Some of those routines are used only in dumpcap; others are used in
TShark and Wireshark as well.
Change-Id: I9d92483f2fcff57a7d8b6bf6bdf2870505d19fb7
Reviewed-on: https://code.wireshark.org/review/2841
Reviewed-by: Guy Harris <guy@alum.mit.edu>
- allow to change the interface options in the table
- save the options to preferences when the dialog is left
- add a field for setting a capture filter for all selected interfaces
- add a "Compile BPF" button and a window to show the compiled filter output
- try to address Alexis' and Evan's comments
Change-Id: Ic1272e29183ec80e2d2f4b3e494c79dabe2c3b6f
Reviewed-on: https://code.wireshark.org/review/1946
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a "record type" field to "struct wtap_pkthdr"; currently, it can be
REC_TYPE_PACKET, for a record containing a packet, or
REC_TYPE_FILE_TYPE_SPECIFIC, for records containing file-type-specific
data.
Modify code that reads packets to be able to handle non-packet records,
even if that just means ignoring them.
Rename some routines to indicate that they handle more than just
packets.
We don't yet have any libwiretap code that supplies records other than
REC_TYPE_PACKET or that supporting writing records other than
REC_TYPE_PACKET, or any code to support plugins for handling
REC_TYPE_FILE_TYPE_SPECIFIC records; this is just the first step for bug
8590.
Change-Id: Idb40b78f17c2c3aea72031bcd252abf9bc11c813
Reviewed-on: https://code.wireshark.org/review/1773
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That variable is only defined if we HAVE_LIBPCAP. Should fix OSX10.5 buildbot.
Change-Id: I0bafc48955ef4af3c0b8d9d7a35b1e8b27577d31
Reviewed-on: https://code.wireshark.org/review/1669
Reviewed-by: Evan Huus <eapache@gmail.com>
For each graph you can set:
- Its visibility
- A name
- A display filter
- Color, from a fixed list
- Plot style: Line, Impulse, Bar, Stacked Bar, Dot, Square, Diamond
- Basic Y Axes (packets/s, bytes/s, bits/s)
- Computed Y Axes (SUM, MIN, AVG, MAX)
- Smoothing
You can pan and zoom using the mouse and keyboard. Clicking on a graph
selects the last packet for that interval. If all graphs have the same Y
axis a single label is shown, otherwise a legend is shown.
The time scale (X axis) can be toggled between relative seconds and the
time of day.
Graphs can be saved as PDF, PNG, BMP, and JPEG. Settings are "sticky"
via the io_graphs UAT.
To do:
- Minimize graph drawing delays.
- Figure out why smoothing differs from GTK+
- Everything else at the top of io_graph_dialog.cpp
- Fix empty resets.
A fair amount of code was copied from TCPStreamDialog. We might want to
subclass QCustomPlot and place the shared code there.
Move common syntax checking to SyntaxLineEdit.
Move some common code from ui/gtk/io_stat.c to ui/io_graph_item.[ch] and
use it in both GTK+ and Qt.
Make the io_graph_item_t array allocation in io_stat.c static. The
behavior should be identical and this gives us additional compile-time
checks.
Change-Id: I9a3d544469b7048f0761fdbf7bcf20f44ae76577
Reviewed-on: https://code.wireshark.org/review/435
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Gerald Combs <gerald@wireshark.org>
Rebase with last change and add Logcat export
Change-Id: Idc9b444b1bf14b95ff60e8466e94f7eecd875b47
Reviewed-on: https://code.wireshark.org/review/14
Reviewed-by: Anders Broman <a.broman58@gmail.com>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The best heuristic can fail, so add possibility to manually choose
capture file format type, so not correctly recognize file format can be
loaded in Wireshark.
On the other side now it is possible to open capture file
as file format to be dissected.
Change-Id: I5a9f662b32ff7e042f753a92eaaa86c6e41f400a
Reviewed-on: https://code.wireshark.org/review/16
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Reviewed-by: Evan Huus <eapache@gmail.com>
Tested-by: Evan Huus <eapache@gmail.com>
From me : Add window title and fix missing text (Do you want to ....)
Change-Id: I1448d7b85ad9490a92dac7e89d9fd2fdb51a145e
Partial-Bug: 9003
Reviewed-on: https://code.wireshark.org/review/239
Reviewed-by: Evan Huus <eapache@gmail.com>
capture interfaces dialog code, *and* the code that calls it, under
HAVE_LIBPCAP.
Still more stuff to remove from the no-pcap UI, such as the Capture
menu, the capture filter in the main window, and the list of interfaces
in the main window.
svn path=/trunk/; revision=53582
* Reuse sparkline from welcome
* Split settings in tab (!= GTK)
* No all feature work (Work In Progress...)
* ...
Comments (and review) are welcome !
svn path=/trunk/; revision=53563
It looks like resetting the packet list model during freezing and
thawing disconnects the selection changed signal between the model and
the main window. Rename the packet list's setMenusFollowStream signal to
packetSelectionChanged and use it to trigger menu updates in the main
window.
svn path=/trunk/; revision=53516
I may eventually switch this to use proto_* values instead of strings, but just the addition of the loop is more jarring as compared to the simple comparing of ip or ethernet values. But it should lead to a smaller (less protocol specific) packet_info structure.
svn path=/trunk/; revision=53476
Create a new dialog each time the user follows a stream. A lot of the
follow code seems to assume one and only one dialog so there are likely
outstanding bugs.
