1842 lines
54 KiB
C
1842 lines
54 KiB
C
/* packet-h263.c
|
|
*
|
|
* Routines for ITU-T Recommendation H.263 dissection
|
|
*
|
|
* Copyright 2003 Niklas ™gren <niklas.ogren@7l.se>
|
|
* Seven Levels Consultants AB
|
|
*
|
|
* $Id$
|
|
*
|
|
* Wireshark - Network traffic analyzer
|
|
* By Gerald Combs <gerald@wireshark.org>
|
|
* Copyright 1998 Gerald Combs
|
|
*
|
|
* Copied structure from packet-h261.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
/*
|
|
* This dissector tries to dissect the H.263 protocol according to
|
|
* ITU-T Recommendations and RFC 2190,
|
|
* http://www.ietf.org/rfc/rfc4629.txt?number=4629
|
|
* and http://www.itu.int/rec/T-REC-H.263/en
|
|
*/
|
|
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
# include "config.h"
|
|
#endif
|
|
|
|
#include <glib.h>
|
|
#include <epan/packet.h>
|
|
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
|
|
#include <epan/emem.h>
|
|
#include <epan/rtp_pt.h>
|
|
#include <epan/iax2_codec_type.h>
|
|
|
|
#include "prefs.h"
|
|
|
|
static void dissect_h263_data( tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree );
|
|
|
|
/* H.263 header fields */
|
|
static int proto_h263 = -1;
|
|
static int proto_h263P = -1;
|
|
static int proto_h263_data = -1;
|
|
|
|
/* Mode A header */
|
|
static int hf_h263_ftype = -1;
|
|
static int hf_h263_pbframes = -1;
|
|
static int hf_h263_sbit = -1;
|
|
static int hf_h263_ebit = -1;
|
|
static int hf_h263_srcformat = -1;
|
|
static int hf_h263_picture_coding_type = -1;
|
|
static int hf_h263_unrestricted_motion_vector = -1;
|
|
static int hf_h263_syntax_based_arithmetic = -1;
|
|
static int hf_h263_advanced_prediction = -1;
|
|
static int hf_h263_r = -1;
|
|
static int hf_h263_rr = -1;
|
|
static int hf_h263_dbq = -1;
|
|
static int hf_h263_trb = -1;
|
|
static int hf_h263_tr = -1;
|
|
/* Additional fields for Mode B or C header */
|
|
static int hf_h263_quant = -1;
|
|
static int hf_h263_gobn = -1;
|
|
static int hf_h263_mba = -1;
|
|
static int hf_h263_hmv1 = -1;
|
|
static int hf_h263_vmv1 = -1;
|
|
static int hf_h263_hmv2 = -1;
|
|
static int hf_h263_vmv2 = -1;
|
|
/* Fields for the data section */
|
|
static int hf_h263_psc = -1;
|
|
static int hf_h263_gbsc = -1;
|
|
static int hf_h263_TR =-1;
|
|
static int hf_h263_split_screen_indicator = -1;
|
|
static int hf_h263_document_camera_indicator = -1;
|
|
static int hf_h263_full_picture_freeze_release = -1;
|
|
static int hf_h263_source_format = -1;
|
|
static int hf_h263_payload_picture_coding_type = -1;
|
|
static int hf_h263_opt_unres_motion_vector_mode = -1;
|
|
static int hf_h263_syntax_based_arithmetic_coding_mode = -1;
|
|
static int hf_h263_optional_advanced_prediction_mode = -1;
|
|
static int hf_h263_PB_frames_mode = -1;
|
|
static int hf_h263_data = -1;
|
|
static int hf_h263_payload = -1;
|
|
static int hf_h263_GN = -1;
|
|
static int hf_h263_UFEP = -1;
|
|
static int hf_h263_opptype = -1;
|
|
static int hf_h263_pquant = -1;
|
|
static int hf_h263_cpm = -1;
|
|
static int hf_h263_psbi = -1;
|
|
static int hf_h263_picture_type_code = -1;
|
|
static int hf_h263_ext_source_format = -1;
|
|
static int hf_h263_custom_pcf = -1;
|
|
static int hf_h263_pei = -1;
|
|
static int hf_h263_psupp = -1;
|
|
|
|
/* H.263 RFC 4629 fields */
|
|
static int hf_h263P_payload = -1;
|
|
static int hf_h263P_rr = -1;
|
|
static int hf_h263P_pbit = -1;
|
|
static int hf_h263P_vbit = -1;
|
|
static int hf_h263P_plen = -1;
|
|
static int hf_h263P_pebit = -1;
|
|
static int hf_h263P_tid = -1;
|
|
static int hf_h263P_trun = -1;
|
|
static int hf_h263P_s = -1;
|
|
static int hf_h263P_extra_hdr = -1;
|
|
static int hf_h263P_PSC = -1;
|
|
static int hf_h263P_TR = -1;
|
|
|
|
/* Source format types */
|
|
#define H263_SRCFORMAT_FORB 0 /* forbidden */
|
|
#define H263_SRCFORMAT_SQCIF 1
|
|
#define H263_SRCFORMAT_QCIF 2
|
|
#define H263_SRCFORMAT_CIF 3
|
|
#define H263_SRCFORMAT_4CIF 4
|
|
#define H263_SRCFORMAT_16CIF 5
|
|
#define H263_PLUSPTYPE 7
|
|
|
|
static const value_string srcformat_vals[] =
|
|
{
|
|
{ H263_SRCFORMAT_FORB, "forbidden" },
|
|
{ H263_SRCFORMAT_SQCIF, "sub-QCIF 128x96" },
|
|
{ H263_SRCFORMAT_QCIF, "QCIF 176x144" },
|
|
{ H263_SRCFORMAT_CIF, "CIF 352x288" },
|
|
{ H263_SRCFORMAT_4CIF, "4CIF 704x576" },
|
|
{ H263_SRCFORMAT_16CIF, "16CIF 1408x1152" },
|
|
{ 6, "Reserved",},
|
|
{ H263_PLUSPTYPE, "extended PTYPE" },
|
|
{ 0, NULL },
|
|
};
|
|
|
|
/*
|
|
* If UFEP is "001", then the following bits are present in PLUSPTYPE:
|
|
* Bits 1-3 Source Format, "000" reserved, "001" sub-QCIF, "010" QCIF, "011" CIF,
|
|
* "100" 4CIF, "101" 16CIF, "110" custom source format, "111" reserved;
|
|
*/
|
|
static const value_string ext_srcformat_vals[] =
|
|
{
|
|
{ 0, "reserved" },
|
|
{ H263_SRCFORMAT_SQCIF, "sub-QCIF 128x96" },
|
|
{ H263_SRCFORMAT_QCIF, "QCIF 176x144" },
|
|
{ H263_SRCFORMAT_CIF, "CIF 352x288" },
|
|
{ H263_SRCFORMAT_4CIF, "4CIF 704x576" },
|
|
{ H263_SRCFORMAT_16CIF, "16CIF 1408x1152" },
|
|
{ 6, "Custom source format",},
|
|
{ 7, "Reserved" },
|
|
{ 0, NULL },
|
|
};
|
|
|
|
static const value_string h263_ufep_vals[] =
|
|
{
|
|
{ 0, "Only MPPTYPE included" },
|
|
{ 1, "All extended PTYPE fields are included" },
|
|
{ 0, NULL },
|
|
};
|
|
|
|
static const true_false_string on_off_flg = {
|
|
"On",
|
|
"Off"
|
|
};
|
|
static const true_false_string picture_coding_type_flg = {
|
|
"INTER (P-picture)",
|
|
"INTRA (I-picture)"
|
|
};
|
|
|
|
static const value_string picture_coding_type_vals[] =
|
|
{
|
|
{ 0, "I-Frame" },
|
|
{ 1, "P-frame" },
|
|
{ 0, NULL },
|
|
};
|
|
|
|
static const true_false_string PB_frames_mode_flg = {
|
|
"PB-frame",
|
|
"Normal I- or P-picture"
|
|
};
|
|
|
|
static const true_false_string cpm_flg = {
|
|
"On",
|
|
"Off"
|
|
};
|
|
|
|
static const true_false_string custom_pcf_flg = {
|
|
"Custom PCF",
|
|
"CIF PCF"
|
|
};
|
|
|
|
/* Bits 1-3 Picture Type Code:*/
|
|
static const value_string picture_type_code_vals[] =
|
|
{
|
|
{ 0, "I-picture (INTRA)" },
|
|
{ 1, "P-picture (INTER)" },
|
|
{ 2, "Improved PB-frame (see Annex M)" },
|
|
{ 3, "B-picture (see Annex O)" },
|
|
{ 4, "EI-picture (see Annex O)" },
|
|
{ 5, "EP-picture (see Annex O)" },
|
|
{ 6, "Reserved" },
|
|
{ 7, "Reserved" },
|
|
{ 0, NULL },
|
|
};
|
|
|
|
/* H.263 fields defining a sub tree */
|
|
static gint ett_h263 = -1;
|
|
static gint ett_h263_payload = -1;
|
|
static gint ett_h263_optype = -1;
|
|
|
|
/* H.263-1998 fields defining a sub tree */
|
|
static gint ett_h263P = -1;
|
|
static gint ett_h263P_extra_hdr = -1;
|
|
static gint ett_h263P_payload = -1;
|
|
static gint ett_h263P_data = -1;
|
|
|
|
/* The dynamic payload type which will be dissected as H.263-1998/H263-2000 */
|
|
|
|
static guint dynamic_payload_type = 0;
|
|
static guint temp_dynamic_payload_type = 0;
|
|
|
|
static void
|
|
dissect_h263( tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree )
|
|
{
|
|
proto_item *ti = NULL;
|
|
proto_tree *h263_tree = NULL;
|
|
unsigned int offset = 0;
