We handle translations in QtTranslation.wxs so we need to skip them when
generating QtDependentComponents.wxs.
Change-Id: I05586c7f8fbbaf72fc30564a157ba1175154d1d3
Reviewed-on: https://code.wireshark.org/review/25459
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Put different types of plugins (libwiretap, libwireshark) in different
subdirectories, give libwiretap and libwireshark init routines that
load the plugins, and have them scan the appropriate subdirectories
so that we don't even *try* to, for example, load libwireshark plugins
in programs that only use libwiretap.
Compiled plugins are stored in subfolders of the plugin folders, with
the subfolder name being the Wireshark minor version number (X.Y). There is
another hierarchical level for each Wireshark library (libwireshark, libwscodecs
and libwiretap).
The folder names are respectively plugins/X.Y/{epan,codecs,wiretap}.
Currently we only distribute "epan" (libwireshark) plugins.
Change-Id: I3438787a6f45820d64ba4ca91cbe3c8864708acb
Reviewed-on: https://code.wireshark.org/review/23983
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
This sets the scope of the static build option to Wireshark support
libraries only.
Before the patch:
Static plugins don't work with CMake and autotools.
autotools static build is broken, and most likely will always be, as
building Wireshark all-static is difficult and time-consuming.
After the patch:
For CMake Wireshark will be built with static or shared libraries and
dynamic plugins. Everything just works. CMake apparently doesn't want
you building static and shared libraries at the same time.
For autotools Wireshark will be built with shared libraries by default.
--disable-shared and --enable-static options work as usual. Dlopened
plugins are not built if --disable-shared is given to configure (to
disable shared libraries). This is a limitations imposed by libtool.
Tested on Linux. This removes broken support for building plugins
statically.
Change-Id: Ib8e8176976f136eea93a2ce8f9857b6cf9bec64c
Reviewed-on: https://code.wireshark.org/review/24241
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Set NTDDI_VERSION and _WIN32_WINNT to their Vista values so that
ws2tcpip.h will define inet_pton and inet_ntop. Remove the associated
compiler version checks so that everyone is on the same page.
Add breadcrumbs to the various parts of the code where we set a minimum
Windows version.
Change-Id: I83bba5fa1024bfbc02e07b120412807ad259e291
Reviewed-on: https://code.wireshark.org/review/24080
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
... not to be confused with "machine-to-machine".
M2M seems to be a simple Wimax encapsulation protocol developed by Intel.
It's not documented publicly anywhere that I can find. The boilerplate to
code ratio is huge and it even includes a complete source file from the Wimax
dissector (yuck). Put it in the Wimax plugin instead.
Minor version number bump for wimax plugin.
Change-Id: I2694339dfe89be334093b257a5b34d1577f4dc20
Reviewed-on: https://code.wireshark.org/review/23790
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Also add ntar file extention to wix installer to match nsis
Change-Id: Idb6f660fda27c6ad3c3cd70acd482eafa2c14307
Reviewed-on: https://code.wireshark.org/review/23656
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Put plugins in CMake build dir with a version subdir. This avoids some
weird special cases, however running with autotools from build dir
displays the wrong global folder in about->folders. Unfortunately
the hack to run from the autotools build dir is troublesome.
Various fixes for Windows builds.
Try to fix also build dir issue loading plugins on macOS with
ENABLE_APPLICATION_BUNDLE (blind).
Change-Id: Ic3c7c21f5850c12a53844202d61fa0592b45739c
Reviewed-on: https://code.wireshark.org/review/23657
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: João Valverde <j@v6e.pt>
Instead of trying to ship README.md, convert its line endings and make
sure the result is named README.txt.
Change-Id: I4e081587c73342b01633b3a31ea03068e3fc1733
Reviewed-on: https://code.wireshark.org/review/23098
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
That's a separate README file for this directory, and its name is
README, not README.md like the top-level README file.
