phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Minor coding style cleanup; update CHANGELOG 

Signed-off-by: Wolfgang Denk <wd@denx.de>
This commit is contained in:
Wolfgang Denk 2007-10-21 01:01:17 +02:00
parent ff285ca07e
commit 05bf4919c1
3 changed files with 259 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

248
CHANGELOG
View File

@ -1,3 +1,206 @@
commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
Author: Vlad Lungu <vlad@comsys.ro>
Date: Thu Oct 4 20:47:10 2007 +0300
Fix NE2000 driver:
Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
to do anything in eth_stop() if eth_init() was not called.
Simplified RX path in order to avoid timeouts on really really
fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
clever enough to cope with 1 packet per eth_rx().
Signed-off-by: Vlad Lungu <vlad@comsys.ro>
commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
Author: Detlev Zundel <dzu@denx.de>
Date: Fri Oct 19 16:47:26 2007 +0200
Fix two typos.
Signed-off-by: Detlev Zundel <dzu@denx.de>
commit 281df457c1aa50d2752165d0c5c3282d4027b974
Author: Tony Li <tony.li@freescale.com>
Date: Thu Oct 18 17:47:19 2007 +0800
mpc83xx: Add configure entry for MPC83xx ATM support
Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
Makfile and MAKEALL
Signed-off-by: Tony Li <tony.li@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
commit d2646554f529a9577515eceb0ec5eceee18244ba
Author: Tony Li <tony.li@freescale.com>
Date: Thu Oct 18 17:44:38 2007 +0800
mpc83xx: pq-mds-pib.c typo error
Correct to val8 from val.
Signed-off-by: Tony Li <tony.li@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
commit 3e11ae80fec1ee12194940955431186abf6009c2
Author: Stefan Roese <sr@denx.de>
Date: Wed Oct 17 15:40:19 2007 +0200
ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
Signed-off-by: Stefan Roese <sr@denx.de>
commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
Author: runet@innovsys.com <runet@innovsys.com>
Date: Tue Oct 16 14:50:40 2007 -0500
Make MPC8266ADS board compile again.
Signed-off-by: Runet Torgersen <runet@innovsys.com>
commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
Author: Jon Loeliger <jdl@freescale.com>
Date: Mon Aug 27 12:41:03 2007 -0500
86xx: Allow for fewer DDR slots per memory controller.
As a direct correlation exists between DDR DIMM slots
and SPD EEPROM addresses used to configure them, use
the individually defined SPD_EEPROM_ADDRESS* values to
determine if a DDR DIMM slot should have its SPD
configuration read or not.
Effectively, this now allows for 1 or 2 DIMM slots
per memory controller.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 4d4a945e189a2f384c66432316da2788a0ac1607
Author: Rodolfo Giometti <giometti@enneenne.com>
Date: Mon Oct 15 11:59:17 2007 +0200
PXA USB OHCI: "usb stop" implementation.
Some USB keys need to be switched off before loading the kernel
otherwise they can remain in an undefined status which prevents them
to be correctly recognized by the kernel.
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
commit e2e93442e558cf1500e92861f99713b2f045ea22
Author: Stefan Roese <sr@denx.de>
Date: Mon Oct 15 11:39:00 2007 +0200
ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
The I2C bootstrap values that can be setup via the "bootstrap" command,
were setup incorrect regarding the generation of the internal sync PCI
clock. The values for PLB clock == 133MHz were slighly incorrect and the
values for PLB clock == 166MHz were totally incorrect. This could
lead to a hangup upon booting while PCI configuration scan.
This patch fixes this issue and configures valid PCI divisor values
for the sync PCI clock, with respect to the provided external async
PCI frequency.
Here the values of the formula in the chapter 14.2 "PCI clocking"
from the 440EPx users manual:
AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
33MHz async PCI frequency:
PLB = 133:
=> 32 <= 44.3 <= 65 (div = 3)
PLB = 166:
=> 32 <= 55.3 <= 65 (div = 3)
66MHz async PCI frequency:
PLB = 133:
=> 65 <= 66.5 <= 132 (div = 2)
PLB = 166:
=> 65 <= 83 <= 132 (div = 2)
Signed-off-by: Stefan Roese <sr@denx.de>
commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
Author: Stefan Roese <sr@denx.de>
Date: Mon Oct 15 11:29:33 2007 +0200
ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
The BCSR status bit for the 66MHz PCI operation was correctly
addressed (MSB/LSB problem). Now the correct currently setup
PCI frequency is displayed upon bootup.
This patch also fixes this problem on Rainier & Yellowstone, since these
boards use the same souce code as Sequoia & Yosemite do.
Signed-off-by: Stefan Roese <sr@denx.de>
commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
Author: Martin Krause <martin.krause@tqs.de>
Date: Wed Sep 26 17:55:56 2007 +0200
TQM860M: adjust for doubled flash sector size.
Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
doubled sector size.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
Author: Jens Gehrlein <jens.gehrlein@tqs.de>
Date: Wed Sep 26 17:55:54 2007 +0200
TQM8xx: Fix CAN timing.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
commit d43e489baf02afae49077791fb22332d240d8656
Author: Martin Krause <martin.krause@tqs.de>
Date: Thu Sep 27 14:54:36 2007 +0200
TQM866M: fix SDRAM refresh
At 133 MHz the current SDRAM refresh rate is too fast
(measured 4 * 1.17 us).
CFG_MAMR_PTA changes from 39 to 97. This result
in a refresh rate of 4 * 7.8 us at the default clock
50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
This is a compromise until a new method is found to
adjust the refresh rate.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
commit 9ef57bbee1c67cc01da2026c242c4692db32be36
Author: Martin Krause <martin.krause@tqs.de>
Date: Wed Sep 26 17:55:55 2007 +0200
TQM866M: adjust for doubled flash sector size.
Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
doubled sector size.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
Author: Michal Simek <monstr@monstr.eu>
Date: Sun Oct 14 16:12:29 2007 +0200
[FIX] XUPV2P change command handling
and remove code violation
commit 636400198228d96983c06657b17f760f5989958e
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Oct 14 00:13:19 2007 +0200
Prepare for 1.3.0-rc3 release
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sat Sep 29 13:41:37 2007 +0200
@ -109,6 +312,26 @@ Date: Mon Oct 1 09:51:50 2007 +0200
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
Author: Timo Ketola <timo.ketola@exertus.fi>
Date: Mon Sep 24 14:50:32 2007 +0300
Bugfix: Use only one PTD for one endpoint
Original isp116x-hcd code prepared multiple PTDs for longer than 16
byte transfers for one endpoint. That is unnecessary because the
ISP116x is able to split long data from one PTD into multiple
transactions based on the buffer size of the endpoint. It also caused
serious problems if the endpoint NAKed some of the transactions. In
that case ISP116x wouldn't notice that the other PTDs were for the same
endpoint and would try the other PTDs possibly out of order. That would
break the whole transfer.
This patch makes isp116x_submit_job to use one PTD for one transfer.
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
commit 86ec86c04326c3913178a7679aa910de071da75d
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Thu Sep 27 23:27:47 2007 +0200
@ -331,6 +554,12 @@ Date: Mon Sep 10 17:13:49 2007 +0900
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
Author: Michal Simek <monstr@monstr.eu>
Date: Sun Sep 16 20:51:57 2007 +0200
[FIX] remove files form repository
commit 67c31036acaaaa992fc346cc89db0909a7e733c4
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Sep 16 17:10:04 2007 +0200
@ -478,6 +707,25 @@ Date: Sat Sep 15 11:55:42 2007 +0200
[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
Author: Michal Simek <monstr@monstr.eu>
Date: Sat Sep 15 00:03:35 2007 +0200
Synchronize with U-BOOT mainline
commit d7fee32b7e61fe11c64e371cde79faa4768e8350
Author: Sam Sparks <SSparks@twacs.com>
Date: Fri Sep 14 11:14:42 2007 -0600
Update MPC8349ITX*_config to place config.tmp in right place.
MPC834ITX*_config does not store config.tmp at the correct locatation,
causing MPC8349ITXGP to have the wrong TEXT_BASE.
Signed-off-by: Sam Sparks <SSparks@twacs.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Thu Sep 13 18:21:48 2007 +0200

