return an "EOF or error" indication - an EOF without an error will
return 0.
In iseries_seek_next_packet(), return an error code of WTAP_ERR_BAD_FILE
and an appropriate error message if we don't find a packet header within
the next ISERIES_MAX_TRACE_LEN lines, don't just return -1 and leave the
error information unchanged.
Setting an argument variable before returning has no effect, so don't do
it (so that we don't leave the mistaken impression that it *is* doing
something).
Clean up indentation.
svn path=/trunk/; revision=46819
wtap_file_read_expected_bytes() from an open routine - open routines are
supposed to return -1 on error, 0 if the file doesn't appear to be a
file of the specified type, or 1 if the file does appear to be a file of
the specified type, but those macros will cause the caller to return
FALSE on errors (so that, even if there's an I/O error, it reports "the
file isn't a file of the specified type" rather than "we got an error
trying to read the file").
When doing reads in an open routine before we've concluded that the file
is probably of the right type, return 0, rather than -1, if we get
WTAP_ERR_SHORT_READ - if we don't have enough data to check whether a
file is of a given type, we should keep trying other types, not give up.
For reads done *after* we've concluded the file is probably of the right
type, if a read doesn't return the number of bytes we asked for, but
returns an error of 0, return WTAP_ERR_SHORT_READ - the file is
apparently cut short.
For NetMon and NetXRay/Windows Sniffer files, use a #define for the
magic number size, and use that for both magic numbers.
svn path=/trunk/; revision=46803
which could use lseek() and were thus expensive due to system call
overhead. To avoid making a system call for every packet on a
sequential read, we maintained a data_offset field in the wtap structure
for sequential reads.
It's now a routine that just returns information from the FILE_T data
structure, so it's cheap. Use it, rather than maintaining the data_offset
field.
Readers for some file formats need to maintain file offset themselves;
have them do so in their private data structures.
svn path=/trunk/; revision=42423
by Wiretap, to indicate whether certain fields in that structure
actually have data in them.
Use the "time stamp present" flag to omit showing time stamp information
for packets (and "packets") that don't have time stamps; don't bother
working very hard to "fake" a time stamp for data files.
Use the "interface ID present" flag to omit the interface ID for packets
that don't have an interface ID.
We don't use the "captured length, separate from packet length, present"
flag to omit the captured length; that flag might be present but equal
to the packet length, and if you want to know if a packet was cut short
by a snapshot length, comparing the values would be the way to do that.
More work is needed to have wiretap/pcapng.c properly report the flags,
e.g. reporting no time stamp being present for a Simple Packet Block.
svn path=/trunk/; revision=41185
form of corruption/bogosity in a file, including in a file header as
well as in records in the file. Change the error message
wtap_strerror() returns for it to reflect that.
Use it for some file header problems for which it wasn't already being
used - WTAP_ERR_UNSUPPORTED shouldn't be used for that, it should only
be used for files that we have no reason to believe are invalid but that
have a version number we don't know about or some other
non-link-layer-encapsulation-type value we don't know about.
svn path=/trunk/; revision=40175
by the gunzipping code. Have it also supply a err_info string, and
report it. Have file_error() supply an err_info string.
Put "the file" - or, for WTAP_ERR_DECOMPRESS, "the compressed file", to
suggest a decompression error - into the rawshark and tshark errors,
along the lines of what other programs print.
Fix a case in the Netscaler code where we weren't fetching the error
code on a read failure.
svn path=/trunk/; revision=36748
- automatic adjustment depending on file format
- manual adjustment through menu items
save the setting in the recent file
svn path=/trunk/; revision=15534
I've done more than a day to change the timestamp resolution from microseconds to nanoseconds. As I really don't want to loose those changes, I'm going to check in the changes I've done so far. Hopefully someone else will give me a helping hand with the things left ...
What's done: I've changed the timestamp resolution from usec to nsec in almost any place in the sources. I've changed parts of the implementation in nstime.s/.h and a lot of places elsewhere.
As I don't understand the editcap source (well, I'm maybe just too tired right now), hopefully someone else might be able to fix this soon.
Doing all those changes, we get native nanosecond timestamp resolution in Ethereal. After fixing all the remaining issues, I'll take a look how to display this in a convenient way...