Don't use the global cfile (should we deprecate its usage?). We want to
move closer to multiple documents, not further away.
Clean up after ourselves. Free our payload list and unlink our temp
file. Make a bunch of gchar*s QStrings. Make sure our destructor gets
called and use it.
Make member variable and method names more consistent.
svn path=/trunk/; revision=53306
In the current Qt startup sequence the main window + splash screen is
displayed before the main preferences are loaded which means we can't
immediately apply the correct geometry. For now, use an animation to
morph from the default to the saved geometry after the prefs are loaded.
Get rid of main_do_quit() (Qt) and main_window_exit() (Qt+GTK). It looks
like they were unused.
Add wsApp->isInitialized() and use it to see if we should exit() when
the main window is closed. Otherwise we won't shut the application down
and clean up properly.
svn path=/trunk/; revision=52988
time in order to fill in their respective context menus. R52386 broke
that. Fix it and add comments about handling reparenting. Fixes bug
9265.
svn path=/trunk/; revision=52600
Move the declaration of set_last_open_dir() to ui/util.h. It still
has separate GTK+ and Qt implemenations. We might want to move it to
ui/util.c at some point. Remove a lot of unnecessary GTK+ includes.
Remove most of the references to the global cfile while we're at it.
svn path=/trunk/; revision=52542
Make extra_split_ a member variable again. Make it and master_split_
full-on values. Set various parent/child relationships at startup
so that each widget is associated with a layout (which appears to be
the actual fix).
Make the throttled startup delay huge so that it's easier to browse
using GammaRay.
[1] https://github.com/KDAB/GammaRay
svn path=/trunk/; revision=52386
follow_stream_dialog.cpp. Remove the ones that we don't use. Use
QMessageBox in place of simple_dialog.
Move IP6OPT_HOME_ADDRESS and related definitions to packet-ipv6.c. It
looks like we only use it there and it conflicts with WinPcap.
Mark some items unused.
svn path=/trunk/; revision=51951
Add TCP/UDP/SSL Follow feature to QtShark
Known issue :
* Duplicate code with GTK (function need follow_info_t struct but in GTK there is some GWidget variable in struct)
* Sometimes TCP Follow fail...
svn path=/trunk/; revision=51883
QWidget::setWindowModified: The window title does not contain a '[*]' placeholder
a) Add [*] to the window title.
b) Also set the window title before calling setWindowModified
Not really understanding what I'm doing here, just following the hints
given in http://qt-project.org/forums/viewthread/2108
Original logmessages when closing Wireshark while running a capture.
17:23:39.652 Capture Msg Capture stopped!
17:23:39.653 Main Dbg Callback: capture update finished
QWidget::setWindowModified: The window title does not contain a '[*]' placeholder
FIX: packet list heading menu sensitivity
17:23:39.653 Dbg FIX: capture_info_ui_destroy
17:23:39.653 Main Dbg Callback: Closing
FIX: packet list heading menu sensitivity
17:23:39.655 Main Dbg Callback: Closed
svn path=/trunk/; revision=51722
splitters they're actually layed out in. This should let us reorganize the
splitters at will (when the prefs change) without reconstructing the panes.
svn path=/trunk/; revision=51718
panes, not yet which data goes in which pane).
You currently have to restart for the change to take effect. I also had to move
the preferences-reading (and thus the epan_init) call to before the main window
instantiation so that the preference was actually available for use. This means
that the progress-bar doesn't show up for very long any more, since most of the
work is already done by the time it appears.
I'm sure there is a way to delay just the layout setup until later, but I kept
getting slot errors I couldn't figure out...
svn path=/trunk/; revision=51647
deletes the interface list, which in turn kills off the dumpcap process
it may be running. This should hopefully keep us from leaving dumpcap
processes running in the background on Windows. (Am I the only one
running QtShark on that platform?)
svn path=/trunk/; revision=51485
Add CaptureFilterCombo and CaptureFilterEdit classes, similar to their
display filter counterparts. Add a CaptureFilterSyntaxWorker class which
runs a syntax check in a background thread similar to the threaded code
in capture_dlg.c. Add a bunch of related signal and slot plumbing. Other
minor fixups.
svn path=/trunk/; revision=51200
actionEditConfigurationProfiles. This keeps it from being converted to
the default preferences item on OS X.
Remove a hack where we stored the text for
actionEditConfigurationProfiles in its iconText in order to keep it from
clobbering actionEditPreferences. It doesn't seem to be necessary.
svn path=/trunk/; revision=50636
Add Summary Statistics to qtshark (Statistics => Summary)
Now, use tabs to split summary display (File Capture details, Capture Statistics)
Add also Comment Summary tab (to replace Statistics => Comments Summary)
From me :
Fix order of summary files in Qtshark.pro
svn path=/trunk/; revision=50470