is a header RFD */
|
#define RFD_CONTROL_H 0x0010 /* 1=RFD is a header RFD */
|
||||||
#define RFD_CONTROL_SF 0x0008 /* 0=simplified, 1=flexible mode */
|
#define RFD_CONTROL_SF 0x0008 /* 0=simplified, 1=flexible mode */
|
||||||
|
|
||||||
#define RFD_COUNT_MASK 0x3fff
|
#define RFD_COUNT_MASK 0x3fff
|
||||||
#define RFD_COUNT_F 0x4000
|
#define RFD_COUNT_F 0x4000
|
||||||
#define RFD_COUNT_EOF 0x8000
|
#define RFD_COUNT_EOF 0x8000
|
||||||
|
|
||||||
#define RFD_RX_CRC 0x0800 /* crc error */
|
#define RFD_RX_CRC 0x0800 /* crc error */
|
||||||
#define RFD_RX_ALIGNMENT 0x0400 /* alignment error */
|
#define RFD_RX_ALIGNMENT 0x0400 /* alignment error */
|
||||||
#define RFD_RX_RESOURCE 0x0200 /* out of space, no resources */
|
#define RFD_RX_RESOURCE 0x0200 /* out of space, no resources */
|
||||||
#define RFD_RX_DMA_OVER 0x0100 /* DMA overrun */
|
#define RFD_RX_DMA_OVER 0x0100 /* DMA overrun */
|
||||||
#define RFD_RX_SHORT 0x0080 /* short frame error */
|
#define RFD_RX_SHORT 0x0080 /* short frame error */
|
||||||
#define RFD_RX_LENGTH 0x0020
|
#define RFD_RX_LENGTH 0x0020
|
||||||
#define RFD_RX_ERROR 0x0010 /* receive error */
|
#define RFD_RX_ERROR 0x0010 /* receive error */
|
||||||
#define RFD_RX_NO_ADR_MATCH 0x0004 /* no address match */
|
#define RFD_RX_NO_ADR_MATCH 0x0004 /* no address match */
|
||||||
#define RFD_RX_IA_MATCH 0x0002 /* individual address does not match */
|
#define RFD_RX_IA_MATCH 0x0002 /* individual address does not match */
|
||||||
#define RFD_RX_TCO 0x0001 /* TCO indication */
|
#define RFD_RX_TCO 0x0001 /* TCO indication */
|
||||||
|
|
||||||
/* Transmit frame descriptors
|
/* Transmit frame descriptors
|
||||||
*/
|
*/
|
||||||
|
@ -176,45 +176,45 @@ struct TxFD { /* Transmit frame descriptor set. */
|
||||||
};
|
};
|
||||||
|
|
||||||
#define TxCB_CMD_TRANSMIT 0x0004 /* transmit command */
|
#define TxCB_CMD_TRANSMIT 0x0004 /* transmit command */
|
||||||
#define TxCB_CMD_SF 0x0008 /* 0=simplified, 1=flexible mode */
|
#define TxCB_CMD_SF 0x0008 /* 0=simplified, 1=flexible mode */
|
||||||
#define TxCB_CMD_NC 0x0010 /* 0=CRC insert by controller */
|
#define TxCB_CMD_NC 0x0010 /* 0=CRC insert by controller */
|
||||||
#define TxCB_CMD_I 0x2000 /* generate interrupt on completion */
|
#define TxCB_CMD_I 0x2000 /* generate interrupt on completion */
|
||||||
#define TxCB_CMD_S 0x4000 /* suspend on completion */
|
#define TxCB_CMD_S 0x4000 /* suspend on completion */
|
||||||
#define TxCB_CMD_EL 0x8000 /* last command block in CBL */
|
#define TxCB_CMD_EL 0x8000 /* last command block in CBL */
|
||||||
|
|
||||||
#define TxCB_COUNT_MASK 0x3fff
|
#define TxCB_COUNT_MASK 0x3fff
|
||||||
#define TxCB_COUNT_EOF 0x8000
|
#define TxCB_COUNT_EOF 0x8000
|
||||||
|
|
||||||
/* The Speedo3 Rx and Tx frame/buffer descriptors.
