Add some missing items to the packet list and detail "Copy" context
menus. Don't nest the "Copy" items so deeply. Add YAML to the supported
summary formats.
Note that "Copy as Binary" copies to the clipboard as
application/octet-stream, which is a) arguably correct, and b) not very
useful. Fixes welcome.
Enable and disable packet detail context menu items from a set of
booleans similar to the packet list.
Change-Id: Iaa931c766aa476c33f27de089e5c4dbaf9ce74d6
Ping-Bug: 9320
Bug: 10831
Reviewed-on: https://code.wireshark.org/review/9825
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Enable and disable packet list-relasted menu items in one place. Add
"Colorize Conversation" items to the packet list context menu.
In the GTK+ UI we tend to disable entire menus, which makes their items
inaccessible. Try not to do that in the Qt UI so that menu items are
always visible even if they're disabled.
Remove commented items which are now complete.
Change-Id: I69b878b45334bf88014694b1bf016278fa55a94b
Reviewed-on: https://code.wireshark.org/review/9819
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add CaptureFile::delayedRetapPackets, which starts retapping after the
current batch of UI event are processed. Call it in the constructors of
various dialogs so that they are shown before tapping starts.
This *might* fix a crash found when following large streams from the
Conversations dialog.
Change-Id: If1b87491621ab7efcc0519f95891d34dcd9d18c1
Reviewed-on: https://code.wireshark.org/review/9818
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add logic to setMenusForSelectedPacket for setting the enabled states
for the "Apply As" and "Prepare A" actions. Update the PacketList
context menu code to fill in the right filter at the right time.
Exit out of setMenusForSelectedTreeRow if the packet list has focus so
that we don't clobber the enabled states of various actions.
Take the "Apply As" and "Prepare A" context menu titles from their main
window counterparts. Remove actionApply_as_Filter and
actionPrepare_a_Filter.
Remove completed to-do items.
Change-Id: I8f6f538bb7786d8df02a999f3b449dfde640e847
Reviewed-on: https://code.wireshark.org/review/9810
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This dialog combines the "protocols" and heuristic dissectors (from GTK) into a single tree view where heuristic dissectors are children of their protocol.
Change-Id: I107656afd079c1d1c8a98161b736e4b4ad84f813
Reviewed-on: https://code.wireshark.org/review/9739
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make it an editor frame instead of a dialog similar to the column editor
and prototocol preference editor.
Change-Id: If1a0cdf02dcab0eca98e8d39c94a3c2fe236df5a
Reviewed-on: https://code.wireshark.org/review/9743
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
HCI Summary dialogue collect HCI Opcodes, HCI Events, Hardware Errors,
Statuses and Reasons. Also show occurrence of them. The top level item
is group of items (by OGF or types), the second level item is in real
command, event, hardware error, status or reason. The third level items
are direct link to packet that contains second level item type.
Change-Id: I6b6bd02533c4605a2dd2c1f5dfee46f72a0f3fdc
Reviewed-on: https://code.wireshark.org/review/9676
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Combine the GTK+ RTP Stream Analysis and RTP Graph Analysis dialogs into
one. Yell at the user less. Disable the Analyze RTP Stream menu item if
we don't have an RTP stream selected.
There are a *lot* of moving parts in this dialog. I've tested with the
few RTP captures I have but it's by no means complete.
"To do" items are listed at the top of rtp_analysis.cpp.
Change-Id: Id503977f069bebc46cc68bc749f0c9cbf4d37bf6
Reviewed-on: https://code.wireshark.org/review/9650
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a columnsChanged slot to PacketList and move the column update code
from redrawVisiblePackets there. Make sure we call
packet_list_model_->recreateVisibleRows, which should fix the behavior
described in bug 11324. Call columnsChanged when we, uh, change columns.
Add a sectionMoved slot to handle column reordering.
Don't rebuild the column list when we update the widgets in the column
preferences frame. Do enable and disable the "remove" button as needed.
Try to keep the user from removing all of the columns in both the packet
list and column preferences.
