osmocom
/
wireshark
11
0
Fork 1
Code Issues Pull Requests Projects Releases Wiki Activity
wireshark/tools/macos-setup.sh

3675 lines
130 KiB
Bash
Executable File
Raw Blame History

#!/bin/bash
# Setup development environment on macOS (tested with 10.6.8 and Xcode
# 3.2.6 and with 10.12.4 and Xcode 8.3).
#
# Copyright 2011 Michael Tuexen, Joerg Mayer, Guy Harris (see AUTHORS file)
#
# Wireshark - Network traffic analyzer
# By Gerald Combs <gerald@wireshark.org>
# Copyright 1998 Gerald Combs
#
# SPDX-License-Identifier: GPL-2.0-or-later
shopt -s extglob
#
# Get the major version of Darwin, so we can check the major macOS
# version.
#
DARWIN_MAJOR_VERSION=`uname -r | sed 's/\([0-9]*\).*/\1/'`
#
# The minimum supported version of Qt is 5.9, so the minimum supported version
# of macOS is OS X 10.10 (Yosemite), aka Darwin 14.0
if [[ $DARWIN_MAJOR_VERSION -lt 14 ]]; then
echo "This script does not support any versions of macOS before Yosemite" 1>&2
exit 1
fi
#
# Get the processor architecture of Darwin. Currently supported: arm, i386
#
DARWIN_PROCESSOR_ARCH=`uname -p`
if [ "$DARWIN_PROCESSOR_ARCH" != "arm" -a "$DARWIN_PROCESSOR_ARCH" != "i386" ]; then
echo "This script does not support this processor architecture" 1>&2
exit 1
fi
#
# Versions of packages to download and install.
#
#
# We use curl, but older versions of curl in older macOS releases can't
# handle some sites - including the xz site.
#
# If the version of curl in the system is older than 7.54.0, download
# curl and install it.
#
current_curl_version=`curl --version | sed -n 's/curl \([0-9.]*\) .*/\1/p'`
current_curl_major_version="`expr $current_curl_version : '\([0-9][0-9]*\).*'`"
current_curl_minor_version="`expr $current_curl_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
if [[ $current_curl_major_version -lt 7 ||
($current_curl_major_version -eq 7 &&
$current_curl_minor_version -lt 54) ]]; then
CURL_VERSION=${CURL_VERSION-7.60.0}
fi
#
# Some packages need xz to unpack their current source.
# XXX: tar, since macOS 10.9, can uncompress xz'ed tarballs,
# so perhaps we could get rid of this now?
#
XZ_VERSION=5.2.5
#
# Some packages need lzip to unpack their current source.
#
LZIP_VERSION=1.21
#
# The version of libPCRE on Catalina is insufficient to build glib due to
# missing UTF-8 support.
#
PCRE_VERSION=8.45
#
# CMake is required to do the build - and to build some of the
# dependencies.
#
CMAKE_VERSION=${CMAKE_VERSION-3.21.4}
#
# Ninja isn't required, as make is provided with Xcode, but it is
# claimed to build faster than make.
# Comment it out if you don't want it.
#
NINJA_VERSION=${NINJA_VERSION-1.10.2}
#
# The following libraries and tools are required even to build only TShark.
#
GETTEXT_VERSION=0.21
GLIB_VERSION=2.68.4
if [ "$GLIB_VERSION" ]; then
GLIB_MAJOR_VERSION="`expr $GLIB_VERSION : '\([0-9][0-9]*\).*'`"
GLIB_MINOR_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
GLIB_DOTDOT_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
GLIB_MAJOR_MINOR_VERSION=$GLIB_MAJOR_VERSION.$GLIB_MINOR_VERSION
GLIB_MAJOR_MINOR_DOTDOT_VERSION=$GLIB_MAJOR_VERSION.$GLIB_MINOR_VERSION.$GLIB_DOTDOT_VERSION
fi
PKG_CONFIG_VERSION=0.29.2
#
# libgpg-error is required for libgcrypt.
#
LIBGPG_ERROR_VERSION=1.39
#
# libgcrypt is required.
#
LIBGCRYPT_VERSION=1.8.7
#
# libpcre2 is required.
#
PCRE2_VERSION=10.39
#
# One or more of the following libraries are required to build Wireshark.
#
# To override the version of Qt call the script with some of the variables
# set to the new values. Setting the variable to empty will disable building
# the toolkit and will uninstall # any version previously installed by the
# script, e.g.
# "QT_VERSION=5.10.1 ./macos-setup.sh"
# will build and install with QT 5.10.1.
#
QT_VERSION=${QT_VERSION-6.2.4}
if [ "$QT_VERSION" ]; then
QT_MAJOR_VERSION="`expr $QT_VERSION : '\([0-9][0-9]*\).*'`"
QT_MINOR_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
QT_DOTDOT_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
QT_MAJOR_MINOR_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION
QT_MAJOR_MINOR_DOTDOT_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION.$QT_DOTDOT_VERSION
fi
#
# The following libraries are optional.
# Comment them out if you don't want them, but note that some of
# the optional libraries are required by other optional libraries.
#
LIBSMI_VERSION=0.4.8
GNUTLS_VERSION=3.6.15
if [ "$GNUTLS_VERSION" ]; then
#
# We'll be building GnuTLS, so we may need some additional libraries.
# We assume GnuTLS can work with Nettle; newer versions *only* use
# Nettle, not libgcrypt.
#
GNUTLS_MAJOR_VERSION="`expr $GNUTLS_VERSION : '\([0-9][0-9]*\).*'`"
GNUTLS_MINOR_VERSION="`expr $GNUTLS_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
NETTLE_VERSION=3.6
#
# And, in turn, Nettle requires GMP.
#
GMP_VERSION=6.2.1
#
# And p11-kit
P11KIT_VERSION=0.23.21
# Which requires libtasn1
LIBTASN1_VERSION=4.16.0
fi
# Use 5.2.4, not 5.3, for now; lua_bitop.c hasn't been ported to 5.3
# yet, and we need to check for compatibility issues (we'd want Lua
# scripts to work with 5.1, 5.2, and 5.3, as long as they only use Lua
# features present in all three versions)
LUA_VERSION=5.2.4
SNAPPY_VERSION=1.1.8
ZSTD_VERSION=1.4.2
LIBXML2_VERSION=2.9.9
LZ4_VERSION=1.9.2
SBC_VERSION=1.3
CARES_VERSION=1.15.0
LIBSSH_VERSION=0.9.6
# mmdbresolve
MAXMINDDB_VERSION=1.4.3
NGHTTP2_VERSION=1.46.0
NGHTTP3_VERSION=0.6.0
SPANDSP_VERSION=0.0.6
SPEEXDSP_VERSION=1.2.0
if [ "$SPANDSP_VERSION" ]; then
#
# SpanDSP depends on libtiff.
#
LIBTIFF_VERSION=3.8.1
fi
BCG729_VERSION=1.0.2
ILBC_VERSION=2.0.2
OPUS_VERSION=1.3.1
#
# Is /usr/bin/python3 a working version of Python? It may be, as it
# might be a wrapper that runs the Python 3 that's part of Xcode.
#
if /usr/bin/python3 --version >/dev/null 2>&1
then
#
# Yes - don't bother installing Python 3 from elsewhere
#
:
else
#
# No - install a Python package.
#
PYTHON3_VERSION=3.9.5
fi
BROTLI_VERSION=1.0.9
# minizip
ZLIB_VERSION=1.2.11
# Uncomment to enable automatic updates using Sparkle
#SPARKLE_VERSION=2.1.0
#
# Asciidoctor is required to build the documentation.
#
ASCIIDOCTOR_VERSION=${ASCIIDOCTOR_VERSION-2.0.16}
ASCIIDOCTORPDF_VERSION=${ASCIIDOCTORPDF_VERSION-1.6.1}
#
# GNU autotools. They're not supplied with the macOS versions we
# support, and we currently use them for minizip.
#
AUTOCONF_VERSION=2.71
AUTOMAKE_VERSION=1.16.5
LIBTOOL_VERSION=2.4.6
install_curl() {
if [ "$CURL_VERSION" -a ! -f curl-$CURL_VERSION-done ] ; then
echo "Downloading, building, and installing curl:"
[ -f curl-$CURL_VERSION.tar.bz2 ] || curl -L -O https://curl.haxx.se/download/curl-$CURL_VERSION.tar.bz2 || exit 1
$no_build && echo "Skipping installation" && return
bzcat curl-$CURL_VERSION.tar.bz2 | tar xf - || exit 1
cd curl-$CURL_VERSION
./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch curl-$CURL_VERSION-done
fi
}
uninstall_curl() {
if [ ! -z "$installed_curl_version" ] ; then
echo "Uninstalling curl:"
cd curl-$installed_curl_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm curl-$installed_curl_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf curl-$installed_curl_version
rm -rf curl-$installed_curl_version.tar.bz2
fi
installed_curl_version=""
fi
}
install_xz() {
if [ "$XZ_VERSION" -a ! -f xz-$XZ_VERSION-done ] ; then
echo "Downloading, building, and installing xz:"
[ -f xz-$XZ_VERSION.tar.bz2 ] || curl -L -O https://tukaani.org/xz/xz-$XZ_VERSION.tar.bz2 || exit 1
$no_build && echo "Skipping installation" && return
bzcat xz-$XZ_VERSION.tar.bz2 | tar xf - || exit 1
cd xz-$XZ_VERSION
#
# This builds and installs liblzma, which libxml2 uses, and
# Wireshark uses liblzma, so we need to build this with
# all the minimum-deployment-version and SDK stuff.
#
CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch xz-$XZ_VERSION-done
fi
}
uninstall_xz() {
if [ ! -z "$installed_xz_version" ] ; then
echo "Uninstalling xz:"
cd xz-$installed_xz_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm xz-$installed_xz_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf xz-$installed_xz_version
rm -rf xz-$installed_xz_version.tar.bz2
fi
installed_xz_version=""
fi
}
install_lzip() {
if [ "$LZIP_VERSION" -a ! -f lzip-$LZIP_VERSION-done ] ; then
echo "Downloading, building, and installing lzip:"
[ -f lzip-$LZIP_VERSION.tar.gz ] || curl -L -O https://download.savannah.gnu.org/releases/lzip/lzip-$LZIP_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat lzip-$LZIP_VERSION.tar.gz | tar xf - || exit 1
cd lzip-$LZIP_VERSION
./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch lzip-$LZIP_VERSION-done
fi
}
uninstall_lzip() {
if [ ! -z "$installed_lzip_version" ] ; then
echo "Uninstalling lzip:"
cd lzip-$installed_lzip_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm lzip-$installed_lzip_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf lzip-$installed_lzip_version
rm -rf lzip-$installed_lzip_version.tar.gz
fi
installed_lzip_version=""
fi
}
install_pcre() {
if [ "$PCRE_VERSION" -a ! -f pcre-$PCRE_VERSION-done ] ; then
echo "Downloading, building, and installing pcre:"
[ -f pcre-$PCRE_VERSION.tar.bz2 ] || curl -L -O https://sourceforge.net/projects/pcre/files/pcre/$PCRE_VERSION/pcre-$PCRE_VERSION.tar.bz2 || exit 1
$no_build && echo "Skipping installation" && return
bzcat pcre-$PCRE_VERSION.tar.bz2 | tar xf - || exit 1
cd pcre-$PCRE_VERSION
./configure --enable-unicode-properties || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch pcre-$PCRE_VERSION-done
fi
}
uninstall_pcre() {
if [ ! -z "$installed_pcre_version" ] ; then
echo "Uninstalling pcre:"
cd pcre-$installed_pcre_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm pcre-$installed_pcre_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf pcre-$installed_pcre_version
rm -rf pcre-$installed_pcre_version.tar.bz2
fi
installed_pcre_version=""
fi
}
install_pcre2() {
if [ "$PCRE2_VERSION" -a ! -f "pcre2-$PCRE2_VERSION-done" ] ; then
echo "Downloading, building, and installing pcre2:"
[ -f "pcre2-$PCRE2_VERSION.tar.bz2" ] || curl -L -O "https://github.com/PhilipHazel/pcre2/releases/download/pcre2-$PCRE2_VERSION/pcre2-10.39.tar.bz2" || exit 1
$no_build && echo "Skipping installation" && return
bzcat "pcre2-$PCRE2_VERSION.tar.bz2" | tar xf - || exit 1
cd "pcre2-$PCRE2_VERSION"
mkdir build_dir
cd build_dir
# https://github.com/Homebrew/homebrew-core/blob/master/Formula/pcre2.rb
# https://github.com/microsoft/vcpkg/blob/master/ports/pcre2/portfile.cmake
MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" \
cmake -DBUILD_STATIC_LIBS=OFF -DBUILD_SHARED_LIBS=ON -DPCRE2_SUPPORT_JIT=ON -DPCRE2_SUPPORT_UNICODE=ON .. || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ../..
touch "pcre2-$PCRE2_VERSION-done"
fi
}
uninstall_pcre2() {
if [ -n "$installed_pcre2_version" ] && [ -s "pcre2-$installed_pcre2_version/build_dir/install_manifest.txt" ] ; then
echo "Uninstalling pcre2:"
# PCRE2 10.39 installs pcre2unicode.3 twice, so this will return an error.
while read -r ; do $DO_RM -v "$REPLY" ; done < <(cat "pcre2-$installed_pcre2_version/build_dir/install_manifest.txt"; echo)
rm "pcre2-$installed_pcre2_version-done"
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf "pcre2-$installed_pcre2_version"
rm -rf "pcre2-$installed_pcre2_version.tar.bz2"
fi
installed_pcre2_version=""
fi
}
install_autoconf() {
if [ "$AUTOCONF_VERSION" -a ! -f autoconf-$AUTOCONF_VERSION-done ] ; then
echo "Downloading, building and installing GNU autoconf..."
[ -f autoconf-$AUTOCONF_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/autoconf/autoconf-$AUTOCONF_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat autoconf-$AUTOCONF_VERSION.tar.xz | tar xf - || exit 1
cd autoconf-$AUTOCONF_VERSION
./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch autoconf-$AUTOCONF_VERSION-done
fi
}
uninstall_autoconf() {
if [ ! -z "$installed_autoconf_version" ] ; then
#
# automake and libtool depend on this, so uninstall them.
#
uninstall_libtool "$@"
uninstall_automake "$@"
echo "Uninstalling GNU autoconf:"
cd autoconf-$installed_autoconf_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm autoconf-$installed_autoconf_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf autoconf-$installed_autoconf_version
rm -rf autoconf-$installed_autoconf_version.tar.xz
fi
installed_autoconf_version=""
fi
}
install_automake() {
if [ "$AUTOMAKE_VERSION" -a ! -f automake-$AUTOMAKE_VERSION-done ] ; then
echo "Downloading, building and installing GNU automake..."