|
/* The Speedo3 Rx and Tx frame/buffer descriptors.
|
||||||
*/
|
*/
|
||||||
struct descriptor { /* A generic descriptor. */
|
struct descriptor { /* A generic descriptor. */
|
||||||
volatile u16 status;
|
volatile u16 status;
|
||||||
volatile u16 command;
|
volatile u16 command;
|
||||||
volatile u32 link; /* struct descriptor * */
|
volatile u32 link; /* struct descriptor * */
|
||||||
|
|
||||||
unsigned char params[0];
|
unsigned char params[0];
|
||||||
};
|
};
|
||||||
|
|
||||||
#define CFG_CMD_EL 0x8000
|
#define CFG_CMD_EL 0x8000
|
||||||
#define CFG_CMD_SUSPEND 0x4000
|
#define CFG_CMD_SUSPEND 0x4000
|
||||||
#define CFG_CMD_INT 0x2000
|
#define CFG_CMD_INT 0x2000
|
||||||
#define CFG_CMD_IAS 0x0001 /* individual address setup */
|
#define CFG_CMD_IAS 0x0001 /* individual address setup */
|
||||||
#define CFG_CMD_CONFIGURE 0x0002 /* configure */
|
#define CFG_CMD_CONFIGURE 0x0002 /* configure */
|
||||||
|
|
||||||
#define CFG_STATUS_C 0x8000
|
#define CFG_STATUS_C 0x8000
|
||||||
#define CFG_STATUS_OK 0x2000
|
#define CFG_STATUS_OK 0x2000
|
||||||
|
|
||||||
/* Misc.
|
/* Misc.
|
||||||
*/
|
*/
|
||||||
#define NUM_RX_DESC PKTBUFSRX
|
#define NUM_RX_DESC PKTBUFSRX
|
||||||
#define NUM_TX_DESC 1 /* Number of TX descriptors */
|
#define NUM_TX_DESC 1 /* Number of TX descriptors */
|
||||||
|
|
||||||
#define TOUT_LOOP 1000000
|
#define TOUT_LOOP 1000000
|
||||||
|
|
||||||
#define ETH_ALEN 6
|
#define ETH_ALEN 6
|
||||||
|
|
||||||
static struct RxFD rx_ring[NUM_RX_DESC]; /* RX descriptor ring */
|
static struct RxFD rx_ring[NUM_RX_DESC]; /* RX descriptor ring */
|
||||||
static struct TxFD tx_ring[NUM_TX_DESC]; /* TX descriptor ring */
|
static struct TxFD tx_ring[NUM_TX_DESC]; /* TX descriptor ring */
|
||||||
static int rx_next; /* RX descriptor ring pointer */
|
static int rx_next; /* RX descriptor ring pointer */
|
||||||
static int tx_next; /* TX descriptor ring pointer */
|
static int tx_next; /* TX descriptor ring pointer */
|
||||||
static int tx_threshold;
|
static int tx_threshold;
|
||||||
|
@ -277,9 +277,9 @@ static inline int INL (struct eth_device *dev, u_long addr)
|
||||||
return le32_to_cpu (*(volatile u32 *) (addr + dev->iobase));
|
return le32_to_cpu (*(volatile u32 *) (addr + dev->iobase));
|
||||||
}
|
}
|
||||||
|
|
||||||
int miiphy_read (unsigned char addr,
|
int miiphy_read (unsigned char addr,
|
||||||
unsigned char reg,
|
unsigned char reg,
|
||||||
unsigned short *value)
|
unsigned short *value)
|
||||||
{
|
{
|
||||||
int cmd = (2 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
|
