wtap_file_read_expected_bytes() from an open routine - open routines are
supposed to return -1 on error, 0 if the file doesn't appear to be a
file of the specified type, or 1 if the file does appear to be a file of
the specified type, but those macros will cause the caller to return
FALSE on errors (so that, even if there's an I/O error, it reports "the
file isn't a file of the specified type" rather than "we got an error
trying to read the file").
When doing reads in an open routine before we've concluded that the file
is probably of the right type, return 0, rather than -1, if we get
WTAP_ERR_SHORT_READ - if we don't have enough data to check whether a
file is of a given type, we should keep trying other types, not give up.
For reads done *after* we've concluded the file is probably of the right
type, if a read doesn't return the number of bytes we asked for, but
returns an error of 0, return WTAP_ERR_SHORT_READ - the file is
apparently cut short.
For NetMon and NetXRay/Windows Sniffer files, use a #define for the
magic number size, and use that for both magic numbers.
svn path=/trunk/; revision=46803
by Wiretap, to indicate whether certain fields in that structure
actually have data in them.
Use the "time stamp present" flag to omit showing time stamp information
for packets (and "packets") that don't have time stamps; don't bother
working very hard to "fake" a time stamp for data files.
Use the "interface ID present" flag to omit the interface ID for packets
that don't have an interface ID.
We don't use the "captured length, separate from packet length, present"
flag to omit the captured length; that flag might be present but equal
to the packet length, and if you want to know if a packet was cut short
by a snapshot length, comparing the values would be the way to do that.
More work is needed to have wiretap/pcapng.c properly report the flags,
e.g. reporting no time stamp being present for a Simple Packet Block.
svn path=/trunk/; revision=41185
form of corruption/bogosity in a file, including in a file header as
well as in records in the file. Change the error message
wtap_strerror() returns for it to reflect that.
Use it for some file header problems for which it wasn't already being
used - WTAP_ERR_UNSUPPORTED shouldn't be used for that, it should only
be used for files that we have no reason to believe are invalid but that
have a version number we don't know about or some other
non-link-layer-encapsulation-type value we don't know about.
svn path=/trunk/; revision=40175
by the gunzipping code. Have it also supply a err_info string, and
report it. Have file_error() supply an err_info string.
Put "the file" - or, for WTAP_ERR_DECOMPRESS, "the compressed file", to
suggest a decompression error - into the rawshark and tshark errors,
along the lines of what other programs print.
Fix a case in the Netscaler code where we weren't fetching the error
code on a read failure.
svn path=/trunk/; revision=36748
wtap-int.h, and change the unions of pointers to those private data
structures into just void *'s.
Have the generic wtap close routine free up the private data, rather
than the type-specific close routine, just as the wtap_dumper close
routine does for its private data. Get rid of close routines that don't
do anything any more.
svn path=/trunk/; revision=32015
- automatic adjustment depending on file format
- manual adjustment through menu items
save the setting in the recent file
svn path=/trunk/; revision=15534
I've done more than a day to change the timestamp resolution from microseconds to nanoseconds. As I really don't want to loose those changes, I'm going to check in the changes I've done so far. Hopefully someone else will give me a helping hand with the things left ...
What's done: I've changed the timestamp resolution from usec to nsec in almost any place in the sources. I've changed parts of the implementation in nstime.s/.h and a lot of places elsewhere.
As I don't understand the editcap source (well, I'm maybe just too tired right now), hopefully someone else might be able to fix this soon.
Doing all those changes, we get native nanosecond timestamp resolution in Ethereal. After fixing all the remaining issues, I'll take a look how to display this in a convenient way...
As I've also changed the wiretap timestamp resolution from usec to nsec we might want to change the wiretap version number...
svn path=/trunk/; revision=15520
were in the middle of processing a record. If we got one at the
*beginning* of the record, that just means we've come to a clean
end-of-file.
svn path=/trunk/; revision=13064
If we get such an error, always call "file_error()" to get an indication
of what the error was and, if it returns 0, set the error to
WTAP_ERR_SHORT_READ.
svn path=/trunk/; revision=12442
they have LF at the end of the line on UN*X and CR/LF on Windows;
hopefully this means that if a CR/LF version is checked in on Windows,
the CRs will be stripped so that they show up only when checked out on
Windows, not on UN*X.
svn path=/trunk/; revision=11400
addition to an error code, an error info string, for
WTAP_ERR_UNSUPPORTED, WTAP_ERR_UNSUPPORTED_ENCAP, and
WTAP_ERR_BAD_RECORD errors. Replace the error messages logged with
"g_message()" for those errors with g_strdup()ed or g_strdup_printf()ed
strings returned as the error info string, and change the callers of
those routines to, for those errors, put the info string into the
printed message or alert box for the error.
