virtphy uses UDP multicast to communicate with its osmo-bts-virtual
counterpart. At the momemnt SO_REUSEADDR is not applied for those
multicast connections because OSMO_SOCK_F_UDP_REUSEADDR is not set. This
makes prevents the proper function of UDP multicast.
- Make sure OSMO_SOCK_F_UDP_REUSEADDR is set
Change-Id: Ia1014ac5e0522e77178249cdc6398dec2168bffe
Depends: libosmocore I1399a428467ca12f1564a14eb8ffb294d4f59874
Related: OS#3497
osmocon.c: In function ‘read_file’:
osmocon.c:317:3: warning: ‘fd’ may be used uninitialized in this function
Change-Id: If07c58d5b55c18c05345607064eace02748935f8
Use osmo_clock_gettime() to read the monotonic clock instead
of gettimeofday() which could drift backwards.
This requires switching the scheduler clock from struct timeval
to struct timespec. Expand some variables to 64 bits in order
to keep types used in calculations compatible.
The previous implementation unconditionally subtracted microsecond
values from different time measurements, causing overflow if the
current measurement was taken in less of a fraction of a second
than the past measurement. Use timespecsub() for the subtraction
instead which accounts for fractions of a second correctly.
Change-Id: Ic93f90685c6d6dc28dfc4ad48c998e0eac113cf8
Related: OS#3467
This field of the logical channel state structure was not used at
all as there is nothing related to A-bis / RSL in trxcon itself.
Change-Id: Iec1abf777a74cf57deadafa95e2337cba5d02842
When relying on GSM 04.08 channel mode (GSM48_CMODE_*), one should
distinguish between Bm (full rate) and Lm (half rate) channels.
This change prevents the scheduler from generating TCH/F BFI
instead of TCH/H BFI on the corresponding channels.
Change-Id: I4547aa7f6d38637692fef8a0122e85fb52039a46
Instead of passing the information about a logical channel, it
makes sense to pass the pointer to its state where everything
is stored. This approach would allow to avoid adding more
arguments every time, e.g. in case of AMR.
Change-Id: I91fe86fef43aac68776a58c9acc37ef2a9ee8042
Initially it was assumed that FACCH prioritization should be done
in the same way for both TCH/F and TCH/H. Moreover, it was not
possible to confirm this, because TCH/H was (and still) not
implemented yet. But according to the specs:
- unlike FACCH/F, FACCH/H transmissions shall be aligned
within a multiframe, i.e. can only be initiated on
particular frame numbers (see GSM 05.02, clause 7);
- unlike FACCH/F, a FACCH/H frame steals two TCH/F frames;
so the TCH/H (including FACCH/H) primitives should be handled
separately from the TCH/F (including FACCH/F) primitives.
Change-Id: I9b59f60e1cbac8fb8fd557b6c67b5e376c0a6bbb
The previous primitive dequeuing logic (especially for TCH/F
channels) was a bit complicated, and it could not be possible
to reuse the existing code parts in the upcoming implementation
of both TCH/H and FACCH/H channels without changing anything.
In particular, this change introduces two internal functions:
- prim_dequeue_one(), which merely dequeues a primitive
of a given channel type (e.g. TRXC_SDCCH4_0);
- prim_dequeue_tch(), which dequeues either a FACCH,
or a speech TCH primitive of a given channel
type (Lm or Bm).
So the logic of the TCH/F prim dequeuing function has become
cleaner, and the upcoming TCH/H prim dequeuing function, where
FACCH/H prioritization is more complex than FACCH/F, will
reuse the introduced functions.
