Minor coding style cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
This commit is contained in:
parent
ff285ca07e
commit
05bf4919c1
248
CHANGELOG
248
CHANGELOG
|
@ -1,3 +1,206 @@
|
||||||
|
commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
|
||||||
|
Author: Vlad Lungu <vlad@comsys.ro>
|
||||||
|
Date: Thu Oct 4 20:47:10 2007 +0300
|
||||||
|
|
||||||
|
Fix NE2000 driver:
|
||||||
|
|
||||||
|
Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
|
||||||
|
to do anything in eth_stop() if eth_init() was not called.
|
||||||
|
Simplified RX path in order to avoid timeouts on really really
|
||||||
|
fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
|
||||||
|
clever enough to cope with 1 packet per eth_rx().
|
||||||
|
|
||||||
|
Signed-off-by: Vlad Lungu <vlad@comsys.ro>
|
||||||
|
|
||||||
|
commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
|
||||||
|
Author: Detlev Zundel <dzu@denx.de>
|
||||||
|
Date: Fri Oct 19 16:47:26 2007 +0200
|
||||||
|
|
||||||
|
Fix two typos.
|
||||||
|
|
||||||
|
Signed-off-by: Detlev Zundel <dzu@denx.de>
|
||||||
|
|
||||||
|
commit 281df457c1aa50d2752165d0c5c3282d4027b974
|
||||||
|
Author: Tony Li <tony.li@freescale.com>
|
||||||
|
Date: Thu Oct 18 17:47:19 2007 +0800
|
||||||
|
|
||||||
|
mpc83xx: Add configure entry for MPC83xx ATM support
|
||||||
|
|
||||||
|
Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
|
||||||
|
Makfile and MAKEALL
|
||||||
|
|
||||||
|
Signed-off-by: Tony Li <tony.li@freescale.com>
|
||||||
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
||||||
|
|
||||||
|
commit d2646554f529a9577515eceb0ec5eceee18244ba
|
||||||
|
Author: Tony Li <tony.li@freescale.com>
|
||||||
|
Date: Thu Oct 18 17:44:38 2007 +0800
|
||||||
|
|
||||||
|
mpc83xx: pq-mds-pib.c typo error
|
||||||
|
|
||||||
|
Correct to val8 from val.
|
||||||
|
|
||||||
|
Signed-off-by: Tony Li <tony.li@freescale.com>
|
||||||
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
||||||
|
|
||||||
|
commit 3e11ae80fec1ee12194940955431186abf6009c2
|
||||||
|
Author: Stefan Roese <sr@denx.de>
|
||||||
|
Date: Wed Oct 17 15:40:19 2007 +0200
|
||||||
|
|
||||||
|
ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
|
||||||
|
|
||||||
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||||
|
|
||||||
|
commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
|
||||||
|
Author: runet@innovsys.com <runet@innovsys.com>
|
||||||
|
Date: Tue Oct 16 14:50:40 2007 -0500
|
||||||
|
|
||||||
|
Make MPC8266ADS board compile again.
|
||||||
|
|
||||||
|
Signed-off-by: Runet Torgersen <runet@innovsys.com>
|
||||||
|
|
||||||
|
commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
|
||||||
|
Author: Jon Loeliger <jdl@freescale.com>
|
||||||
|
Date: Mon Aug 27 12:41:03 2007 -0500
|
||||||
|
|
||||||
|
86xx: Allow for fewer DDR slots per memory controller.
|
||||||
|
|
||||||
|
As a direct correlation exists between DDR DIMM slots
|
||||||
|
and SPD EEPROM addresses used to configure them, use
|
||||||
|
the individually defined SPD_EEPROM_ADDRESS* values to
|
||||||
|
determine if a DDR DIMM slot should have its SPD
|
||||||
|
configuration read or not.
|
||||||
|
|
||||||
|
Effectively, this now allows for 1 or 2 DIMM slots
|
||||||
|
per memory controller.
