That makes it clearer that it's not a string, and avoids some type
complaints from change Ida7b98af8c44a52ddac2c4ab0702db2519a0c4af.
Update a comment while we're at it.
Change-Id: I6737bb2a7ff3b4d461700c641cb580194f7809e7
Reviewed-on: https://code.wireshark.org/review/28572
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Changes:
- rtpstream_id_t is introduced and its related functions. It encapsulates comparsion of two rtpstreams.
- dest_* renamed to dst_*
- src_port and dst_port are 16bits only.
- sharkd_session.c use common id functions
- IAX2 part related to RTP updated to common *id* function
Change-Id: Id38728a4e5d80363480c7ce42ff9c6eaad069686
Reviewed-on: https://code.wireshark.org/review/28340
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Changes:
- rtpstream_packet renamed to rtpstream_packet_cb to follow *_cb pattern
- variables/types used in iax2_analysis_dialog were created as copy of *rtp* ones, but names were left as *rtp* -> *iax2*
- struct _rtp_stream_info replaced with rtp_stream_info_t
- there was tap-rtp-analysis.h, but no tap-rtp-analysis.c - related content was moved from tap-rtp-common.c
- *rtp_stream* functions renamed to *rtpstream*
- renamed rtp_stream_info_t to rtpstream_info_t to follow *rtpstream* pattern.
- renamed ui/rtp_stream.c rtpstream_draw -> rtpstream_draw_cb
Change-Id: Ib11ff5367cc464ea1b0c73432bc50b0eb9cd203e
Reviewed-on: https://code.wireshark.org/review/28299
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Move */ to a separate line below the SPDX identifier.
Change-Id: Id1032215449cfccae0933147b45e04b65e0b727f
Reviewed-on: https://code.wireshark.org/review/27211
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Refactoring from If366d42b07dc822636404ac44ba2306ec4418b4e ignored
dialogs outside of the main window. Searched for removed signals
from CaptureFile class and applied new CaptureEvent handling.
Change-Id: I9e0aaa0dc1c702ce04810d27c8f9273997f7ca30
Reviewed-on: https://code.wireshark.org/review/25007
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
The split isn't necessary now that epan no longer uses the capture_file
structure.
Change-Id: Ia232712a2fb5db511865805518e8d03509b2167f
Reviewed-on: https://code.wireshark.org/review/24693
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have cfile-int.h declare the structure, and use it in files that
directly access the structure.
Have cfile.h just incompletely declare the structure and include it
rather than explicitly declaring it in source files or other header
files.
Never directly refer to struct _capture_file except when typedeffing
capture_file.
Add #includes as necessary, now that cfile.h doesn't drag in a ton of
Change-Id: I7931c8039d75ff7c980b0f2a6e221f20e602a556
Reviewed-on: https://code.wireshark.org/review/24686
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This should solve the "passing parameter statinfo of type "tap_rtp_stat_t"
(size 5040 bytes) by value" warnings reported by Coverity.
Change-Id: I327906f7925ab21a914b8a98ff8481a0af9f7a2f
Reviewed-on: https://code.wireshark.org/review/19380
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
- spaghetti code for save was split into separate functions
- code saves G.711 only, all other codecs are saved as silence with correct duration
- code is ready to include other codecs
- code supports 8000 Hz sampling rate only, other rates are rejected with warning
- bidirectional stream (forward and reverse) creates stereo .au file
- output is based on timestamps in RTP streams
- save operation is slower than before because it is set of seek() - one per each codec sample
- code allows align of save audio:
- as it is - each stream is saved from its beginning, no aling
- to start of each other - later stream is prepended with silence
- align saved audio to beginning of capture file - each stream is prepended with silence
- save to raw works correctly now - only payload is saved
- old code was inserting G.711 silence time to time to raw data
Bug: 13242
Change-Id: I74d02a1cc1c75acf9ffe930d078c00a0555cbfb6
Reviewed-on: https://code.wireshark.org/review/19245
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Only the payload save should be deactivated
Bug: 12406
Change-Id: I8dd53c0b0c1ea4568f0ff292806656bfb65a6566
Reviewed-on: https://code.wireshark.org/review/15322
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Rename the "Play Call" button to "Play Streams". Move the button
creation code to a common routine. Use it to add a "Play Streams" button
to the RTP Stream Analysis, similar to the GTK+ UI.
Don't restrict RTP to IPv[46] as suggested by Michal. I don't have any
RTP-over-Bluetooth captures so I can't test this directly.
Change-Id: I4703cac1d5bf5b3ff0255d36da2c5164feb0547d
Reviewed-on: https://code.wireshark.org/review/10888
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Rename ui/gtk/iax2_analysis.h to ui/tap-iax2-analysis.h. Move
iax2_packet_analyse to ui/tap-iax2-analysis.c.
Rename rtp_analysis.h to tap-rtp-analysis.h to match IAX2.
Change-Id: Ice7e9ad0d7bf62d631850089c880ec09a3e101dd
Reviewed-on: https://code.wireshark.org/review/10375
Reviewed-by: Gerald Combs <gerald@wireshark.org>
QDialog::accept and ::reject hide the dialog but don't delete it. In the
case of WiresharkDialog and its subclasses we might leak memory or leave
files open. Call deleteLater when we close the dialog.
Change-Id: Ie0b848a7deeeee4667925b0d886e498f13a86bfc
Reviewed-on: https://code.wireshark.org/review/9781
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Combine the GTK+ RTP Stream Analysis and RTP Graph Analysis dialogs into
one. Yell at the user less. Disable the Analyze RTP Stream menu item if
we don't have an RTP stream selected.
There are a *lot* of moving parts in this dialog. I've tested with the
few RTP captures I have but it's by no means complete.
"To do" items are listed at the top of rtp_analysis.cpp.
Change-Id: Id503977f069bebc46cc68bc749f0c9cbf4d37bf6
Reviewed-on: https://code.wireshark.org/review/9650
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Guy Harris