|
|
unsigned int h263_version = 0;
|
|
tvbuff_t *next_tvb;
|
|
|
|
h263_version = (tvb_get_guint8( tvb, offset ) & 0xc0 ) >> 6;
|
|
|
|
if ( check_col( pinfo->cinfo, COL_PROTOCOL ) ) {
|
|
col_set_str( pinfo->cinfo, COL_PROTOCOL, "H.263 " );
|
|
}
|
|
|
|
if( h263_version == 0x00) {
|
|
if ( check_col( pinfo->cinfo, COL_INFO) ) {
|
|
col_append_str( pinfo->cinfo, COL_INFO, "MODE A ");
|
|
}
|
|
}
|
|
else if( h263_version == 0x02) {
|
|
if ( check_col( pinfo->cinfo, COL_INFO) ) {
|
|
col_append_str( pinfo->cinfo, COL_INFO, "MODE B ");
|
|
}
|
|
}
|
|
else if( h263_version == 0x03) {
|
|
if ( check_col( pinfo->cinfo, COL_INFO) ) {
|
|
col_append_str( pinfo->cinfo, COL_INFO, "MODE C ");
|
|
}
|
|
}
|
|
|
|
if ( tree ) {
|
|
ti = proto_tree_add_item( tree, proto_h263, tvb, offset, -1, FALSE );
|
|
h263_tree = proto_item_add_subtree( ti, ett_h263 );
|
|
|
|
/* FBIT 1st octet, 1 bit */
|
|
proto_tree_add_boolean( h263_tree, hf_h263_ftype, tvb, offset, 1, tvb_get_guint8( tvb, offset ) & 0x80 );
|
|
/* PBIT 1st octet, 1 bit */
|
|
proto_tree_add_boolean( h263_tree, hf_h263_pbframes, tvb, offset, 1, tvb_get_guint8( tvb, offset ) & 0x40 );
|
|
/* SBIT 1st octet, 3 bits */
|
|
proto_tree_add_uint( h263_tree, hf_h263_sbit, tvb, offset, 1, ( tvb_get_guint8( tvb, offset ) & 0x38 ) >> 3 );
|
|
/* EBIT 1st octet, 3 bits */
|
|
proto_tree_add_uint( h263_tree, hf_h263_ebit, tvb, offset, 1, tvb_get_guint8( tvb, offset ) & 0x7 );
|
|
|
|
offset++;
|
|
|
|
/* SRC 2nd octet, 3 bits */
|
|
proto_tree_add_uint( h263_tree, hf_h263_srcformat, tvb, offset, 1, tvb_get_guint8( tvb, offset ) >> 5 );
|
|
|
|
if(h263_version == 0x00) { /* MODE A */
|
|
/* I flag, 1 bit */
|
|
proto_tree_add_boolean( h263_tree, hf_h263_picture_coding_type, tvb, offset, 1, tvb_get_guint8( tvb, offset ) & 0x10 );
|
|
/* U flag, 1 bit */
|
|
proto_tree_add_boolean( h263_tree, hf_h263_unrestricted_motion_vector, tvb, offset, 1, tvb_get_guint8( tvb, offset ) & 0x08 );
|
|
/* S flag, 1 bit */
|
|
proto_tree_add_boolean( h263_tree, hf_h263_syntax_based_arithmetic, tvb, offset, 1, tvb_get_guint8( tvb, offset ) & 0x04 );
|
|
/* A flag, 1 bit */
|
|
proto_tree_add_boolean( h263_tree, hf_h263_advanced_prediction, tvb, offset, 1, tvb_get_guint8( tvb, offset ) & 0x02 );
|
|
|
|
/* Reserved 2nd octect, 1 bit + 3rd octect 3 bits */
|
|
proto_tree_add_uint( h263_tree, hf_h263_r, tvb, offset, 2, ( ( tvb_get_guint8( tvb, offset ) & 0x1 ) << 3 ) + ( ( tvb_get_guint8( tvb, offset + 1 ) & 0xe0 ) >> 5 ) );
|
|
|
|
offset++;
|
|
|
|
/* DBQ 3 octect, 2 bits */
|
|
proto_tree_add_uint( h263_tree, hf_h263_dbq, tvb, offset, 1, ( tvb_get_guint8( tvb, offset ) & 0x18 ) >> 3 );
|
|
/* TRB 3 octect, 3 bits */
|
|
proto_tree_add_uint( h263_tree, hf_h263_trb, tvb, offset, 1, ( tvb_get_guint8( tvb, offset ) & 0x07 ) );
|
|
|
|
offset++;
|
|
|
|
/* TR 4 octect, 8 bits */
|
|
proto_tree_add_uint( h263_tree, hf_h263_tr, tvb, offset, 1, tvb_get_guint8( tvb, offset ) );
|
|
|
|
offset++;
|
|
|
|
} else { /* MODE B or MODE C */
|
|
|
|
/* QUANT 2 octect, 5 bits */
|
|
proto_tree_add_uint( h263_tree, hf_h263_quant, tvb, offset, 1, tvb_get_guint8( tvb, offset ) & 0x1f );
|
|
|
|
offset++;
|
|
|
|
/* GOBN 3 octect, 5 bits */
|
|
proto_tree_add_uint( h263_tree, hf_h263_gobn, tvb, offset, 1, ( tvb_get_guint8( tvb, offset ) & 0xf8 ) >> 3);
|
|
/* MBA 3 octect, 3 bits + 4 octect 6 bits */
|
|
proto_tree_add_uint( h263_tree, hf_h263_mba, tvb, offset, 2, ( ( tvb_get_guint8( tvb, offset ) & 0x7 ) << 6 ) + ( ( tvb_get_guint8( tvb, offset + 1 ) & 0xfc ) >> 2 ) );
|
|
|
|
offset++;
|
|
|
|
/* Reserved 4th octect, 2 bits */
|
|
proto_tree_add_uint( h263_tree, hf_h263_r, tvb, offset, 1, ( tvb_get_guint8( tvb, offset ) & 0x3 ) );
|
|
|
|
offset++;
|
|
|
|
/* I flag, 1 bit */
|
|
proto_tree_add_boolean( h263_tree, hf_h263_picture_coding_type, tvb, offset, 1, tvb_get_guint8( tvb, offset ) & 0x80 );
|
|
/* U flag, 1 bit */
|
|
proto_tree_add_boolean( h263_tree, hf_h263_unrestricted_motion_vector, tvb, offset, 1, tvb_get_guint8( tvb, offset ) & 0x40 );
|
|
/* S flag, 1 bit */
|
|
proto_tree_add_boolean( h263_tree, hf_h263_syntax_based_arithmetic, tvb, offset, 1, tvb_get_guint8( tvb, offset ) & 0x20 );
|
|
/* A flag, 1 bit */
|
|
proto_tree_add_boolean( h263_tree, hf_h263_advanced_prediction, tvb, offset, 1, tvb_get_guint8( tvb, offset ) & 0x10 );
|
|
|
|
/* HMV1 5th octect, 4 bits + 6th octect 3 bits*/
|
|
proto_tree_add_uint( h263_tree, hf_h263_hmv1, tvb, offset, 2,( ( tvb_get_guint8( tvb, offset ) & 0xf ) << 3 ) + ( ( tvb_get_guint8( tvb, offset+1 ) & 0xe0 ) >> 5) );
|
|
|
|
offset++;
|
|
|
|
/* VMV1 6th octect, 5 bits + 7th octect 2 bits*/
|
|
proto_tree_add_uint( h263_tree, hf_h263_vmv1, tvb, offset, 2,( ( tvb_get_guint8( tvb, offset ) & 0x1f ) << 2 ) + ( ( tvb_get_guint8( tvb, offset+1 ) & 0xc0 ) >> 6) );
|
|
|
|
offset++;
|
|
|
|
/* HMV2 7th octect, 6 bits + 8th octect 1 bit*/
|
|
proto_tree_add_uint( h263_tree, hf_h263_hmv2, tvb, offset, 2,( ( tvb_get_guint8( tvb, offset ) & 0x3f ) << 1 ) + ( ( tvb_get_guint8( tvb, offset+1 ) & 0xf0 ) >> 7) );
|
|
|
|
offset++;
|
|
|
|
/* VMV2 8th octect, 7 bits*/
|
|
proto_tree_add_uint( h263_tree, hf_h263_vmv2, tvb, offset, 1, tvb_get_guint8( tvb, offset ) & 0x7f );
|
|
|
|
offset++;
|
|
|
|
if(h263_version == 0x03) { /* MODE C */
|
|
/* Reserved 9th to 11th octect, 8 + 8 + 3 bits */
|
|
proto_tree_add_uint( h263_tree, hf_h263_rr, tvb, offset, 3, ( tvb_get_guint8( tvb, offset ) << 11 ) + ( tvb_get_guint8( tvb, offset + 1 ) << 3 ) + ( ( tvb_get_guint8( tvb, offset + 2 ) & 0xe0 ) >> 5 ) );
|
|
|
|
offset+=2;
|
|
|
|
/* DBQ 11th octect, 2 bits */
|
|
proto_tree_add_uint( h263_tree, hf_h263_dbq, tvb, offset, 1, ( tvb_get_guint8( tvb, offset ) & 0x18 ) >>3 );
|
|
/* TRB 11th octect, 3 bits */
|
|
proto_tree_add_uint( h263_tree, hf_h263_trb, tvb, offset, 1, tvb_get_guint8( tvb, offset ) & 0x07 );
|
|
|
|
offset++;
|
|
|
|
/* TR 12th octect, 8 bits */
|
|
proto_tree_add_uint( h263_tree, hf_h263_tr, tvb, offset, 1, tvb_get_guint8( tvb, offset ) );
|
|
|
|
offset++;
|
|
} /* end mode c */
|
|
} /* end not mode a */
|
|
|
|
/* The rest of the packet is the H.263 stream */
|
|
next_tvb = tvb_new_subset( tvb, offset, tvb_length(tvb) - offset, tvb_reported_length(tvb) - offset);
|
|
dissect_h263_data( next_tvb, pinfo, h263_tree );
|
|
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* 5.3 Macroblock layer
|
|
static int
|
|
dissect_h263_macroblock_layer( tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, gint offset)
|
|
{
|
|
|
|
}
|
|
*/
|
|
|
|
|
|
static int
|
|
dissect_h263_group_of_blocks_layer( tvbuff_t *tvb, proto_tree *tree, gint offset, gboolean is_rfc4626)
|
|
{
|
|
|
|
unsigned int offset_in_bits = offset << 3;
|
|
|
|
if(is_rfc4626){
|
|
/* GBSC 1xxx xxxx */
|
|
proto_tree_add_bits_item(tree, hf_h263_gbsc, tvb, offset_in_bits, 1, FALSE);
|
|
offset_in_bits++;
|
|
}else{
|
|
/* Group of Block Start Code (GBSC) (17 bits)
|
|
* A word of 17 bits. Its value is 0000 0000 0000 0000 1.
