used with shared libraries, to fix some error that shows up in some
cases; some Apple documentation recommends it for most shared libraries.
svn path=/trunk/; revision=20312
returned quite a list of files. Add them to MAINTAINERCLEANFILES.
Whitespace changes (replace multiple spaces by TABs, in a few cases this
needed to be done at the beginning of Makefile lines.
svn path=/trunk/; revision=14891
they have LF at the end of the line on UN*X and CR/LF on Windows;
hopefully this means that if a CR/LF version is checked in on Windows,
the CRs will be stripped so that they show up only when checked out on
Windows, not on UN*X.
svn path=/trunk/; revision=11400
a not-yet-ready-for-prime-time project of mine (fast random access to
gzipped files, plus an mechanism to allow support for other forms of
compression).
svn path=/trunk/; revision=8221
the MS Visual Studio debugger, get confused by two files with the same
name being in a program's source, even though they're in different
directories.
svn path=/trunk/; revision=8208
Makefile.am:99: `YFLAGS' is a user variable, you should not override it;
Makefile.am:99: use `AM_YFLAGS' instead.
Fix it in the proposed way.
svn path=/trunk/; revision=7582
stuff I sent out in a mail message to somebody asking how to add support
for a new file format, but hopefully it'll get improved by various
contributors over time (hint hint).
svn path=/trunk/; revision=7397
into Wiretap, so that if you read a frame from Wiretap you have what
traffic type information could be gleaned from the information in the
capture file, and can write the frame out to a capture file where the
file contains some or all of that information without having to
determine it outside of Wiretap.
svn path=/trunk/; revision=5314
Nisbet.
Make a comment in "wiretap/file.c" clearer, so people know where to put
the entries for their capture file type.
svn path=/trunk/; revision=4328
Update the lists of known capture file formats in the Tethereal,
editcap, and mergecap man pages to match the current list (as found in
the Ethereal man page).
svn path=/trunk/; revision=4039
1) aclocal expects autoconf/automake macros to be hidden;
2) GTK+ hid its autoconf/automake macros;
and, if both places exist but aren't the same directory, returns a "-I"
flag to tell aclocal to look in GTK+'s directory.
Then have "autogen.sh", and Makefiles in directories with "acinclude.m4"
files, use that script and pass what flag it supplies, if any, to
aclocal.
This should, I hope, avoid problems such as those FreeBSD systems where
GTK+ was installed from a port or package (and thus stuck its macros in
"/usr/X11R6/share/aclocal") but aclocal doesn't look there.
(It doesn't solve the problem of somebody downloading and installing,
say, libtool from source - which means it probably shows up under
"/usr/local", with its macros in "/usr/local/share/aclocal" - on a
system that comes with aclocal (meaning it probably just looks in
"/usr/share/aclocal", but that may be best fixed by, whenever you
download a source tarball for something that's part of your OS,
configuring it to install in the standard system directories and
*overwriting* your OS's version.)
svn path=/trunk/; revision=2165
standard output, in the rules to get Flex to produce scanner code; that
way, if Flex fails to run for some reason, we don't leave around a
zero-length or otherwise incorrect "XXX-scanner.c" file that might
keep a subsequent make from thinking it has to generate that file.
svn path=/trunk/; revision=1763
hideous problem on FreeBSD 3.[23] (and perhaps other BSDs) if
HAVE_UNISTD_H is defined before "zlib.h" is included, turn "file_seek()"
into a subroutine defined in a file that *undefines* HAVE_UNISTD_H
before including "zlib.h", so that the *only* call to "gzseek()" is made
from a file that does not have HAVE_UNISTD_H defined when it includes
"zlib.h".
Move "file_error()" to that file while you're at it, so it holds all the
wrappers that hide the presence or absence of zlib from routines to read
capture files.
Turn "file.h", which declared those wrapper functions as well as wrapper
macros, into "file_wrapper.h" - it belongs with the "file_wrapper.c"
file that defines the wrapper functions, not with "file.c" which handles
higher-layer file access functions.