Add messages for cases where those errors were returned without printing
an additional message.
Nobody uses the error code from "cf_read()" - "cf_read()" puts up the
alert box itself for failures; get rid of the error code, so it just
returns a success/failure indication.
Rename "file_read_error_message()" to "cf_read_error_message()", as it
handles read errors from Wiretap, and have it take an error info string
as an argument. (That handles a lot of the work of putting the info
string into the error message.)
Make some variables in "ascend-grammar.y" static.
Check the return value of "erf_read_header()" in "erf_seek_read()".
Get rid of an unused #define in "i4btrace.c".
svn path=/trunk/; revision=9852
offset of the beginning of the first record containing data from that
packet, and the offset from the first byte of data in that record of the
first byte of data from that packet; to read a given packet, seek to the
offset of the first record, and keep processing packets until we find
one with the right direction.
This fixes a problem where it wasn't correctly reading the packet, when
doing random access, in cases where you have a sequence of records that
stop in the middle of a packet.
svn path=/trunk/; revision=5873
the internal z_err value for the stream if an "fseek()" call it makes
fails, so that if "gzerror()" is subsequently called, it returns Z_OK
rather than an error.
To work around this, we pass "file_seek()" an "int *err", and have the
with-zlib version of "file_seek()" check, if "gzseek()" fails, whether
the return value of "file_error()" is 0 and, if so, have it return
"errno" instead.
svn path=/trunk/; revision=5642
an "err" argument that points to an "int" into which to put an error
code if it fails.
Check for errors in one call to it, and note that we should do so in
other places.
In the "wtap_seek_read()" call in the TCP graphing code, don't overwrite
"cfile.pseudo_header", and make the buffer into which we read the data
WTAP_MAX_PACKET_SIZE bytes, as it should be.
In some of the file readers for text files, check for errors from the
"parse the record header" and "parse the hex dump" routines when reading
sequentially.
In "csids_seek_read()", fix some calls to "file_error()" to check the
error on the random stream (that being what we're reading).
svn path=/trunk/; revision=4874
For file types where we allocate private data, add "close" routines
where they were missing, to free the private data. Also fix up the code
to clean up after some errors by freeing private data where that wasn't
being done.
Get rid of unused arguments to "wtap_dump_open_finish()".
Fix indentation.
svn path=/trunk/; revision=4857
scripts, and check in changes to add _U_ to some unused arguments (some
other should perhaps be used, so we leave the _U_ out so that the
warnings serve as a reminder to check those).
svn path=/trunk/; revision=4847
The second argument to g_ptr_array_free() does not indicate to
glib to free the objects that the pointers in the GPtrArray refer to,
but simply whether or not the free the block of pointers. We have
to free the objects ourselves.
svn path=/trunk/; revision=4391
beginning of the file before reading anything from the file is bogus -
do that in the loop that tries each of the open routines, instead.
(They may have to reset the seek pointer later if, for example, the
capture file begins with the first packet, and the "open()" routine
looks at that packet to try to guess whether the packet is in the file
format in question.)
Set "wth->data_offset" to 0 while you're at it, so capture file readers
don't have to do that, either.
svn path=/trunk/; revision=3123
just an EOF, it should set "*err" to 0. Fix up a bunch of read routines
for various capture file types to set "*err" appropriately.
svn path=/trunk/; revision=2667
pseudo_header.
Use generic "p2p_phdr" instead of "lapd_phdr". Modify toshiba.c and
packet-lapd.c to take that into account.
Add frame.p2p_dir, a filterable field, 0=sent, 1=recvd
Make p2p_dir available in packe_info, as I think it will be needed
in VJ COMP and UNCOMP dissection.
Rename WTAP_ENCAP_TR to WTAP_ENCAP_TOKEN_RING.
Mention pppd-log support in man page.
Mention atmsnoop in README.
svn path=/trunk/; revision=2455