int cmd = (2 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
|
||||||
|
|
||||||
|
@ -296,7 +296,7 @@ int miiphy_read (unsigned char addr,
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
int miiphy_write (unsigned char addr,
|
int miiphy_write (unsigned char addr,
|
||||||
unsigned char reg,
|
unsigned char reg,
|
||||||
unsigned short value)
|
unsigned short value)
|
||||||
{
|
{
|
||||||
|
@ -764,12 +764,12 @@ int eepro100_write_eeprom (struct eth_device* dev, int location, int addr_len, u
|
||||||
OUTW(dev, EE_ENB | dataval, SCBeeprom);
|
OUTW(dev, EE_ENB | dataval, SCBeeprom);
|
||||||
udelay(1);
|
udelay(1);
|
||||||
|
|
||||||
datalong = datalong << 1; /* Adjust significant data bit*/
|
datalong = datalong << 1; /* Adjust significant data bit*/
|
||||||
}
|
}
|
||||||
|
|
||||||
/* Finish up command (toggle CS) */
|
/* Finish up command (toggle CS) */
|
||||||
OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom);
|
OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom);
|
||||||
udelay(1); /* delay for more than 250 ns */
|
udelay(1); /* delay for more than 250 ns */
|
||||||
OUTW(dev, EE_ENB, SCBeeprom);
|
OUTW(dev, EE_ENB, SCBeeprom);
|
||||||
|
|
||||||
/* Wait for programming ready (D0 = 1) */
|
/* Wait for programming ready (D0 = 1) */
|
||||||
|
|
|
@ -32,6 +32,8 @@
|
||||||
/* include IMPA7 specific hardware file if there was one */
|
/* include IMPA7 specific hardware file if there was one */
|
||||||
#elif defined(CONFIG_EP7312)
|
#elif defined(CONFIG_EP7312)
|
||||||
/* include EP7312 specific hardware file if there was one */
|
/* include EP7312 specific hardware file if there was one */
|
||||||
|
#elif defined(CONFIG_ARMADILLO)
|
||||||
|
/* include armadillo specific hardware file if there was one */
|
||||||
#else
|
#else
|
||||||
#error No hardware file defined for this configuration
|
#error No hardware file defined for this configuration
|
||||||
#endif
|
#endif
|
||||||
|
|
|
@ -0,0 +1,149 @@
|
||||||
|
/*
|
||||||
|
* (C) Copyright 2000
|
||||||
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
||||||
|
* Marius Groeger <mgroeger@sysgo.de>
|
||||||
|
*
|
||||||
|
* Configuation settings for the EP7312 board.
|
||||||
|
*
|
||||||
|
* Modified to work on Armadillo HT1070 ARM720T board
|
||||||
|
* (C) Copyright 2005 Rowel Atienza rowel@diwalabs.com
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __CONFIG_H
|
||||||
|
#define __CONFIG_H
|
||||||
|
|
||||||
|
/*
|
||||||
|
* If we are developing, we might want to start armboot from ram
|
||||||
|
* so we MUST NOT initialize critical regs like mem-timing ...
