e61fe552d0
Johannes Berg pointed out this was the intent of the TLV definitions and supplied some code for implementing that. I simply made it work.
526 lines
22 KiB
C
526 lines
22 KiB
C
/*-
|
|
* Copyright (c) 2003, 2004 David Young. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
/*
|
|
* Modifications to fit into the linux IEEE 802.11 stack,
|
|
* Mike Kershaw (dragorn@kismetwireless.net)
|
|
*/
|
|
|
|
#ifndef IEEE80211RADIOTAP_H
|
|
#define IEEE80211RADIOTAP_H
|
|
|
|
#include <glib.h>
|
|
|
|
/* Base version of the radiotap packet header data */
|
|
#define PKTHDR_RADIOTAP_VERSION 0
|
|
|
|
/* A generic radio capture format is desirable. There is one for
|
|
* Linux, but it is neither rigidly defined (there were not even
|
|
* units given for some fields) nor easily extensible.
|
|
*
|
|
* I suggest the following extensible radio capture format. It is
|
|
* based on a bitmap indicating which fields are present.
|
|
*
|
|
* I am trying to describe precisely what the application programmer
|
|
* should expect in the following, and for that reason I tell the
|
|
* units and origin of each measurement (where it applies), or else I
|
|
* use sufficiently weaselly language ("is a monotonically nondecreasing
|
|
* function of...") that I cannot set false expectations for lawyerly
|
|
* readers.
|
|
*/
|
|
|
|
/* The radio capture header precedes the 802.11 header.
|
|
* All data in the header is little endian on all platforms.
|
|
*/
|
|
struct ieee80211_radiotap_header {
|
|
guint8 it_version; /* Version 0. Only increases
|
|
* for drastic changes,
|
|
* introduction of compatible
|
|
* new fields does not count.
|
|
*/
|
|
guint8 it_pad;
|
|
guint16 it_len; /* length of the whole
|
|
* header in bytes, including
|
|
* it_version, it_pad,
|
|
* it_len, and data fields.
|
|
*/
|
|
guint32 it_present; /* A bitmap telling which
|
|
* fields are present. Set bit 31
|
|
* (0x80000000) to extend the
|
|
* bitmap by another 32 bits.
|
|
* Additional extensions are made
|
|
* by setting bit 31.
|
|
*/
|
|
};
|
|
|
|
/* Name Data type Units
|
|
* ---- --------- -----
|
|
*
|
|
* IEEE80211_RADIOTAP_TSFT __le64 microseconds
|
|
*
|
|
* Value in microseconds of the MAC's 64-bit 802.11 Time
|
|
* Synchronization Function timer when the first bit of the
|
|
* MPDU arrived at the MAC. For received frames, only.
|
|
*
|
|
* IEEE80211_RADIOTAP_CHANNEL 2 x guint16 MHz, bitmap
|
|
*
|
|
* Tx/Rx frequency in MHz, followed by flags (see below).
|
|
*
|
|
* IEEE80211_RADIOTAP_FHSS guint16 see below
|
|
*
|
|
* For frequency-hopping radios, the hop set (first byte)
|
|
* and pattern (second byte).
|
|
*
|
|
* IEEE80211_RADIOTAP_RATE u8 500kb/s
|
|
*
|
|
* Tx/Rx data rate
|
|
*
|
|
* IEEE80211_RADIOTAP_DBM_ANTSIGNAL s8 decibels from
|
|
* one milliwatt (dBm)
|
|
*
|
|
* RF signal power at the antenna, decibel difference from
|
|
* one milliwatt.
|
|
*
|
|
* IEEE80211_RADIOTAP_DBM_ANTNOISE s8 decibels from
|
|
* one milliwatt (dBm)
|
|
*
|
|
* RF noise power at the antenna, decibel difference from one
|
|
* milliwatt.
|
|
*
|
|
* IEEE80211_RADIOTAP_DB_ANTSIGNAL u8 decibel (dB)
|
|
*
|
|
* RF signal power at the antenna, decibel difference from an
|
|
* arbitrary, fixed reference.
|
|
*
|
|
* IEEE80211_RADIOTAP_DB_ANTNOISE u8 decibel (dB)
|
|
*
|
|
* RF noise power at the antenna, decibel difference from an
|
|
* arbitrary, fixed reference point.
|
|
*
|
|
* IEEE80211_RADIOTAP_LOCK_QUALITY guint16 unitless
|
|
*
|
|
* Quality of Barker code lock. Unitless. Monotonically
|
|
* nondecreasing with "better" lock strength. Called "Signal
|
|
* Quality" in datasheets. (Is there a standard way to measure
|
|
* this?)
