1. If there's no character encoding (ENC_ASCII, ...) specified
then use ENC_ASCII.
2. For all but FT_UINT_STRING, always use ENC_NA
(replacing any existing True/1/FALSE/0
/ENC_BIG_ENDIAN/ENC_LITTLE_ENDIAN).
svn path=/trunk/; revision=39426
Specifically: Replace FALSE|0 and TRUE|1 by ENC_BIG_ENDIAN|ENC_LITTLE_ENDIAN as
the encoding parameter for proto_tree_add_item() calls which directly reference
an item in hf[] which has a type of:
FT_BOOLEAN
FT_IPv4
FT_EUI64
FT_GUID
FT_UINT_STRING
Also: For type FT_ITv6 use ENC_NA. (This was missed in SVN #39260)
svn path=/trunk/; revision=39328
FT_NONE
FT_BYTES
FT_IPV6
FT_IPXNET
FT_OID
Note: Encoding field set to ENC_NA only if the field was previously TRUE|FALSE|ENC_LITTLE_ENDIAN|ENC_BIG_ENDIAN
svn path=/trunk/; revision=39260
keys to have _uint in their names, to match the routines that handle
dissector tables with string keys. (Using _port can confuse people into
thinking they're intended solely for use with TCP/UDP/etc. ports when,
in fact, they work better for things such as Ethernet types, where the
binding of particular values to particular protocols are a lot
stronger.)
svn path=/trunk/; revision=35224
Remove a bunch calls to of check_cols();
Use tfs_set_notset from tfs.c instead of a locally defined tfs struct;
Use consistent indentation;
Adjust spacing on some lines and reformat a few long lines.
svn path=/trunk/; revision=29895
but (since the patch no longer applied cleanly) essentially manually
re-implemented by me:
Rename "stun" to "classic stun" and "stun2" to "stun", to follow the usage
defined in draft-ietf-behave-rfc3489bis-18 section 2.
svn path=/trunk/; revision=29884
(1) Trailing/leading spaces are removed from 'name's/'blurb's
(2) Duplicate 'blurb's are replaced with NULL
(3) Empty ("") 'blurb's are replaced with NULL
(4) BASE_NONE, NULL, 0x0 are used for 'display', 'strings' and 'bitmask' fields
for FT_NONE, FT_BYTES, FT_IPv4, FT_IPv6, FT_ABSOLUTE_TIME, FT_RELATIVE_TIME,
FT_PROTOCOL, FT_STRING and FT_STRINGZ field types
(5) Only allow non-zero value for 'display' if 'bitmask' is non-zero
svn path=/trunk/; revision=28770
Specifically: when dissect_rtp_heur calls the stun dissector:
- Don't do a 'data' dissection if stun dissection fails;
(ie: use call_dissector_only instead of call_dissector).
- return the stun dissector success/fail status to the caller of dissect_rtp_heur;
(Done by registering and calling the heuristic version of the stun dissector).
Also: use call_dissector_only for each of the dissectors called by dissect_rtp_heur
(altho it really makes no difference at this point except for the call to the
stun dissector).
svn path=/trunk/; revision=27443
When offset parameter is 0 replace tvb_bytes_exist() with the faster tvb_length().
On the other hand
if (tvb_bytes_exist(tvb, 0, 20)
is more readable than
if (tvb_length(tvb) >= 20
so only do it in heuristic function
svn path=/trunk/; revision=23412
TR-111, from the DSL-Forum adds two options to STUN (RFC 3489) to help
with TR-069 enabled devices traverse firewalls. TR-111 can be read here:
http://www.dslforum.org/techwork/tr/*TR-111*.pdf
This patch adds support for decoding the two optional STUN attributes
used by TR-111. One is simply a zero-length attribute, and the other a
string attribute.
Me: Changed stun.att.connection.request.binding to
stun.att.connection_request_binding
svn path=/trunk/; revision=22019
This patch shows (as extra, generated fields) what the address and port will be after XORing again with the transaction ID. I've done IPv4, but don't have any IPv6 captures to test with...
svn path=/trunk/; revision=17126
This patch for the STUN dissector fixes a bug (wrong value for DATA_INDICATION attribute) and adds the decoding of IPv6 address in attributes.
svn path=/trunk/; revision=17078
This is a patch that add support for the latest drafts[1] in the STUN dissectors. I choose to add TURN directly in the STUN dissector instead of creating a new dissector because of the decision at the latest IETF meeting[2] to redefine TURN as an use case of STUN.
[1] ftp://ftp.rfc-editor.org/in-notes/internet-drafts/draft-ietf-behave-rfc3489bis-02.txt
ftp://ftp.rfc-editor.org/in-notes/internet-drafts/draft-rosenberg-midcom-turn-08.txt
ftp://ftp.rfc-editor.org/in-notes/internet-drafts/draft-camarillo-midcom-turn-ipv6-00.txt
[2] http://www3.ietf.org/proceedings/05nov/minutes/behave.txt
svn path=/trunk/; revision=16797
stun - add support for 3 extra Message Attributes as described in draft-ietf-behave-rfc3489bis-00
ymsg
- avoid looking beyond the tvb while looking for content item delimiters (causing most frames to be shown as malformed packet)
- makes content items (and their keys and values) filterable (includes fix to bug 415)
svn path=/trunk/; revision=16005
-use g_snprintf instead of sprintf and snprintf
-use g_strdup_printf where appropriate
-remove #include "snprintf.h" (as only g_snprintf should be used)
-replace some more alloc/realloc/calloc/free with their glib pendants
svn path=/trunk/; revision=15264
add a "match_strval_idx()" routine that does the same thing, and have
"match_strval()" call it.
Make those routines, and "val_to_str()", return a "const" pointer.
Update dissectors as necessary to squelch compiler warnings produced by
that.
Use "val_to_str()" rather than using "match_strval()" and then, if the
result is null, substituting a specific string. Clean up some other
"match_strval()"/"val_to_str()" usages.
Add a null pointer check in the NDPS dissector's "attribute_value()"
routine, as it's not clear that "global_attribute_name" won't be null at
that point.
Make some global variables in the AFS4INT dissector local.
Make some routines not used outside the module they're in static.
Make some tables "static const".
Clean up white space.
Fix Gerald's address in some files.
svn path=/trunk/; revision=14786
don't dissect attributes if there aren't any;
put each attribute into a subtree;
register the dissector by name.
Use "match_strval()" to check whether the message type is a known STUN
message type, and to generate the message type for the Info column.
Don't use "tvb_bytes_exist()" to check when we run out of data - use the
length fields from the packet. Check the sanity of those lengths, too.
svn path=/trunk/; revision=13063
Also move ncp222.py, x11-fields, process-x11-fields.pl,
make-reg-dotc, and make-reg-dotc.py.
Adjust #include lines in files that include packet-*.h
files.
svn path=/trunk/; revision=11410
Jakub Zawadzki