|
||||||
|
*/
|
||||||
|
/*#define CONFIG_INIT_CRITICAL*/ /* undef for developing */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* High Level Configuration Options
|
||||||
|
* (easy to change)
|
||||||
|
*/
|
||||||
|
#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
|
||||||
|
#define CONFIG_ARMADILLO 1 /* on an Armadillo Board */
|
||||||
|
#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
|
||||||
|
#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
|
||||||
|
|
||||||
|
#undef CONFIG_USE_IRQ /* don't need them anymore */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Size of malloc() pool
|
||||||
|
*/
|
||||||
|
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
|
||||||
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Hardware drivers
|
||||||
|
*/
|
||||||
|
#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
|
||||||
|
#define CS8900_BASE 0x20000300 /* armadillo board */
|
||||||
|
#define CS8900_BUS16 1
|
||||||
|
#undef CS8900_BUS32
|
||||||
|
|
||||||
|
/*
|
||||||
|
* select serial console configuration
|
||||||
|
*/
|
||||||
|
#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
|
||||||
|
|
||||||
|
/* allow to overwrite serial and ethaddr */
|
||||||
|
#define CONFIG_ENV_OVERWRITE
|
||||||
|
|
||||||
|
#define CONFIG_BAUDRATE 115200
|
||||||
|
|
||||||
|
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
|
||||||
|
|
||||||
|
#define CONFIG_COMMANDS (CONFIG_CMD_DFL) /* | CFG_CMD_JFFS2)*/
|
||||||
|
|
||||||
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
||||||
|
#include <cmd_confdefs.h>
|
||||||
|
|
||||||
|
#define CONFIG_BOOTDELAY 3
|
||||||
|
#define CONFIG_BOOTARGS "root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200"
|
||||||
|
|
||||||
|
#define CONFIG_BOOTCOMMAND "bootm 40000 180000"
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Miscellaneous configurable options
|
||||||
|
*/
|
||||||
|
#define CFG_LONGHELP /* undef to save memory */
|
||||||
|
#define CFG_PROMPT "ARMADILLO # " /* Monitor Command Prompt */
|
||||||
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||||
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||||
|
#define CFG_MAXARGS 16 /* max number of command args */
|
||||||
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||||
|
|
||||||
|
#define CFG_MEMTEST_START 0xc0400000 /* memtest works on */
|
||||||
|
#define CFG_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
|
||||||
|
|
||||||
|
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
||||||
|
|
||||||
|
#define CFG_LOAD_ADDR 0x00040000 /* default load address for armadillo: kernel img is here*/
|
||||||
|
|
||||||
|
#define CFG_HZ 2000 /* decrementer freq: 2 kHz */
|
||||||
|
|
||||||
|
/* valid baudrates */
|
||||||
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* Stack sizes
|
||||||
|
*
|
||||||
|
* The stack sizes are set up in start.S using the settings below
|
||||||
|
*/
|
||||||
|
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
|
||||||
|
#ifdef CONFIG_USE_IRQ
|
||||||
|
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
|
||||||
|
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* Physical Memory Map
|
||||||
|
*/
|
||||||
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
||||||
|
#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
|
||||||
|
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB armadillo SDRAM */
|
||||||
|
|
||||||
|
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
|
||||||
|
#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
|
||||||
|
|
||||||
|
#define CFG_FLASH_BASE PHYS_FLASH_1
|
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* FLASH and environment organization
|
||||||
|
*/
|
||||||
|
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
||||||
|
#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
|
||||||
|
|
||||||
|
/* timeout values are in ticks */
|
||||||
|
#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
|
||||||
|
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
|
||||||
|
|
||||||
|
#define CFG_ENV_IS_IN_FLASH 1
|
||||||
|
#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* Addr of Environment Sector */
|
||||||
|
#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
|
||||||
|
|
||||||
|
#define CONFIG_CMDLINE_TAG
|
||||||
|
#define CONFIG_SETUP_MEMORY_TAGS
|
||||||
|
#define CONFIG_INITRD_TAG
|
||||||
|
|
||||||
|
#endif /* __CONFIG_H */
|
|
@ -167,7 +167,7 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
|
||||||
do_reset (cmdtp, flag, argc, argv);
|
do_reset (cmdtp, flag, argc, argv);
|
||||||
}
|
}
|
||||||
|
|
||||||
#if defined(CONFIG_B2) || defined(CONFIG_EVB4510)
|
#if defined(CONFIG_B2) || defined(CONFIG_EVB4510) || defined(CONFIG_ARMADILLO)
|
||||||
/*
|
/*
|
||||||
*we need to copy the ramdisk to SRAM to let Linux boot
|
*we need to copy the ramdisk to SRAM to let Linux boot
|
||||||
*/
|
*/
|
||||||
|
|
Loading…
Reference in New Issue