|
|
*
|
|
* IEEE80211_RADIOTAP_TX_ATTENUATION guint16 unitless
|
|
*
|
|
* Transmit power expressed as unitless distance from max
|
|
* power set at factory calibration. 0 is max power.
|
|
* Monotonically nondecreasing with lower power levels.
|
|
*
|
|
* IEEE80211_RADIOTAP_DB_TX_ATTENUATION guint16 decibels (dB)
|
|
*
|
|
* Transmit power expressed as decibel distance from max power
|
|
* set at factory calibration. 0 is max power. Monotonically
|
|
* nondecreasing with lower power levels.
|
|
*
|
|
* IEEE80211_RADIOTAP_DBM_TX_POWER s8 decibels from
|
|
* one milliwatt (dBm)
|
|
*
|
|
* Transmit power expressed as dBm (decibels from a 1 milliwatt
|
|
* reference). This is the absolute power level measured at
|
|
* the antenna port.
|
|
*
|
|
* IEEE80211_RADIOTAP_FLAGS u8 bitmap
|
|
*
|
|
* Properties of transmitted and received frames. See flags
|
|
* defined below.
|
|
*
|
|
* IEEE80211_RADIOTAP_ANTENNA u8 antenna index
|
|
*
|
|
* Unitless indication of the Rx/Tx antenna for this packet.
|
|
* The first antenna is antenna 0.
|
|
*
|
|
* IEEE80211_RADIOTAP_RX_FLAGS guint16 bitmap
|
|
*
|
|
* Properties of received frames. See flags defined below.
|
|
*
|
|
* IEEE80211_RADIOTAP_TX_FLAGS guint16 bitmap
|
|
*
|
|
* Properties of transmitted frames. See flags defined below.
|
|
*
|
|
* IEEE80211_RADIOTAP_RTS_RETRIES u8 data
|
|
*
|
|
* Number of rts retries a transmitted frame used.
|
|
*
|
|
* IEEE80211_RADIOTAP_DATA_RETRIES u8 data
|
|
*
|
|
* Number of unicast retries a transmitted frame used.
|
|
*
|
|
* IEEE80211_RADIOTAP_MCS u8, u8, u8 unitless
|
|
*
|
|
* Contains a bitmap of known fields/flags, the flags, and
|
|
* the MCS index.
|
|
*
|
|
* IEEE80211_RADIOTAP_AMPDU_STATUS u32, u16, u8, u8 unitlesss
|
|
*
|
|
* Contains the AMPDU information for the subframe.
|
|
*
|
|
* IEEE80211_RADIOTAP_HE u16, u16, u16, u16, u16, u16 unitless
|
|
* Contains some information for HE frames.
|
|
*
|
|
* IEEE80211_RADIOTAP_HE_MU U16, U16, u8[4] unitless
|
|
*
|
|
* IEEE80211_RADIOTAP_HE_MU_USER
|
|
*
|
|
* IEEE80211_RADIOTAP_0_LENGTH_PSDU
|
|
*
|
|
* IEEE80211_RADIOTAP_L_SIG
|
|
*
|
|
* IEEE80211_RADIOTAP_TLVS_PRESENT
|
|
*
|
|
* THERE ARE NO MORE BITS FREE! If you need a new radiotap header you must
|
|
* ask for a TLV value. See www.radiotap.org.