[ -f automake-$AUTOMAKE_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/automake/automake-$AUTOMAKE_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat automake-$AUTOMAKE_VERSION.tar.xz | tar xf - || exit 1
cd automake-$AUTOMAKE_VERSION
./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch automake-$AUTOMAKE_VERSION-done
fi
}
uninstall_automake() {
if [ ! -z "$installed_automake_version" ] ; then
#
# libtool depends on this(?), so uninstall it.
#
uninstall_libtool "$@"
echo "Uninstalling GNU automake:"
cd automake-$installed_automake_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm automake-$installed_automake_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf automake-$installed_automake_version
rm -rf automake-$installed_automake_version.tar.xz
fi
installed_automake_version=""
fi
}
install_libtool() {
if [ "$LIBTOOL_VERSION" -a ! -f libtool-$LIBTOOL_VERSION-done ] ; then
echo "Downloading, building and installing GNU libtool..."
[ -f libtool-$LIBTOOL_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/libtool/libtool-$LIBTOOL_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat libtool-$LIBTOOL_VERSION.tar.xz | tar xf - || exit 1
cd libtool-$LIBTOOL_VERSION
./configure --program-prefix=g || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libtool-$LIBTOOL_VERSION-done
fi
}
uninstall_libtool() {
if [ ! -z "$installed_libtool_version" ] ; then
echo "Uninstalling GNU libtool:"
cd libtool-$installed_libtool_version
$DO_MV /usr/local/bin/glibtool /usr/local/bin/libtool
$DO_MV /usr/local/bin/glibtoolize /usr/local/bin/libtoolize
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libtool-$installed_libtool_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libtool-$installed_libtool_version
rm -rf libtool-$installed_libtool_version.tar.xz
fi
installed_libtool_version=""
fi
}
install_ninja() {
if [ "$NINJA_VERSION" -a ! -f ninja-$NINJA_VERSION-done ] ; then
echo "Downloading and installing Ninja:"
#
# Download the zipball, unpack it, and move the binary to
# /usr/local/bin.
#
[ -f ninja-mac-v$NINJA_VERSION.zip ] || curl -L -o ninja-mac-v$NINJA_VERSION.zip https://github.com/ninja-build/ninja/releases/download/v$NINJA_VERSION/ninja-mac.zip || exit 1
$no_build && echo "Skipping installation" && return
unzip ninja-mac-v$NINJA_VERSION.zip
sudo mv ninja /usr/local/bin
touch ninja-$NINJA_VERSION-done
fi
}
uninstall_ninja() {
if [ ! -z "$installed_ninja_version" ]; then
echo "Uninstalling Ninja:"
sudo rm /usr/local/bin/ninja
rm ninja-$installed_ninja_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
rm -f ninja-mac-v$installed_ninja_version.zip
fi
installed_ninja_version=""
fi
}
install_asciidoctor() {
if [ ! -f asciidoctor-${ASCIIDOCTOR_VERSION}-done ]; then
echo "Downloading and installing Asciidoctor:"
sudo gem install -V asciidoctor --version "=${ASCIIDOCTOR_VERSION}"
touch asciidoctor-${ASCIIDOCTOR_VERSION}-done
fi
}
uninstall_asciidoctor() {
if [ ! -z "$installed_asciidoctor_version" ]; then
echo "Uninstalling Asciidoctor:"
sudo gem uninstall -V asciidoctor --version "=${installed_asciidoctor_version}"
rm asciidoctor-$installed_asciidoctor_version-done
##if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version,
# whatever it might happen to be called.
#
## rm -f asciidoctor-$installed_asciidoctor_version
##fi
installed_asciidoctor_version=""
fi
}
install_asciidoctorpdf() {
if [ ! -f asciidoctorpdf-${ASCIIDOCTORPDF_VERSION}-done ]; then
## XXX gem does not track dependencies that are installed for asciidoctor-pdf
## record them for uninstallation
## ttfunk, pdf-core, prawn, prawn-table, Ascii85, ruby-rc4, hashery, afm, pdf-reader, prawn-templates, public_suffix, addressable, css_parser, prawn-svg, prawn-icon, safe_yaml, thread_safe, polyglot, treetop, asciidoctor-pdf
echo "Downloading and installing Asciidoctor-pdf:"
sudo gem install -V asciidoctor-pdf --version "=${ASCIIDOCTORPDF_VERSION}"
touch asciidoctorpdf-${ASCIIDOCTORPDF_VERSION}-done
fi
}
uninstall_asciidoctorpdf() {
if [ ! -z "$installed_asciidoctorpdf_version" ]; then
echo "Uninstalling Asciidoctor:"
sudo gem uninstall -V asciidoctor-pdf --version "=${installed_asciidoctorpdf_version}"
## XXX uninstall dependencies
rm asciidoctorpdf-$installed_asciidoctorpdf_version-done
##if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version,
# whatever it might happen to be called.
#
## rm -f asciidoctorpdf-$installed_asciidoctorpdf_version
##fi
installed_asciidoctorpdf_version=""
fi
}
install_cmake() {
if [ ! -f cmake-$CMAKE_VERSION-done ]; then
echo "Downloading and installing CMake:"
CMAKE_MAJOR_VERSION="`expr $CMAKE_VERSION : '\([0-9][0-9]*\).*'`"
CMAKE_MINOR_VERSION="`expr $CMAKE_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
CMAKE_MAJOR_MINOR_VERSION=$CMAKE_MAJOR_VERSION.$CMAKE_MINOR_VERSION
#
# NOTE: the "64" in "Darwin64" doesn't mean "64-bit-only"; the
# package in question supports both 32-bit and 64-bit x86.
#
case "$CMAKE_MAJOR_VERSION" in
0|1|2)
echo "CMake $CMAKE_VERSION" is too old 1>&2
;;
3)
#
# Download the DMG and do a drag install, where "drag" means
# "mv".
#
# 3.1.1 to 3.19.1 have a Darwin-x86_64 DMG.
# 3.19.2 has a macos-universal DMG for 10.10 and later
# 3.19.3 and later have a macos-universal DMG for 10.13 and later,
# and a macos10.10-universal DMG for 10.10 and later.
#
if [ "$CMAKE_MINOR_VERSION" -lt 5 ]; then
echo "CMake $CMAKE_VERSION" is too old 1>&2
elif [ "$CMAKE_MINOR_VERSION" -lt 19 -o \
"$CMAKE_VERSION" = 3.19.0 -o \
"$CMAKE_VERSION" = 3.19.1 ]; then
type="Darwin-x86_64"
elif [ "$CMAKE_VERSION" = 3.19.2 -o \
"$DARWIN_MAJOR_VERSION" -ge 17 ]; then
type="macos-universal"
else
type="macos10.0-universal"
fi
[ -f cmake-$CMAKE_VERSION-$type.dmg ] || curl -L -O https://cmake.org/files/v$CMAKE_MAJOR_MINOR_VERSION/cmake-$CMAKE_VERSION-$type.dmg || exit 1
$no_build && echo "Skipping installation" && return
sudo hdiutil attach cmake-$CMAKE_VERSION-$type.dmg || exit 1
sudo ditto /Volumes/cmake-$CMAKE_VERSION-$type/CMake.app /Applications/CMake.app || exit 1
#
# Plant the appropriate symbolic links in /usr/local/bin.
# It's a drag-install, so there's no installer to make them,
# and the CMake code to put them in place is lame, as
#
# 1) it defaults to /usr/bin, not /usr/local/bin;
# 2) it doesn't request the necessary root privileges;
# 3) it can't be run from the command line;
#
# so we do it ourselves.
#
for i in ccmake cmake cmake-gui cmakexbuild cpack ctest
do
sudo ln -s /Applications/CMake.app/Contents/bin/$i /usr/local/bin/$i
done
sudo hdiutil detach /Volumes/cmake-$CMAKE_VERSION-$type
;;
*)
;;
esac
touch cmake-$CMAKE_VERSION-done
fi
}
uninstall_cmake() {
if [ ! -z "$installed_cmake_version" ]; then
echo "Uninstalling CMake:"
installed_cmake_major_version="`expr $installed_cmake_version : '\([0-9][0-9]*\).*'`"
case "$installed_cmake_major_version" in
0|1|2)
echo "CMake $installed_cmake_version" is too old 1>&2
;;
3)
sudo rm -rf /Applications/CMake.app
for i in ccmake cmake cmake-gui cmakexbuild cpack ctest
do
sudo rm -f /usr/local/bin/$i
done
rm cmake-$installed_cmake_version-done
;;
esac
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version,
# whatever it might happen to be called.
#
rm -f cmake-$installed_cmake_version-Darwin-x86_64.dmg
rm -f cmake-$installed_cmake_version-macos-universal.dmg
rm -f cmake-$installed_cmake_version-macos10.0-universal.dmg
fi
installed_cmake_version=""
fi
}
install_meson() {
#
# Install Meson with pip3 if we don't have it already.
#
if $MESON --version >/dev/null 2>&1
then
# We have it.
:
else
sudo pip3 install meson
touch meson-done
fi
}
uninstall_meson() {
#
# If we installed Meson, uninstal it with pip3.
#
if [ -f meson-done ] ; then
sudo pip3 uninstall meson
rm -f meson-done
fi
}
install_pytest() {
#
# Install pytest with pip3 if we don't have it already.
#
if python3 -m pytest --version >/dev/null 2>&1
then
# We have it.
:
else
sudo pip3 install pytest pytest-xdist
touch pytest-done
fi
}
uninstall_pytest() {
#
# If we installed pytest, uninstal it with pip3.
#
if [ -f pytest-done ] ; then
sudo pip3 uninstall pytest pytest-xdist
rm -f pytest-done
fi
}
install_gettext() {
if [ ! -f gettext-$GETTEXT_VERSION-done ] ; then
echo "Downloading, building, and installing GNU gettext:"
[ -f gettext-$GETTEXT_VERSION.tar.gz ] || curl -L -O https://ftp.gnu.org/pub/gnu/gettext/gettext-$GETTEXT_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat gettext-$GETTEXT_VERSION.tar.gz | tar xf - || exit 1
cd gettext-$GETTEXT_VERSION
CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch gettext-$GETTEXT_VERSION-done
fi
}
uninstall_gettext() {
if [ ! -z "$installed_gettext_version" ] ; then
#
# GLib depends on this, so uninstall it.
#
uninstall_glib "$@"
echo "Uninstalling GNU gettext:"
cd gettext-$installed_gettext_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm gettext-$installed_gettext_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf gettext-$installed_gettext_version
rm -rf gettext-$installed_gettext_version.tar.gz
fi
installed_gettext_version=""
fi
}
install_pkg_config() {
if [ ! -f pkg-config-$PKG_CONFIG_VERSION-done ] ; then
echo "Downloading, building, and installing pkg-config:"
[ -f pkg-config-$PKG_CONFIG_VERSION.tar.gz ] || curl -L -O https://pkgconfig.freedesktop.org/releases/pkg-config-$PKG_CONFIG_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat pkg-config-$PKG_CONFIG_VERSION.tar.gz | tar xf - || exit 1
cd pkg-config-$PKG_CONFIG_VERSION
./configure --with-internal-glib || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch pkg-config-$PKG_CONFIG_VERSION-done
fi
}
uninstall_pkg_config() {
if [ ! -z "$installed_pkg_config_version" ] ; then
echo "Uninstalling pkg-config:"
cd pkg-config-$installed_pkg_config_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm pkg-config-$installed_pkg_config_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf pkg-config-$installed_pkg_config_version
rm -rf pkg-config-$installed_pkg_config_version.tar.gz
fi
installed_pkg_config_version=""
fi
}
install_glib() {
if [ ! -f glib-$GLIB_VERSION-done ] ; then
echo "Downloading, building, and installing GLib:"
glib_dir=`expr $GLIB_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
#
# Starting with GLib 2.28.8, xz-compressed tarballs are available.
#
[ -f glib-$GLIB_VERSION.tar.xz ] || curl -L -O https://download.gnome.org/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat glib-$GLIB_VERSION.tar.xz | tar xf - || exit 1
cd glib-$GLIB_VERSION
#
# First, determine where the system include files are.
# (It's not necessarily /usr/include.) There's a bit of a
# greasy hack here; pre-5.x versions of the developer tools
# don't support the --show-sdk-path option, and will produce
# no output, so includedir will be set to /usr/include
# (in those older versions of the developer tools, there is
# a /usr/include directory).
#
# We need this for several things we do later.
#
includedir=`SDKROOT="$SDKPATH" xcrun --show-sdk-path 2>/dev/null`/usr/include
#
# GLib's configuration procedure, whether autotools-based or
# Meson-based, really likes to use pkg-config to find libraries,
# including libffi.
#
# At least some versions of macOS provide libffi, but, as macOS
# doesn't provide pkg-config, they don't provide a .pc file for
# it, so the autotools-based configuration needs some trickery
# to get it to find the OS-supplied libffi, and the Meson-based
# configuration simply won't find it at all.
#
# So, if we have a system-provided libffi, but pkg-config
# doesn't find libffi, we construct a .pc file for that libffi,
# and install it in /usr/local/lib/pkgconfig.
#
if pkg-config libffi ; then
# It found libffi; no need to install a .pc file, and we
# don't want to overwrite what's there already.
:
elif [ ! -e $includedir/ffi/ffi.h ] ; then
# We don't appear to have libffi as part of the system, so
# let the configuration process figure out what to do.
#
# We test for the header file, not the library, because, in
# Big Sur and later, there's no guarantee that, for a system
# shared library, there's a corresponding dylib file in
# /usr/lib.
:
else
#
# We have libffi, but pkg-config didn't find it; generate
# and install the .pc file.
#
#
# Now generate the .pc file.
#
# We generate the contents of the .pc file by using cat with
# a here document containing a template for the file and
# piping that to a sed command that replaces @INCLUDEDIR@ in
# the template with the include directory we discovered
# above, so that the .pc file gives the compiler flags
# necessary to find the libffi headers (which are *not*
# necessarily in /usr/include, as per the above).
#
# The EOF marker for the here document is in quotes, to tell
# the shell not to do shell expansion, as .pc files use a
# syntax to refer to .pc file variables that looks like the
# syntax to refer to shell variables.
#
# The writing of the libffi.pc file is a greasy hack - the
# process of generating the contents of the .pc file writes
# to the standard output, but running the last process in
# the pipeline as root won't allow the shell that's
# *running* it to open the .pc file if we don't have write
# permission on /usr/local/lib/pkgconfig, so we need a
# program that creates a file and then reads from the
# standard input and writes to that file. UN*Xes have a
# program that does that; it's called "tee". :-)
#
# However, it *also* writes the file to the standard output,
# so we redirect that to /dev/null when we run it.
#
cat <<"EOF" | sed "s;@INCLUDEDIR@;$includedir;" | $DO_TEE_TO_PC_FILE /usr/local/lib/pkgconfig/libffi.pc >/dev/null
prefix=/usr
libdir=${prefix}/lib
includedir=@INCLUDEDIR@
Name: ffi
Description: Library supporting Foreign Function Interfaces
Version: 3.2.9999
Libs: -L${libdir} -lffi
Cflags: -I${includedir}/ffi
EOF
fi
#
# GLib 2.59.1 and later use Meson+Ninja as the build system.
#
case $GLIB_MAJOR_VERSION in
1)
echo "GLib $GLIB_VERSION" is too old 1>&2
;;
*)
case $GLIB_MINOR_VERSION in
[0-9]|1[0-9]|2[0-9]|3[0-7])
echo "GLib $GLIB_VERSION" is too old 1>&2
;;
3[8-9]|4[0-9]|5[0-8])
if [ ! -f ./configure ]; then
LIBTOOLIZE=glibtoolize ./autogen.sh
fi
#
# At least with the version of Xcode that comes with
# Leopard, /usr/include/ffi/fficonfig.h doesn't define
# MACOSX, which causes the build of GLib to fail for at
# least some versions of GLib. If we don't find
# "#define.*MACOSX" in /usr/include/ffi/fficonfig.h,
# explicitly define it.
#
# While we're at it, suppress -Wformat-nonliteral to
# avoid a case where clang's stricter rules on when not
# to complain about non-literal format arguments cause
# it to complain about code that's safe but it wasn't
# told that. See my comment #25 in GNOME bug 691608:
#
# https://bugzilla.gnome.org/show_bug.cgi?id=691608#c25
#
if grep -qs '#define.*MACOSX' $includedir/ffi/fficonfig.h
then
# It's defined, nothing to do
CFLAGS="$CFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
else
CFLAGS="$CFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
fi
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
;;
59|[6-9][0-9]|[1-9][0-9][0-9])
#
# 2.59.0 doesn't require Meson and Ninja, but it
# supports it, and I'm too lazy to add a dot-dot
# version check.
#
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" $MESON _build || exit 1
ninja $MAKE_BUILD_OPTS -C _build || exit 1
$DO_NINJA_INSTALL || exit 1
;;
*)
echo "Glib's put out 1000 2.x releases?" 1>&2
;;
esac
esac
cd ..
touch glib-$GLIB_VERSION-done
fi
}
uninstall_glib() {
if [ ! -z "$installed_glib_version" ] ; then
echo "Uninstalling GLib:"
cd glib-$installed_glib_version
installed_glib_major_version="`expr $installed_glib_version : '\([0-9][0-9]*\).*'`"
installed_glib_minor_version="`expr $installed_glib_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
installed_glib_dotdot_version="`expr $installed_glib_version : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
installed_glib_major_minor_version=$installed_glib_major_version.$installed_glib_minor_version
installed_glib_major_minor_dotdot_version=$installed_glib_major_version.$installed_glib_minor_version.$installed_glib_dotdot_version
#
# GLib 2.59.1 and later use Meson+Ninja as the build system.
#
case $installed_glib_major_version in
1)
$DO_MAKE_UNINSTALL || exit 1
#
# This appears to delete dependencies out from under other
# Makefiles in the tree, causing it to fail. At least until
# that gets fixed, if it ever gets fixed, we just ignore the
# exit status of "make distclean"
#
# make distclean || exit 1
make distclean || echo "Ignoring make distclean failure" 1>&2
;;
*)
case $installed_glib_minor_version in
[0-9]|1[0-9]|2[0-9]|3[0-9]|4[0-9]|5[0-8])
$DO_MAKE_UNINSTALL || exit 1
#
# This appears to delete dependencies out from under other
# Makefiles in the tree, causing it to fail. At least until
# that gets fixed, if it ever gets fixed, we just ignore the
# exit status of "make distclean"
#
# make distclean || exit 1
make distclean || echo "Ignoring make distclean failure" 1>&2
;;
59|[6-9][0-9]|[1-9][0-9][0-9])
#
# 2.59.0 doesn't require Meson and Ninja, but it
# supports it, and I'm too lazy to add a dot-dot
# version check.
#
$DO_NINJA_UNINSTALL || exit 1
#
# For Meson+Ninja, we do the build in an _build
# subdirectory, so the equivalent of "make distclean"
# is just to remove the directory tree.
#
rm -rf _build
;;
*)
echo "Glib's put out 1000 2.x releases?" 1>&2
;;
esac
esac
cd ..
rm glib-$installed_glib_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf glib-$installed_glib_version
rm -rf glib-$installed_glib_version.tar.xz
fi
installed_glib_version=""
fi
}
install_qt() {
if [ "$QT_VERSION" -a ! -f qt-$QT_VERSION-done ]; then
echo "Downloading and installing Qt:"
#
# What you get for this URL might just be a 302 Found reply, so use
# -L so we get redirected.
#
# 5.0 - 5.1: qt-mac-opensource-{version}-clang-offline.dmg
# 5.2.0: qt-mac-opensource-{version}.dmg
# 5.2.1: qt-opensource-mac-x64-clang-{version}.dmg
# 5.3 - 5.8: qt-opensource-mac-x64-clang-{version}.dmg
# 5.9 - 5.14: qt-opensource-mac-x64-{version}.dmg
# 5.15 - 6.0: Offline installers no longer provided.
# ( https://download.qt.io/archive/qt/5.15/5.15.0/OFFLINE_README.txt )
# XXX: We need a different approach for QT >= 5.15
#
case $QT_MAJOR_VERSION in
1|2|3|4)
echo "Qt $QT_VERSION" is too old 1>&2
;;
5)
case $QT_MINOR_VERSION in
0|1|2|3|4|5|6|7|8)
echo "Qt $QT_VERSION" is too old 1>&2
;;
9|10|11|12|13|14)
QT_VOLUME=qt-opensource-mac-x64-$QT_VERSION
;;
*)
echo "The Qt Company no longer provides open source offline installers for Qt $QT_VERSION" 1>&2
;;
esac
[ -f $QT_VOLUME.dmg ] || curl -L -O https://download.qt.io/archive/qt/$QT_MAJOR_MINOR_VERSION/$QT_MAJOR_MINOR_DOTDOT_VERSION/$QT_VOLUME.dmg || exit 1
$no_build && echo "Skipping installation" && return
sudo hdiutil attach $QT_VOLUME.dmg || exit 1
#
# Run the installer executable directly, so that we wait for
# it to finish. Then unmount the volume.
#
/Volumes/$QT_VOLUME/$QT_VOLUME.app/Contents/MacOS/$QT_VOLUME
sudo hdiutil detach /Volumes/$QT_VOLUME
touch qt-$QT_VERSION-done
;;
*)
echo "The Qt Company no longer provides open source offline installers for Qt $QT_VERSION" 1>&2
;;
esac
fi
}
uninstall_qt() {
if [ ! -z "$installed_qt_version" ] ; then
echo "Uninstalling Qt:"
rm -rf $HOME/Qt$installed_qt_version
rm qt-$installed_qt_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded version.
#
# 5.0 - 5.1: qt-mac-opensource-{version}-clang-offline.dmg
# 5.2.0: qt-mac-opensource-{version}.dmg
# 5.2.1: qt-opensource-mac-x64-clang-{version}.dmg
# 5.3 - 5.8: qt-opensource-mac-x64-clang-{version}.dmg
# 5.9 - 5.14: qt-opensource-mac-x64-{version}.dmg
#
installed_qt_major_version="`expr $installed_qt_version : '\([0-9][0-9]*\).*'`"
installed_qt_minor_version="`expr $installed_qt_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
installed_qt_dotdot_version="`expr $installed_qt_version : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
case $installed_qt_major_version in
1|2|3|4)
echo "Qt $installed_qt_version" is too old 1>&2
;;
5*)
case $installed_qt_minor_version in
0|1|2|3|4|5)
echo "Qt $installed_qt_version" is too old 1>&2
;;
6|7|8)
installed_qt_volume=qt-opensource-mac-x64-clang-$installed_qt_version.dmg
;;
9|10|11|12|13|14)
installed_qt_volume=qt-opensource-mac-x64-$installed_qt_version.dmg
;;
esac
esac
rm -f $installed_qt_volume
fi
installed_qt_version=""
fi
}
install_libsmi() {
if [ "$LIBSMI_VERSION" -a ! -f libsmi-$LIBSMI_VERSION-done ] ; then
echo "Downloading, building, and installing libsmi:"
[ -f libsmi-$LIBSMI_VERSION.tar.gz ] || curl -L -O https://www.ibr.cs.tu-bs.de/projects/libsmi/download/libsmi-$LIBSMI_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat libsmi-$LIBSMI_VERSION.tar.gz | tar xf - || exit 1
cd libsmi-$LIBSMI_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libsmi-$LIBSMI_VERSION-done
fi
}
uninstall_libsmi() {
if [ ! -z "$installed_libsmi_version" ] ; then
echo "Uninstalling libsmi:"
cd libsmi-$installed_libsmi_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libsmi-$installed_libsmi_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libsmi-$installed_libsmi_version
rm -rf libsmi-$installed_libsmi_version.tar.gz
fi
installed_libsmi_version=""
fi
}
install_libgpg_error() {
if [ "$LIBGPG_ERROR_VERSION" -a ! -f libgpg-error-$LIBGPG_ERROR_VERSION-done ] ; then
echo "Downloading, building, and installing libgpg-error:"
[ -f libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/libgpg-error/libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 || exit 1
$no_build && echo "Skipping installation" && return
bzcat libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 | tar xf - || exit 1
cd libgpg-error-$LIBGPG_ERROR_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libgpg-error-$LIBGPG_ERROR_VERSION-done
fi
}
uninstall_libgpg_error() {
if [ ! -z "$installed_libgpg_error_version" ] ; then
#
# libgcrypt depends on this, so uninstall it.
#
uninstall_libgcrypt "$@"
echo "Uninstalling libgpg-error:"
cd libgpg-error-$installed_libgpg_error_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libgpg-error-$installed_libgpg_error_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libgpg-error-$installed_libgpg_error_version
rm -rf libgpg-error-$installed_libgpg_error_version.tar.bz2
fi
installed_libgpg_error_version=""
fi
}
install_libgcrypt() {
if [ "$LIBGCRYPT_VERSION" -a ! -f libgcrypt-$LIBGCRYPT_VERSION-done ] ; then
#
# libgpg-error is required for libgcrypt.
#
if [ -z $LIBGPG_ERROR_VERSION ]
then
echo "libgcrypt requires libgpg-error, but you didn't install libgpg-error." 1>&2
exit 1
fi
echo "Downloading, building, and installing libgcrypt:"
[ -f libgcrypt-$LIBGCRYPT_VERSION.tar.gz ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-$LIBGCRYPT_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat libgcrypt-$LIBGCRYPT_VERSION.tar.gz | tar xf - || exit 1
cd libgcrypt-$LIBGCRYPT_VERSION
#
# The assembler language code is not compatible with the macOS
# x86 assembler (or is it an x86-64 vs. x86-32 issue?).
#
# libgcrypt expects gnu89, not c99/gnu99, semantics for
# "inline". See, for example:
#
# https://lists.freebsd.org/pipermail/freebsd-ports-bugs/2010-October/198809.html
#
CFLAGS="$CFLAGS -std=gnu89 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-asm || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libgcrypt-$LIBGCRYPT_VERSION-done
fi
}
uninstall_libgcrypt() {
if [ ! -z "$installed_libgcrypt_version" ] ; then
echo "Uninstalling libgcrypt:"
cd libgcrypt-$installed_libgcrypt_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libgcrypt-$installed_libgcrypt_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libgcrypt-$installed_libgcrypt_version
rm -rf libgcrypt-$installed_libgcrypt_version.tar.gz
fi
installed_libgcrypt_version=""
fi
}
install_gmp() {
if [ "$GMP_VERSION" -a ! -f gmp-$GMP_VERSION-done ] ; then
echo "Downloading, building, and installing GMP:"
[ -f gmp-$GMP_VERSION.tar.lz ] || curl -L -O https://gmplib.org/download/gmp/gmp-$GMP_VERSION.tar.lz || exit 1
$no_build && echo "Skipping installation" && return
lzip -c -d gmp-$GMP_VERSION.tar.lz | tar xf - || exit 1
cd gmp-$GMP_VERSION
# Create a fat binary: https://gmplib.org/manual/Notes-for-Package-Builds.html
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-fat || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch gmp-$GMP_VERSION-done
fi
}
uninstall_gmp() {
if [ ! -z "$installed_gmp_version" ] ; then
#
# Nettle depends on this, so uninstall it.
#
uninstall_nettle "$@"
echo "Uninstalling GMP:"
cd gmp-$installed_gmp_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm gmp-$installed_gmp_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf gmp-$installed_gmp_version
rm -rf gmp-$installed_gmp_version.tar.lz
fi
installed_gmp_version=""
fi
}
install_libtasn1() {
if [ "$LIBTASN1_VERSION" -a ! -f libtasn1-$LIBTASN1_VERSION-done ] ; then
echo "Downloading, building, and installing libtasn1:"
[ -f libtasn1-$LIBTASN1_VERSION.tar.gz ] || curl -L -O https://ftpmirror.gnu.org/libtasn1/libtasn1-$LIBTASN1_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat libtasn1-$LIBTASN1_VERSION.tar.gz | tar xf - || exit 1
cd libtasn1-$LIBTASN1_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libtasn1-$LIBTASN1_VERSION-done
fi
}
uninstall_libtasn1() {
if [ ! -z "$installed_libtasn1_version" ] ; then
#
# p11-kit depends on this, so uninstall it.
#
uninstall_p11_kit "$@"
echo "Uninstalling libtasn1:"
cd libtasn1-$installed_libtasn1_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libtasn1-$installed_libtasn1_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libtasn1-$installed_libtasn1_version
rm -rf libtasn1-$installed_libtasn1_version.tar.gz
fi
installed_libtasn1_version=""
fi
}
install_p11_kit() {
if [ "$P11KIT_VERSION" -a ! -f p11-kit-$P11KIT_VERSION-done ] ; then
echo "Downloading, building, and installing p11-kit:"
[ -f p11-kit-$P11KIT_VERSION.tar.xz ] || curl -L -O https://github.com/p11-glue/p11-kit/releases/download/$P11KIT_VERSION/p11-kit-$P11KIT_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat p11-kit-$P11KIT_VERSION.tar.xz | tar xf - || exit 1