18
Makefile
View File

@ -393,7 +393,7 @@ BC3450_config: unconfig
cpci5200_config: unconfig
@$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
hmi1001_config: unconfig
hmi1001_config: unconfig
@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
Lite5200_config \
@ -435,7 +435,7 @@ icecube_5100_config: unconfig
}
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
jupiter_config: unconfig
jupiter_config: unconfig
@$(MKCONFIG) jupiter ppc mpc5xxx jupiter
v38b_config: unconfig
@ -640,9 +640,9 @@ TQM5200_STK100_config: unconfig
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
}
@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
uc101_config: unconfig
uc101_config: unconfig
@$(MKCONFIG) uc101 ppc mpc5xxx uc101
motionpro_config: unconfig
motionpro_config: unconfig
@$(MKCONFIG) motionpro ppc mpc5xxx motionpro
@ -930,7 +930,7 @@ RPXlite_DW_NVRAM_config \
RPXlite_DW_NVRAM_64_config \
RPXlite_DW_NVRAM_LCD_config \
RPXlite_DW_NVRAM_64_LCD_config \
RPXlite_DW_config: unconfig
RPXlite_DW_config: unconfig
@mkdir -p $(obj)include
@ >$(obj)include/config.h
@[ -z "$(findstring _64,$@)" ] || \
@ -1793,7 +1793,7 @@ MPC832XEMDS_ATM_config: unconfig
echo -n "...ATM..." ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
fi ;
@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
MPC8349EMDS_config: unconfig
@ -2001,13 +2001,13 @@ AmigaOneG3SE_config: unconfig
BAB7xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
CPCI750_config: unconfig
CPCI750_config: unconfig
@$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
DB64360_config: unconfig
DB64360_config: unconfig
@$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
DB64460_config: unconfig
DB64460_config: unconfig
@$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
ELPPC_config: unconfig

10
drivers/ne2000.c
View File

@ -745,14 +745,12 @@ static void pcnet_reset_8390(void)
PRINTK("nic base is %lx\n", nic_base);
#if 1
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
#endif
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
@ -847,12 +845,9 @@ void uboot_push_packet_len(int len) {
}
plen[nrx] = len;
dp83902a_recv(&pbuf[nrx*2000], len);
/*Just pass it to the upper layer*/
/*Just pass it to the upper layer*/
NetReceive(&pbuf[nrx*2000], plen[nrx]);
/*eth_rx() was gutted, so this is not needed anymore*/
#if 0
nrx++;
#endif
}
void uboot_push_tx_done(int key, int val) {
@ -949,5 +944,4 @@ int eth_send(volatile void *packet, int length) {
}
return 0;
}
#endif