|
|
*
|
|
*/
|
|
enum ieee80211_radiotap_type {
|
|
IEEE80211_RADIOTAP_TSFT = 0,
|
|
IEEE80211_RADIOTAP_FLAGS = 1,
|
|
IEEE80211_RADIOTAP_RATE = 2,
|
|
IEEE80211_RADIOTAP_CHANNEL = 3,
|
|
IEEE80211_RADIOTAP_FHSS = 4,
|
|
IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
|
|
IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
|
|
IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
|
|
IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
|
|
IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
|
|
IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
|
|
IEEE80211_RADIOTAP_ANTENNA = 11,
|
|
IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
|
|
IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
|
|
IEEE80211_RADIOTAP_RX_FLAGS = 14,
|
|
IEEE80211_RADIOTAP_TX_FLAGS = 15,
|
|
IEEE80211_RADIOTAP_RTS_RETRIES = 16,
|
|
IEEE80211_RADIOTAP_DATA_RETRIES = 17,
|
|
IEEE80211_RADIOTAP_XCHANNEL = 18, /* Unofficial, used by FreeBSD */
|
|
IEEE80211_RADIOTAP_MCS = 19,
|
|
IEEE80211_RADIOTAP_AMPDU_STATUS = 20,
|
|
IEEE80211_RADIOTAP_VHT = 21,
|
|
IEEE80211_RADIOTAP_TIMESTAMP = 22,
|
|
IEEE80211_RADIOTAP_HE = 23,
|
|
IEEE80211_RADIOTAP_HE_MU = 24,
|
|
IEEE80211_RAFIOTAP_HE_MU_USER = 25,
|
|
IEEE80211_RADIOTAP_0_LENGTH_PSDU = 26,
|
|
IEEE80211_RADIOTAP_L_SIG = 27,
|
|
IEEE80211_RADIOTAP_TLVS = 28,
|
|
|
|
/* valid in every it_present bitmap, even vendor namespaces */
|
|
IEEE80211_RADIOTAP_RADIOTAP_NAMESPACE = 29,
|
|
IEEE80211_RADIOTAP_VENDOR_NAMESPACE = 30,
|
|
IEEE80211_RADIOTAP_EXT = 31
|
|
};
|
|
|
|
struct ieee80211_radiotap_tlv {
|
|
guint16 type;
|
|
guint16 datalen;
|
|
guint8 data[];
|
|
};
|
|
|
|
/* TLVs we understand. */
|
|
#define IEEE80211_RADIOTAP_TLV_S1G 32
|
|
#define IEEE80211_RADIOTAP_TLV_U_SIG 33
|
|
#define IEEE80211_RADIOTAP_TLV_EHT 34
|
|
|
|
/* Channel flags. */
|
|
/* 0x00000008 undefined (reserved?) */
|
|
#define IEEE80211_CHAN_700MHZ 0x00000001 /* S1G 700 MHz spectrum channel. */
|
|
#define IEEE80211_CHAN_800MHZ 0x00000002 /* S1G 800 MHz spectrum channel. */
|
|
#define IEEE80211_CHAN_900MHZ 0x00000004 /* S1G 900 MHz spectrum channel. */
|
|
#define IEEE80211_CHAN_TURBO 0x00000010 /* Turbo channel */
|
|
#define IEEE80211_CHAN_CCK 0x00000020 /* CCK channel */
|
|
#define IEEE80211_CHAN_OFDM 0x00000040 /* OFDM channel */
|
|
#define IEEE80211_CHAN_2GHZ 0x00000080 /* 2 GHz spectrum channel. */
|
|
#define IEEE80211_CHAN_5GHZ 0x00000100 /* 5 GHz spectrum channel */
|
|
#define IEEE80211_CHAN_PASSIVE 0x00000200 /* Only passive scan allowed */
|
|
#define IEEE80211_CHAN_DYN 0x00000400 /* Dynamic CCK-OFDM channel */
|
|
#define IEEE80211_CHAN_GFSK 0x00000800 /* GFSK channel (FHSS PHY) */
|
|
|
|
/* Additional XChannel flags. */
|
|
#define IEEE80211_CHAN_GSM 0x00001000 /* 900 MHz spectrum channel */
|
|
#define IEEE80211_CHAN_STURBO 0x00002000 /* 11a static turbo channel only */