|
|
*/
|
|
proto_tree_add_bits_item(tree, hf_h263_gbsc, tvb, offset_in_bits, 17, FALSE);
|
|
offset_in_bits = offset_in_bits +17;
|
|
}
|
|
/*
|
|
* Group Number (GN) (5 bits)
|
|
*/
|
|
proto_tree_add_bits_item(tree, hf_h263_GN, tvb, offset_in_bits, 5, FALSE);
|
|
offset_in_bits = offset_in_bits +5;
|
|
/* 5.2.4 GOB Sub-Bitstream Indicator (GSBI) (2 bits)
|
|
* A fixed length codeword of 2 bits that is only present if CPM is "1" in the picture header.
|
|
*/
|
|
/*
|
|
* 5.2.5 GOB Frame ID (GFID) (2 bits)
|
|
*/
|
|
/*
|
|
* 5.2.6 Quantizer Information (GQUANT) (5 bits)
|
|
*/
|
|
/*
|
|
* 5.3 Macroblock layer
|
|
*/
|
|
|
|
return offset_in_bits>>3;
|
|
}
|
|
|
|
|
|
/*
|
|
* Length is used for the "Extra header" otherwise set to -1.
|
|
*/
|
|
static int
|
|
dissect_h263_picture_layer( tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, gint offset, gint length _U_, gboolean is_rfc4626)
|
|
{
|
|
proto_tree *h263_opptype_tree = NULL;
|
|
proto_item *opptype_item = NULL;
|
|
unsigned int offset_in_bits = offset << 3;
|
|
guint64 source_format;
|
|
guint64 ufep;
|
|
guint64 picture_coding_type;
|
|
guint64 PB_frames_mode = 0;
|
|
guint64 custom_pcf = 0;
|
|
guint64 picture_type_code =0;
|
|
guint64 cpm;
|
|
guint64 pei;
|
|
|
|
if(is_rfc4626){
|
|
/* PC 1000 00xx */
|
|
proto_tree_add_bits_item(tree, hf_h263_psc, tvb, offset_in_bits, 6, FALSE);
|
|
offset_in_bits = offset_in_bits +6;
|
|
|
|
}else{
|
|
/* Check for PSC, PSC is a word of 22 bits.
|
|
* Its value is 0000 0000 0000 0000' 1000 00xx xxxx xxxx.
|
|
*/
|
|
proto_tree_add_bits_item(tree, hf_h263_psc, tvb, offset_in_bits, 22, FALSE);
|
|
offset_in_bits = offset_in_bits +22;
|
|
|
|
}
|
|
proto_tree_add_bits_item(tree, hf_h263_TR, tvb, offset_in_bits, 8, FALSE);
|
|
offset_in_bits = offset_in_bits +8;
|
|
/*
|
|
* Bit 1: Always "1", in order to avoid start code emulation.
|
|
* Bit 2: Always "0", for distinction with Recommendation H.261.
|
|
*/
|
|
offset_in_bits = offset_in_bits +2;
|
|
/* Bit 3: Split screen indicator, "0" off, "1" on. */
|
|
proto_tree_add_bits_item( tree, hf_h263_split_screen_indicator, tvb, offset_in_bits, 1, FALSE);
|
|
offset_in_bits++;
|
|
/* Bit 4: Document camera indicator, */
|
|
proto_tree_add_bits_item( tree, hf_h263_document_camera_indicator, tvb, offset_in_bits, 1, FALSE);
|
|
offset_in_bits++;
|
|
/* Bit 5: Full Picture Freeze Release, "0" off, "1" on. */
|
|
proto_tree_add_bits_item( tree, hf_h263_full_picture_freeze_release, tvb, offset_in_bits, 1, FALSE);
|
|
offset_in_bits++;
|
|
/* Bits 6-8: Source Format, "000" forbidden, "001" sub-QCIF, "010" QCIF, "011" CIF,
|
|
* "100" 4CIF, "101" 16CIF, "110" reserved, "111" extended PTYPE.
|
|
*/
|
|
proto_tree_add_bits_ret_val( tree, hf_h263_source_format, tvb, offset_in_bits, 3 ,&source_format, FALSE);
|
|
offset_in_bits = offset_in_bits +3;
|
|
if (source_format != H263_PLUSPTYPE){
|
|
/* Not extended PTYPE */
|
|
/* Bit 9: Picture Coding Type, "0" INTRA (I-picture), "1" INTER (P-picture). */
|
|
proto_tree_add_bits_ret_val( tree, hf_h263_payload_picture_coding_type, tvb, offset_in_bits, 1, &picture_coding_type, FALSE);
|
|
if ( check_col( pinfo->cinfo, COL_INFO) )
|
|
col_append_str(pinfo->cinfo, COL_INFO, val_to_str((guint32)picture_coding_type, picture_coding_type_vals, "Unknown (%u)"));
|
|
offset_in_bits++;
|
|
/* Bit 10: Optional Unrestricted Motion Vector mode (see Annex D), "0" off, "1" on. */
|
|
proto_tree_add_bits_item( tree, hf_h263_opt_unres_motion_vector_mode, tvb, offset_in_bits, 1, FALSE);
|
|
offset_in_bits++;
|
|
/* Bit 11: Optional Syntax-based Arithmetic Coding mode (see Annex E), "0" off, "1" on.*/
|
|
proto_tree_add_bits_item( tree, hf_h263_syntax_based_arithmetic_coding_mode, tvb, offset_in_bits, 1, FALSE);
|
|
offset_in_bits++;
|
|
/* Bit 12: Optional Advanced Prediction mode (see Annex F), "0" off, "1" on.*/
|
|
proto_tree_add_bits_item( tree, hf_h263_optional_advanced_prediction_mode, tvb, offset_in_bits, 1, FALSE);
|
|
offset_in_bits++;
|
|
/* Bit 13: Optional PB-frames mode (see Annex G), "0" normal I- or P-picture, "1" PB-frame.*/
|
|
proto_tree_add_bits_ret_val( tree, hf_h263_PB_frames_mode, tvb, offset_in_bits, 1, &PB_frames_mode, FALSE);
|
|
offset_in_bits++;
|
|
}else{
|
|
/* Extended PTYPE
|
|
* Update Full Extended PTYPE (UFEP) (3 bits)
|
|
*/
|
|
/* .... ..xx x... .... */
|
|
proto_tree_add_bits_ret_val( tree, hf_h263_UFEP, tvb, offset_in_bits, 3, &ufep, FALSE);
|
|
offset_in_bits = offset_in_bits +3;
|
|
if(ufep==1){
|
|
/* The Optional Part of PLUSPTYPE (OPPTYPE) (18 bits)
|
|
*/
|
|
/* .xxx xxxx xxxx xxxx xxx. .... */
|
|
opptype_item = proto_tree_add_bits_item( tree, hf_h263_opptype, tvb, offset_in_bits, 18, FALSE);
|
|
h263_opptype_tree = proto_item_add_subtree( opptype_item, ett_h263_optype );
|
|
/*
|
|
* If UFEP is "001", then the following bits are present in PLUSPTYPE:
|
|
* Bits 1-3 Source Format, "000" reserved, "001" sub-QCIF, "010" QCIF, "011" CIF,
|
|
* "100" 4CIF, "101" 16CIF, "110" custom source format, "111" reserved;
|
|
*/
|
|
proto_tree_add_bits_item( h263_opptype_tree, hf_h263_ext_source_format, tvb, offset_in_bits, 3, FALSE);
|
|
offset_in_bits = offset_in_bits +3;
|
|
|
|
/*
|
|
* Bit 4 Optional Custom PCF, "0" CIF PCF, "1" custom PCF;
|
|
*/
|
|
proto_tree_add_bits_ret_val( h263_opptype_tree, hf_h263_custom_pcf, tvb, offset_in_bits, 3, &custom_pcf, FALSE);
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 5 Optional Unrestricted Motion Vector (UMV) mode (see Annex D), "0" off, "1" on;
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 6 Optional Syntax-based Arithmetic Coding (SAC) mode (see Annex E), "0" off, "1" on;
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 7 Optional Advanced Prediction (AP) mode (see Annex F), "0" off, "1" on;
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 8 Optional Advanced INTRA Coding (AIC) mode (see Annex I), "0" off, "1" on;
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 9 Optional Deblocking Filter (DF) mode (see Annex J), "0" off, "1" on;
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 10 Optional Slice Structured (SS) mode (see Annex K), "0" off, "1" on;
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 11 Optional Reference Picture Selection (RPS) mode (see Annex N), "0" off, "1" on;
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 12 Optional Independent Segment Decoding (ISD) mode (see Annex R), "0" off,"1" on;
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 13 Optional Alternative INTER VLC (AIV) mode (see Annex S), "0" off, "1" on;
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 14 Optional Modified Quantization (MQ) mode (see Annex T), "0" off, "1" on;
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 15 Equal to "1" to prevent start code emulation;
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 16 Reserved, shall be equal to "0";
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 17 Reserved, shall be equal to "0";
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 18 Reserved, shall be equal to "0".