cd p11-kit-$P11KIT_VERSION
#
# Prior to Catalina, the libffi that's supplied with macOS
# doesn't support ffi_closure_alloc() or ffi_prep_closure_loc(),
# both of which are required by p11-kit if built with libffi.
#
# According to
#
# https://p11-glue.github.io/p11-glue/p11-kit/manual/devel-building.html
#
# libffi is used "for sharing of PKCS#11 modules between
# multiple callers in the same process. It is highly recommended
# that this dependency be treated as a required dependency.",
# but it's not clear that this matters to us, so we just
# configure p11-kit not to use libffi.
#
CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libffi --without-trust-paths || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch p11-kit-$P11KIT_VERSION-done
fi
}
uninstall_p11_kit() {
if [ ! -z "$installed_p11_kit_version" ] ; then
#
# Nettle depends on this, so uninstall it.
#
uninstall_nettle "$@"
echo "Uninstalling p11-kit:"
cd p11-kit-$installed_p11_kit_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm p11-kit-$installed_p11_kit_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf p11-kit-$installed_p11_kit_version
rm -rf p11-kit-$installed_p11_kit_version.tar.xz
fi
installed_p11_kit_version=""
fi
}
install_nettle() {
if [ "$NETTLE_VERSION" -a ! -f nettle-$NETTLE_VERSION-done ] ; then
echo "Downloading, building, and installing Nettle:"
[ -f nettle-$NETTLE_VERSION.tar.gz ] || curl -L -O https://ftp.gnu.org/gnu/nettle/nettle-$NETTLE_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat nettle-$NETTLE_VERSION.tar.gz | tar xf - || exit 1
cd nettle-$NETTLE_VERSION
if [ "$DARWIN_PROCESSOR_ARCH" = "arm" ] ; then
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-assembler || exit 1
else
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
fi
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch nettle-$NETTLE_VERSION-done
fi
}
uninstall_nettle() {
if [ ! -z "$installed_nettle_version" ] ; then
#
# GnuTLS depends on this, so uninstall it.
#
uninstall_gnutls "$@"
echo "Uninstalling Nettle:"
cd nettle-$installed_nettle_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm nettle-$installed_nettle_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf nettle-$installed_nettle_version
rm -rf nettle-$installed_nettle_version.tar.gz
fi
installed_nettle_version=""
fi
}
install_gnutls() {
if [ "$GNUTLS_VERSION" -a ! -f gnutls-$GNUTLS_VERSION-done ] ; then
#
# GnuTLS requires Nettle.
#
if [ -z $NETTLE_VERSION ]
then
echo "GnuTLS requires Nettle, but you didn't install Nettle" 1>&2
exit 1
fi
echo "Downloading, building, and installing GnuTLS:"
if [[ $GNUTLS_MAJOR_VERSION -ge 3 ]]
then
#
# Starting with GnuTLS 3.x, the tarballs are compressed with
# xz rather than bzip2.
#
[ -f gnutls-$GNUTLS_VERSION.tar.xz ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/gnutls/v$GNUTLS_MAJOR_VERSION.$GNUTLS_MINOR_VERSION/gnutls-$GNUTLS_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat gnutls-$GNUTLS_VERSION.tar.xz | tar xf - || exit 1
else
[ -f gnutls-$GNUTLS_VERSION.tar.bz2 ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/gnutls/v$GNUTLS_MAJOR_VERSION.$GNUTLS_MINOR_VERSION/gnutls-$GNUTLS_VERSION.tar.bz2 || exit 1
$no_build && echo "Skipping installation" && return
bzcat gnutls-$GNUTLS_VERSION.tar.bz2 | tar xf - || exit 1
fi
cd gnutls-$GNUTLS_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --with-included-unistring --disable-guile || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch gnutls-$GNUTLS_VERSION-done
fi
}
uninstall_gnutls() {
if [ ! -z "$installed_gnutls_version" ] ; then
echo "Uninstalling GnuTLS:"
cd gnutls-$installed_gnutls_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm gnutls-$installed_gnutls_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf gnutls-$installed_gnutls_version
rm -rf gnutls-$installed_gnutls_version.tar.bz2
fi
installed_gnutls_version=""
fi
}
install_lua() {
if [ "$LUA_VERSION" -a ! -f lua-$LUA_VERSION-done ] ; then
echo "Downloading, building, and installing Lua:"
[ -f lua-$LUA_VERSION.tar.gz ] || curl -L -O https://www.lua.org/ftp/lua-$LUA_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat lua-$LUA_VERSION.tar.gz | tar xf - || exit 1
cd lua-$LUA_VERSION
make MYCFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" MYLDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" $MAKE_BUILD_OPTS macosx || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch lua-$LUA_VERSION-done
fi
}
uninstall_lua() {
if [ ! -z "$installed_lua_version" ] ; then
echo "Uninstalling Lua:"
#
# Lua has no "make uninstall", so just remove stuff manually.
# There's no configure script, so there's no need for
# "make distclean", either; just do "make clean".
#
(cd /usr/local/bin; $DO_RM -f lua luac)
(cd /usr/local/include; $DO_RM -f lua.h luaconf.h lualib.h lauxlib.h lua.hpp)
(cd /usr/local/lib; $DO_RM -f liblua.a)
(cd /usr/local/man/man1; $DO_RM -f lua.1 luac.1)
cd lua-$installed_lua_version
make clean || exit 1
cd ..
rm lua-$installed_lua_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf lua-$installed_lua_version
rm -rf lua-$installed_lua_version.tar.gz
fi
installed_lua_version=""
fi
}
install_snappy() {
if [ "$SNAPPY_VERSION" -a ! -f snappy-$SNAPPY_VERSION-done ] ; then
echo "Downloading, building, and installing snappy:"
[ -f snappy-$SNAPPY_VERSION.tar.gz ] || curl -L -o snappy-$SNAPPY_VERSION.tar.gz https://github.com/google/snappy/archive/$SNAPPY_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat snappy-$SNAPPY_VERSION.tar.gz | tar xf - || exit 1
cd snappy-$SNAPPY_VERSION
mkdir build_dir
cd build_dir
#
# Build a shared library, because we'll be linking libwireshark,
# which is a C library, with libsnappy, and libsnappy is a C++
# library and requires the C++ run time; the shared library
# will carry that dependency with it, so linking with it should
# Just Work.
#
MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" cmake -DBUILD_SHARED_LIBS=YES ../ || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ../..
touch snappy-$SNAPPY_VERSION-done
fi
}
uninstall_snappy() {
if [ ! -z "$installed_snappy_version" ] ; then
echo "Uninstalling snappy:"
cd snappy-$installed_snappy_version
#
# snappy uses cmake and doesn't support "make uninstall";
# just remove what we know it installs.
#
# $DO_MAKE_UNINSTALL || exit 1
if [ -s build_dir/install_manifest.txt ] ; then
while read -r ; do $DO_RM -v "$REPLY" ; done < <(cat build_dir/install_manifest.txt; echo)
else
$DO_RM -f /usr/local/lib/libsnappy.1.1.8.dylib \
/usr/local/lib/libsnappy.1.dylib \
/usr/local/lib/libsnappy.dylib \
/usr/local/include/snappy-c.h \
/usr/local/include/snappy-sinksource.h \
/usr/local/include/snappy-stubs-public.h \
/usr/local/include/snappy.h \
/usr/local/lib/cmake/Snappy/SnappyConfig.cmake \
/usr/local/lib/cmake/Snappy/SnappyConfigVersion.cmake \
/usr/local/lib/cmake/Snappy/SnappyTargets-noconfig.cmake \
/usr/local/lib/cmake/Snappy/SnappyTargets.cmake || exit 1
fi
#
# snappy uses cmake and doesn't support "make distclean";
#.just remove the entire build directory.
#
# make distclean || exit 1
rm -rf build_dir || exit 1
cd ..
rm snappy-$installed_snappy_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf snappy-$installed_snappy_version
rm -rf snappy-$installed_snappy_version.tar.gz
fi
installed_snappy_version=""
fi
}
install_zstd() {
if [ "$ZSTD_VERSION" -a ! -f zstd-$ZSTD_VERSION-done ] ; then
echo "Downloading, building, and installing zstd:"
[ -f zstd-$ZSTD_VERSION.tar.gz ] || curl -L -O https://github.com/facebook/zstd/releases/download/v$ZSTD_VERSION/zstd-$ZSTD_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat zstd-$ZSTD_VERSION.tar.gz | tar xf - || exit 1
cd zstd-$ZSTD_VERSION
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch zstd-$ZSTD_VERSION-done
fi
}
uninstall_zstd() {
if [ ! -z "$installed_zstd_version" ] ; then
echo "Uninstalling zstd:"
cd zstd-$installed_zstd_version
$DO_MAKE_UNINSTALL || exit 1
#
# zstd has no configure script, so there's no need for
# "make distclean", and the Makefile supplied with it
# has no "make distclean" rule; just do "make clean".
#
make clean || exit 1
cd ..
rm zstd-$installed_zstd_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf zstd-$installed_zstd_version
rm -rf zstd-$installed_zstd_version.tar.gz
fi
installed_zstd_version=""
fi
}
install_libxml2() {
if [ "$LIBXML2_VERSION" -a ! -f libxml2-$LIBXML2_VERSION-done ] ; then
echo "Downloading, building, and installing libxml2:"
[ -f libxml2-$LIBXML2_VERSION.tar.gz ] || curl -L -O ftp://xmlsoft.org/libxml2/libxml2-$LIBXML2_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat libxml2-$LIBXML2_VERSION.tar.gz | tar xf - || exit 1
cd libxml2-$LIBXML2_VERSION
#
# At least on macOS 12.0.1 with Xcode 13.1, when we build
# libxml2, the linker complains that we don't have the right
# to link with the Python framework, so don't build with
# Python.
#
CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-python || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libxml2-$LIBXML2_VERSION-done
fi
}
uninstall_libxml2() {
if [ ! -z "$installed_libxml2_version" ] ; then
echo "Uninstalling libxml2:"
cd libxml2-$installed_libxml2_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libxml2-$installed_libxml2_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libxml2-$installed_libxml2_version
rm -rf libxml2-$installed_libxml2_version.tar.gz
fi
installed_libxml2_version=""
fi
}
install_lz4() {
if [ "$LZ4_VERSION" -a ! -f lz4-$LZ4_VERSION-done ] ; then
echo "Downloading, building, and installing lz4:"
#
# lz4 switched from sequentially numbered releases, named rN,
# to vX.Y.Z-numbered releases.
#
# The old sequentially-numbered releases were in tarballs
# at https://github.com/lz4/lz4/archive/rN.tar.gz, which
# extract into an lz4-rN directory.
#
# THe new vX.Y.Z-numbered releases are in tarballs at
# https://github.com/lz4/lz4/archive/vX.Y.Z.tar.gz, which
# extract into an lz4-X.Y.Z directory - no, not lz4-vX.Y.Z,
# just lz4-X.Y.Z.
#
# We expect LZ4_VERSION to be set to rN for the sequentially-
# numbered releases and X.Y.Z - not vX.Y.Z - for the vX.Y.Z-
# numbered releases. We also tell Curl to download the tarball
# with a name that corresponds to the name of the target
# directory, so that it begins with "lz4-" and ends with either
# "rN" or "X.Y.Z", to match what almost all of the other
# support libraries do.
#
if [[ "$LZ4_VERSION" == r* ]]
then
[ -f lz4-$LZ4_VERSION.tar.gz ] || curl -L -o lz4-$LZ4_VERSION.tar.gz https://github.com/lz4/lz4/archive/$LZ4_VERSION.tar.gz || exit 1
else
[ -f lz4-$LZ4_VERSION.tar.gz ] || curl -L -o lz4-$LZ4_VERSION.tar.gz https://github.com/lz4/lz4/archive/v$LZ4_VERSION.tar.gz || exit 1
fi
$no_build && echo "Skipping installation" && return
gzcat lz4-$LZ4_VERSION.tar.gz | tar xf - || exit 1
cd lz4-$LZ4_VERSION
#
# No configure script here, but it appears that if MOREFLAGS is
# set, that's added to CFLAGS, and those are combined with LDFLAGS
# and CXXFLAGS into FLAGS, which is used when building source
# files and libraries.
#
MOREFLAGS="-D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch lz4-$LZ4_VERSION-done
fi
}
uninstall_lz4() {
if [ ! -z "$installed_lz4_version" ] ; then
echo "Uninstalling lz4:"
cd lz4-$installed_lz4_version
$DO_MAKE_UNINSTALL || exit 1
#
# lz4's Makefile doesn't support "make distclean"; just do
# "make clean". Perhaps not using autotools means that
# there's no need for "make distclean".
#
# make distclean || exit 1
make clean || exit 1
cd ..