As I've also changed the wiretap timestamp resolution from usec to nsec we might want to change the wiretap version number...
svn path=/trunk/; revision=15520
they have LF at the end of the line on UN*X and CR/LF on Windows;
hopefully this means that if a CR/LF version is checked in on Windows,
the CRs will be stripped so that they show up only when checked out on
Windows, not on UN*X.
svn path=/trunk/; revision=11400
rather than requiring individual capture file type handlers to do it
(unless they're doing per-packet encapsulation, in which case we check
to make sure they didn't *leave* it as WTAP_ENCAP_PER_PACKET).
svn path=/trunk/; revision=10290
"subscript has type `char'" warnings and to make the code work correctly
if there are characters with the 8th bit set.
svn path=/trunk/; revision=10010
addition to an error code, an error info string, for
WTAP_ERR_UNSUPPORTED, WTAP_ERR_UNSUPPORTED_ENCAP, and
WTAP_ERR_BAD_RECORD errors. Replace the error messages logged with
"g_message()" for those errors with g_strdup()ed or g_strdup_printf()ed
strings returned as the error info string, and change the callers of
those routines to, for those errors, put the info string into the
printed message or alert box for the error.
Add messages for cases where those errors were returned without printing
an additional message.
Nobody uses the error code from "cf_read()" - "cf_read()" puts up the
alert box itself for failures; get rid of the error code, so it just
returns a success/failure indication.
Rename "file_read_error_message()" to "cf_read_error_message()", as it
handles read errors from Wiretap, and have it take an error info string
as an argument. (That handles a lot of the work of putting the info
string into the error message.)
Make some variables in "ascend-grammar.y" static.
Check the return value of "erf_read_header()" in "erf_seek_read()".
Get rid of an unused #define in "i4btrace.c".
svn path=/trunk/; revision=9852
the internal z_err value for the stream if an "fseek()" call it makes
fails, so that if "gzerror()" is subsequently called, it returns Z_OK
rather than an error.
To work around this, we pass "file_seek()" an "int *err", and have the
with-zlib version of "file_seek()" check, if "gzseek()" fails, whether
the return value of "file_error()" is 0 and, if so, have it return
"errno" instead.
svn path=/trunk/; revision=5642
an "err" argument that points to an "int" into which to put an error
code if it fails.
Check for errors in one call to it, and note that we should do so in
other places.
In the "wtap_seek_read()" call in the TCP graphing code, don't overwrite
"cfile.pseudo_header", and make the buffer into which we read the data
WTAP_MAX_PACKET_SIZE bytes, as it should be.
In some of the file readers for text files, check for errors from the
"parse the record header" and "parse the hex dump" routines when reading
sequentially.
In "csids_seek_read()", fix some calls to "file_error()" to check the
error on the random stream (that being what we're reading).
svn path=/trunk/; revision=4874
For file types where we allocate private data, add "close" routines
where they were missing, to free the private data. Also fix up the code
to clean up after some errors by freeing private data where that wasn't
being done.
Get rid of unused arguments to "wtap_dump_open_finish()".
Fix indentation.
svn path=/trunk/; revision=4857
scripts, and check in changes to add _U_ to some unused arguments (some
other should perhaps be used, so we leave the _U_ out so that the
warnings serve as a reminder to check those).
svn path=/trunk/; revision=4847
reading the capture file. Have callers of "wtap_snapshot_length()"
treat a value of 0 as "unknown", and default to WTAP_MAX_PACKET_SIZE (so
that, when writing a capture file in a format that *does* store the
snapshot length, we can at least put *something* in the file).
If we don't know the snapshot length of the current capture file, don't
display a value in the summary window.
Don't use "cfile.snap" as the snapshot length option when capturing -
doing so causes Ethereal to default, when capturing, to the snapshot
length of the last capture file that you read in, rather than to the
snapshot length of the last capture you did (or the initial default of
"no snapshot length").
Redo the "Capture Options" dialog box to group options into sections
with frames around them, and add units to the snapshot length, maximum
file size, and capture duration options, as per a suggestion by Ulf
Lamping. Also add units to the capture count option.
Make the snapshot length, capture count, maximum file size, and capture
duration options into a combination of a check box and a spin button.
If the check box is not checked, the limit in question is inactive
(snapshot length of 65535, no max packet count, no max file size, no max
capture duration); if it's checked, the spinbox specifies the limit.
Default all of the check boxes to "not checked" and all of the spin
boxes to small values.
Use "gtk_toggle_button_get_active()" rather than directly fetching the
state of a check box.
svn path=/trunk/; revision=4709
captures are IP packets, so make the file encapsulation
WTAP_ENCAP_RAW_IP rather than WTAP_ENCAP_PER_PACKET, so you can save
those captures in other formats.
svn path=/trunk/; revision=4503