|
||||||
|
|
||||||
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
||||||
|
|
||||||
|
commit 4d4a945e189a2f384c66432316da2788a0ac1607
|
||||||
|
Author: Rodolfo Giometti <giometti@enneenne.com>
|
||||||
|
Date: Mon Oct 15 11:59:17 2007 +0200
|
||||||
|
|
||||||
|
PXA USB OHCI: "usb stop" implementation.
|
||||||
|
|
||||||
|
Some USB keys need to be switched off before loading the kernel
|
||||||
|
otherwise they can remain in an undefined status which prevents them
|
||||||
|
to be correctly recognized by the kernel.
|
||||||
|
|
||||||
|
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
|
||||||
|
|
||||||
|
commit e2e93442e558cf1500e92861f99713b2f045ea22
|
||||||
|
Author: Stefan Roese <sr@denx.de>
|
||||||
|
Date: Mon Oct 15 11:39:00 2007 +0200
|
||||||
|
|
||||||
|
ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
|
||||||
|
|
||||||
|
The I2C bootstrap values that can be setup via the "bootstrap" command,
|
||||||
|
were setup incorrect regarding the generation of the internal sync PCI
|
||||||
|
clock. The values for PLB clock == 133MHz were slighly incorrect and the
|
||||||
|
values for PLB clock == 166MHz were totally incorrect. This could
|
||||||
|
lead to a hangup upon booting while PCI configuration scan.
|
||||||
|
|
||||||
|
This patch fixes this issue and configures valid PCI divisor values
|
||||||
|
for the sync PCI clock, with respect to the provided external async
|
||||||
|
PCI frequency.
|
||||||
|
|
||||||
|
Here the values of the formula in the chapter 14.2 "PCI clocking"
|
||||||
|
from the 440EPx users manual:
|
||||||
|
|
||||||
|
AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
|
||||||
|
|
||||||
|
33MHz async PCI frequency:
|
||||||
|
PLB = 133:
|
||||||
|
=> 32 <= 44.3 <= 65 (div = 3)
|
||||||
|
|
||||||
|
PLB = 166:
|
||||||
|
=> 32 <= 55.3 <= 65 (div = 3)
|
||||||
|
|
||||||
|
66MHz async PCI frequency:
|
||||||
|
PLB = 133:
|
||||||
|
=> 65 <= 66.5 <= 132 (div = 2)
|
||||||
|
|
||||||
|
PLB = 166:
|
||||||
|
=> 65 <= 83 <= 132 (div = 2)
|
||||||
|
|
||||||
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||||
|
|
||||||
|
commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
|
||||||
|
Author: Stefan Roese <sr@denx.de>
|
||||||
|
Date: Mon Oct 15 11:29:33 2007 +0200
|
||||||
|
|
||||||
|
ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
|
||||||
|
|
||||||
|
The BCSR status bit for the 66MHz PCI operation was correctly
|
||||||
|
addressed (MSB/LSB problem). Now the correct currently setup
|
||||||
|
PCI frequency is displayed upon bootup.
|
||||||
|
|
||||||
|
This patch also fixes this problem on Rainier & Yellowstone, since these
|
||||||
|
boards use the same souce code as Sequoia & Yosemite do.
|
||||||
|
|
||||||
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||||
|
|
||||||
|
commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
|
||||||
|
Author: Martin Krause <martin.krause@tqs.de>
|
||||||
|
Date: Wed Sep 26 17:55:56 2007 +0200
|
||||||
|
|
||||||
|
TQM860M: adjust for doubled flash sector size.
|
||||||
|
|
||||||
|
Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
|
||||||
|
doubled sector size.
|
||||||
|
|
||||||
|
Signed-off-by: Martin Krause <martin.krause@tqs.de>
|
||||||
|
|
||||||
|
commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
|
||||||
|
Author: Jens Gehrlein <jens.gehrlein@tqs.de>
|
||||||
|
Date: Wed Sep 26 17:55:54 2007 +0200
|
||||||
|
|
||||||
|
TQM8xx: Fix CAN timing.