|
|
*/
|
|
offset_in_bits++;
|
|
}
|
|
/*
|
|
* 5.1.4.3 The mandatory part of PLUSPTYPE when PLUSPTYPE present (MPPTYPE) (9 bits)
|
|
* Regardless of the value of UFEP, the following 9 bits are also present in PLUSPTYPE:
|
|
* - Bits 1-3 Picture Type Code:
|
|
* "000" I-picture (INTRA);
|
|
* "001" P-picture (INTER);
|
|
* "010" Improved PB-frame (see Annex M);
|
|
* "011" B-picture (see Annex O);
|
|
* "100" EI-picture (see Annex O);
|
|
* "101" EP-picture (see Annex O);
|
|
* "110" Reserved;
|
|
* "111" Reserved;
|
|
*/
|
|
proto_tree_add_bits_ret_val( tree, hf_h263_picture_type_code, tvb, offset_in_bits, 3, &picture_type_code, FALSE);
|
|
offset_in_bits = offset_in_bits +3;
|
|
/*
|
|
* Bit 4 Optional Reference Picture Resampling (RPR) mode (see Annex P), "0" off, "1" on;
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 5 Optional Reduced-Resolution Update (RRU) mode (see Annex Q), "0" off, "1" on;
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 6 Rounding Type (RTYPE) (see 6.1.2);
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 7 Reserved, shall be equal to "0";
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 8 Reserved, shall be equal to "0";
|
|
*/
|
|
offset_in_bits++;
|
|
/*
|
|
* Bit 9 Equal to "1" to prevent start code emulation.
|
|
*/
|
|
offset_in_bits++;
|
|
/* The picture header location of CPM (1 bit) and PSBI (2 bits)
|
|
* the picture header depends on whether or not PLUSPTYPE is present
|
|
* (see 5.1.20 and 5.1.21). If PLUSPTYPE is present, then CPM follows
|
|
* immediately after PLUSPTYPE in the picture header.
|
|
*/
|
|
proto_tree_add_bits_ret_val( tree, hf_h263_cpm, tvb, offset_in_bits, 1, &cpm, FALSE);
|
|
offset_in_bits++;
|
|
/* 5.1.21 Picture Sub-Bitstream Indicator (PSBI) (2 bits)
|
|
* only present if Continuous Presence Multipoint and Video
|
|
* Multiplex mode is indicated by CPM.
|
|
*/
|
|
if(cpm==1){
|
|
proto_tree_add_bits_item( tree, hf_h263_psbi, tvb, offset_in_bits, 2, FALSE);
|
|
offset_in_bits = offset_in_bits +2;
|
|
}
|
|
/* TODO Add the rest of the fields */
|
|
/* 5.1.5 Custom Picture Format (CPFMT) (23 bits)
|
|
* present only if the use of a custom picture format is
|
|
* signalled in PLUSPTYPE and UFEP is '001'. When present, CPFMT consists of:
|
|
* Bits 1-4 Pixel Aspect Ratio Code: A 4-bit index to the PAR value in Table 5. For
|
|
* extended PAR, the exact pixel aspect ratio shall be specified in EPAR
|
|
* (see 5.1.6);
|
|
* Bits 5-13 Picture Width Indication: Range [0, ... , 511]; Number of pixels per
|
|
* line = (PWI + 1) * 4;
|
|
* Bit 14 Equal to "1" to prevent start code emulation;
|
|
* Bits 15-23 Picture Height Indication: Range [1, ... , 288]; Number of lines = PHI * 4.
|
|
*/
|
|
/* 5.1.6 Extended Pixel Aspect Ratio (EPAR) (16 bits)
|
|
* A fixed length codeword of 16 bits that is present only if CPFMT is present and extended PAR is
|
|
* indicated therein. When present, EPAR consists of:
|
|
* Bits 1-8 PAR Width: "0" is forbidden. The natural binary representation of the PAR
|
|
* width;
|
|
* Bits 9-16 PAR Height: "0" is forbidden. The natural binary representation of the PAR
|
|
* height.
|
|
*/
|
|
/* 5.1.7 Custom Picture Clock Frequency Code (CPCFC) (8 bits)
|
|
* A fixed length codeword of 8 bits that is present only if PLUSPTYPE is present and UFEP is 001
|
|
* and a custom picture clock frequency is signalled in PLUSPTYPE. When present, CPCFC consists of:
|
|
* Bit 1 Clock Conversion Code: "0" indicates a clock conversion factor of 1000 and
|
|
* "1" indicates 1001;
|
|
* Bits 2-8 Clock Divisor: "0" is forbidden. The natural binary representation of the value
|
|
* of the clock divisor.
|
|
*/
|
|
/* 5.1.8 Extended Temporal Reference (ETR) (2 bits)
|
|
* A fixed length codeword of 2 bits which is present only if a custom picture clock frequency is in
|
|
* use (regardless of the value of UFEP). It is the two MSBs of the 10-bit number defined in 5.1.2.
|
|
*/
|
|
/* 5.1.9 Unlimited Unrestricted Motion Vectors Indicator (UUI) (Variable length)
|
|
* A variable length codeword of 1 or 2 bits that is present only if the optional Unrestricted Motion
|
|
* Vector mode is indicated in PLUSPTYPE and UFEP is 001. When UUI is present it indicates the
|
|
* effective limitation of the range of the motion vectors being used.
|
|
* UUI = "1" The motion vector range is limited according to Tables D.1 and D.2.
|
|
* UUI = "01" The motion vector range is not limited except by the picture size.
|
|
*/
|
|
/*
|
|
* 5.1.10 Slice Structured Submode bits (SSS) (2 bits)
|
|
* A fixed length codeword of 2 bits which is present only if the optional Slice Structured mode
|
|
* (see Annex K) is indicated in PLUSPTYPE and UFEP is 001. If the Slice Structured mode is in use
|
|
* but UFEP is not 001, the last values sent for SSS shall remain in effect.
|
|
* - Bit 1 Rectangular Slices, "0" indicates free-running slices, "1" indicates rectangular
|
|
* slices;
|
|
* - Bit 2 Arbitrary Slice Ordering, "0" indicates sequential order, "1" indicates arbitrary
|
|
* order.
|
|
* 5.1.11 Enhancement Layer Number (ELNUM) (4 bits)
|
|
* A fixed length codeword of 4 bits which is present only if the optional Temporal, SNR, and Spatial
|
|
* Scalability mode is in use (regardless of the value of UFEP). The particular enhancement layer is
|
|
* identified by an enhancement layer number, ELNUM. Picture correspondence between layers is
|
|
* achieved via the temporal reference. Picture size is either indicated within each enhancement layer
|
|
* using the existing source format fields or is inferred by the relationship to the reference layer. The
|
|
* first enhancement layer above the base layer is designated as Enhancement Layer Number 2, and
|
|
* the base layer has number 1.
|
|
* 5.1.12 Reference Layer Number (RLNUM) (4 bits)
|
|
* A fixed length codeword of 4 bits which is present only if the optional Temporal, SNR, and Spatial
|
|
* Scalability mode is in use (see Annex O) and UFEP is 001. The layer number for the pictures used
|
|
* as reference anchors is identified by a Reference Layer Number (RLNUM). Time correspondence
|
|
* between layers is achieved via the temporal reference.