Change-Id: I9ec920de6a844441e00d4608608563bc4ddd8349
Reviewed-on: https://code.wireshark.org/review/23096
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Convert the contents of the top-level README to Markdown and give it a
.md extension. Most of our documentation is plain text or AsciiDoc, but
the top-level README file in a Git repository is special in that many
online browsers will show the README contents along with the directory
listing and those browsers tend to favor Markdown. This is true of
GitHub (which we're currently mirroring to), Gerrit via its Gitiles
plugin (which we're not yet using but likely will), and other places.
Add "foreign" to AM_INIT_AUTOMAKE. There is probably a joke to be
made here about the FSF and border walls.
Change-Id: I87c306d74864e1f0a432225b160a1b4483ee946c
Reviewed-on: https://code.wireshark.org/review/23049
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Having two distinct logical concepts (OUI and Well Known Address)
concatenated to a single "manuf" file is needlessly obfuscating
the WKA feature.
Have a distinct "wka" file instead and just skip the cat.
Change-Id: I46f53b0015a37331d65f8cfac7cbbd499dd0c5b8
Reviewed-on: https://code.wireshark.org/review/22742
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Rename "enterprises" to "enterprises.tsv" so that its format is a bit more
obvious and so that double-clicking the file might do something useful.
Add it to the Windows packages.
Change-Id: I5ef54a04ce1b4926aa4535e756e04b3e2a56d463
Reviewed-on: https://code.wireshark.org/review/22616
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Look for our merge module using find_path. This should be more reliable
and doesn't assume our build and target platforms are the same.
Change-Id: I95a4454a063af2f978550b8cf1f1624c4aeb5ebc
Reviewed-on: https://code.wireshark.org/review/22426
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Bug: 13825
Change-Id: Ibda27599739a26a388e1c66ae813ff5c2c8339be
Reviewed-on: https://code.wireshark.org/review/22367
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Set the merge module path based on our platform and version of Visual
Studio.
Change-Id: Ic866447f36d5264d61fc988f3f9d8b4d2e5c0827
Reviewed-on: https://code.wireshark.org/review/22192
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The Windows builders now use Visual Studio 2015.
Change-Id: I0fe4defd090930a0b8531e544d03ad4f3b36dac1
Reviewed-on: https://code.wireshark.org/review/22018
Reviewed-by: Gerald Combs <gerald@wireshark.org>
(cherry picked from commit 316d09a5aee68904ba0348c2017647b4dea3aab1)
Reviewed-on: https://code.wireshark.org/review/22019
This can be used by dissectors that need to parse out-of-band
configuration.
Change-Id: I13c0a2f408fb5c21bad7ab3d7971e0fa8ed7d783
Reviewed-on: https://code.wireshark.org/review/20912
Reviewed-by: Roland Knall <rknall@gmail.com>
Add plugin to autofoo and CMake build systems and fix errors found
Add plugin to Windows installer (optional component activated by default)
Change-Id: Id1b777bdee04e53076b3291f6fb68d5abad6985d
Reviewed-on: https://code.wireshark.org/review/19228
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Integrate the Spandsp library for G.722 and G.726 support. Adds support
for G.722 and all eight variants of G.726.
Note: this also fixes a crash in Qt (buffer overrun, reading too much
data) caused by confusion of the larger output buffer (resample_buff)
with the smaller input buffer (decode_buff). It was not triggered before
because the sample rate was always 8k, but with the addition of the new
codecs, a different sample rate became possible (16k).
Fix also a crash which occurs when the RTP_STREAM_DEBUG macro is enabled
and the VOIP Calls dialog is opened (the begin frame, start_fd, is not
yet known and therfore a NULL dereference could occur).
Passes testing (plays normally without bad RTP timing errors) with
SampleCaptures files: sip-rtp-g722.pcap and sip-rtp-g726.pcap. Tested
with cmake (Qt), autotools (Qt and GTK+) with ASAN enabled.
Bug: 5619
Change-Id: I5661908d193927bba50901079119eeff0c04991f
Reviewed-on: https://code.wireshark.org/review/18939
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
When we add our Qt to PATH, prepend it so that it will be found first.
Change-Id: I405496d6a08d676b5a2e0d9bd792de7ba9abe7f9
Reviewed-on: https://code.wireshark.org/review/18988
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Try enabling the MajorUpgrade:AllowSameVersionUpgrades attribute. This
should keep the .msi packages from installing side by side when only
the micro version differs.