|
||||||
|
|
||||||
|
Signed-off-by: Martin Krause <martin.krause@tqs.de>
|
||||||
|
|
||||||
|
commit d43e489baf02afae49077791fb22332d240d8656
|
||||||
|
Author: Martin Krause <martin.krause@tqs.de>
|
||||||
|
Date: Thu Sep 27 14:54:36 2007 +0200
|
||||||
|
|
||||||
|
TQM866M: fix SDRAM refresh
|
||||||
|
|
||||||
|
At 133 MHz the current SDRAM refresh rate is too fast
|
||||||
|
(measured 4 * 1.17 us).
|
||||||
|
CFG_MAMR_PTA changes from 39 to 97. This result
|
||||||
|
in a refresh rate of 4 * 7.8 us at the default clock
|
||||||
|
50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
|
||||||
|
This is a compromise until a new method is found to
|
||||||
|
adjust the refresh rate.
|
||||||
|
|
||||||
|
Signed-off-by: Martin Krause <martin.krause@tqs.de>
|
||||||
|
|
||||||
|
commit 9ef57bbee1c67cc01da2026c242c4692db32be36
|
||||||
|
Author: Martin Krause <martin.krause@tqs.de>
|
||||||
|
Date: Wed Sep 26 17:55:55 2007 +0200
|
||||||
|
|
||||||
|
TQM866M: adjust for doubled flash sector size.
|
||||||
|
|
||||||
|
Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
|
||||||
|
doubled sector size.
|
||||||
|
|
||||||
|
Signed-off-by: Martin Krause <martin.krause@tqs.de>
|
||||||
|
|
||||||
|
commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
|
||||||
|
Author: Michal Simek <monstr@monstr.eu>
|
||||||
|
Date: Sun Oct 14 16:12:29 2007 +0200
|
||||||
|
|
||||||
|
[FIX] XUPV2P change command handling
|
||||||
|
and remove code violation
|
||||||
|
|
||||||
|
commit 636400198228d96983c06657b17f760f5989958e
|
||||||
|
Author: Wolfgang Denk <wd@denx.de>
|
||||||
|
Date: Sun Oct 14 00:13:19 2007 +0200
|
||||||
|
|
||||||
|
Prepare for 1.3.0-rc3 release
|
||||||
|
|
||||||
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
||||||
|
|
||||||
commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
|
commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
|
||||||
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
||||||
Date: Sat Sep 29 13:41:37 2007 +0200
|
Date: Sat Sep 29 13:41:37 2007 +0200
|
||||||
|
@ -109,6 +312,26 @@ Date: Mon Oct 1 09:51:50 2007 +0200
|
||||||
|
|
||||||
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
|
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
|
||||||
|
|
||||||
|
commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
|
||||||
|
Author: Timo Ketola <timo.ketola@exertus.fi>
|
||||||
|
Date: Mon Sep 24 14:50:32 2007 +0300
|
||||||
|
|
||||||
|
Bugfix: Use only one PTD for one endpoint
|
||||||
|
|
||||||
|
Original isp116x-hcd code prepared multiple PTDs for longer than 16
|
||||||
|
byte transfers for one endpoint. That is unnecessary because the
|
||||||
|
ISP116x is able to split long data from one PTD into multiple
|
||||||
|
transactions based on the buffer size of the endpoint. It also caused
|
||||||
|
serious problems if the endpoint NAKed some of the transactions. In
|
||||||
|
that case ISP116x wouldn't notice that the other PTDs were for the same
|
||||||
|
endpoint and would try the other PTDs possibly out of order. That would
|
||||||
|
break the whole transfer.
|
||||||
|
|
||||||
|
This patch makes isp116x_submit_job to use one PTD for one transfer.