|
|
* Note that for B-pictures in an enhancement layer having temporally surrounding EI- or EP-pictures
|
|
* which are present in the same enhancement layer, RLNUM shall be equal to ELNUM
|
|
* (see Annex O).
|
|
* 5.1.13 Reference Picture Selection Mode Flags (RPSMF) (3 bits)
|
|
* A fixed length codeword of 3 bits that is present only if the Reference Picture Selection mode is in
|
|
* use and UFEP is 001. When present, RPSMF indicates which type of back-channel messages are
|
|
* needed by the encoder. If the Reference Picture Selection mode is in use but RPSMF is not present,
|
|
* the last value of RPSMF that was sent shall remain in effect.
|
|
* - 100: neither ACK nor NACK signals needed;
|
|
* - 101: need ACK signals to be returned;
|
|
* - 110: need NACK signals to be returned;
|
|
* - 111: need both ACK and NACK signals to be returned;
|
|
* - 000-011: Reserved.
|
|
* 5.1.14 Temporal Reference for Prediction Indication (TRPI) (1 bit)
|
|
* A fixed length codeword of 1 bit that is present only if the optional Reference Picture Selection
|
|
* mode is in use (regardless of the value of UFEP). When present, TRPI indicates the presence of the
|
|
* following TRP field:
|
|
* - 0: TRP field is not present;
|
|
* - 1: TRP field is present.
|
|
* TRPI shall be 0 whenever the picture header indicates an I- or EI-picture.
|
|
* 5.1.15 Temporal Reference for Prediction (TRP) (10 bits)
|
|
* When present (as indicated in TRPI), TRP indicates the Temporal Reference which is used for
|
|
* prediction of the encoding, except for in the case of B-pictures. For B-pictures, the picture having
|
|
* the temporal reference TRP is used for the prediction in the forward direction. (Prediction in the
|
|
* reverse-temporal direction always uses the immediately temporally subsequent picture.) TRP is a
|
|
* ten-bit number. If a custom picture clock frequency was not in use for the reference picture, the two
|
|
* MSBs of TRP are zero and the LSBs contain the eight-bit TR found in the picture header of the
|
|
* reference picture. If a custom picture clock frequency was in use for the reference picture, TRP is a
|
|
* ten-bit number consisting of the concatenation of ETR and TR from the reference picture header.
|
|
* When TRP is not present, the most recent temporally previous anchor picture shall be used for
|
|
* prediction, as when not in the Reference Picture Selection mode. TRP is valid until the next PSC,
|
|
* GSC, or SSC.
|
|
* 5.1.16 Back-Channel message Indication (BCI) (Variable length)
|
|
* A variable length field of one or two bits that is present only if the optional Reference Picture
|
|
* Selection mode is in use. When set to "1", this signals the presence of the following optional video
|
|
* Back-Channel Message (BCM) field. "01" indicates the absence or the end of the video backchannel
|
|
* message field. Combinations of BCM and BCI may not be present, and may be repeated
|
|
* when present. BCI shall be set to "01" if the videomux submode of the optional Reference Picture
|
|
* Selection mode is not in use.
|
|
* 5.1.17 Back-Channel Message (BCM) (Variable length)
|
|
* The Back-Channel message with syntax as specified in N.4.2, which is present only if the preceding
|
|
* BCI field is present and is set to "1".
|
|
* 5.1.18 Reference Picture Resampling Parameters (RPRP) (Variable length)
|
|
* A variable length field that is present only if the optional Reference Picture Resampling mode bit is
|
|
* set in PLUSPTYPE. This field carries the parameters of the Reference Picture Resampling mode
|
|
* (see Annex P). Note that the Reference Picture Resampling mode can also be invoked implicitly by
|
|
* the occurrence of a picture header for an INTER coded picture having a picture size which differs
|
|
* from that of the previous encoded picture, in which case the RPRP field is not present and the
|
|
* Reference Picture Resampling mode bit is not set.
|
|
*/
|
|
}
|
|
/* 5.1.19 Quantizer Information (PQUANT) (5 bits) */
|
|
proto_tree_add_bits_item( tree, hf_h263_pquant, tvb, offset_in_bits, 5, FALSE);
|
|
offset_in_bits = offset_in_bits +5;
|
|
if (source_format != H263_PLUSPTYPE){
|
|
proto_tree_add_bits_ret_val( tree, hf_h263_cpm, tvb, offset_in_bits, 1, &cpm, FALSE);
|
|
offset_in_bits++;
|
|
/* 5.1.21 Picture Sub-Bitstream Indicator (PSBI) (2 bits)
|
|
* only present if Continuous Presence Multipoint and Video
|
|
* Multiplex mode is indicated by CPM.
|
|
*/
|
|
if(cpm==1){
|
|
proto_tree_add_bits_item( tree, hf_h263_psbi, tvb, offset_in_bits, 2, FALSE);
|
|
offset_in_bits = offset_in_bits +2;
|
|
}
|
|
}
|
|
/* 5.1.22 Temporal Reference for B-pictures in PB-frames (TRB) (3/5 bits)
|
|
* TRB is present if PTYPE or PLUSPTYPE indicates "PB-frame" or "Improved PB-frame"
|
|
* It is 3 bits long for standard CIF picture clock frequency and is
|
|
* extended to 5 bits when a custom picture clock frequency is in use.
|
|
*/
|
|
if((PB_frames_mode == 1)||(picture_type_code == 2 )){
|
|
if(custom_pcf == 0){
|
|
proto_tree_add_bits_item( tree, hf_h263_trb, tvb, offset_in_bits, 3, FALSE);
|
|
offset_in_bits = offset_in_bits +3;
|
|
}else{
|
|
proto_tree_add_bits_item( tree, hf_h263_trb, tvb, offset_in_bits, 5, FALSE);
|
|
offset_in_bits = offset_in_bits +5;
|
|
}
|
|
}
|
|
/* 5.1.23 Quantization information for B-pictures in PB-frames (DBQUANT) (2 bits)
|
|
* DBQUANT is present if PTYPE or PLUSPTYPE indicates "PB-frame" or "Improved PB-frame"
|
|
*/
|
|
if((PB_frames_mode == 1)||(picture_type_code == 2 )){
|
|
offset_in_bits = offset_in_bits +2;
|
|
}
|
|
/* 5.1.24 Extra Insertion Information (PEI) (1 bit)
|
|
* A bit which when set to "1" signals the presence of the following optional data field.
|
|
*/
|
|
proto_tree_add_bits_ret_val( tree, hf_h263_pei, tvb, offset_in_bits, 1, &pei, FALSE);
|
|
while(pei==1)
|
|
{
|
|
/*5.1.25 Supplemental Enhancement Information (PSUPP) (0/8/16 ... bits)
|
|
* If PEI is set to "1", then 9 bits follow consisting of 8 bits of data (PSUPP) and then another PEI bit
|
|
* to indicate if a further 9 bits follow and so on. Encoders shall use PSUPP as specified in Annex L.
|
|
*/
|
|
proto_tree_add_bits_item( tree, hf_h263_psupp, tvb, offset_in_bits, 8, FALSE);
|
|
offset_in_bits = offset_in_bits +8;
|
|
proto_tree_add_bits_ret_val( tree, hf_h263_pei, tvb, offset_in_bits, 1, &pei, FALSE);
|
|
|
|
}
|
|
/* For the first GOB in each picture (with number 0), no GOB header shall be transmitted.
|
|
* For all other GOBs, the GOB header may be empty, depending on the encoder strategy.
|
|
*/
|
|
|
|
/*
|
|
* 5.3 Macroblock layer
|
|
* dissect_h263_macroblock_layer( tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, gint offset)
|
|
*/
|
|
|
|
return offset_in_bits>>3;
|
|
|
|
}
|
|
|
|
/* RFC 4629 */
|
|
static void
|
|
dissect_h263P( tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree )
|
|
{
|
|
proto_item *ti = NULL;
|
|
proto_item *data_item = NULL;
|
|
proto_item *extra_hdr_item = NULL;
|
|
proto_tree *h263P_tree = NULL;
|
|
proto_tree *h263P_extr_hdr_tree = NULL;
|
|
proto_tree *h263P_data_tree = NULL;
|
|
unsigned int offset = 0;
|
|
unsigned int start_offset = 0;
|
|
guint16 data16, plen;
|
|
guint8 startcode;
|
|
|
|
/*
|
|
tvbuff_t *next_tvb;
|
|
*/
|
|
|
|
if ( check_col( pinfo->cinfo, COL_PROTOCOL ) ) {
|
|
col_set_str( pinfo->cinfo, COL_PROTOCOL, "H.263 RFC4629 " );
|
|
}
|
|
|
|
if ( tree ) {
|
|
ti = proto_tree_add_item( tree, proto_h263P, tvb, offset, -1, FALSE );
|
|
h263P_tree = proto_item_add_subtree( ti, ett_h263P );
|
|
/* Add it as hidden to make a filter of h263 possible here as well */
|
|
proto_tree_add_item_hidden( tree, proto_h263, tvb, offset, -1, FALSE );
|
|
|
|
data16 = tvb_get_ntohs(tvb,offset);
|
|
proto_tree_add_item( h263P_tree, hf_h263P_rr, tvb, offset, 2, FALSE );
|
|
proto_tree_add_item( h263P_tree, hf_h263P_pbit, tvb, offset, 2, FALSE );
|
|
proto_tree_add_item( h263P_tree, hf_h263P_vbit, tvb, offset, 2, FALSE );
|
|
proto_tree_add_item( h263P_tree, hf_h263P_plen, tvb, offset, 2, FALSE );
|
|
proto_tree_add_item( h263P_tree, hf_h263P_pebit, tvb, offset, 2, FALSE );
|
|
offset = offset +2;
|
|
/*
|
|
* V: 1 bit
|
|
*
|
|
* Indicates the presence of an 8-bit field containing information
|
|
* for Video Redundancy Coding (VRC), which follows immediately after
|
|
* the initial 16 bits of the payload header, if present. For syntax
|
|
* and semantics of that 8-bit VRC field, see Section 5.2.