rm lz4-$installed_lz4_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
# "make install" apparently causes some stuff to be
# modified in the build tree, so, as it's done as
# root, that leaves stuff owned by root in the build
# tree. Therefore, we have to remove the build tree
# as root.
#
sudo rm -rf lz4-$installed_lz4_version
rm -rf lz4-$installed_lz4_version.tar.gz
fi
installed_lz4_version=""
fi
}
install_sbc() {
if [ "$SBC_VERSION" -a ! -f sbc-$SBC_VERSION-done ] ; then
echo "Downloading, building, and installing sbc:"
[ -f sbc-$SBC_VERSION.tar.gz ] || curl -L -O https://www.kernel.org/pub/linux/bluetooth/sbc-$SBC_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat sbc-$SBC_VERSION.tar.gz | tar xf - || exit 1
cd sbc-$SBC_VERSION
if [ "$DARWIN_PROCESSOR_ARCH" = "arm" ] ; then
CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS -U__ARM_NEON__" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-tools --disable-tester --disable-shared || exit 1
else
CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-tools --disable-tester --disable-shared || exit 1
fi
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch sbc-$SBC_VERSION-done
fi
}
uninstall_sbc() {
if [ ! -z "$installed_sbc_version" ] ; then
echo "Uninstalling sbc:"
cd sbc-$installed_sbc_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm sbc-$installed_sbc_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf sbc-$installed_sbc_version
rm -rf sbc-$installed_sbc_version.tar.gz
fi
installed_sbc_version=""
fi
}
install_maxminddb() {
if [ "$MAXMINDDB_VERSION" -a ! -f maxminddb-$MAXMINDDB_VERSION-done ] ; then
echo "Downloading, building, and installing MaxMindDB API:"
[ -f libmaxminddb-$MAXMINDDB_VERSION.tar.gz ] || curl -L -O https://github.com/maxmind/libmaxminddb/releases/download/$MAXMINDDB_VERSION/libmaxminddb-$MAXMINDDB_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat libmaxminddb-$MAXMINDDB_VERSION.tar.gz | tar xf - || exit 1
cd libmaxminddb-$MAXMINDDB_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch maxminddb-$MAXMINDDB_VERSION-done
fi
}
uninstall_maxminddb() {
if [ ! -z "$installed_maxminddb_version" ] ; then
echo "Uninstalling MaxMindDB API:"
cd libmaxminddb-$installed_maxminddb_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm maxminddb-$installed_maxminddb_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libmaxminddb-$installed_maxminddb_version
rm -rf libmaxminddb-$installed_maxminddb_version.tar.gz
fi
installed_maxminddb_version=""
fi
}
install_c_ares() {
if [ "$CARES_VERSION" -a ! -f c-ares-$CARES_VERSION-done ] ; then
echo "Downloading, building, and installing C-Ares API:"
[ -f c-ares-$CARES_VERSION.tar.gz ] || curl -L -O https://c-ares.org/download/c-ares-$CARES_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat c-ares-$CARES_VERSION.tar.gz | tar xf - || exit 1
cd c-ares-$CARES_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch c-ares-$CARES_VERSION-done
fi
}
uninstall_c_ares() {
if [ ! -z "$installed_cares_version" ] ; then
echo "Uninstalling C-Ares API:"
cd c-ares-$installed_cares_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm c-ares-$installed_cares_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf c-ares-$installed_cares_version
rm -rf c-ares-$installed_cares_version.tar.gz
fi
installed_cares_version=""
fi
}
install_libssh() {
if [ "$LIBSSH_VERSION" -a ! -f libssh-$LIBSSH_VERSION-done ] ; then
echo "Downloading, building, and installing libssh:"
LIBSSH_MAJOR_VERSION="`expr $LIBSSH_VERSION : '\([0-9][0-9]*\).*'`"
LIBSSH_MINOR_VERSION="`expr $LIBSSH_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
LIBSSH_MAJOR_MINOR_VERSION=$LIBSSH_MAJOR_VERSION.$LIBSSH_MINOR_VERSION
[ -f libssh-$LIBSSH_VERSION.tar.xz ] || curl -L -O https://www.libssh.org/files/$LIBSSH_MAJOR_MINOR_VERSION/libssh-$LIBSSH_VERSION.tar.xz
$no_build && echo "Skipping installation" && return
xzcat libssh-$LIBSSH_VERSION.tar.xz | tar xf - || exit 1
cd libssh-$LIBSSH_VERSION
patch -p0 <${topdir}/macosx-support-lib-patches/libssh-void-arglists.patch || exit 1
mkdir build
cd build
MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" cmake -DWITH_GCRYPT=1 ../ || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ../..
touch libssh-$LIBSSH_VERSION-done
fi
}
uninstall_libssh() {
if [ ! -z "$installed_libssh_version" ] ; then
echo "Uninstalling libssh:"
cd libssh-$installed_libssh_version
#
# libssh uses cmake and doesn't support "make uninstall";
# just remove what we know it installs.
#
# $DO_MAKE_UNINSTALL || exit 1
$DO_RM -rf /usr/local/lib/libssh* \
/usr/local/include/libssh \
/usr/local/lib/pkgconfig/libssh* \
/usr/local/lib/cmake/libssh || exit 1
#
# libssh uses cmake and doesn't support "make distclean";
# just remove the entire build directory.
#
# make distclean || exit 1
rm -rf build || exit 1
cd ..
rm libssh-$installed_libssh_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libssh-$installed_libssh_version
rm -rf libssh-$installed_libssh_version.tar.gz
fi
installed_libssh_version=""
fi
}
install_nghttp2() {
if [ "$NGHTTP2_VERSION" -a ! -f nghttp2-$NGHTTP2_VERSION-done ] ; then
echo "Downloading, building, and installing nghttp2:"
[ -f nghttp2-$NGHTTP2_VERSION.tar.xz ] || curl -L -O https://github.com/nghttp2/nghttp2/releases/download/v$NGHTTP2_VERSION/nghttp2-$NGHTTP2_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat nghttp2-$NGHTTP2_VERSION.tar.xz | tar xf - || exit 1
cd nghttp2-$NGHTTP2_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-lib-only || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch nghttp2-$NGHTTP2_VERSION-done
fi
}
uninstall_nghttp2() {
if [ ! -z "$installed_nghttp2_version" ] ; then
echo "Uninstalling nghttp2:"
cd nghttp2-$installed_nghttp2_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm nghttp2-$installed_nghttp2_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf nghttp2-$installed_nghttp2_version
rm -rf nghttp2-$installed_nghttp2_version.tar.xz
fi
installed_nghttp2_version=""
fi
}
install_nghttp3() {
if [ "$NGHTTP3_VERSION" -a ! -f nghttp3-$NGHTTP3_VERSION-done ] ; then
echo "Downloading, building, and installing nghttp3:"
[ -f nghttp3-$NGHTTP3_VERSION.tar.xz ] || curl -L -O https://github.com/ngtcp2/nghttp3/releases/download/v$NGHTTP3_VERSION/nghttp3-$NGHTTP3_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat nghttp3-$NGHTTP3_VERSION.tar.xz | tar xf - || exit 1
cd nghttp3-$NGHTTP3_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-lib-only || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch nghttp3-$NGHTTP3_VERSION-done
fi
}
uninstall_nghttp3() {
if [ ! -z "$installed_nghttp3_version" ] ; then
echo "Uninstalling nghttp3:"
cd nghttp3-$installed_nghttp3_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm nghttp3-$installed_nghttp3_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf nghttp3-$installed_nghttp3_version
rm -rf nghttp3-$installed_nghttp3_version.tar.xz
fi
installed_nghttp3_version=""
fi
}
install_libtiff() {
if [ "$LIBTIFF_VERSION" -a ! -f tiff-$LIBTIFF_VERSION-done ] ; then
echo "Downloading, building, and installing libtiff:"
[ -f tiff-$LIBTIFF_VERSION.tar.gz ] ||
curl --fail -L -O https://download.osgeo.org/libtiff/tiff-$LIBTIFF_VERSION.tar.gz ||
curl --fail -L -O https://download.osgeo.org/libtiff/old/tiff-$LIBTIFF_VERSION.tar.gz ||
exit 1
$no_build && echo "Skipping installation" && return
gzcat tiff-$LIBTIFF_VERSION.tar.gz | tar xf - || exit 1
cd tiff-$LIBTIFF_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch tiff-$LIBTIFF_VERSION-done
fi
}
uninstall_libtiff() {
if [ ! -z "$installed_libtiff_version" ] ; then
echo "Uninstalling libtiff:"
cd tiff-$installed_libtiff_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm tiff-$installed_libtiff_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf tiff-$installed_libtiff_version
rm -rf tiff-$installed_libtiff_version.tar.gz
fi
installed_libtiff_version=""
fi
}
install_spandsp() {
if [ "$SPANDSP_VERSION" -a ! -f spandsp-$SPANDSP_VERSION-done ] ; then
echo "Downloading, building, and installing SpanDSP:"
[ -f spandsp-$SPANDSP_VERSION.tar.gz ] || curl -L -O https://www.soft-switch.org/downloads/spandsp/spandsp-$SPANDSP_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat spandsp-$SPANDSP_VERSION.tar.gz | tar xf - || exit 1
cd spandsp-$SPANDSP_VERSION
#
# Don't use -Wunused-but-set-variable, as it's not supported
# by all the gcc versions in the versions of Xcode that we
# support.
#
patch -p0 <${topdir}/macosx-support-lib-patches/spandsp-configure-patch || exit 1
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch spandsp-$SPANDSP_VERSION-done
fi
}
uninstall_spandsp() {
if [ ! -z "$installed_spandsp_version" ] ; then
echo "Uninstalling SpanDSP:"
cd spandsp-$installed_spandsp_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm spandsp-$installed_spandsp_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf spandsp-$installed_spandsp_version
rm -rf spandsp-$installed_spandsp_version.tar.gz
fi
installed_spandsp_version=""
fi
}
install_speexdsp() {
if [ "$SPEEXDSP_VERSION" -a ! -f speexdsp-$SPEEXDSP_VERSION-done ] ; then
echo "Downloading, building, and installing SpeexDSP:"
[ -f speexdsp-$SPEEXDSP_VERSION.tar.gz ] || curl -L -O https://ftp.osuosl.org/pub/xiph/releases/speex/speexdsp-$SPEEXDSP_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat speexdsp-$SPEEXDSP_VERSION.tar.gz | tar xf - || exit 1
cd speexdsp-$SPEEXDSP_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch speexdsp-$SPEEXDSP_VERSION-done
fi
}
uninstall_speexdsp() {
if [ ! -z "$installed_speexdsp_version" ] ; then
echo "Uninstalling SpeexDSP:"
cd speexdsp-$installed_speexdsp_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm speexdsp-$installed_speexdsp_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf speexdsp-$installed_speexdsp_version
rm -rf speexdsp-$installed_speexdsp_version.tar.gz
fi
installed_speexdsp_version=""
fi
}
install_bcg729() {
if [ "$BCG729_VERSION" -a ! -f bcg729-$BCG729_VERSION-done ] ; then
echo "Downloading, building, and installing bcg729:"
[ -f bcg729-$BCG729_VERSION.tar.gz ] || curl -L -O https://download.savannah.gnu.org/releases/linphone/plugins/sources/bcg729-$BCG729_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat bcg729-$BCG729_VERSION.tar.gz | tar xf - || exit 1
cd bcg729-$BCG729_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch bcg729-$BCG729_VERSION-done
fi
}
uninstall_bcg729() {
if [ ! -z "$installed_bcg729_version" ] ; then
echo "Uninstalling bcg729:"
cd bcg729-$installed_bcg729_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm bcg729-$installed_bcg729_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf bcg729-$installed_bcg729_version
rm -rf bcg729-$installed_bcg729_version.tar.gz
fi
installed_bcg729_version=""
fi
}
install_ilbc() {
if [ -n "$ILBC_VERSION" ] && [ ! -f ilbc-$ILBC_VERSION-done ] ; then
echo "Downloading, building, and installing iLBC:"
[ -f libilbc-$ILBC_VERSION.tar.bz ] || curl --location --remote-name https://github.com/TimothyGu/libilbc/releases/download/v$ILBC_VERSION/libilbc-$ILBC_VERSION.tar.bz2 || exit 1
$no_build && echo "Skipping installation" && return
bzcat libilbc-$ILBC_VERSION.tar.bz2 | tar xf - || exit 1
cd libilbc-$ILBC_VERSION || exit 1
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch ilbc-$ILBC_VERSION-done
fi
}
uninstall_ilbc() {
if [ -n "$installed_ilbc_version" ] ; then
echo "Uninstalling iLBC:"
cd "libilbc-$installed_ilbc_version" || exit 1
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm "ilbc-$installed_ilbc_version-done"
if [ "$#" -eq 1 ] && [ "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf "libilbc-$installed_ilbc_version"
rm -rf "libilbc-$installed_ilbc_version.tar.bz2"
fi
installed_ilbc_version=""
fi
}
install_opus() {
if [ "$OPUS_VERSION" -a ! -f opus-$OPUS_VERSION-done ] ; then
echo "Downloading, building, and installing opus:"
[ -f opus-$OPUS_VERSION.tar.gz ] || curl -L -O https://archive.mozilla.org/pub/opus/opus-$OPUS_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat opus-$OPUS_VERSION.tar.gz | tar xf - || exit 1
cd opus-$OPUS_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch opus-$OPUS_VERSION-done
fi
}
uninstall_opus() {
if [ ! -z "$installed_opus_version" ] ; then
echo "Uninstalling opus:"
cd opus-$installed_opus_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm opus-$installed_opus_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf opus-$installed_opus_version
rm -rf opus-$installed_opus_version.tar.gz
fi
installed_opus_version=""
fi
}
install_python3() {
# The macos11 installer can be deployed to older versions, down to
# 10.9 (Mavericks), but is still considered experimental so continue
# to use the 64-bit installer (10.9) on earlier releases for now.
local macver=x10.9
if [[ $DARWIN_MAJOR_VERSION -gt 19 ]]; then
# The macos11 installer is required for Arm-based Macs, which require
# macOS 11 Big Sur. Note that the package name is "11.0" (no x) for
# 3.9.1 but simply "11" for 3.9.2 (and later)
if [[ $PYTHON3_VERSION = 3.9.1 ]]; then
macver=11.0
else
macver=11
fi
fi
if [ "$PYTHON3_VERSION" -a ! -f python3-$PYTHON3_VERSION-done ] ; then
echo "Downloading and installing python3:"
[ -f python-$PYTHON3_VERSION-macos$macver.pkg ] || curl -L -O https://www.python.org/ftp/python/$PYTHON3_VERSION/python-$PYTHON3_VERSION-macos$macver.pkg || exit 1
$no_build && echo "Skipping installation" && return
sudo installer -target / -pkg python-$PYTHON3_VERSION-macos$macver.pkg || exit 1
touch python3-$PYTHON3_VERSION-done
#
# On macOS, the pip3 installed from Python packages appears to
# install scripts /Library/Frameworks/Python.framework/Versions/M.N/bin,
# where M.N is the major and minor version of Python (the dot-dot
# release is irrelevant).
#
# Strip off any dot-dot component in $PYTHON3_VERSION.
#
python_version=`echo $PYTHON3_VERSION | sed 's/\([1-9][0-9]*\.[1-9][0-9]*\).*/\1/'`
#
# Now treat Meson as being in the directory in question.
#
MESON="/Library/Frameworks/Python.framework/Versions/$python_version/bin/meson"
else
#
# We're using the Python 3 that's in /usr/bin, the pip3 for
# which installs scripts in /usr/local/bin, so, when we
# install Meson, look for it there.
#
MESON=/usr/local/bin/meson
fi
}
uninstall_python3() {
# Major version (e.g. "3.7")
local PYTHON_VERSION=${installed_python3_version%.*}
if [ ! -z "$installed_python3_version" ] ; then
echo "Uninstalling python3:"
frameworkdir="/Library/Frameworks/Python.framework/Versions/$PYTHON_VERSION"
sudo rm -rf "$frameworkdir"
sudo rm -rf "/Applications/Python $PYTHON_VERSION"
sudo find /usr/local/bin -maxdepth 1 -lname "*$frameworkdir/bin/*" -delete
# Remove three symlinks and empty directories. Removing directories
# might fail if for some reason multiple versions are installed.
sudo rm /Library/Frameworks/Python.framework/Headers
sudo rm /Library/Frameworks/Python.framework/Python
sudo rm /Library/Frameworks/Python.framework/Resources
sudo rmdir /Library/Frameworks/Python.framework/Versions
sudo rmdir /Library/Frameworks/Python.framework
sudo pkgutil --forget org.python.Python.PythonApplications-$PYTHON_VERSION
sudo pkgutil --forget org.python.Python.PythonDocumentation-$PYTHON_VERSION
sudo pkgutil --forget org.python.Python.PythonFramework-$PYTHON_VERSION
sudo pkgutil --forget org.python.Python.PythonUnixTools-$PYTHON_VERSION
rm python3-$installed_python3_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -f python-$installed_python3_version-macos11.pkg
rm -f python-$installed_python3_version-macos11.0.pkg
rm -f python-$installed_python3_version-macosx10.9.pkg
rm -f python-$installed_python3_version-macosx10.6.pkg
fi
installed_python3_version=""
fi
}
install_brotli() {
if [ "$BROTLI_VERSION" -a ! -f brotli-$BROTLI_VERSION-done ] ; then
echo "Downloading, building, and installing brotli:"
[ -f brotli-$BROTLI_VERSION.tar.gz ] || curl -L -o brotli-$BROTLI_VERSION.tar.gz https://github.com/google/brotli/archive/v$BROTLI_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat brotli-$BROTLI_VERSION.tar.gz | tar xf - || exit 1
cd brotli-$BROTLI_VERSION
mkdir build_dir
cd build_dir
MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" cmake ../ || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ../..