Remove the comment in "configure.in" that explained why defining
HAVE_UNISTD_H was a bad idea, as we're not obliged to define it and work
around the problem. (The comment in "file_wrapper.c" explains the
workaround.)
svn path=/trunk/; revision=1463
line of ISDN routers. Much like the ascend reader, this module reads an
ASCII hex dump of trace data.
Rearranged the order in which wiretap tries trace files, to keep the
ASCII-readers (ascend and toshiba) at the end, and put the binary-readers
(everything else) at the front of the list. If a telnet session of
and ascend trace or toshiba trace were captured near the beginning of
another trace, wiretap might think the trace was ascend or toshiba if it
tried that module first.
Fixed the way wtap_seek_read() selects functions to call. It was using
the encap type instead of the file type. We got lucky because
WTAP_ENCAP_ASCEND == WTAP_FILE_ASCEND
svn path=/trunk/; revision=952
more display filters for X.25;
no LCN in X.25 RESTART / DIAGNOSTIC / REGISTRATION packets;
support for nettl file format (nettl is a trace tool for HP-UX).
For now, it only supports traces for X.25 interfaces (tested
with HP-UX 10.20).
svn path=/trunk/; revision=879
family has a set of debug commands that allow you to log the traffic on a
WAN or dialup connection as text, e.g.
RECV-iguana:241:(task: B04E12C0, time: 1975358.50) 15 octets @ 8003D634
[0000]: FF 03 00 3D C0 06 C9 96 2D 04 C1 72 00 05 B8
Created wtap_seek_read() which parses the textual data for and Ascend
trace, and does a normal fseek() and fread() for any other file type.
The fseek()/fread() pairs in file.c were replaced with the new function.
svn path=/trunk/; revision=652
this causes "Makefile.in" to have two GPL notices - "Makefile.in" and
the "Makefile" generated from it are generated files, so maybe that's
OK).
svn path=/trunk/; revision=639
wiretap support for RADCOM Ltd.'s WAN/LAN analyzers (see
http://www.radcom-inc.com/
). Note: as I remember, IEEE 802.2/ISO 8022 LLC has somewhat of an SDLC
flavor to it, just as I think LAP, LAPB, LAPD, and so on do, so we may
be able to combine some of the LLC dissection and the LAPB dissection
into common code that could, conceivably be used for other SDLC-flavored
protocols.
Make "S" a mnemonic for "Summary" in the "Tools" menu.
Move the routine, used for the "Tools/Summary" display, that turns a
wiretap file type into a descriptive string for it into the wiretap
library itself, expand on some of its descriptions, and add an entry for
files from a RADCOM analyzer.
Have "Tools/Summary" display the snapshot length for the capture.
svn path=/trunk/; revision=416
suggestion, this new method using a static array should use less memory
and be faster. It also has a nice side-effect of making the source-code
more readble, IMHO.
Changed the print routines to look for protocol proto_data instead of
looking at the text label as they did before, hoping that the data hex
dump field item starts with "Data (".
Added the -G keyword to ethereal to make it dump a glossary of display
filter keywords to stdout and exit. This data is then formatted with
the doc/dfilter2pod perl program to pod format, which is combined
with doc/ethereal.pod.template to create doc/ethereal.pod, from which
the ethereal manpage is created. This way we can keep the manpage up-to-date
with a list of fields that can be filtered on.
svn path=/trunk/; revision=364
mechanism that is built into ethereal. Wiretap is now used to read all
file formats. Libpcap is used only for capturing.
svn path=/trunk/; revision=342
proto*() functions. The configure script tries to use ipv6 name resolution if
it knows the type of ipv6 stack the user has (this can be avoided with the
--disable-ipv6 switch) Additionally, the configure script now deals with wiretap
better. If the user doesn't want to compile wiretap, the wiretap is never
visited. A few unnecessary #includes were removed from some wiretap files, and
a CPP macro was moved from bpf.c to wtap.h.
svn path=/trunk/; revision=229