|
|
*/
|
|
|
|
if ((data16&0x0200)==0x0200){
|
|
/* V bit = 1
|
|
* The format of the VRC header extension is as follows:
|
|
*
|
|
* 0 1 2 3 4 5 6 7
|
|
* +-+-+-+-+-+-+-+-+
|
|
* | TID | Trun |S|
|
|
* +-+-+-+-+-+-+-+-+
|
|
*
|
|
* TID: 3 bits
|
|
*
|
|
* Thread ID. Up to 7 threads are allowed. Each frame of H.263+ VRC
|
|
* data will use as reference information only sync frames or frames
|
|
* within the same thread. By convention, thread 0 is expected to be
|
|
* the "canonical" thread, which is the thread from which the sync frame
|
|
* should ideally be used. In the case of corruption or loss of the
|
|
* thread 0 representation, a representation of the sync frame with a
|
|
* higher thread number can be used by the decoder. Lower thread
|
|
* numbers are expected to contain representations of the sync frames
|
|
* equal to or better than higher thread numbers in the absence of data
|
|
* corruption or loss. See [Vredun] for a detailed discussion of VRC.
|
|
*
|
|
* Trun: 4 bits
|
|
*
|
|
* Monotonically increasing (modulo 16) 4-bit number counting the packet
|
|
* number within each thread.
|
|
*
|
|
* S: 1 bit
|
|
*
|
|
* A bit that indicates that the packet content is for a sync frame.
|
|
* :
|
|
*/
|
|
proto_tree_add_item( h263P_tree, hf_h263P_tid, tvb, offset, 1, FALSE );
|
|
proto_tree_add_item( h263P_tree, hf_h263P_trun, tvb, offset, 1, FALSE );
|
|
proto_tree_add_item( h263P_tree, hf_h263P_s, tvb, offset, 1, FALSE );
|
|
offset++;
|
|
}
|
|
|
|
/* Length, in bytes, of the extra picture header. */
|
|
plen = (data16 & 0x01f8) >> 3;
|
|
if (plen != 0){
|
|
start_offset = offset;
|
|
extra_hdr_item = proto_tree_add_item( h263P_tree, hf_h263P_extra_hdr, tvb, offset, plen, FALSE );
|
|
h263P_extr_hdr_tree = proto_item_add_subtree( extra_hdr_item, ett_h263P_extra_hdr );
|
|
|
|
dissect_h263_picture_layer( tvb, pinfo, h263P_extr_hdr_tree, offset, plen, TRUE);
|
|
|
|
offset = start_offset + plen;
|
|
}
|
|
if ((data16&0x0400)!=0){
|
|
/* P bit = 1 */
|
|
data_item = proto_tree_add_item( h263P_tree, hf_h263P_payload, tvb, offset, -1, FALSE );
|
|
h263P_data_tree = proto_item_add_subtree( data_item, ett_h263P_data );
|
|
/* Startc code holds bit 17 -23 of the codeword */
|
|
startcode = tvb_get_guint8(tvb,offset)&0xfe;
|
|
if (startcode & 0x80){
|
|
/* All picture, slice, and EOSBS start codes
|
|
* shall be byte aligned, and GOB and EOS start codes may be byte aligned.
|
|
*/
|
|
switch(startcode){
|
|
case 0xf8:
|
|
/* End Of Sub-Bitstream code (EOSBS)
|
|
* EOSBS codes shall be byte aligned
|
|
* ( 1111 100. )
|
|
*/
|
|
break;
|
|
case 0x80:
|
|
case 0x82:
|
|
/* Picture Start Code (PSC)
|
|
* ( 1000 00x.)
|
|
*/
|
|
if(check_col( pinfo->cinfo, COL_INFO))
|
|
col_append_str( pinfo->cinfo, COL_INFO, "(PSC) ");
|
|
offset = dissect_h263_picture_layer( tvb, pinfo, h263P_data_tree, offset, -1, TRUE);
|
|
break;
|
|
case 0xfc:
|
|
case 0xfe:
|
|
/* End Of Sequence (EOS)
|
|
* ( 1111 11x. )
|
|
*/
|
|
default:
|
|
/* Group of Block Start Code (GBSC) or
|
|
* Slice Start Code (SSC)
|
|
*/
|
|
if ( check_col( pinfo->cinfo, COL_INFO) )
|
|
col_append_str( pinfo->cinfo, COL_INFO, "(GBSC) ");
|
|
dissect_h263_group_of_blocks_layer( tvb, h263P_data_tree, offset,TRUE);
|
|
break;
|
|
}
|
|
}else{
|
|
/* Error */
|
|
}
|
|
return;
|
|
}
|
|
proto_tree_add_item( h263P_tree, hf_h263P_payload, tvb, offset, -1, FALSE );
|
|
}
|
|
}
|
|
/*
|
|
5.1.1 Picture Start Code (PSC) (22 bits)
|
|
PSC is a word of 22 bits. Its value is 0000 0000 0000 0000 1 00000. All picture start codes shall be
|
|
byte aligned.
|
|
( 1000 00xx)
|
|
|
|
End Of Sequence (EOS) (22 bits)
|
|
A codeword of 22 bits. Its value is 0000 0000 0000 0000 1 11111.
|
|
( 1111 11xx )
|
|
|
|
Group of Block Start Code (GBSC) (17 bits)
|
|
A word of 17 bits. Its value is 0000 0000 0000 0000 1.
|
|
( 1xxx xxxx )
|
|
|
|
End Of Sub-Bitstream code (EOSBS) (23 bits)
|
|
The EOSBS code is a codeword of 23 bits. Its value is 0000 0000 0000 0000 1 11110 0.
|
|
( 1111 100x )
|
|
|
|
Slice Start Code (SSC) (17 bits)
|
|
A word of 17 bits. Its value is 0000 0000 0000 0000 1.
|
|
( 1xxx xxxx )
|
|
*/
|
|
static void dissect_h263_data( tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree )
|
|
{
|
|
guint offset = 0;
|
|
proto_item *h263_payload_item = NULL;
|
|
proto_tree *h263_payload_tree = NULL;
|
|
guint32 data;
|
|
guint8 startcode;
|
|
|
|
if ( check_col( pinfo->cinfo, COL_INFO) ) {
|
|
col_append_str( pinfo->cinfo, COL_INFO, "H263 payload ");
|
|
}
|
|
|
|
if( tree ) {
|
|
h263_payload_item = proto_tree_add_item( tree, hf_h263_payload, tvb, offset, -1, FALSE );
|
|
h263_payload_tree = proto_item_add_subtree( h263_payload_item, ett_h263_payload );
|
|
}
|
|
|
|
/* Check for PSC, PSC is a word of 22 bits. Its value is 0000 0000 0000 0000' 1000 00xx xxxx xxxx. */
|
|
data = tvb_get_ntohl(tvb, offset);
|
|
|
|
if (( data & 0xffff8000) == 0x00008000 ) {
|
|
/* Start Code found
|
|
*
|
|
* Startc code holds bit 17 -23 of the codeword
|
|
*/
|
|
startcode = tvb_get_guint8(tvb,offset+2)&0xfe;
|
|
if (startcode & 0x80){
|
|
switch(startcode){
|
|
case 0xf8:
|
|
/* End Of Sub-Bitstream code (EOSBS)
|
|
* ( 1111 100. )
|
|
*/
|
|
break;
|
|
case 0x80:
|
|
case 0x82:
|
|
/* Picture Start Code (PSC)
|
|
* ( 1000 00x.)