touch brotli-$BROTLI_VERSION-done
fi
}
uninstall_brotli() {
if [ ! -z "$installed_brotli_version" ] ; then
echo "Uninstalling brotli:"
cd brotli-$installed_brotli_version
#
# brotli uses cmake on macOS and doesn't support "make uninstall";
# just remove what we know it installs.
#
# $DO_MAKE_UNINSTALL || exit 1
$DO_RM -rf /usr/local/bin/brotli \
/usr/local/lib/libbrotli* \
/usr/local/include/brotli \
/usr/local/lib/pkgconfig/libbrotli* || exit 1
#
# brotli uses cmake on macOS and doesn't support "make distclean";
# just remove the enire build directory.
#
# make distclean || exit 1
rm -rf build_dir || exit 1
cd ..
rm brotli-$installed_brotli_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf brotli-$installed_brotli_version
rm -rf brotli-$installed_brotli_version.tar.gz
fi
installed_brotli_version=""
fi
}
install_minizip() {
if [ "$ZLIB_VERSION" ] && [ ! -f minizip-$ZLIB_VERSION-done ] ; then
echo "Downloading, building, and installing zlib for minizip:"
[ -f zlib-$ZLIB_VERSION.tar.gz ] || curl -L -o zlib-$ZLIB_VERSION.tar.gz https://zlib.net/zlib-$ZLIB_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat zlib-$ZLIB_VERSION.tar.gz | tar xf - || exit 1
#
# minizip ships both with a minimal Makefile that doesn't
# support "make install", "make uninstall", or "make distclean",
# and with a Makefile.am file that, if we do an autoreconf,
# gives us a configure script, and a Makefile.in that, if we run
# the configure script, gives us a Makefile that supports ll of
# those targets, and that installs a pkg-config .pc file for
# minizip.
#
# So that's what we do.
#
cd zlib-$ZLIB_VERSION/contrib/minizip || exit 1
LIBTOOLIZE=glibtoolize autoreconf --force --install
CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ../../..
touch minizip-$ZLIB_VERSION-done
fi
}
uninstall_minizip() {
if [ -n "$installed_minizip_version" ] ; then
echo "Uninstalling minizip:"
cd zlib-$installed_minizip_version/contrib/minizip
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ../../..
rm minizip-$installed_minizip_version-done
if [ "$#" -eq 1 ] && [ "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf zlib-$installed_minizip_version
rm -rf zlib-$installed_minizip_version.tar.gz
fi
installed_minizip_version=""
fi
}
install_sparkle() {
if [ "$SPARKLE_VERSION" ] && [ ! -f sparkle-$SPARKLE_VERSION-done ] ; then
echo "Downloading and installing Sparkle:"
#
# Download the tarball and unpack it in /usr/local/Sparkle-x.y.z
#
[ -f Sparkle-$SPARKLE_VERSION.tar.xz ] || curl -L -o Sparkle-$SPARKLE_VERSION.tar.xz https://github.com/sparkle-project/Sparkle/releases/download/$SPARKLE_VERSION/Sparkle-$SPARKLE_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
test -d "/usr/local/Sparkle-$SPARKLE_VERSION" || sudo mkdir "/usr/local/Sparkle-$SPARKLE_VERSION"
sudo tar -C "/usr/local/Sparkle-$SPARKLE_VERSION" -xpof Sparkle-$SPARKLE_VERSION.tar.xz
touch sparkle-$SPARKLE_VERSION-done
fi
}
uninstall_sparkle() {
if [ -n "$installed_sparkle_version" ]; then
echo "Uninstalling Sparkle:"
sudo rm -rf "/usr/local/Sparkle-$installed_sparkle_version"
if [ "$#" -eq 1 ] && [ "$1" = "-r" ] ; then
rm -f "Sparkle-$installed_sparkle_version.tar.xz"
fi
installed_sparkle_version=""
fi
}
install_all() {
#
# Check whether the versions we have installed are the versions
# requested; if not, uninstall the installed versions.
#
if [ ! -z "$installed_brotli_version" -a \
"$installed_brotli_version" != "$BROTLI_VERSION" ] ; then
echo "Installed brotli version is $installed_brotli_version"
if [ -z "$BROTLI_VERSION" ] ; then
echo "brotli is not requested"
else
echo "Requested brotli version is $BROTLI_VERSION"
fi
uninstall_brotli -r
fi
if [ ! -z "$installed_python3_version" -a \
"$installed_python3_version" != "$PYTHON3_VERSION" ] ; then
echo "Installed python3 version is $installed_python3_version"
if [ -z "$PYTHON3_VERSION" ] ; then
echo "python3 is not requested"
else
echo "Requested python3 version is $PYTHON3_VERSION"
fi
uninstall_python3 -r
fi
if [ ! -z "$installed_bcg729_version" -a \
"$installed_bcg729_version" != "$BCG729_VERSION" ] ; then
echo "Installed bcg729 version is $installed_bcg729_version"
if [ -z "$BCG729_VERSION" ] ; then
echo "bcg729 is not requested"
else
echo "Requested bcg729 version is $BCG729_VERSION"
fi
uninstall_bcg729 -r
fi
if [ -n "$installed_ilbc_version" ] \
&& [ "$installed_ilbc_version" != "$ILBC_VERSION" ] ; then
echo "Installed iLBC version is $installed_ilbc_version"
if [ -z "$ILBC_VERSION" ] ; then
echo "iLBC is not requested"
else
echo "Requested iLBC version is $ILBC_VERSION"
fi
uninstall_ilbc -r
fi
if [ -n "$installed_opus_version" ] \
&& [ "$installed_opus_version" != "$OPUS_VERSION" ] ; then
echo "Installed opus version is $installed_opus_version"
if [ -z "$OPUS_VERSION" ] ; then
echo "opus is not requested"
else
echo "Requested opus version is $OPUS_VERSION"
fi
uninstall_opus -r
fi
if [ ! -z "$installed_spandsp_version" -a \
"$installed_spandsp_version" != "$SPANDSP_VERSION" ] ; then
echo "Installed SpanDSP version is $installed_spandsp_version"
if [ -z "$SPANDSP_VERSION" ] ; then
echo "spandsp is not requested"
else
echo "Requested SpanDSP version is $SPANDSP_VERSION"
fi
uninstall_spandsp -r
fi
if [ ! -z "$installed_speexdsp_version" -a \
"$installed_speexdsp_version" != "$SPEEXDSP_VERSION" ] ; then
echo "Installed SpeexDSP version is $installed_speexdsp_version"
if [ -z "$SPEEXDSP_VERSION" ] ; then
echo "speexdsp is not requested"
else
echo "Requested SpeexDSP version is $SPEEXDSP_VERSION"
fi
uninstall_speexdsp -r
fi
if [ ! -z "$installed_libtiff_version" -a \
"$installed_libtiff_version" != "$LIBTIFF_VERSION" ] ; then
echo "Installed libtiff version is $installed_libtiff_version"
if [ -z "$LIBTIFF_VERSION" ] ; then
echo "libtiff is not requested"
else
echo "Requested libtiff version is $LIBTIFF_VERSION"
fi
uninstall_libtiff -r
fi
if [ ! -z "$installed_nghttp2_version" -a \
"$installed_nghttp2_version" != "$NGHTTP2_VERSION" ] ; then
echo "Installed nghttp2 version is $installed_nghttp2_version"
if [ -z "$NGHTTP2_VERSION" ] ; then
echo "nghttp2 is not requested"
else
echo "Requested nghttp2 version is $NGHTTP2_VERSION"
fi
uninstall_nghttp2 -r
fi
if [ ! -z "$installed_nghttp3_version" -a \
"$installed_nghttp3_version" != "$NGHTTP3_VERSION" ] ; then
echo "Installed nghttp3 version is $installed_nghttp3_version"
if [ -z "$NGHTTP3_VERSION" ] ; then
echo "nghttp3 is not requested"
else
echo "Requested nghttp3 version is $NGHTTP3_VERSION"
fi
uninstall_nghttp3 -r
fi
if [ ! -z "$installed_libssh_version" -a \
"$installed_libssh_version" != "$LIBSSH_VERSION" ] ; then
echo "Installed libssh version is $installed_libssh_version"
if [ -z "$LIBSSH_VERSION" ] ; then
echo "libssh is not requested"
else
echo "Requested libssh version is $LIBSSH_VERSION"
fi
uninstall_libssh -r
fi
if [ ! -z "$installed_cares_version" -a \
"$installed_cares_version" != "$CARES_VERSION" ] ; then
echo "Installed C-Ares version is $installed_cares_version"
if [ -z "$CARES_VERSION" ] ; then
echo "C-Ares is not requested"
else
echo "Requested C-Ares version is $CARES_VERSION"
fi
uninstall_c_ares -r
fi
if [ ! -z "$installed_maxminddb_version" -a \
"$installed_maxminddb_version" != "$MAXMINDDB_VERSION" ] ; then
echo "Installed MaxMindDB API version is $installed_maxminddb_version"
if [ -z "$MAXMINDDB_VERSION" ] ; then
echo "MaxMindDB is not requested"
else
echo "Requested MaxMindDB version is $MAXMINDDB_VERSION"
fi
uninstall_maxminddb -r
fi
if [ ! -z "$installed_sbc_version" -a \
"$installed_sbc_version" != "$SBC_VERSION" ] ; then
echo "Installed SBC version is $installed_sbc_version"
if [ -z "$SBC_VERSION" ] ; then
echo "SBC is not requested"
else
echo "Requested SBC version is $SBC_VERSION"
fi
uninstall_sbc -r
fi
if [ ! -z "$installed_lz4_version" -a \
"$installed_lz4_version" != "$LZ4_VERSION" ] ; then
echo "Installed LZ4 version is $installed_lz4_version"
if [ -z "$LZ4_VERSION" ] ; then
echo "LZ4 is not requested"
else
echo "Requested LZ4 version is $LZ4_VERSION"
fi
uninstall_lz4 -r
fi
if [ ! -z "$installed_libxml2_version" -a \
"$installed_libxml2_version" != "$LIBXML2_VERSION" ] ; then
echo "Installed libxml2 version is $installed_libxml2_version"
if [ -z "$LIBXML2_VERSION" ] ; then
echo "libxml2 is not requested"
else
echo "Requested libxml2 version is $LIBXML2_VERSION"
fi
uninstall_libxml2 -r
fi
if [ ! -z "$installed_snappy_version" -a \
"$installed_snappy_version" != "$SNAPPY_VERSION" ] ; then
echo "Installed SNAPPY version is $installed_snappy_version"
if [ -z "$SNAPPY_VERSION" ] ; then
echo "SNAPPY is not requested"
else
echo "Requested SNAPPY version is $SNAPPY_VERSION"
fi
uninstall_snappy -r
fi
if [ ! -z "$installed_lua_version" -a \
"$installed_lua_version" != "$LUA_VERSION" ] ; then
echo "Installed Lua version is $installed_lua_version"
if [ -z "$LUA_VERSION" ] ; then
echo "Lua is not requested"
else
echo "Requested Lua version is $LUA_VERSION"
fi
uninstall_lua -r
fi
if [ ! -z "$installed_gnutls_version" -a \
"$installed_gnutls_version" != "$GNUTLS_VERSION" ] ; then
echo "Installed GnuTLS version is $installed_gnutls_version"
if [ -z "$GNUTLS_VERSION" ] ; then
echo "GnuTLS is not requested"
else
echo "Requested GnuTLS version is $GNUTLS_VERSION"
fi
uninstall_gnutls -r
fi
if [ ! -z "$installed_nettle_version" -a \
"$installed_nettle_version" != "$NETTLE_VERSION" ] ; then
echo "Installed Nettle version is $installed_nettle_version"
if [ -z "$NETTLE_VERSION" ] ; then
echo "Nettle is not requested"
else
echo "Requested Nettle version is $NETTLE_VERSION"
fi
uninstall_nettle -r
fi
if [ ! -z "$installed_gmp_version" -a \
"$installed_gmp_version" != "$GMP_VERSION" ] ; then
echo "Installed GMP version is $installed_gmp_version"
if [ -z "$GMP_VERSION" ] ; then
echo "GMP is not requested"
else
echo "Requested GMP version is $GMP_VERSION"
fi
uninstall_gmp -r
fi
if [ ! -z "$installed_p11_kit_version" -a \
"$installed_p11_kit_version" != "$P11KIT_VERSION" ] ; then
echo "Installed p11-kit version is $installed_p11_kit_version"
if [ -z "$P11KIT_VERSION" ] ; then
echo "p11-kit is not requested"
else
echo "Requested p11-kit version is $P11KIT_VERSION"
fi
uninstall_p11_kit -r
fi
if [ ! -z "$installed_libtasn1_version" -a \
"$installed_libtasn1_version" != "$LIBTASN1_VERSION" ] ; then
echo "Installed libtasn1 version is $installed_libtasn1_version"
if [ -z "$LIBTASN1_VERSION" ] ; then
echo "libtasn1 is not requested"
else
echo "Requested libtasn1 version is $LIBTASN1_VERSION"
fi
uninstall_libtasn1 -r
fi
if [ ! -z "$installed_libgcrypt_version" -a \
"$installed_libgcrypt_version" != "$LIBGCRYPT_VERSION" ] ; then
echo "Installed libgcrypt version is $installed_libgcrypt_version"
if [ -z "$LIBGCRYPT_VERSION" ] ; then
echo "libgcrypt is not requested"
else
echo "Requested libgcrypt version is $LIBGCRYPT_VERSION"
fi
uninstall_libgcrypt -r
fi
if [ ! -z "$installed_libgpg_error_version" -a \
"$installed_libgpg_error_version" != "$LIBGPG_ERROR_VERSION" ] ; then
echo "Installed libgpg-error version is $installed_libgpg_error_version"
if [ -z "$LIBGPG_ERROR_VERSION" ] ; then
echo "libgpg-error is not requested"
else
echo "Requested libgpg-error version is $LIBGPG_ERROR_VERSION"
fi
uninstall_libgpg_error -r
fi
if [ ! -z "$installed_libsmi_version" -a \
"$installed_libsmi_version" != "$LIBSMI_VERSION" ] ; then
echo "Installed libsmi version is $installed_libsmi_version"
if [ -z "$LIBSMI_VERSION" ] ; then
echo "libsmi is not requested"
else
echo "Requested libsmi version is $LIBSMI_VERSION"
fi
uninstall_libsmi -r
fi
if [ ! -z "$installed_qt_version" -a \
"$installed_qt_version" != "$QT_VERSION" ] ; then
echo "Installed Qt version is $installed_qt_version"
if [ -z "$QT_VERSION" ] ; then
echo "Qt is not requested"
else
echo "Requested Qt version is $QT_VERSION"
fi
uninstall_qt -r
fi
if [ ! -z "$installed_glib_version" -a \
"$installed_glib_version" != "$GLIB_VERSION" ] ; then
echo "Installed GLib version is $installed_glib_version"
if [ -z "$GLIB_VERSION" ] ; then
echo "GLib is not requested"
else
echo "Requested GLib version is $GLIB_VERSION"
fi
uninstall_glib -r
fi
if [ ! -z "$installed_pkg_config_version" -a \
"$installed_pkg_config_version" != "$PKG_CONFIG_VERSION" ] ; then
echo "Installed pkg-config version is $installed_pkg_config_version"
if [ -z "$PKG_CONFIG_VERSION" ] ; then
echo "pkg-config is not requested"
else
echo "Requested pkg-config version is $PKG_CONFIG_VERSION"
fi
uninstall_pkg_config -r
fi
if [ ! -z "$installed_gettext_version" -a \
"$installed_gettext_version" != "$GETTEXT_VERSION" ] ; then
echo "Installed GNU gettext version is $installed_gettext_version"
if [ -z "$GETTEXT_VERSION" ] ; then
echo "GNU gettext is not requested"
else
echo "Requested GNU gettext version is $GETTEXT_VERSION"
fi
uninstall_gettext -r
fi
if [ ! -z "$installed_ninja_version" -a \
"$installed_ninja_version" != "$NINJA_VERSION" ] ; then
echo "Installed Ninja version is $installed_ninja_version"
if [ -z "$NINJA_VERSION" ] ; then
echo "Ninja is not requested"
else
echo "Requested Ninja version is $NINJA_VERSION"
fi
uninstall_ninja -r
fi
if [ ! -z "$installed_asciidoctorpdf_version" -a \
"$installed_asciidoctorpdf_version" != "$ASCIIDOCTORPDF_VERSION" ] ; then
echo "Installed Asciidoctor-pdf version is $installed_asciidoctorpdf_version"
if [ -z "$ASCIIDOCTORPDF_VERSION" ] ; then
echo "Asciidoctor-pdf is not requested"
else
echo "Requested Asciidoctor-pdf version is $ASCIIDOCTORPDF_VERSION"