Left as an exercise for the reader: The GTK+ UI also fails when you
remove all of the columns via the preferences:
packet_list.c:377:packet_list_sort_column: assertion failed: (col)
Bug: 11324
Change-Id: Id58cf98e42cbda9aa2fc370ea06b8bcc6098c8ca
Reviewed-on: https://code.wireshark.org/review/9591
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Be less aggressive about resetting the packet list model so that we
retain our selection when (un)coloring packets or rebuilding columns.
Correctly enable a colorization menu item while we're here.
Change-Id: I8d1c8f26dbb8a814b8344b609695b77632006e4b
Reviewed-on: https://code.wireshark.org/review/9608
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add the "View→Colorize Conversation" menu similar to the GTK+ UI. Add
the "Reset" item under the "Colorize Conversation" menu instead of the
top-level "View" menu. Make sure the "Reset" shortcut is Ctrl+Space even
on OS X. Normally Qt would convert it to Cmd+Space, but that's used by
Spotlight.
Add StockIcon::colorIcon and use it to create filled square icons.
Change-Id: I2af9e26d025cdaf97482422bbb9440e28e18d1ac
Reviewed-on: https://code.wireshark.org/review/9595
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The GTK+ equivalent is named "Address Resolution" but "Resolved
Addresses" seemed (to me at least) to be more clear.
Change-Id: I1806354d91bb5ce8af11d20568b92a04c78d4d73
Reviewed-on: https://code.wireshark.org/review/9580
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add ServiceResponseTimeDialog as a subclass of TapParameterDialog,
similar to StatsTreeDialog. Add initial plumbing for statistics menu
items and command line invocation.
Don't append "..." to menu item names. Don't add menu icons. In each
case this avoids repetitive UI clutter.
Change-Id: I463b95c93090160bb81d2e80b16aad389dc0bd6c
Reviewed-on: https://code.wireshark.org/review/8864
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
if we're not capturing to multiple files
Change-Id: I18d36ef8e7e3525b2bd8d94f2b2349cefa3ecb52
Reviewed-on: https://code.wireshark.org/review/9161
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
this should make Visual Studio pick up the generated include files
from the build directory instead of the source directory (which may
contain lefovers from an in-tree build)
Change-Id: Ie3de4cdd85a2865e203118a42ab10f443372f03b
Reviewed-on: https://code.wireshark.org/review/9129
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
As in gcc614a9 we have to manually uncheck buttons if we decide not to action
them.
Change-Id: Ia5dc29a292bc6d75a1e8753da06a053cafa66866
Reviewed-on: https://code.wireshark.org/review/9107
Reviewed-by: Evan Huus <eapache@gmail.com>
If the user decides not to capture after all, by hitting cancel when prompted
for their unsaved changes, we have to manually uncheck the button again because
Qt helpfully checks it for us.
Bug: 11145
Change-Id: I362d72787ddb138d382a899d091698c6652eebb2
Reviewed-on: https://code.wireshark.org/review/9102
Reviewed-by: Evan Huus <eapache@gmail.com>
don't do the switch when the capture can't be started
(e.g. because we didn't select any interface from which to capture)
Change-Id: Ibabd703863d546c95b9fbe9bd2280d67a22dfc26
Reviewed-on: https://code.wireshark.org/review/9072
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
... we go back to the main welcome screen like we do in GTK
Change-Id: I64ef29665af61da55c1971ca59d1fab25d205874
Reviewed-on: https://code.wireshark.org/review/9071
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Switch from a plain QProgressBar to a QFrame with a QProgressBar and a
stop button.
Add a stop_flag boolean to the capture_file struct.
To do:
- Start adding the progress bar to dialogs.
- Don't complain so loudly when the user stops a capture.
Change-Id: Iedd1d7d79f2044f1a53e4fb22186d25930a3ef03
Reviewed-on: https://code.wireshark.org/review/9029
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This replaces the single preference editor dialog in the GTK+ UI.
