Display port number in SCTP Conversations table.
Get correct display filter from SCTP Conversations.
Arrange Conversations and Endpoints tabs alphabetically.
svn path=/trunk/; revision=24291
This patch provides a new RTP Player preferences dialog. It allows one to
select the maximum number of visable channels in the RTP Player window. The
default is four (4) channels which is the maximum number of usable channels
that the RTP Player can display and still have access to the bottom row buttons
on a 1024*768 resolution display. Specifying a value less than 1 or greater than
10 will be result in the RTP Player displaying the default 4 channels.
svn path=/trunk/; revision=24112
configure and use more than one set of preferences and configuration files.
This can be found in the "Configuration Profiles..." menu item from the Edit
menu, or by pressing Shift-Ctrl-A. It's also possible to start wireshark
and tshark with a named profile by using the "-C ProfileName" option.
A new status pane in the main window will show the current profile.
The configuration files currently stored in the Profiles are:
- Preferences
- Capture Filters
- Display Filters
- Coloring Rules
- Disabled Protocols
- User Accessible Tables
The recent data are by design not added to the profile.
Planned future enhancements:
- make a more convenient function to switch between profiles
- add a "clone profile" button to copy an existing profile
- make the profiles list active and accept return as OK
- save users "Decode as" in the profile
- make new, clone and deletion of profiles more secure
- make some of the recent values available in the profile
This patch also fixes:
- setting default status pane sizes
- a bug setting status pane for packets when not having main lower pane.
svn path=/trunk/; revision=24089
This new code adds a save button to the Statistics IO Graphs window and
is also reusable by any other code that uses GDK Pixmaps to draw graphs.
The Gdk-pixbuf library included in GTK is used for this save function.
svn path=/trunk/; revision=22166
feature lists all of the content found in an HTTP stream (images, http, etc.)
and displays it in a list that allows the user to save each one as a file that
is already reassembled by the dissectors.
svn path=/trunk/; revision=20867
* Remove macros_dlg, the DFMacros UAT goes in the menu with all the rest
* in packet-user_encap.c WTAP_ENCAP=XXX has become useless information for the user leave just the DLT#
svn path=/trunk/; revision=20753
A BER-encoded file can be dissected as one of a number of registered syntaxes (registered using register_ber_syntax_dissector()).
Syntaxes may also be associated with OIDs (or other strings) using register_ber_oid_syntax().
A default syntax with which to dissect a BER-encoded file is determined from its filename (extension). For example, ".cer" and ".crt" files will be dissected as "Certificate".
svn path=/trunk/; revision=20414
Win32: use the widget to display the RSSI and Link Speed values as this is far better understandable than the raw numerical values (especially if you don't know the values well).
the GTK VU meter widget is based on LGPL'ed code from http://www.mumblelina.com/index.php?gtkvumeter=1
... and I've heavily changed and extended it to fit the problem here.
We might use the VU meter widget later at other places as well ...
svn path=/trunk/; revision=19298
is disabled by default, and can be enabled by setting AIRPCAP_CONFIG
in config.nmake. The code is currently limited to Windows, but should
be adaptable to other platforms.
The official announcement won't come until next week, so you'll have to
read the source for details. :)
svn path=/trunk/; revision=18928
IPv4+port rules are supported along with several syntaxes: IOS standard,
IOS extended, ipfilter, ipfw, pf, and netsh. IPv6 is currently not
supported, but shouldn't be too difficult to add.
All of the rules were created using the documentation for each product.
None of them have been tested. For the time being, use them with
caution.
svn path=/trunk/; revision=18737
it to capture_file_dlg.c, and rename its header file. We might want to
move the generic file dialog stuff to a file_dlg.c file (it's currently
in dlg_utils.c), and move the non-capture-file dialog stuff in
capture_file_dlg.c to another file.
svn path=/trunk/; revision=18034
With the new feature we can:
1. Measure how big the bursts are for a video streams (it uses sliding window algorithm) 2. Measure how big the output buffer should be that no packet drop will occur (it uses Leaky bucket algorithm)
3. Detect if we have loses inside the MPEG2 video stream (if there are already MPEG2 packets missing) - this part of code is not added yet, see Limitations
The addition is called Multicast streams and works as follows:
- it uses the TAP system
- the main "stream" logic is taken from rtp_strems.* files
- the TAP system checks for UDP packets where the destination MAC address starts with "01:00:5E" (ethernet multicast address)
- it creates an entry for every new multicast stream
- based on sliding window and leaky bucket algorithm it calculates for every stream average BW, max BW, burst size, max buffer needed, some alarms if the limits are exceeded,...
- the same calculation is done for all streams together
- inside the window dialog you can specify the burst interval, the alarm limits and output speeds
To do & limitations:
- Currently the analysis can be done only for multicast streams, it means that VoD (Video on demand) or PayTV streams, which are normally unicast can not be analysed.
- since the MPEG2 is patended I don't know if decoding of MPEG2 packets is allowed? Can we look inside this packets and calculate packets drops based on some counter information inside the payload? Can someone please answer this question? If we can do this, I will post this part of code too.
- some more flexibility will be added
svn path=/trunk/; revision=17980
- Change to display NCP connection for each conversation
- New NCP Endpoints. Please apply
expert_comp_table
- Use local variable space instead of pointer. The previous implementation utilized pointers and the values would change the table data.
svn path=/trunk/; revision=17446
I have developed an external plugin to enable ssl decryption in
ethereal.
Me
- Remove unnecessary $Id$ from acinclude.m4
- Added packet-ssl-utils.h to Makefile.common
- Fixed a few warnings
TODO
- Lots of warning fixes (see separate mail)
- Reformat function headers to read like the others do
(return value<newline>function-name...)
- Test on Windows platform
- Review the patch to packet-ssl.c and new files packet-ssl-utils.[hc]
svn path=/trunk/; revision=17156