fi
# XXX - really remove this?
# Or should we remember it as installed only if this script
# installed it?
#
uninstall_asciidoctorpdf -r
fi
if [ ! -z "$installed_asciidoctor_version" -a \
"$installed_asciidoctor_version" != "$ASCIIDOCTOR_VERSION" ] ; then
echo "Installed Asciidoctor version is $installed_asciidoctor_version"
if [ -z "$ASCIIDOCTOR_VERSION" ] ; then
echo "Asciidoctor is not requested"
else
echo "Requested Asciidoctor version is $ASCIIDOCTOR_VERSION"
fi
# XXX - really remove this?
# Or should we remember it as installed only if this script
# installed it?
#
uninstall_asciidoctor -r
fi
if [ ! -z "$installed_cmake_version" -a \
"$installed_cmake_version" != "$CMAKE_VERSION" ] ; then
echo "Installed CMake version is $installed_cmake_version"
if [ -z "$CMAKE_VERSION" ] ; then
echo "CMake is not requested"
else
echo "Requested CMake version is $CMAKE_VERSION"
fi
uninstall_cmake -r
fi
if [ ! -z "$installed_libtool_version" -a \
"$installed_libtool_version" != "$LIBTOOL_VERSION" ] ; then
echo "Installed GNU libtool version is $installed_libtool_version"
if [ -z "$LIBTOOL_VERSION" ] ; then
echo "GNU libtool is not requested"
else
echo "Requested GNU libtool version is $LIBTOOL_VERSION"
fi
uninstall_libtool -r
fi
if [ ! -z "$installed_automake_version" -a \
"$installed_automake_version" != "$AUTOMAKE_VERSION" ] ; then
echo "Installed GNU automake version is $installed_automake_version"
if [ -z "$AUTOMAKE_VERSION" ] ; then
echo "GNU automake is not requested"
else
echo "Requested GNU automake version is $AUTOMAKE_VERSION"
fi
uninstall_automake -r
fi
if [ ! -z "$installed_autoconf_version" -a \
"$installed_autoconf_version" != "$AUTOCONF_VERSION" ] ; then
echo "Installed GNU autoconf version is $installed_autoconf_version"
if [ -z "$AUTOCONF_VERSION" ] ; then
echo "GNU autoconf is not requested"
else
echo "Requested GNU autoconf version is $AUTOCONF_VERSION"
fi
uninstall_autoconf -r
fi
if [ ! -z "$installed_pcre_version" -a \
"$installed_pcre_version" != "$PCRE_VERSION" ] ; then
echo "Installed pcre version is $installed_pcre_version"
if [ -z "$PCRE_VERSION" ] ; then
echo "pcre is not requested"
else
echo "Requested pcre version is $PCRE_VERSION"
fi
uninstall_pcre -r
fi
if [ -n "$installed_pcre2_version" -a \
"$installed_pcre2_version" != "$PCRE2_VERSION" ] ; then
echo "Installed pcre2 version is $installed_pcre2_version"
if [ -z "$PCRE2_VERSION" ] ; then
echo "pcre2 is not requested"
else
echo "Requested pcre2 version is $PCRE2_VERSION"
fi
uninstall_pcre2 -r
fi
if [ ! -z "$installed_lzip_version" -a \
"$installed_lzip_version" != "$LZIP_VERSION" ] ; then
echo "Installed lzip version is $installed_lzip_version"
if [ -z "$LZIP_VERSION" ] ; then
echo "lzip is not requested"
else
echo "Requested lzip version is $LZIP_VERSION"
fi
uninstall_lzip -r
fi
if [ ! -z "$installed_xz_version" -a \
"$installed_xz_version" != "$XZ_VERSION" ] ; then
echo "Installed xz version is $installed_xz_version"
if [ -z "$XZ_VERSION" ] ; then
echo "xz is not requested"
else
echo "Requested xz version is $XZ_VERSION"
fi
uninstall_xz -r
fi
if [ ! -z "$installed_curl_version" -a \
"$installed_curl_version" != "$CURL_VERSION" ] ; then
echo "Installed curl version is $installed_curl_version"
if [ -z "$CURL_VERSION" ] ; then
echo "curl is not requested"
else
echo "Requested curl version is $CURL_VERSION"
fi
uninstall_curl -r
fi
if [ ! -z "$installed_minizip_version" -a \
"$installed_minizip_version" != "$ZLIB_VERSION" ] ; then
echo "Installed minizip (zlib) version is $installed_minizip_version"
if [ -z "$ZLIB_VERSION" ] ; then
echo "minizip is not requested"
else
echo "Requested minizip (zlib) version is $ZLIB_VERSION"
fi
uninstall_minizip -r
fi
if [ ! -z "$installed_sparkle_version" -a \
"$installed_sparkle_version" != "$SPARKLE_VERSION" ] ; then
echo "Installed Sparkle version is $installed_sparkle_version"
if [ -z "$SPARKLE_VERSION" ] ; then
echo "Sparkle is not requested"
else
echo "Requested Sparkle version is $SPARKLE_VERSION"
fi
uninstall_sparkle -r
fi
#
# Start with curl: we may need it to download and install xz.
#
install_curl
#
# Now intall xz: it is the sole download format of glib later than 2.31.2.
#
install_xz
install_lzip
install_pcre
install_autoconf
install_automake
install_libtool
install_cmake
install_pcre2
#
# Install Python 3 now; not only is it needed for the Wireshark
# build process, it's also needed for the Meson build system,
# which newer versions of GLib use as their build system.
#
install_python3
#
# Now install Meson and pytest.
#
install_meson
install_pytest
install_ninja
install_asciidoctor
install_asciidoctorpdf
#
# Start with GNU gettext; GLib requires it, and macOS doesn't have it
# or a BSD-licensed replacement.
#
# At least on Lion with Xcode 4, _FORTIFY_SOURCE gets defined as 2
# by default, which causes, for example, stpncpy to be defined as
# a hairy macro that collides with the GNU gettext configure script's
# attempts to workaround AIX's lack of a declaration for stpncpy,
# with the result being a huge train wreck. Define _FORTIFY_SOURCE
# as 0 in an attempt to keep the trains on separate tracks.
#
install_gettext
#
# GLib depends on pkg-config.
# By default, pkg-config depends on GLib; we break the dependency cycle
# by configuring pkg-config to use its own internal version of GLib.
#
install_pkg_config
install_glib
#
# Now we have reached a point where we can build everything but
# the GUI (Wireshark).
#
install_qt
#
# Now we have reached a point where we can build everything including
# the GUI (Wireshark), but not with any optional features such as
# SNMP OID resolution, some forms of decryption, Lua scripting, playback
# of audio, or MaxMindDB mapping of IP addresses.
#
# We now conditionally download optional libraries to support them;
# the default is to download them all.
#
install_libsmi
install_libgpg_error
install_libgcrypt
install_gmp
install_libtasn1
install_p11_kit
install_nettle
install_gnutls
install_lua
install_snappy
install_zstd
install_libxml2
install_lz4
install_sbc
install_maxminddb
install_c_ares
install_libssh
install_nghttp2
install_nghttp3
install_libtiff
install_spandsp
install_speexdsp
install_bcg729
install_ilbc
install_opus
install_brotli
install_minizip
install_sparkle
}
uninstall_all() {
if [ -d "${MACOSX_SUPPORT_LIBS}" ]
then
cd "${MACOSX_SUPPORT_LIBS}"
#
# Uninstall items in the reverse order from the order in which they're
# installed. Only uninstall if the download/build/install process
# completed; uninstall the version that appears in the name of
# the -done file.
#
# We also do a "make distclean", so that we don't have leftovers from
# old configurations.
#
uninstall_sparkle
uninstall_minizip
uninstall_brotli
uninstall_opus
uninstall_ilbc
uninstall_bcg729
uninstall_speexdsp
uninstall_spandsp
uninstall_libtiff
uninstall_nghttp2
uninstall_nghttp3
uninstall_libssh
uninstall_c_ares
uninstall_maxminddb
uninstall_snappy
uninstall_zstd
uninstall_libxml2
uninstall_lz4
uninstall_sbc
uninstall_lua
uninstall_gnutls
uninstall_nettle
uninstall_p11_kit
uninstall_libtasn1
uninstall_gmp
uninstall_libgcrypt
uninstall_libgpg_error
uninstall_libsmi
uninstall_qt
uninstall_glib
uninstall_pkg_config
uninstall_gettext
uninstall_ninja
#
# XXX - really remove this?
# Or should we remember it as installed only if this script
# installed it?
#
uninstall_asciidoctorpdf
uninstall_asciidoctor
uninstall_pytest
uninstall_meson
uninstall_python3
uninstall_cmake
uninstall_libtool
uninstall_automake
uninstall_autoconf
uninstall_pcre
uninstall_lzip
uninstall_xz
uninstall_curl
fi
}
#
# Do we have permission to write in /usr/local?
#
# If so, assume we have permission to write in its subdirectories.
# (If that's not the case, this test needs to check the subdirectories
# as well.)
#
# If not, do "make install", "make uninstall", "ninja install",
# "ninja uninstall", the removes for dependencies that don't support
# "make uninstall" or "ninja uninstall", the renames of [g]libtool*,
# and the writing of a libffi .pc file with sudo.
#
if [ -w /usr/local ]
then
DO_MAKE_INSTALL="make install"
DO_MAKE_UNINSTALL="make uninstall"
DO_NINJA_INSTALL="ninja -C _build install"
DO_NINJA_UNINSTALL="ninja -C _build uninstall"
DO_TEE_TO_PC_FILE="tee"
DO_RM="rm"
DO_MV="mv"
else
DO_MAKE_INSTALL="sudo make install"
DO_MAKE_UNINSTALL="sudo make uninstall"
DO_NINJA_INSTALL="sudo ninja -C _build install"
DO_NINJA_UNINSTALL="sudo ninja -C _build uninstall"
DO_TEE_TO_PC_FILE="sudo tee"
DO_RM="sudo rm"
DO_MV="sudo mv"
fi
# This script is meant to be run in the source root. The following
# code will attempt to get you there, but is not perfect (particulary
# if someone copies the script).
topdir=`pwd`/`dirname $0`/..
cd $topdir
# Preference of the support libraries directory:
# ${MACOSX_SUPPORT_LIBS}
# ../macosx-support-libs
# ./macosx-support-libs (default if none exists)
if [ ! -d "${MACOSX_SUPPORT_LIBS}" ]; then
unset MACOSX_SUPPORT_LIBS
fi
if [ -d ../macosx-support-libs ]; then
MACOSX_SUPPORT_LIBS=${MACOSX_SUPPORT_LIBS-../macosx-support-libs}
else
MACOSX_SUPPORT_LIBS=${MACOSX_SUPPORT_LIBS-./macosx-support-libs}
fi
#
# If we have SDKs available, the default target OS is the major version
# of the one we're running; get that and strip off the third component
# if present.
#
for i in /Developer/SDKs \
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \
/Library/Developer/CommandLineTools/SDKs
do
if [ -d "$i" ]
then
min_osx_target=`sw_vers -productVersion | sed 's/\([0-9]*\)\.\([0-9]*\)\.[0-9]*/\1.\2/'`
break
fi
done
#
# Parse command-line flags:
#
# -h - print help.
# -t <target> - build libraries so that they'll work on the specified
# version of macOS and later versions.
# -u - do an uninstall.
# -n - download all packages, but don't build or install.
#
no_build=false
while getopts ht:un name
do
case $name in
u)
do_uninstall=yes
;;
n)
no_build=true
;;
t)
min_osx_target="$OPTARG"
;;
h|?)