Change-Id: Ib82ad2480ab1bc6b1df9576eb2bf5acbd398bf66
settings.c: In function ‘gsm_random_imei’:
settings.c:188:26: warning: ‘sprintf’ may write a terminating nul past the end of the destination [-Wformat-overflow=]
sprintf(rand + 8, "%07ld", random() % 10000000);
^
settings.c:188:2: note: ‘sprintf’ output between 8 and 9 bytes into a destination of size 8
sprintf(rand + 8, "%07ld", random() % 10000000);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Change-Id: Id949487111235cd4af5ff068f1dce2f4b0801480
settings.c:191:2: warning: ‘strncpy’ output may be truncated copying 15 bytes from a string of length 15 -Wstringop-truncation]
strncpy(set->imeisv, set->imei, 15);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CC subscriber.o
CC support.o
CC transaction.o
CC vty_interface.o
CC voice.o
CC mncc_sock.o
CC primitives.o
mncc_sock.c: In function ‘osmo_unixsock_listen’:
mncc_sock.c:318:2: warning: ‘strncpy’ specified bound 108 equals destination size [-Wstringop-truncation]
strncpy(local.sun_path, path, sizeof(local.sun_path));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CC script_lua.o
vty_interface.c: In function ‘cfg_gps_device’:
vty_interface.c:1144:2: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
strncpy(g.device, argv[0], sizeof(g.device));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
AR libmobile.a
Change-Id: Id52978f3bf7a8abea62237d7c32f8f87e1bb34a1
gsm322.c:366:22: warning: ‘sprintf’ may write a terminating nul past the end of the destination [-Wformat-overflow=]
sprintf(string, "-%d", 110 - rxlev);
^
gsm322.c:366:2: note: ‘sprintf’ output between 3 and 6 bytes into a destination of size 5
sprintf(string, "-%d", 110 - rxlev);
Change-Id: I7b19fef89ba0cb0c1edbdd62c46ad8395e44145b
We use this in the network-side Osmocom projects (CNI) and it's
useful to have the same flags also for the OsmocomBB host software.
Change-Id: I45800c937d665fdbd2dd6b0cee38408f587f1a9f
This change introduces a couple of new CTRL commands for path loss
simulation, in particular a possibility to drop some amount of
bursts according to some TDMA frame period, separately for both
Uplink and Downlink directions.
Examples:
FAKE_DROP 4 - drop 4 consistent (period=1) bursts,
FAKE_DROP 16 2 - drop 16 even bursts (period=2).
Change-Id: Ib210138a03e2377c79875a4ff2f2bb58a43cfa46
Related: OS#3428
This change separates burst preprocessing (i.e. both RSSI and ToA
calculation) from BurstForwarder.transform_msg() because it's not
actually related to the message transformation process.
Change-Id: Ia7ad970593f38d9a9401975eb6dae67cd0c94e11
We used to trust (and still doing this) the messages coming from
L1CTL interface too much, and not to check the primitive length
before passing the payload to the libosmocoding API. As was
discovered and described in OS#3415, sending a L1CTL message
(either DATA_REQ, or TRAFFIC_REQ) with an incorrect length
(lower than expected) may cause heap overflow.
Let's explicitly check a primitive before encoding, and drop it
if its length doesn't match the expected value(s).
Change-Id: I258ee9f6d0124b183b1db23a73f1e523fcea89a8
Fixes: OS#3415
When starting multiple mobile in the same second, the libc random number
generator will be seeded to exactly the same value.
The random bits inside the RACH request(s) will be exactly the same
across multiple mobile and when the channel fails they all pick the same
randomized back-off timing.
Use stronger random numbers and replace all calls to random(2) with
osmo_get_rand_id. Add a fallback to try random().
[v2: Add helper to make sure the result is int and between 0 and
RAND_MAX]
Change-Id: Icdd4be88c62bba1e9d954568e48f0c12a67ac182
The Scapy itself was the actual cause of continuously growing
memory consumption. It was configured to store the captured
packets, what isn't required for this tool.
Change-Id: I0c6d9b76398e148b7febd94aa37aa2fa22d19b3f
It was decided to migrate to osmo_get_rand_id() and use random()
as a fall-back. But there is a critical difference between both
functions: osmo_get_rand_id() fills an input buffer with random
bytes (0x00 - 0xff), while *random() returns a value in range
between 0 and RAND_MAX.
osmo_get_rand_id() was used in a wrong way, so in some cases we
could get a negative value (how about IMEI starting from '-'?),
what isn't expected in many cases and could lead to unexpected
behaviour and segmentation faults...
This reverts commit 6d49b049ee.
Change-Id: I7b2a8a5c63cf64360a824926a2219fd7e419b1bb
Currently Access Burst generated by trxcon
has 8 zero bits at the beginning. According to
the 3GPP 05.02 specification (Chapter 5.2.7
Access burst) custom 8-bit extended tail bits
sequence should be used:
(BN0, BN1, BN2 ... BN7) = (0,0,1,1,1,0,1,0)
After this fix trxcon sets correct 8-bit
sequence at the front of Access burst.