|
|
*/
|
|
if(check_col( pinfo->cinfo, COL_INFO))
|
|
col_append_str( pinfo->cinfo, COL_INFO, "(PSC) ");
|
|
offset = dissect_h263_picture_layer( tvb, pinfo, h263_payload_tree, offset, -1, FALSE);
|
|
break;
|
|
case 0xfc:
|
|
case 0xfe:
|
|
/* End Of Sequence (EOS)
|
|
* ( 1111 11x. )
|
|
*/
|
|
default:
|
|
/* Group of Block Start Code (GBSC) or
|
|
* Slice Start Code (SSC)
|
|
*/
|
|
if ( check_col( pinfo->cinfo, COL_INFO) )
|
|
col_append_str( pinfo->cinfo, COL_INFO, "(GBSC) ");
|
|
offset = dissect_h263_group_of_blocks_layer( tvb, h263_payload_tree, offset,FALSE);
|
|
break;
|
|
}
|
|
}else{
|
|
/* Error */
|
|
}
|
|
}
|
|
if( tree )
|
|
proto_tree_add_item( h263_payload_tree, hf_h263_data, tvb, offset, -1, FALSE );
|
|
}
|
|
|
|
void
|
|
proto_reg_handoff_h263(void)
|
|
{
|
|
dissector_handle_t h263_handle;
|
|
|
|
h263_handle = find_dissector("h263");
|
|
dissector_add("rtp.pt", PT_H263, h263_handle);
|
|
dissector_add("iax2.codec", AST_FORMAT_H263, h263_handle);
|
|
}
|
|
|
|
void
|
|
proto_reg_handoff_h263P(void)
|
|
{
|
|
dissector_handle_t h263P_handle;
|
|
static int h263P_prefs_initialized = FALSE;
|
|
|
|
h263P_handle = create_dissector_handle(dissect_h263P, proto_h263P);
|
|
|
|
if (!h263P_prefs_initialized) {
|
|
h263P_prefs_initialized = TRUE;
|
|
}
|
|
else {
|
|
if ( dynamic_payload_type > 95 )
|
|
dissector_delete("rtp.pt", dynamic_payload_type, h263P_handle);
|
|
}
|
|
dynamic_payload_type = temp_dynamic_payload_type;
|
|
|
|
if ( dynamic_payload_type > 95 ){
|
|
dissector_add("rtp.pt", dynamic_payload_type, h263P_handle);
|
|
}
|
|
|
|
h263P_handle = find_dissector("h263P");
|
|
dissector_add_string("rtp_dyn_payload_type","H263-1998", h263P_handle);
|
|
dissector_add_string("rtp_dyn_payload_type","H263-2000", h263P_handle);
|
|
}
|
|
|
|
void
|
|
proto_register_h263(void)
|
|
{
|
|
static hf_register_info hf[] =
|
|
{
|
|
{
|
|
&hf_h263_ftype,
|
|
{
|
|
"F",
|
|
"h263.ftype",
|
|
FT_BOOLEAN,
|
|
BASE_NONE,
|
|
NULL,
|
|
0x0,
|
|
"Indicates the mode of the payload header (MODE A or B/C)", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_pbframes,
|
|
{
|
|
"p/b frame",
|
|
"h263.pbframes",
|
|
FT_BOOLEAN,
|
|
BASE_NONE,
|
|
NULL,
|
|
0x0,
|
|
"Optional PB-frames mode as defined by H.263 (MODE C)", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_sbit,
|
|
{
|
|
"Start bit position",
|
|
"h263.sbit",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"Start bit position specifies number of most significant bits that shall be ignored in the first data byte.", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_ebit,
|
|
{
|
|
"End bit position",
|
|
"h263.ebit",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"End bit position specifies number of least significant bits that shall be ignored in the last data byte.", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_srcformat,
|
|
{
|
|
"SRC format",
|
|
"h263.srcformat",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
VALS(srcformat_vals),
|
|
0x0,
|
|
"Source format specifies the resolution of the current picture.", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_picture_coding_type,
|
|
{
|
|
"Inter-coded frame",
|
|
"h263.picture_coding_type",
|
|
FT_BOOLEAN,
|
|
BASE_NONE,
|
|
NULL,
|
|
0x0,
|
|
"Picture coding type, intra-coded (false) or inter-coded (true)", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_unrestricted_motion_vector,
|
|
{
|
|
"Motion vector",
|
|
"h263.unrestricted_motion_vector",
|
|
FT_BOOLEAN,
|
|
BASE_NONE,
|
|
NULL,
|
|
0x0,
|
|
"Unrestricted Motion Vector option for current picture", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_syntax_based_arithmetic,
|
|
{
|
|
"Syntax-based arithmetic coding",
|
|
"h263.syntax_based_arithmetic",
|
|
FT_BOOLEAN,
|
|
BASE_NONE,
|
|
NULL,
|
|
0x0,
|
|
"Syntax-based Arithmetic Coding option for current picture", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_advanced_prediction,
|
|
{
|
|
"Advanced prediction option",
|
|
"h263.advanced_prediction",
|
|
FT_BOOLEAN,
|
|
BASE_NONE,
|
|
NULL,
|
|
0x0,
|
|
"Advanced Prediction option for current picture", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_dbq,
|
|
{
|
|
"Differential quantization parameter",
|
|
"h263.dbq",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"Differential quantization parameter used to calculate quantizer for the B frame based on quantizer for the P frame, when PB-frames option is used.", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_trb,
|
|
{
|
|
"Temporal Reference for B frames",
|
|
"h263.trb",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"Temporal Reference for the B frame as defined by H.263", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_tr,
|
|
{
|
|
"Temporal Reference for P frames",
|
|
"h263.tr",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"Temporal Reference for the P frame as defined by H.263", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_quant,
|
|
{
|
|
"Quantizer",
|
|
"h263.quant",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"Quantization value for the first MB coded at the starting of the packet.", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_gobn,
|
|
{
|
|
"GOB Number",
|
|
"h263.gobn",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"GOB number in effect at the start of the packet.", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_mba,
|
|
{
|
|
"Macroblock address",
|
|
"h263.mba",
|
|
FT_UINT16,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"The address within the GOB of the first MB in the packet, counting from zero in scan order.", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_hmv1,
|
|
{
|
|
"Horizontal motion vector 1",
|
|
"h263.hmv1",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"Horizontal motion vector predictor for the first MB in this packet ", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_vmv1,
|
|
{
|
|
"Vertical motion vector 1",
|
|
"h263.vmv1",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"Vertical motion vector predictor for the first MB in this packet ", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_hmv2,
|
|
{
|
|
"Horizontal motion vector 2",
|
|
"h263.hmv2",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"Horizontal motion vector predictor for block number 3 in the first MB in this packet when four motion vectors are used with the advanced prediction option.", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_vmv2,
|
|
{
|
|
"Vertical motion vector 2",
|
|
"h263.vmv2",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"Vertical motion vector predictor for block number 3 in the first MB in this packet when four motion vectors are used with the advanced prediction option.", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_r,
|
|
{
|
|
"Reserved field",
|
|
"h263.r",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"Reserved field that houls contain zeroes", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_rr,
|
|
{
|
|
"Reserved field 2",
|
|
"h263.rr",
|
|
FT_UINT16,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"Reserved field that should contain zeroes", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_payload,
|
|
{
|
|
"H.263 payload",
|
|
"h263.payload",
|
|
FT_NONE,
|
|
BASE_NONE,
|
|
NULL,
|
|
0x0,
|
|
"The actual H.263 data", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_data,
|
|
{
|
|
"H.263 stream",
|
|
"h263.stream",
|
|
FT_BYTES,
|
|
BASE_NONE,
|
|
NULL,
|
|
0x0,
|
|
"The H.263 stream including its Picture, GOB or Macro block start code.", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_psc,
|
|
{
|
|
"H.263 Picture start Code",
|
|
"h263.psc",
|
|
FT_UINT32,
|
|
BASE_HEX,
|
|
NULL,
|
|
0xfffffc00,
|
|
"Picture start Code, PSC", HFILL
|
|
}
|
|
},
|
|
{ &hf_h263_gbsc,
|
|
{
|
|
"H.263 Group of Block Start Code",
|
|
"h263.gbsc",
|
|
FT_UINT32,
|
|
BASE_HEX,
|
|
NULL,
|
|
0xffff8000,
|
|
"Group of Block Start Code", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_TR,
|
|
{
|
|
"H.263 Temporal Reference",
|
|
"h263.tr2",
|
|
FT_UINT32,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x000003fc,
|
|
"Temporal Reference, TR", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_split_screen_indicator,
|
|
{
|
|
"H.263 Split screen indicator",
|
|
"h263.split_screen_indicator",
|
|
FT_BOOLEAN,
|
|
8,
|
|
TFS(&on_off_flg),
|
|
0x80,
|
|
"Split screen indicator", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_document_camera_indicator,
|
|
{
|
|
"H.263 Document camera indicator",