|
|
#define IEEE80211_CHAN_HALF 0x00004000 /* Half rate channel */
|
|
#define IEEE80211_CHAN_QUARTER 0x00008000 /* Quarter rate channel */
|
|
#define IEEE80211_CHAN_HT20 0x00010000 /* HT 20 channel */
|
|
#define IEEE80211_CHAN_HT40U 0x00020000 /* HT 40 channel w/ ext above */
|
|
#define IEEE80211_CHAN_HT40D 0x00040000 /* HT 40 channel w/ ext below */
|
|
|
|
#define IEEE80211_CHAN_HT40 (IEEE80211_CHAN_HT40U | IEEE80211_CHAN_HT40D)
|
|
#define IEEE80211_CHAN_HT (IEEE80211_CHAN_HT20 | IEEE80211_CHAN_HT40)
|
|
#define IEEE80211_CHAN_S1G \
|
|
(IEEE80211_CHAN_700MHZ | IEEE80211_CHAN_800MHZ | \
|
|
IEEE80211_CHAN_900MHZ)
|
|
|
|
#define IEEE80211_CHAN_ALL \
|
|
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \
|
|
IEEE80211_CHAN_700MHZ | IEEE80211_CHAN_800MHZ | \
|
|
IEEE80211_CHAN_900MHZ | \
|
|
IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN | \
|
|
IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER | \
|
|
IEEE80211_CHAN_HT)
|
|
#define IEEE80211_CHAN_ALLTURBO \
|
|
(IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)
|
|
|
|
/* For IEEE80211_RADIOTAP_FLAGS */
|
|
#define IEEE80211_RADIOTAP_F_CFP 0x01 /* sent/received
|
|
* during CFP
|
|
*/
|
|
#define IEEE80211_RADIOTAP_F_SHORTPRE 0x02 /* sent/received
|
|
* with short
|
|
* preamble
|
|
*/
|
|
#define IEEE80211_RADIOTAP_F_WEP 0x04 /* sent/received
|
|
* with WEP encryption
|
|
*/
|
|
#define IEEE80211_RADIOTAP_F_FRAG 0x08 /* sent/received
|
|
* with fragmentation
|
|
*/
|
|
#define IEEE80211_RADIOTAP_F_FCS 0x10 /* frame includes FCS */
|
|
#define IEEE80211_RADIOTAP_F_DATAPAD 0x20 /* frame has padding between
|
|
* 802.11 header and payload
|
|
* (to 32-bit boundary)
|
|
*/
|
|
#define IEEE80211_RADIOTAP_F_BADFCS 0x40 /* frame failed FCS check */
|
|
|
|
/* For IEEE80211_RADIOTAP_RX_FLAGS */
|
|
#define IEEE80211_RADIOTAP_F_RX_BADPLCP 0x0002 /* bad PLCP */
|
|
|
|
/* For IEEE80211_RADIOTAP_TX_FLAGS */
|
|
#define IEEE80211_RADIOTAP_F_TX_FAIL 0x0001 /* failed due to excessive
|
|
* retries */
|
|
#define IEEE80211_RADIOTAP_F_TX_CTS 0x0002 /* used cts 'protection' */
|
|
#define IEEE80211_RADIOTAP_F_TX_RTS 0x0004 /* used rts/cts handshake */
|
|
#define IEEE80211_RADIOTAP_F_TX_NOACK 0x0008 /* don't expect ACK */
|
|
#define IEEE80211_RADIOTAP_F_TX_NOSEQNO 0x0010 /* don't overwrite sequence
|
|
* number */
|
|
#define IEEE80211_RADIOTAP_F_TX_ORDER 0x0020 /* don't reorder injected
|
|
* frames relative to other
|
|
* frames with this flag */
|
|
|
|
/* For IEEE80211_RADIOTAP_MCS */
|
|
#define IEEE80211_RADIOTAP_MCS_HAVE_BW 0x01
|
|
#define IEEE80211_RADIOTAP_MCS_HAVE_MCS 0x02
|
|
#define IEEE80211_RADIOTAP_MCS_HAVE_GI 0x04
|
|
#define IEEE80211_RADIOTAP_MCS_HAVE_FMT 0x08
|
|
#define IEEE80211_RADIOTAP_MCS_HAVE_FEC 0x10
|
|
#define IEEE80211_RADIOTAP_MCS_HAVE_STBC 0x20
|
|
#define IEEE80211_RADIOTAP_MCS_HAVE_NESS 0x40
|