Change-Id: I1f624e783de6c585d2e292965c9e5810b0a4f27d
When starting multiple mobile in the same second, the libc random number
generator will be seeded to exactly the same value.
The random bits inside the RACH request(s) will be exactly the same
across multiple mobile and when the channel fails they all pick the same
randomized back-off timing.
Use stronger random numbers and replace all calls to random(2) with
osmo_get_rand_id. Add a fallback to try random().
Change-Id: Ie0cc64663cd4b90c027b79545dc5d3ac9d87b9dd
Unfortunately current code architecture doesn't support a return path
with an error so tell the caller of L1CTL on the other side that
something's wrong.
Change-Id: Ib9b622dd5c9770c5e97fa58deee124a409544d3b
This can be useful to have bidirectional communication between the
mobile lua script an external control script.
Change-Id: Ib4a5eef611f524f5d21cb6a7f4eace22b8ba60d0
Variables are not removed as they document the commands of the
propietary romloader.
Let's mark them as unused to avoid compilation warnings.
Change-Id: If4c6814ada85956975e687eb43dcfd4ad70b8b94
It disables undesirable signals such as SIGPIPE, which exits the program
if the client connected to osmocon closes the connection and osmocon
writes to the connection fd. After SIGPIPE is disabled, write returns
-EPIPE.
This is required to keep osmocon running for BTS_Tests.ttcn TTCN3 tests.
Change-Id: Id664ca0fadd3a8b3cf4b78bb868b3d78d2354544
Some time ago a broken fix was committed which
then has been reverted again in commit
1724003737.
The purpose of this line is to clear the uplink
flag from the ARFCN. So far this worked because
both gsm_arfcn2band() and gsm_arfcn2freq10()
already do this internally.
Change-Id: Ie8a05ffc0ddec53d7fd6a25e03ea285fb216df29
Signed-off-by: Steve Markgraf <steve@steve-m.de>
Disable storing the SMS on disk. This is useful when scripting mobile.
Keep the default of attempting to store it to disk.
Change-Id: I6353447343d98ebaa5e12ab63f995750f81c8500
It seems the original code didn't allocate \0 for the string. Just use
talloc_asprintf and get a new string...
Change-Id: I8ffb50b04d2d6196caf0231711f3467abc8c5ea5
When no cell was found during the PLMN search the camp on any cell
state will be entered. LUs are prevented in this state and it will be
left after the start_any_timer has timedout. Even if camping on the
home network the state will not be left before the expiry of the timer.
For systematic tests this is producing a too high upper bound. Make it
configurable so we can succeed with a UL more quickly.
Change-Id: I25bc985cd4360d5e37d05a7b16b39eefb75ce20f
GSMTAP support is already merged to the mainline, while the status
of SMSCB support is unknown. In any case, OsmocomBB is not a good
place for storing the patches for Wireshark, so let's remove them.
Change-Id: I448dc5a3dba3ecc6fc041861239dc23cca72b70b
Both removed headers are not used anywhere, and probably left
from the time when there was no libosmocore as a shared library.
Change-Id: I821e2958e07176c1031c636019dffd1cee62bb10
The main problem here is that the existing implementatin missing the L1
header in this message. A SACCH message doesn't have a 23byte LAPDm
message, but only a 21 byte LAPDm message prefixed by a 2-byte Layer1
header. So on the receiver in the BTS, right now the first two bytes of
the UL SACCH frame are misinterpreted as L1 header.
This it what causes RLL ERROR INDICATION on the Abis side, which is why
our BTS_Tests fail.
Change-Id: Id7776bf3604d0e8a32e04547e01b8bd377903272
Related: OS#3170
In order to be able to introspect not only the root application
context, but also all other contexts, e.g. allocated within
libosmocore or other libraries, let's enable tracking the
use of NULL contexts using the corresponding talloc API.
Change-Id: Id21cd5ee340def443f7a5d0b2b8f37f41188dd87
This is useless, and prevents us from finding potential memory
leaks at exit. Let's print talloc report instead of that.
Change-Id: Ibf04942070d654e97c3ed77d69ab19e44602758c
The osmo_init_logging() doesn't allow to specify a talloc context
for libosmocore logging subsystem, so this is why the new version
was introduced. Let's use it.
Change-Id: I06c4a1f7f839f774bc428e89cfac30132bae904d