|
|
"h263.document_camera_indicator",
|
|
FT_BOOLEAN,
|
|
8,
|
|
TFS(&on_off_flg),
|
|
0x40,
|
|
"Document camera indicator", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_full_picture_freeze_release,
|
|
{
|
|
"H.263 Full Picture Freeze Release",
|
|
"h263.split_screen_indicator",
|
|
FT_BOOLEAN,
|
|
8,
|
|
TFS(&on_off_flg),
|
|
0x20,
|
|
"Full Picture Freeze Release", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_source_format,
|
|
{
|
|
"H.263 Source Format",
|
|
"h263.source_format",
|
|
FT_UINT8,
|
|
BASE_HEX,
|
|
VALS(srcformat_vals),
|
|
0x1c,
|
|
"Source Format", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_ext_source_format,
|
|
{
|
|
"H.263 Source Format",
|
|
"h263.ext_source_format",
|
|
FT_UINT8,
|
|
BASE_HEX,
|
|
VALS(ext_srcformat_vals),
|
|
0x0,
|
|
"Source Format", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_UFEP,
|
|
{
|
|
"H.263 Update Full Extended PTYPE",
|
|
"h263.ufep",
|
|
FT_UINT16,
|
|
BASE_DEC,
|
|
VALS(h263_ufep_vals),
|
|
0x0380,
|
|
"Update Full Extended PTYPE", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_opptype,
|
|
{
|
|
"H.263 Optional Part of PLUSPTYPE",
|
|
"h263.opptype",
|
|
FT_UINT24,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x7fffe0,
|
|
"Optional Part of PLUSPTYPE", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_payload_picture_coding_type,
|
|
{
|
|
"H.263 Picture Coding Type",
|
|
"h263.picture_coding_type",
|
|
FT_BOOLEAN,
|
|
8,
|
|
TFS(&picture_coding_type_flg),
|
|
0x02,
|
|
"Picture Coding Typet", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_opt_unres_motion_vector_mode,
|
|
{
|
|
"H.263 Optional Unrestricted Motion Vector mode",
|
|
"h263.opt_unres_motion_vector_mode",
|
|
FT_BOOLEAN,
|
|
8,
|
|
TFS(&on_off_flg),
|
|
0x01,
|
|
"Optional Unrestricted Motion Vector mode", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_syntax_based_arithmetic_coding_mode,
|
|
{
|
|
"H.263 Optional Syntax-based Arithmetic Coding mode",
|
|
"h263.syntax_based_arithmetic_coding_mode",
|
|
FT_BOOLEAN,
|
|
8,
|
|
TFS(&on_off_flg),
|
|
0x80,
|
|
"Optional Syntax-based Arithmetic Coding mode", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_optional_advanced_prediction_mode,
|
|
{
|
|
"H.263 Optional Advanced Prediction mode",
|
|
"h263.optional_advanced_prediction_mode",
|
|
FT_BOOLEAN,
|
|
8,
|
|
TFS(&on_off_flg),
|
|
0x40,
|
|
"Optional Advanced Prediction mode", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_PB_frames_mode,
|
|
{
|
|
"H.263 Optional PB-frames mode",
|
|
"h263.PB_frames_mode",
|
|
FT_BOOLEAN,
|
|
8,
|
|
TFS(&PB_frames_mode_flg),
|
|
0x20,
|
|
"Optional PB-frames mode", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_GN,
|
|
{
|
|
"H.263 Group Number",
|
|
"h263.gn",
|
|
FT_UINT32,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x00007c00,
|
|
"Group Number, GN", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_pquant,
|
|
{
|
|
"H.263 Quantizer Information (PQUANT)",
|
|
"h263.pquant",
|
|
FT_UINT32,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"Quantizer Information (PQUANT)", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_cpm,
|
|
{
|
|
"H.263 Continuous Presence Multipoint and Video Multiplex (CPM)",
|
|
"h263.cpm",
|
|
FT_BOOLEAN,
|
|
8,
|
|
TFS(&cpm_flg),
|
|
0x0,
|
|
"Continuous Presence Multipoint and Video Multiplex (CPM)", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_psbi,
|
|
{
|
|
"H.263 Picture Sub-Bitstream Indicator (PSBI)",
|
|
"h263.psi",
|
|
FT_UINT32,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"Picture Sub-Bitstream Indicator (PSBI)", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_picture_type_code,
|
|
{
|
|
"H.263 Picture Type Code",
|
|
"h263.psi",
|
|
FT_UINT32,
|
|
BASE_DEC,
|
|
VALS(picture_type_code_vals),
|
|
0x0,
|
|
"Picture Type Code", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_custom_pcf,
|
|
{
|
|
"H.263 Custom PCF",
|
|
"h263.custom_pcf",
|
|
FT_BOOLEAN,
|
|
8,
|
|
TFS(&custom_pcf_flg),
|
|
0x0,
|
|
"Custom PCF", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_pei,
|
|
{
|
|
"H.263 Extra Insertion Information (PEI)",
|
|
"h263.pei",
|
|
FT_BOOLEAN,
|
|
8,
|
|
NULL,
|
|
0x0,
|
|
"Extra Insertion Information (PEI)", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263_psupp,
|
|
{
|
|
"H.263 Supplemental Enhancement Information (PSUPP)",
|
|
"h263.psupp",
|
|
FT_UINT32,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0,
|
|
"Supplemental Enhancement Information (PSUPP)", HFILL
|
|
}
|
|
},
|
|
};
|
|
|
|
static gint *ett[] =
|
|
{
|
|
&ett_h263,
|
|
&ett_h263_payload,
|
|
&ett_h263_optype,
|
|
};
|
|
|
|
|
|
proto_h263 = proto_register_protocol("ITU-T Recommendation H.263 RTP Payload header (RFC2190)",
|
|
"H.263", "h263");
|
|
proto_h263_data = proto_register_protocol("ITU-T Recommendation H.263",
|
|
"H.263 data", "h263data");
|
|
proto_register_field_array(proto_h263, hf, array_length(hf));
|
|
proto_register_subtree_array(ett, array_length(ett));
|
|
register_dissector("h263", dissect_h263, proto_h263);
|
|
register_dissector("h263data", dissect_h263_data, proto_h263_data);
|
|
}
|
|
|
|
void
|
|
proto_register_h263P(void)
|
|
{
|
|
module_t *h263P_module;
|
|
|
|
static hf_register_info hf[] =
|
|
{
|
|
{
|
|
&hf_h263P_payload,
|
|
{
|
|
"H.263 RFC4629 payload",
|
|
"h263P.payload",
|
|
FT_NONE,
|
|
BASE_NONE,
|
|
NULL,
|
|
0x0,
|
|
"The actual H.263 RFC4629 data", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263P_rr,
|
|
{
|
|
"Reserved",
|
|
"h263P.rr",
|
|
FT_UINT16,
|
|
BASE_DEC,
|
|
NULL,
|
|
0xf800,
|
|
"Reserved SHALL be zero", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263P_pbit,
|
|
{
|
|
"P",
|
|
"h263P.p",
|
|
FT_BOOLEAN,
|
|
16,
|
|
NULL,
|
|
0x0400,
|
|
"Indicates (GOB/Slice) start or (EOS or EOSBS)", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263P_vbit,
|
|
{
|
|
"V",
|
|
"h263P.v",
|
|
FT_BOOLEAN,
|
|
16,
|
|
NULL,
|
|
0x0200,
|
|
"presence of Video Redundancy Coding (VRC) field", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263P_plen,
|
|
{
|
|
"PLEN",
|
|
"h263P.plen",
|
|
FT_UINT16,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x01f8,
|
|
"Length, in bytes, of the extra picture header", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263P_pebit,
|
|
{
|
|
"PEBIT",
|
|
"h263P.pebit",
|
|
FT_UINT16,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x0003,
|
|
"number of bits that shall be ignored in the last byte of the picture header", HFILL
|
|
}
|
|
},
|
|
|
|
|
|
{
|
|
&hf_h263P_tid,
|
|
{
|
|
"Thread ID",
|
|
"h263P.tid",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
NULL,
|
|
0xe0,
|
|
"Thread ID", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263P_trun,
|
|
{
|
|
"Trun",
|
|
"h263P.trun",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x1e,
|
|
"Monotonically increasing (modulo 16) 4-bit number counting the packet number within each thread", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263P_s,
|
|
{
|
|
"S",
|
|
"h263P.s",
|
|
FT_UINT8,
|
|
BASE_DEC,
|
|
NULL,
|
|
0x01,
|
|
"Indicates that the packet content is for a sync frame", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263P_extra_hdr,
|
|
{
|
|
"Extra picture header",
|
|
"h263P.extra_hdr",
|
|
FT_BYTES,
|
|
BASE_NONE,
|
|
NULL,
|
|
0x0,
|
|
"Extra picture header", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263P_PSC,
|
|
{
|
|
"H.263 PSC",
|
|
"h263P.PSC",
|
|
FT_UINT16,
|
|
BASE_HEX,
|
|
NULL,
|
|
0xfc00,
|
|
"Picture Start Code(PSC)", HFILL
|
|
}
|
|
},
|
|
{
|
|
&hf_h263P_TR,
|
|
{
|
|
"H.263 Temporal Reference",
|
|
"h263P.tr",
|
|
FT_UINT16,
|
|
BASE_HEX,
|
|
NULL,
|
|
0x03fc,
|
|
"Temporal Reference, TR", HFILL
|
|
}
|
|
},
|
|
|
|
};
|
|
|
|
static gint *ett[] =
|
|
{
|
|
&ett_h263P,
|
|
&ett_h263P_extra_hdr,
|
|
&ett_h263P_payload,
|
|
&ett_h263P_data,
|
|
};
|
|
|
|
|
|
proto_h263P = proto_register_protocol("ITU-T Recommendation H.263 RTP Payload header (RFC4629)",
|
|
"H263P", "h263p");
|
|
|
|
proto_register_field_array(proto_h263P, hf, array_length(hf));
|
|
proto_register_subtree_array(ett, array_length(ett));
|
|
|
|
h263P_module = prefs_register_protocol(proto_h263P, proto_reg_handoff_h263P);
|
|
|
|
prefs_register_uint_preference(h263P_module, "dynamic.payload.type",
|
|
"H263-1998 and H263-2000 dynamic payload type",
|
|
"The dynamic payload type which will be interpreted as H264",
|
|
10,
|
|
&temp_dynamic_payload_type);
|
|
|
|
register_dissector("h263P", dissect_h263P, proto_h263P);
|
|
|
|
}
|
|
|
|
|