|
#define IEEE80211_RADIOTAP_MCS_NESS_BIT1 0x80
|
|
|
|
#define IEEE80211_RADIOTAP_MCS_BW_MASK 0x03
|
|
#define IEEE80211_RADIOTAP_MCS_BW_20 0
|
|
#define IEEE80211_RADIOTAP_MCS_BW_40 1
|
|
#define IEEE80211_RADIOTAP_MCS_BW_20L 2
|
|
#define IEEE80211_RADIOTAP_MCS_BW_20U 3
|
|
#define IEEE80211_RADIOTAP_MCS_SGI 0x04
|
|
#define IEEE80211_RADIOTAP_MCS_FMT_GF 0x08
|
|
#define IEEE80211_RADIOTAP_MCS_FEC_LDPC 0x10
|
|
#define IEEE80211_RADIOTAP_MCS_STBC_MASK 0x60
|
|
#define IEEE80211_RADIOTAP_MCS_STBC_SHIFT 5
|
|
#define IEEE80211_RADIOTAP_MCS_STBC_1 1
|
|
#define IEEE80211_RADIOTAP_MCS_STBC_2 2
|
|
#define IEEE80211_RADIOTAP_MCS_STBC_3 3
|
|
#define IEEE80211_RADIOTAP_MCS_NESS_BIT0 0x80
|
|
|
|
/* For IEEE80211_RADIOTAP_AMPDU_STATUS */
|
|
#define IEEE80211_RADIOTAP_AMPDU_REPORT_ZEROLEN 0x0001
|
|
#define IEEE80211_RADIOTAP_AMPDU_IS_ZEROLEN 0x0002
|
|
#define IEEE80211_RADIOTAP_AMPDU_LAST_KNOWN 0x0004
|
|
#define IEEE80211_RADIOTAP_AMPDU_IS_LAST 0x0008
|
|
#define IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_ERR 0x0010
|
|
#define IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_KNOWN 0x0020
|
|
#define IEEE80211_RADIOTAP_AMPDU_EOF 0x0040
|
|
#define IEEE80211_RADIOTAP_AMPDU_EOF_KNOWN 0x0080
|
|
|
|
/* For IEEE80211_RADIOTAP_VHT */
|
|
#define IEEE80211_RADIOTAP_VHT_HAVE_STBC 0x0001
|
|
#define IEEE80211_RADIOTAP_VHT_HAVE_TXOP_PS 0x0002
|
|
#define IEEE80211_RADIOTAP_VHT_HAVE_GI 0x0004
|
|
#define IEEE80211_RADIOTAP_VHT_HAVE_SGI_NSYM_DA 0x0008
|
|
#define IEEE80211_RADIOTAP_VHT_HAVE_LDPC_EXTRA 0x0010
|
|
#define IEEE80211_RADIOTAP_VHT_HAVE_BF 0x0020
|
|
#define IEEE80211_RADIOTAP_VHT_HAVE_BW 0x0040
|
|
#define IEEE80211_RADIOTAP_VHT_HAVE_GID 0x0080
|
|
#define IEEE80211_RADIOTAP_VHT_HAVE_PAID 0x0100
|
|
#define IEEE80211_RADIOTAP_VHT_STBC 0x01
|
|
#define IEEE80211_RADIOTAP_VHT_TXOP_PS 0x02
|
|
#define IEEE80211_RADIOTAP_VHT_SGI 0x04
|
|
#define IEEE80211_RADIOTAP_VHT_SGI_NSYM_DA 0x08
|
|
#define IEEE80211_RADIOTAP_VHT_LDPC_EXTRA 0x10
|
|
#define IEEE80211_RADIOTAP_VHT_BF 0x20
|
|
#define IEEE80211_RADIOTAP_VHT_NSS 0x0f
|
|
#define IEEE80211_RADIOTAP_VHT_MCS 0xf0
|
|
#define IEEE80211_RADIOTAP_VHT_CODING_LDPC 0x01
|
|
|
|
#define IEEE80211_RADIOTAP_VHT_BW_MASK 0x1f
|
|
#define IEEE80211_RADIOTAP_VHT_BW_20 IEEE80211_RADIOTAP_MCS_BW_20
|
|
#define IEEE80211_RADIOTAP_VHT_BW_40 IEEE80211_RADIOTAP_MCS_BW_40
|
|
#define IEEE80211_RADIOTAP_VHT_BW_20L IEEE80211_RADIOTAP_MCS_BW_20L
|
|
#define IEEE80211_RADIOTAP_VHT_BW_20U IEEE80211_RADIOTAP_MCS_BW_20U
|
|
#define IEEE80211_RADIOTAP_VHT_BW_80 4
|
|
#define IEEE80211_RADIOTAP_VHT_BW_40L 5
|
|
#define IEEE80211_RADIOTAP_VHT_BW_40U 6
|
|
#define IEEE80211_RADIOTAP_VHT_BW_20LL 7
|
|
#define IEEE80211_RADIOTAP_VHT_BW_20LU 8
|
|
#define IEEE80211_RADIOTAP_VHT_BW_20UL 9
|
|
#define IEEE80211_RADIOTAP_VHT_BW_20UU 10
|
|
#define IEEE80211_RADIOTAP_VHT_BW_160 11