Change-Id: I10e030981e9f7d1ec121811593586b65cf0797c5
Reviewed-on: https://code.wireshark.org/review/8966
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
By default QMainWindow::createPopupMenu shows a checkable list of
toolbars which aren't synced with our actions under the View menu.
Replace it with a version that handles all the main window widgets.
Change-Id: I5f5c23880133e97e815d3bbbf19ea3bacc482096
Reviewed-on: https://code.wireshark.org/review/8958
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Please found it under Bluetooth menu. It shows all devices found
in logs, not only connected, all that its address can be found in
logs. Show if device is local (in most cases: capturing on it side)
and manufacturer and LMP version what should answer the question what
version of Bluetooth is used by Bluetooth device chip.
Also firmware version.
Change-Id: I32e3b7100cdebcaa850b6541de0ab89dff41c0e1
Reviewed-on: https://code.wireshark.org/review/8901
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Most of the time you intend to go to a new packet, not to go to the previously selected one.
This makes it consistent with all the editors I have used so far.
Change-Id: Ib0cde3c8361a8c3103dd05d622eaba4ee7deab78
Reviewed-on: https://code.wireshark.org/review/8772
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Use a single overloaded dialog, similar to the GTK+ UI.
Change-Id: If85db14a7101770f115bef725f5145e0010c518d
Reviewed-on: https://code.wireshark.org/review/8776
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Changes from the GTK+ UI:
- The display filter is built on the fly with immediate syntax feedback.
- Slightly different layout.
- You can search for fields.
Make the plain SyntaxLineEdit a bit more plain.
Bug: 11128
Change-Id: I06a48cd7b9ba7b9dc193b0199540aede4eb62fa7
Reviewed-on: https://code.wireshark.org/review/8742
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Plumb in more capture file callbacks. Add common functions for setting
the status bar file information. Add and update code to match the GTK+
status bar behavior.
Make sure we update the capture file length when rescanning.
Bug: 10943
Change-Id: Ie84c7a57ee421d57ba3477f8dde3847aaafa1cd1
Reviewed-on: https://code.wireshark.org/review/8594
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Rename "stay_closed" to "dont_reopen" to match cf_save_records and its
GTK+ equivalent. Set "dont_reopen" to FALSE when we "Save As", otherwise
we crash on Windows.
Bug: 10904
Change-Id: I4bb10abc230439e10cc55ffbd5595bfbc0a34b6f
Reviewed-on: https://code.wireshark.org/review/8592
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a setCaptureStopFlag function to ProgressBar. Add a stopTapping
function and setCaptureStopFlag signal to CaptureFile. Use the new
plubming to stop tapping when the IO Graph dialog closes.
Bug: 10116
Change-Id: Ic46814eed18933f511d9d1ff37e2e7918741f353
Reviewed-on: https://code.wireshark.org/review/8480
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Implement the same functionality for "Apply as Column" as it
exists in the GTK version of Wireshark. Especially for the
context menu in the packet view panel.
Change-Id: Id25b7797616ff3b3acf7aa920395516c8a4e9bf9
Reviewed-on: https://code.wireshark.org/review/7604
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Don't call redrawVisiblePackets in PacketList::sectionResized. Otherwise
we trigger the crash in bug 11179. Call recent_set_column_width instead.
Clean up the slots called when column preferences change and when recent
column widths change.
Update our column visibility in redrawVisiblePackets.
Use recent_get_column_width when writing the recent file. columnWidth
doesn't return a valid value when we're not visible.
Bug: 11179.
Change-Id: I34ab93d944b341e42129a1c8ff94ba8f7ad4f5fc
Reviewed-on: https://code.wireshark.org/review/8457
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
10947 Qt Wireshark - The lower left status bar reports "Ready to load or capture" when a live capture is active
Reported by Jim Young
Bug: 10947
Change-Id: I7dcd5081194bbeab43fef4d994220ac3ea23f536
Reviewed-on: https://code.wireshark.org/review/8067
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Show all expert messages in a combined view. Group top-level items by a
(severity, group, protocol) tuple.