Change-Id: I37e8971d965ec1909c6baacb55d6a8062b13ff70
Reviewed-on: https://code.wireshark.org/review/17945
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Enable and disable the Wireshark and Wireshark-gtk desktop icon and
shortcut checkboxes depending on our feature selections to match the
NSIS installer behavior (and make sense).
Set the level of "Fe.WiresharkGTK" to 2 so that it's disabled by default.
This roughly matches the behavior of the NSIS installer.
Note that we can't enable or disable radio buttons.
Change-Id: I1c73f901344e21bd62e67890ce544f644c0cdda6
Reviewed-on: https://code.wireshark.org/review/17898
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The condition expressions in g630b646 were incorrect. Fix them. This
also lets us make the error messages more verbose, so do so. Add a hint
about debugging.
Change-Id: I74d4b9cfb1bc9afb23be4d61ac190f90e7048745
Reviewed-on: https://code.wireshark.org/review/17849
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: Iae2a222db8e9359fd8440b59f43ec90c3b7f8243
Reviewed-on: https://code.wireshark.org/review/17747
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Look for an existing NSIS installation and cancel the installation if
we find one. Add a note about making this process more friendly.
Change-Id: Id6ea4d511bc813a38fa834931f5e677d3d6a4319
Reviewed-on: https://code.wireshark.org/review/17702
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gilbert Ramirez <gram@alumni.rice.edu>
Note that you should probably uninstall the NSIS package first if it's
installed. Set the compression level to "high".
Change-Id: I10de8df580f8410fd13cdf414db1b1812a9fcf02
Reviewed-on: https://code.wireshark.org/review/17566
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Use our normal application icon in "Programs and Features".
Change-Id: I480fcd16b9de1b58852ee8fb5226062da8ed7419
Reviewed-on: https://code.wireshark.org/review/16768
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Append the platform and version to the WiX installer name similar to
our other installers.
Change-Id: Idb3e7917dda3a8e831062538d3e7d1b1c8b78d42
Reviewed-on: https://code.wireshark.org/review/16757
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Move g_spawn to separate file and implement functions to
use Windows based method of spawning, instead of the glib
based version
Change-Id: Ibae03d834ec86531eba37dc8768fbf17ddadf57f
Reviewed-on: https://code.wireshark.org/review/16049
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
This aligns the name with what is done for other Wireshark shared libraries.
Moreover it allows to compile a wiretap plugin once per major release, without
the need to recompile it each time ${PROJECT_VERSION} changes (each nightly
build / official release).
Change-Id: I53c82277223a4f323079cf695168ac85c2fba523
Reviewed-on: https://code.wireshark.org/review/16058
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
(As pointed out by Gerald) .pfx files are (more commonly) PKCS#12 files.
People may be upset if we start grabbing them.
Change-Id: Iecf857d082b7f2a0ad4fdd1a932332fc3c9d9498
Reviewed-on: https://code.wireshark.org/review/15886
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: Ia07cb14995c3f06d8a32330209bb17fde344350a
Reviewed-on: https://code.wireshark.org/review/15688
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Register Wireshark for PacketLogger, ERF, IPFIX, and VWR files on
freedesktop.org, OS X, and Windows (we were already registered for ERF and VWR
files on Windows).
Change-Id: I8105997cb15ea06e1c078489fd88763d4ce9e40c
Reviewed-on: https://code.wireshark.org/review/15635
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add initial Wireshark-branded artwork to the WiX installer.
Change-Id: I1997023784112890f5366a577ca3b8101be530da
Reviewed-on: https://code.wireshark.org/review/15383
Reviewed-by: Michael Mann <mmann78@netscape.net>
copy/paste error missed ${LIBSSH_DLL} when looping second time.
Change-Id: Iccb32c0d32b328828e4da13f745fb0bc9bdc16ae
Reviewed-on: https://code.wireshark.org/review/15395
Reviewed-by: Michael Mann <mmann78@netscape.net>
Gerald Combs