|
|
#define IEEE80211_RADIOTAP_VHT_BW_80L 12
|
|
#define IEEE80211_RADIOTAP_VHT_BW_80U 13
|
|
#define IEEE80211_RADIOTAP_VHT_BW_40LL 14
|
|
#define IEEE80211_RADIOTAP_VHT_BW_40LU 15
|
|
#define IEEE80211_RADIOTAP_VHT_BW_40UL 16
|
|
#define IEEE80211_RADIOTAP_VHT_BW_40UU 17
|
|
#define IEEE80211_RADIOTAP_VHT_BW_20LLL 18
|
|
#define IEEE80211_RADIOTAP_VHT_BW_20LLU 19
|
|
#define IEEE80211_RADIOTAP_VHT_BW_20LUL 20
|
|
#define IEEE80211_RADIOTAP_VHT_BW_20LUU 21
|
|
#define IEEE80211_RADIOTAP_VHT_BW_20ULL 22
|
|
#define IEEE80211_RADIOTAP_VHT_BW_20ULU 23
|
|
#define IEEE80211_RADIOTAP_VHT_BW_20UUL 24
|
|
#define IEEE80211_RADIOTAP_VHT_BW_20UUU 25
|
|
|
|
/* for IEEE80211_RADIOTAP_TIMESTAMP */
|
|
#define IEEE80211_RADIOTAP_TS_UNIT_MASK 0x0F
|
|
#define IEEE80211_RADIOTAP_TS_UNIT_MSEC 0x00
|
|
#define IEEE80211_RADIOTAP_TS_UNIT_USEC 0x01
|
|
#define IEEE80211_RADIOTAP_TS_UNIT_NSEC 0x02
|
|
#define IEEE80211_RADIOTAP_TS_SPOS_MASK 0xF0
|
|
#define IEEE80211_RADIOTAP_TS_SPOS_SHIFT 4
|
|
#define IEEE80211_RADIOTAP_TS_SPOS_MPDU 0x0
|
|
#define IEEE80211_RADIOTAP_TS_SPOS_ACQ 0x1
|
|
#define IEEE80211_RADIOTAP_TS_SPOS_EOF 0x2
|
|
#define IEEE80211_RADIOTAP_TS_SPOS_UNDEF 0xF
|
|
|
|
/* for IEEE80211_RADIOTAP_HE */
|
|
#define IEEE80211_RADIOTAP_HE_PPDU_FORMAT_MASK 0x0003
|
|
#define IEEE80211_RADIOTAP_HE_PPDU_FORMAT_HE_SU 0
|
|
#define IEEE80211_RADIOTAP_HE_PPDU_FORMAT_HE_EXT_SU 1
|
|
#define IEEE80211_RADIOTAP_HE_PPDU_FORMAT_HE_MU 2
|
|
#define IEEE80211_RADIOTAP_HE_PPDU_FORMAT_HE_TRIG 3
|
|
#define IEEE80211_RADIOTAP_HE_BSS_COLOR_KNOWN 0x0004
|
|
#define IEEE80211_RADIOTAP_HE_BEAM_CHANGE_KNOWN 0x0008
|
|
#define IEEE80211_RADIOTAP_HE_UL_DL_KNOWN 0x0010
|
|
#define IEEE80211_RADIOTAP_HE_DATA_MCS_KNOWN 0x0020
|
|
#define IEEE80211_RADIOTAP_HE_DATA_DCM_KNOWN 0x0040
|
|
#define IEEE80211_RADIOTAP_HE_CODING_KNOWN 0x0080
|
|
#define IEEE80211_RADIOTAP_HE_LDPC_EXTRA_SYMBOL_SEGMENT_KNOWN 0x0100
|
|
#define IEEE80211_RADIOTAP_HE_STBC_KNOWN 0x0200
|
|
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_KNOWN 0x0400
|
|
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_2_KNOWN 0x0800
|
|
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_3_KNOWN 0x1000
|
|
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_4_KNOWN 0x2000
|
|
#define IEEE80211_RADIOTAP_HE_DATA_BW_RU_ALLOCATION_KNOWN 0x4000
|
|
#define IEEE80211_RADIOTAP_HE_DOPPLER_KNOWN 0x8000
|
|
#define IEEE80211_RADIOTAP_HE_PRI_SEC_80_MHZ_KNOWN 0x0001
|
|
#define IEEE80211_RADIOTAP_HE_GI_KNOWN 0x0002
|
|
#define IEEE80211_RADIOTAP_HE_NUM_LTF_SYMBOLS_KNOWN 0x0004
|
|
#define IEEE80211_RADIOTAP_HE_PRE_FEC_PADDING_FACTOR_KNOWN 0x0008
|
|
#define IEEE80211_RADIOTAP_HE_TXBF_KNOWN 0x0010
|
|
#define IEEE80211_RADIOTAP_HE_PE_DISAMBIGUITY_KNOWN 0x0020
|
|
#define IEEE80211_RADIOTAP_HE_TXOP_KNOWN 0x0040
|
|
#define IEEE80211_RADIOTAP_HE_MIDAMBLE_PERIODICITY_KNOWN 0x0080