|
||||||
|
|
||||||
|
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
|
||||||
|
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
|
||||||
|
|
||||||
commit 86ec86c04326c3913178a7679aa910de071da75d
|
commit 86ec86c04326c3913178a7679aa910de071da75d
|
||||||
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
||||||
Date: Thu Sep 27 23:27:47 2007 +0200
|
Date: Thu Sep 27 23:27:47 2007 +0200
|
||||||
|
@ -331,6 +554,12 @@ Date: Mon Sep 10 17:13:49 2007 +0900
|
||||||
|
|
||||||
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
|
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
|
||||||
|
|
||||||
|
commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
|
||||||
|
Author: Michal Simek <monstr@monstr.eu>
|
||||||
|
Date: Sun Sep 16 20:51:57 2007 +0200
|
||||||
|
|
||||||
|
[FIX] remove files form repository
|
||||||
|
|
||||||
commit 67c31036acaaaa992fc346cc89db0909a7e733c4
|
commit 67c31036acaaaa992fc346cc89db0909a7e733c4
|
||||||
Author: Wolfgang Denk <wd@denx.de>
|
Author: Wolfgang Denk <wd@denx.de>
|
||||||
Date: Sun Sep 16 17:10:04 2007 +0200
|
Date: Sun Sep 16 17:10:04 2007 +0200
|
||||||
|
@ -478,6 +707,25 @@ Date: Sat Sep 15 11:55:42 2007 +0200
|
||||||
|
|
||||||
[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
|
[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
|
||||||
|
|
||||||
|
commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
|
||||||
|
Author: Michal Simek <monstr@monstr.eu>
|
||||||
|
Date: Sat Sep 15 00:03:35 2007 +0200
|
||||||
|
|
||||||
|
Synchronize with U-BOOT mainline
|
||||||
|
|
||||||
|
commit d7fee32b7e61fe11c64e371cde79faa4768e8350
|
||||||
|
Author: Sam Sparks <SSparks@twacs.com>
|
||||||
|
Date: Fri Sep 14 11:14:42 2007 -0600
|
||||||
|
|
||||||
|
Update MPC8349ITX*_config to place config.tmp in right place.
|
||||||
|
|
||||||
|
MPC834ITX*_config does not store config.tmp at the correct locatation,
|
||||||
|
causing MPC8349ITXGP to have the wrong TEXT_BASE.
|
||||||
|
|
||||||
|
Signed-off-by: Sam Sparks <SSparks@twacs.com>
|
||||||
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
||||||
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
||||||
|
|
||||||
commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
|
commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
|
||||||
Author: Bartlomiej Sieka <tur@semihalf.com>
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
||||||
Date: Thu Sep 13 18:21:48 2007 +0200
|
Date: Thu Sep 13 18:21:48 2007 +0200
|
||||||
|
|
18
Makefile
18
Makefile
|
@ -393,7 +393,7 @@ BC3450_config: unconfig
|
||||||
cpci5200_config: unconfig
|
cpci5200_config: unconfig
|
||||||
@$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
|
@$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
|
||||||
|
|
||||||
hmi1001_config: unconfig
|
hmi1001_config: unconfig
|
||||||
@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
|
@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
|
||||||
|
|
||||||
Lite5200_config \
|
Lite5200_config \
|
||||||
|
@ -435,7 +435,7 @@ icecube_5100_config: unconfig
|
||||||
}
|
}
|
||||||
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
|
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
|
||||||
|
|
||||||
jupiter_config: unconfig
|
jupiter_config: unconfig
|
||||||
@$(MKCONFIG) jupiter ppc mpc5xxx jupiter
|
@$(MKCONFIG) jupiter ppc mpc5xxx jupiter
|
||||||
|
|
||||||
v38b_config: unconfig
|
v38b_config: unconfig
|
||||||
|
@ -640,9 +640,9 @@ TQM5200_STK100_config: unconfig
|
||||||
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
|
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
|
||||||
}
|
}
|
||||||
@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
|
@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
|
||||||
uc101_config: unconfig
|
uc101_config: unconfig
|
||||||
@$(MKCONFIG) uc101 ppc mpc5xxx uc101
|
@$(MKCONFIG) uc101 ppc mpc5xxx uc101
|
||||||
motionpro_config: unconfig
|
motionpro_config: unconfig
|
||||||
@$(MKCONFIG) motionpro ppc mpc5xxx motionpro
|
@$(MKCONFIG) motionpro ppc mpc5xxx motionpro
|