Let the user enable and disable messages via a check menu.
Add ProtoTree::goToField and expert_info_t.hf_index. Use them to jump to
what we hope is the afflicted item.
Enable the context menu only if the user has selected a packet item.
Add a free-form search field that matches expert summaries.
This differs from the GTK+ version but hopefully provides a smoother
workflow.
Bug: 10931
Change-Id: Ia12cb7c27cdea1634fa2798fb7e4c1b23bd16ad2
Reviewed-on: https://code.wireshark.org/review/8294
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Implementing a button in the interface list, to bring up
the extcap options dialog, as well as a dialog, which will
be generated depending on the selected extcap options.
Change-Id: I1733dc6a8c1a121089a9c353aff10bc4a53e86de
Reviewed-on: https://code.wireshark.org/review/8224
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
on_actionExternalMenu_triggered() triggered a warning, as no menu
exists on the automatic UI configuration.
Change-Id: Ic3dc4c2c9e4c95ec4bbea01bd53af9a8c831e0d7
Reviewed-on: https://code.wireshark.org/review/8276
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Add a pointer to the callback, which will provide an enum value,
for each calling GUI entity, as well as a pointer to the main
structure for that entity.
For Qt this can be used for instance, to connect to slots of the
main instance, to update a calling dialog.
Change-Id: Ifa6b04f868512574de53b6bce507e343f6e219d4
Reviewed-on: https://code.wireshark.org/review/8085
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Plugins may utilize the tap interface to provide special tools
or analysis options, not otherwise available in Wireshark, or
perhaps not allowed to be distributed freely. Up until now, those
tools either had to start automatically, or could not be started
at all, or had to be started separately.
It should be possible, that those tools may be started using a
menu entry directly from Wireshark. This interface tries to achieve
exactly that.
This interface uses a clean interface, which can be implemented in
any plugin or dissector. Documentation for this has been added to
README.plugins.
Separators are only supported for now in the Qt interface, but
URLs can now be added as a simple item, and the UI will use the
same methods used for other URL calls to open them.
Change-Id: I170107dafb66f6badaa864d05a9091e5cbbf52c2
Reviewed-on: https://code.wireshark.org/review/7865
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The idea is allow to copy data from GUI by user,
what is currently case only for tshark.
The first option copy every item from Packet Details that are expanded (visibled).
The second option do the same but start on currently selected item/tree.
(let think about protocols like BT SDP where there is a lot of recursive subtrees)
Change-Id: I19c925d21293ceb8af2167c7d2c1b1b36507124e
Reviewed-on: https://code.wireshark.org/review/8047
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
The capture timer was never enabled on capture start or disabled on
capture stop. This is now implemented.
Bug: 10601
Change-Id: Iae23a952986a2c5dddf92b6ac0d1f1bc1c83719c
Reviewed-on: https://code.wireshark.org/review/7582
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add file_size_to_qstring and use it to show the file size. Add a
"shrinkable" property to LabelStack. Make the info status shrinkable.
Elide text so that long file paths don't widen the main window.
Change-Id: Ieb1caaf7e016384609d41fcabaa63d8f7a293eff
Bug: 10949
Reviewed-on: https://code.wireshark.org/review/7534
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Wireshark QT will close current opened file when popup open dialogue (File -> open), instead of keeping current file opened till new file is to be opened
Bug: 10962
Change-Id: I2062514ae648c95492e0160953c80d5303b8aba2
Reviewed-on: https://code.wireshark.org/review/7452
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Move the "find the frame" stuff to openPacketDialog(), and don't even
bother creating a new PacketDialog if we don't find the frame. This
should squelch Coverity CID 1270934, by giving up quickly if fdata is
null.
Change-Id: I4605ba7e271a55724f02cafed4122f9dd9b1b6f7
Reviewed-on: https://code.wireshark.org/review/7467
Reviewed-by: Guy Harris <guy@alum.mit.edu>