|
|
#define IEEE80211_RADIOTAP_HE_RU_ALLOCATION_OFFSET 0x3F00
|
|
#define IEEE80211_RADIOTAP_HE_RU_ALLOCATION_OFFSET_KNOWN 0x4000
|
|
#define IEEE80211_RADIOTAP_HE_PRI_SEC_80_MHZ 0x8000
|
|
#define IEEE80211_RADIOTAP_HE_BSS_COLOR_MASK 0x003F
|
|
#define IEEE80211_RADIOTAP_HE_BEAM_CHANGE 0x0040
|
|
#define IEEE80211_RADIOTAP_HE_UL_DL 0x0080
|
|
#define IEEE80211_RADIOTAP_HE_DATA_MCS_MASK 0x0F00
|
|
#define IEEE80211_RADIOTAP_HE_DATA_DCM 0x1000
|
|
#define IEEE80211_RADIOTAP_HE_CODING 0x2000
|
|
#define IEEE80211_RADIOTAP_HE_LDPC_EXTRA_SYMBOL_SEGMENT 0x4000
|
|
#define IEEE80211_RADIOTAP_HE_STBC 0x8000
|
|
/* HE_SU and HE_EXT_SU formap PPDU */
|
|
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_MASK 0x000F
|
|
#define IEEE80211_RADIOTAP_HE_D4_FFF0 0xFFF0
|
|
/* HE_TRIG format PPDU */
|
|
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_1_MASK 0X000F
|
|
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_2_MASK 0X00F0
|
|
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_3_MASK 0X0F00
|
|
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_4_MASK 0XF000
|
|
/* HE_MU format PPDU-also uses SPATIAL_REUSE_MASK from above */
|
|
#define IEEE80211_RADIOTAP_HE_STA_ID_MASK 0x7FF0
|
|
#define IEEE80211_RADIOTAP_HE_RESERVED_D4_B15 0x8000
|
|
|
|
#define IEEE80211_RADIOTAP_HE_DATA_BANDWIDTH_RU_ALLOC_MASK 0x000F
|
|
#define IEEE80211_RADIOTAP_HE_GI_MASK 0x0030
|
|
#define IEEE80211_RADIOTAP_HE_GI_0_POINT_8_MICRO 0
|
|
#define IEEE80211_RADIOTAP_HE_GI_1_POINT_6_MICRO 1
|
|
#define IEEE80211_RADIOTAP_HE_GI_3_POINT_2_MICRO 2
|
|
#define IEEE80211_RADIOTAP_HE_GI_RESERVED 3
|
|
#define IEEE80211_RADIOTAP_HE_LTF_SYMBOL_SIZE 0x00C0
|
|
#define IEEE80211_RADIOTAP_HE_NUM_LTF_SYMBOLS_MASK 0x0700
|
|
#define IEEE80211_RADIOTAP_HE_RESERVED_D5_B11 0x0800
|
|
#define IEEE80211_RADIOTAP_HE_PRE_FEC_PADDING_FACTOR_MASK 0x3000
|
|
#define IEEE80211_RADIOTAP_HE_TXBF 0x4000
|
|
#define IEEE80211_RADIOTAP_HE_PE_DISAMBIGUITY 0x8000
|
|
#define IEEE80211_RADIOTAP_HE_NSTS_MASK 0x000F
|
|
#define IEEE80211_RADIOTAP_HE_DOPLER_VALUE 0x0010
|
|
#define IEEE80211_RADIOTAP_HE_RESERVED_D6_00E0 0x00E0
|
|
#define IEEE80211_RADIOTAP_HE_TXOP_VALUE_MASK 0x7F00
|
|
#define IEEE80211_RADIOTAP_HE_MIDAMBLE_PERIODICITY 0x8000
|
|
|
|
/* For IEEE80211_RADIOTAP_HE_MU */
|
|
#define IEEE80211_RADIOTAP_HE_MU_SIG_B_MCS_MASK 0x000F
|
|
#define IEEE80211_RADIOTAP_HE_MU_SIG_B_MCS_KNOWN 0x0010
|
|
#define IEEE80211_RADIOTAP_HE_MU_SIG_B_DCM 0x0020
|
|
#define IEEE80211_RADIOTAP_HE_MU_SIG_B_DCM_KNOWN 0x0040
|
|
#define IEEE80211_RADIOTAP_HE_MU_CHAN2_CENTER_26_TONE_RU_BIT_KNOWN 0x0080
|
|
#define IEEE80211_RADIOTAP_HE_MU_CHAN1_RUS_KNOWN 0x0100
|
|
#define IEEE80211_RADIOTAP_HE_MU_CHAN2_RUS_KNOWN 0x0200
|
|
#define IEEE80211_RADIOTAP_HE_MU_RESERVED_F1_B10_B11 0x0C00
|
|
#define IEEE80211_RADIOTAP_HE_MU_CHAN1_CENTER_26_TONE_RU_BIT_KNOWN 0x1000