||||||
|
|
||||||
|
|
||||||
|
@ -930,7 +930,7 @@ RPXlite_DW_NVRAM_config \
|
||||||
RPXlite_DW_NVRAM_64_config \
|
RPXlite_DW_NVRAM_64_config \
|
||||||
RPXlite_DW_NVRAM_LCD_config \
|
RPXlite_DW_NVRAM_LCD_config \
|
||||||
RPXlite_DW_NVRAM_64_LCD_config \
|
RPXlite_DW_NVRAM_64_LCD_config \
|
||||||
RPXlite_DW_config: unconfig
|
RPXlite_DW_config: unconfig
|
||||||
@mkdir -p $(obj)include
|
@mkdir -p $(obj)include
|
||||||
@ >$(obj)include/config.h
|
@ >$(obj)include/config.h
|
||||||
@[ -z "$(findstring _64,$@)" ] || \
|
@[ -z "$(findstring _64,$@)" ] || \
|
||||||
|
@ -1793,7 +1793,7 @@ MPC832XEMDS_ATM_config: unconfig
|
||||||
echo -n "...ATM..." ; \
|
echo -n "...ATM..." ; \
|
||||||
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
|
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
|
||||||
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
|
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
|
||||||
fi ;
|
fi ;
|
||||||
@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
|
@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
|
||||||
|
|
||||||
MPC8349EMDS_config: unconfig
|
MPC8349EMDS_config: unconfig
|
||||||
|
@ -2001,13 +2001,13 @@ AmigaOneG3SE_config: unconfig
|
||||||
BAB7xx_config: unconfig
|
BAB7xx_config: unconfig
|
||||||
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
|
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
|
||||||
|
|
||||||
CPCI750_config: unconfig
|
CPCI750_config: unconfig
|
||||||
@$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
|
@$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
|
||||||
|
|
||||||
DB64360_config: unconfig
|
DB64360_config: unconfig
|
||||||
@$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
|
@$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
|
||||||
|
|
||||||
DB64460_config: unconfig
|
DB64460_config: unconfig
|
||||||
@$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
|
@$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
|
||||||
|
|
||||||
ELPPC_config: unconfig
|
ELPPC_config: unconfig
|
||||||
|
|
|
@ -745,14 +745,12 @@ static void pcnet_reset_8390(void)
|
||||||
|
|
||||||
PRINTK("nic base is %lx\n", nic_base);
|
PRINTK("nic base is %lx\n", nic_base);
|
||||||
|
|
||||||
#if 1
|
|
||||||
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
|
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
|
||||||
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
|
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
|
||||||
n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
|
n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
|
||||||
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
|
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
|
||||||
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
|
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
|
||||||
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
|
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
|
||||||
#endif
|
|
||||||
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
|
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
|
||||||
|
|
||||||
n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
|
n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
|
||||||
|
@ -847,12 +845,9 @@ void uboot_push_packet_len(int len) {
|
||||||
}
|
}
|
||||||
plen[nrx] = len;
|
plen[nrx] = len;
|
||||||
dp83902a_recv(&pbuf[nrx*2000], len);
|
dp83902a_recv(&pbuf[nrx*2000], len);
|
||||||
/*Just pass it to the upper layer*/
|
|
||||||
|
/*Just pass it to the upper layer*/
|
||||||
NetReceive(&pbuf[nrx*2000], plen[nrx]);
|
NetReceive(&pbuf[nrx*2000], plen[nrx]);
|
||||||
/*eth_rx() was gutted, so this is not needed anymore*/
|
|
||||||
#if 0
|
|
||||||
nrx++;
|
|
||||||
#endif
|
|
||||||
}
|
}
|
||||||
|
|
||||||
void uboot_push_tx_done(int key, int val) {
|
void uboot_push_tx_done(int key, int val) {
|
||||||
|
@ -949,5 +944,4 @@ int eth_send(volatile void *packet, int length) {
|
||||||
}
|
}
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
Loading…
Reference in New Issue