echo "Usage: macos-setup.sh [ -t <target> ] [ -u ] [ -n ]" 1>&1
exit 0
;;
esac
done
#
# Get the version numbers of installed packages, if any.
#
if [ -d "${MACOSX_SUPPORT_LIBS}" ]
then
cd "${MACOSX_SUPPORT_LIBS}"
installed_xz_version=`ls xz-*-done 2>/dev/null | sed 's/xz-\(.*\)-done/\1/'`
installed_lzip_version=`ls lzip-*-done 2>/dev/null | sed 's/lzip-\(.*\)-done/\1/'`
installed_pcre_version=`ls pcre-*-done 2>/dev/null | sed 's/pcre-\(.*\)-done/\1/'`
installed_pcre2_version=$(ls pcre2-*-done 2>/dev/null | sed 's/pcre2-\(.*\)-done/\1/')
installed_autoconf_version=`ls autoconf-*-done 2>/dev/null | sed 's/autoconf-\(.*\)-done/\1/'`
installed_automake_version=`ls automake-*-done 2>/dev/null | sed 's/automake-\(.*\)-done/\1/'`
installed_libtool_version=`ls libtool-*-done 2>/dev/null | sed 's/libtool-\(.*\)-done/\1/'`
installed_cmake_version=`ls cmake-*-done 2>/dev/null | sed 's/cmake-\(.*\)-done/\1/'`
installed_ninja_version=`ls ninja-*-done 2>/dev/null | sed 's/ninja-\(.*\)-done/\1/'`
installed_asciidoctor_version=`ls asciidoctor-*-done 2>/dev/null | sed 's/asciidoctor-\(.*\)-done/\1/'`
installed_asciidoctorpdf_version=`ls asciidoctorpdf-*-done 2>/dev/null | sed 's/asciidoctorpdf-\(.*\)-done/\1/'`
installed_gettext_version=`ls gettext-*-done 2>/dev/null | sed 's/gettext-\(.*\)-done/\1/'`
installed_pkg_config_version=`ls pkg-config-*-done 2>/dev/null | sed 's/pkg-config-\(.*\)-done/\1/'`
installed_glib_version=`ls glib-*-done 2>/dev/null | sed 's/glib-\(.*\)-done/\1/'`
installed_qt_version=`ls qt-*-done 2>/dev/null | sed 's/qt-\(.*\)-done/\1/'`
installed_libsmi_version=`ls libsmi-*-done 2>/dev/null | sed 's/libsmi-\(.*\)-done/\1/'`
installed_libgpg_error_version=`ls libgpg-error-*-done 2>/dev/null | sed 's/libgpg-error-\(.*\)-done/\1/'`
installed_libgcrypt_version=`ls libgcrypt-*-done 2>/dev/null | sed 's/libgcrypt-\(.*\)-done/\1/'`
installed_gmp_version=`ls gmp-*-done 2>/dev/null | sed 's/gmp-\(.*\)-done/\1/'`
installed_libtasn1_version=`ls libtasn1-*-done 2>/dev/null | sed 's/libtasn1-\(.*\)-done/\1/'`
installed_p11_kit_version=`ls p11-kit-*-done 2>/dev/null | sed 's/p11-kit-\(.*\)-done/\1/'`
installed_nettle_version=`ls nettle-*-done 2>/dev/null | sed 's/nettle-\(.*\)-done/\1/'`
installed_gnutls_version=`ls gnutls-*-done 2>/dev/null | sed 's/gnutls-\(.*\)-done/\1/'`
installed_lua_version=`ls lua-*-done 2>/dev/null | sed 's/lua-\(.*\)-done/\1/'`
installed_snappy_version=`ls snappy-*-done 2>/dev/null | sed 's/snappy-\(.*\)-done/\1/'`
installed_zstd_version=`ls zstd-*-done 2>/dev/null | sed 's/zstd-\(.*\)-done/\1/'`
installed_libxml2_version=`ls libxml2-*-done 2>/dev/null | sed 's/libxml2-\(.*\)-done/\1/'`
installed_lz4_version=`ls lz4-*-done 2>/dev/null | sed 's/lz4-\(.*\)-done/\1/'`
installed_sbc_version=`ls sbc-*-done 2>/dev/null | sed 's/sbc-\(.*\)-done/\1/'`
installed_maxminddb_version=`ls maxminddb-*-done 2>/dev/null | sed 's/maxminddb-\(.*\)-done/\1/'`
installed_cares_version=`ls c-ares-*-done 2>/dev/null | sed 's/c-ares-\(.*\)-done/\1/'`
installed_libssh_version=`ls libssh-*-done 2>/dev/null | sed 's/libssh-\(.*\)-done/\1/'`
installed_nghttp2_version=`ls nghttp2-*-done 2>/dev/null | sed 's/nghttp2-\(.*\)-done/\1/'`
installed_nghttp3_version=`ls nghttp3-*-done 2>/dev/null | sed 's/nghttp3-\(.*\)-done/\1/'`
installed_libtiff_version=`ls tiff-*-done 2>/dev/null | sed 's/tiff-\(.*\)-done/\1/'`
installed_spandsp_version=`ls spandsp-*-done 2>/dev/null | sed 's/spandsp-\(.*\)-done/\1/'`
installed_speexdsp_version=`ls speexdsp-*-done 2>/dev/null | sed 's/speexdsp-\(.*\)-done/\1/'`
installed_bcg729_version=`ls bcg729-*-done 2>/dev/null | sed 's/bcg729-\(.*\)-done/\1/'`
installed_ilbc_version=`ls ilbc-*-done 2>/dev/null | sed 's/ilbc-\(.*\)-done/\1/'`
installed_opus_version=`ls opus-*-done 2>/dev/null | sed 's/opus-\(.*\)-done/\1/'`
installed_python3_version=`ls python3-*-done 2>/dev/null | sed 's/python3-\(.*\)-done/\1/'`
installed_brotli_version=`ls brotli-*-done 2>/dev/null | sed 's/brotli-\(.*\)-done/\1/'`
installed_minizip_version=`ls minizip-*-done 2>/dev/null | sed 's/minizip-\(.*\)-done/\1/'`
installed_sparkle_version=`ls sparkle-*-done 2>/dev/null | sed 's/sparkle-\(.*\)-done/\1/'`
cd $topdir
fi
if [ "$do_uninstall" = "yes" ]
then
uninstall_all
exit 0
fi
#
# Configure scripts tend to set CFLAGS and CXXFLAGS to "-g -O2" if
# invoked without CFLAGS or CXXFLAGS being set in the environment.
#
# However, we *are* setting them in the environment, for our own
# nefarious purposes, so start them out as "-g -O2".
#
CFLAGS="-g -O2"
CXXFLAGS="-g -O2"
# if no make options are present, set default options
if [ -z "$MAKE_BUILD_OPTS" ] ; then
# by default use 1.5x number of cores for parallel build
MAKE_BUILD_OPTS="-j $(( $(sysctl -n hw.logicalcpu) * 3 / 2))"
fi
#
# If we have a target release, look for the oldest SDK that's for an
# OS equal to or later than that one, and build libraries against it
# rather than against the headers and, more importantly, libraries
# that come with the OS, so that we don't end up with support libraries
# that only work on the OS version on which we built them, not earlier
# versions of the same release, or earlier releases if the minimum is
# earlier.
#
if [ ! -z "$min_osx_target" ]
then
#
# Get the major and minor version of the target release.
# We assume it'll be a while before there's a macOS 100. :-)
#
case "$min_osx_target" in
[1-9][0-9].*)
#
# major.minor.
#
min_osx_target_major=`echo "$min_osx_target" | sed -n 's/\([1-9][0-9]*\)\..*/\1/p'`
min_osx_target_minor=`echo "$min_osx_target" | sed -n 's/[1-9][0-9]*\.\(.*\)/\1/p'`
;;
[1-9][0-9])
#
# Just a major version number was specified; make the minor
# version 0.
#
min_osx_target_major="$min_osx_target"
min_osx_target_minor=0
;;
*)
echo "macosx-setup.sh: Invalid target release $min_osx_target" 1>&2
exit 1
;;
esac
#
# Search each directory that might contain SDKs.
#
sdkpath=""
for sdksdir in /Developer/SDKs \
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \
/Library/Developer/CommandLineTools/SDKs
do
#
# Get a list of all the SDKs.
#
if ! test -d "$sdksdir"
then
#
# There is no directory with that name.
# Move on to the next one in the list, if any.
#
continue
fi
#
# Get a list of all the SDKs in that directory, if any.
# We assume it'll be a while before there's a macOS 100. :-)
#
sdklist=`(cd "$sdksdir"; ls -d MacOSX[1-9][0-9].[0-9]*.sdk 2>/dev/null)`
for sdk in $sdklist
do
#
# Get the major and minor version for this SDK.
#
sdk_major=`echo "$sdk" | sed -n 's/MacOSX\([1-9][0-9]*\)\..*\.sdk/\1/p'`
sdk_minor=`echo "$sdk" | sed -n 's/MacOSX[1-9][0-9]*\.\(.*\)\.sdk/\1/p'`
#
# Is it for the deployment target or some later release?
# Starting with major 11, the minor version no longer matters.
#
if test "$sdk_major" -gt "$min_osx_target_major" -o \
\( "$sdk_major" -eq "$min_osx_target_major" -a \
\( "$sdk_major" -ge 11 -o \
"$sdk_minor" -ge "$min_osx_target_minor" \) \)
then
#
# Yes, use it.
#
sdkpath="$sdksdir/$sdk"
break 2
fi
done
done
if [ -z "$sdkpath" ]
then
echo "macos-setup.sh: Couldn't find an SDK for macOS $min_osx_target or later" 1>&2
exit 1
fi
SDKPATH="$sdkpath"
echo "Using the $sdk_major.$sdk_minor SDK"
#
# Make sure there are links to /usr/local/include and /usr/local/lib
# in the SDK's usr/local.
#
if [ ! -e $SDKPATH/usr/local/include ]
then
if [ ! -d $SDKPATH/usr/local ]
then
sudo mkdir $SDKPATH/usr/local
fi
sudo ln -s /usr/local/include $SDKPATH/usr/local/include
fi
if [ ! -e $SDKPATH/usr/local/lib ]
then
if [ ! -d $SDKPATH/usr/local ]
then
sudo mkdir $SDKPATH/usr/local
fi
sudo ln -s /usr/local/lib $SDKPATH/usr/local/lib
fi
#
# Set the minimum OS version for which to build to the specified
# minimum target OS version, so we don't, for example, end up using
# linker features supported by the OS verson on which we're building
# but not by the target version.
#
VERSION_MIN_FLAGS="-mmacosx-version-min=$min_osx_target"
#
# Compile and link against the SDK.
#
SDKFLAGS="-isysroot $SDKPATH"
fi
export CFLAGS
export CXXFLAGS
#
# You need Xcode or the command-line tools installed to get the compilers (xcrun checks both).
#
if [ ! -x /usr/bin/xcrun ]; then
echo "Please install Xcode (app or command line) first (should be available on DVD or from the Mac App Store)."
exit 1
fi
if [ "$QT_VERSION" ]; then
#
# We need Xcode, not just the command-line tools, installed to build
# Qt.
#
# At least with Xcode 8, /usr/bin/xcodebuild --help fails if only
# the command-line tools are installed and succeeds if Xcode is
# installed. Unfortunately, it fails *with* Xcode 3, but
# /usr/bin/xcodebuild -version works with that and with Xcode 8.
# Hopefully it fails with only the command-line tools installed.
#
if /usr/bin/xcodebuild -version >/dev/null 2>&1; then
:
elif qmake --version >/dev/null 2>&1; then
:
else
echo "Please install Xcode first (should be available on DVD or from the Mac App Store)."
echo "The command-line build tools are not sufficient to build Qt."
echo "Alternatively build QT according to: https://gist.github.com/shoogle/750a330c851bd1a924dfe1346b0b4a08#:~:text=MacOS%2FQt%5C%20Creator-,Go%20to%20Qt%20Creator%20%3E%20Preferences%20%3E%20Build%20%26%20Run%20%3E%20Kits,for%20both%20compilers%2C%20not%20gcc%20."
exit 1
fi
fi
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
#
# Do all the downloads and untarring in a subdirectory, so all that
# stuff can be removed once we've installed the support libraries.
if [ ! -d "${MACOSX_SUPPORT_LIBS}" ]
then
mkdir "${MACOSX_SUPPORT_LIBS}" || exit 1
fi
cd "${MACOSX_SUPPORT_LIBS}"
install_all
echo ""
#
# Indicate what paths to use for pkg-config and cmake.
#
pkg_config_path=/usr/local/lib/pkgconfig
if [ "$QT_VERSION" ]; then
qt_base_path=$HOME/Qt$QT_VERSION/$QT_VERSION/clang_64
pkg_config_path="$pkg_config_path":"$qt_base_path/lib/pkgconfig"
CMAKE_PREFIX_PATH="$CMAKE_PREFIX_PATH":"$qt_base_path/lib/cmake"
fi
if $no_build; then
echo "All required dependencies downloaded. Run without -n to install them."
exit 0
fi
if [ "$QT_VERSION" ]; then
if [ -f qt-$QT_VERSION-done ]; then
echo "You are now prepared to build Wireshark."
else
echo "Qt was not installed; you will have to install it in order to build the"
echo "Wireshark application, but you can build all the command-line tools in"
echo "the Wireshark distribution."
echo ""
echo "See section 2.1.1. \"Build environment setup\" of the Wireshark Developer's"
echo "Guide for instructions on how to install Qt."
fi
else
echo "You did not install Qt; you will have to install it in order to build"
echo "the Wireshark application, but you can build all the command-line tools in"
echo "the Wireshark distribution."
fi
echo
echo "To build:"
echo
echo "export PKG_CONFIG_PATH=$pkg_config_path"
echo "export CMAKE_PREFIX_PATH=$CMAKE_PREFIX_PATH"
echo "export PATH=$PATH:$qt_base_path/bin"
echo
echo "mkdir build; cd build"
if [ ! -z "$NINJA_VERSION" ]; then
echo "cmake -G Ninja .."
echo "ninja wireshark_app_bundle logray_app_bundle # (Modify as needed)"
echo "ninja install/strip"
else
echo "cmake .."
echo "make $MAKE_BUILD_OPTS wireshark_app_bundle logray_app_bundle # (Modify as needed)"
echo "make install/strip"
fi
echo
echo "Make sure you are allowed capture access to the network devices"
echo "See: https://gitlab.com/wireshark/wireshark/-/wikis/CaptureSetup/CapturePrivileges"
echo
exit 0
Reference in New Issue View Git Blame Copy Permalink