|
|
#define IEEE80211_RADIOTAP_HE_MU_CHAN1_CENTER_26_TONE_RU_VALUE 0x2000
|
|
#define IEEE80211_RADIOTAP_HE_MU_SIG_B_COMPRESSION_KNOWN 0x4000
|
|
#define IEEE80211_RADIOTAP_HE_MU_SYMBOL_CNT_OR_USER_CNT_KNOWN 0x8000
|
|
#define IEEE80211_RADIOTAP_HE_MU_BW_FROM_BW_IN_SIG_A_MASK 0x0003
|
|
#define IEEE80211_RADIOTAP_HE_MU_BW_FROM_BW_IN_SIG_A_KNOWN 0x0004
|
|
#define IEEE80211_RADIOTAP_HE_MU_SIG_B_COMPRESSION_FROM_SIG_A 0x0008
|
|
#define IEEE80211_RADIOTAP_HE_MU_SYMBOL_CNT_OR_USER_CNT 0x00F0
|
|
#define IEEE80211_RADIOTAP_HE_MU_PREAMBLE_PUNCTURING_MASK 0x0300
|
|
#define IEEE80211_RADIOTAP_HE_MU_PREAMBLE_PUNCTURING_KNOWN 0x0400
|
|
#define IEEE80211_RADIOTAP_HE_MU_CHAN2_CENTER_26_TONE_RU_VALUE 0x0800
|
|
#define IEEE80211_RADIOTAP_HE_MU_RESERVED_F2_B12_B15 0xF000
|
|
|
|
/* For IEEE80211_RADIOTAP_L_SIG */
|
|
#define IEEE80211_RADIOTAP_L_SIG_RATE_KNOWN 0x0001
|
|
#define IEEE80211_RADIOTAP_L_SIG_LENGTH_KNOWN 0x0002
|
|
#define IEEE80211_RADIOTAP_L_SIG_RESERVED_MASK 0xFFFC
|
|
#define IEEE80211_RADIOTAP_L_SIG_RATE_MASK 0x000F
|
|
#define IEEE80211_RADIOTAP_L_SIG_LENGTH_MASK 0xFFF0
|
|
|
|
/* TLV Definitions, start at 32 */
|
|
#define IEEE80211_RADIOTAP_TLV_S1G 32
|
|
|
|
/* For IEEE80211_RADIOTAP_TLV_S1G */
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_S1G_PPDU_FORMAT_KNOWN 0x0001
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_RESPONSE_INDICATION_KNOWN 0x0002
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_GUARD_INTERVAL_KNOWN 0x0004
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_NSS_KNOWN 0x0008
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_BANDWIDTH_KNOWN 0x0010
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_MCS_KNOWN 0x0020
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_COLOR_KNOWN 0x0040
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_UPLINK_INDICATION_KNOWN 0x0080
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_RESERVED_1 0xFF00
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_S1G_PPDU_FORMAT 0x0003
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_RESPONSE_INDICATION 0x000C
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_RESERVED_2 0x0010
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_GUARD_INTERVAL 0x0020
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_NSS 0x00C0
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_BANDWIDTH 0x0F00
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_MCS 0xF000
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_COLOR 0x0007
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_UPLINK_INDICATION 0x0008
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_RESERVED_3 0x00F0
|
|
#define IEEE80211_RADIOTAP_TLV_S1G_RSSI 0xFF00
|
|
|
|
#define IEEE80211_RADIOTAP_TS_FLG_32BIT 0x01
|
|
#define IEEE80211_RADIOTAP_TS_FLG_ACCURACY 0x02
|
|
|
|
#endif /* IEEE80211_RADIOTAP_H */
|