- Decoders for the few remaining FC protocols not included in my first
patch. Included in this list are decoders for FC-CT (common transport),
Name Server (dNS), Fabric Configuration Server (FCS) and Zone Server
(FZS).
- Decoder for MDS Debug Port Adapter. MDS Debug Port Adapter (internal
name was Boardwalk and this is the file name) is a piece of hardware
that can be purchased with Cisco's MDS Fibre Channel switches that
converts FC frames into Ethernet frames. One end is connected to a
port on a FC switch and the other end is connected to a FE/GE Ethernet
port. The decoder included here decodes the encapsulation header that
carries information such as SOF/EOF of FC frames.
svn path=/trunk/; revision=6919
The Q bit in X.25 doesn't mean "this is QLLC traffic", it's just a "this
packet is special" indication. Have the X.25 dissector pass as the
"private_data" pointer a pointer to a gboolean indicating whether the Q
bit was set or not. Replace the "decode non-Q-bit traffic as SNA"
option with a "decode traffic as QLLC/SNA if we didn't see the Call
Request packet and thus don't know what it is" option, which hands
traffic to the QLLC dissector for that traffic. Have the QLLC dissector
hand traffic to the SNA dissector if the Q bit isn't set.
Arrange that we determine whether the Q bit is set regardless of whether
we're building the protocol tree or not.
If we don't just dissect traffic as QLLC/SNA if we didn't see the Call
Request packet, check not only for 0x45 (as an indication that it's
probably IP), check also for NLPID_ISO8473_CLNP and treat that as an
indication that it's probably OSI CLNP.
svn path=/trunk/; revision=6854
make ANSI point codes filterable in MTP3;
fix a bug in the ANSI SLS dissection;
have MTP3 store the SI for use by subdissectors;
add a new MTP3-Management dissector.
Fix Makefile.nmake to include the Wellfleet HDLC dissector.
svn path=/trunk/; revision=6837
using NTLMSSP version 1.
Show stub data as such for all requests and replies where we can't
dissect the stub data as a request or reply for some DCERPC-based
protocol.
svn path=/trunk/; revision=6825
The MD5 is copyrighted by L. Peter Deutsch, and released under the same
license as zlib. It is GPL-compatible, and should NOT have the GPL
applied to it.
svn path=/trunk/; revision=6790
header.
Add overflow checks to "BYTES_ARE_IN_FRAME()", and cast all arguments to
unsigned values (negative values should never be passed) to squelch
compiler warnings.
svn path=/trunk/; revision=6567
Using this command line option you canb now place any arbitrary display-filter fields on the COL_INFO line.
Assume you want NFS dissector in tethereal to put ALL filehandle hashes (nfs.fh.hash) on COL_INFO.
No worries, just add
-z proto,colinfo,nfs.fh.hash,nfs.fh.hash
as a parameter to tethereal.
Never again do you need to hack tethereal and recompile just because you want some extra info on the COL_INFO line.
svn path=/trunk/; revision=6560
Similar to what is available on ethereal:/Tools/ProtocolHierarchyStatistics
but this one can handle ALL protocols that tethereal has dissectors for.
Maybe a gtk/gtk2 version of this should replace the existing one in ethereal?
Try -z io,phs or -z io,phs,<filter> to test it.
svn path=/trunk/; revision=6532
and generate the table of stuff to register from tap source files, so
Tethereal doesn't need to know what tap listeners exist.
Get rid of "tap-xxx.h" files, as they're now empty.
Add "tethereal-tap-register.c" to the .cvsignore file, as it's a new
generated file.
Update "Makefile.nmake" to generate "tethereal-tap-register.c".
Clean up "Makefile.am" and "Makefile.nmake" a bit.
svn path=/trunk/; revision=6525
WTAP_ENCAP_ISDN encapsulation type, which includes a pseudo-header
giving the direction (user-to-network or network-to-user) and the
channel number.
Add a new circuit type, using the ISDN channel number as the circuit ID.
Add an ISDN dissector to put the direction and channel number into the
protocol tree and to call the appropriate dissector for the payload
based on the channel (LAPD for the D channel; V.120, PPP, or data for B
channels, based on some heuristics).
svn path=/trunk/; revision=6521
In gtk/main.c and tethereal.c set MIBDIRS to <get_program_path()>\snmp\mibs
so that we can drop the MIB files there, instead of the default c:\usr\...
path.
Add NET_SNMP_DIR to config.nmake and modify Makefile.nmake to adjust
CFLAGs, ethereal_LIBS and tethereal_LIBS accordingly.
Define HAVE_UCD_SNMP in config.h.win32.
I tested this by creating c:\program files\ethereal\snmp\mibs and
dropping in the MIB files that come with Net-SNMP. Ethereal resolved
system.sysDescr.0 to "iso.3.6.1.2.1.1.1.0" under Windows. Under Linux
it resolved to "SNMPv2-MIB::sysDescr.0".
Ethereal.nsi still needs to be updated.
A compiled version of the Net-SNMP library can be found at
http://www.ethereal.com/distribution/win32/development/
svn path=/trunk/; revision=6385
problem. The win2k DNS MMC snap-in generates calls to this pipe.
There appear to be three calls which have been implemented as stubs
for the moment.
svn path=/trunk/; revision=6277
and the "gtk" and "gtk2" directories, so that we find "zlib.h", as we
now define "HAVE_ZLIB" in the top-level "config.h.win32" and thus try to
include "zlib.h" on Windows.
svn path=/trunk/; revision=6246
files, and have it get rid of "x11-declarations.h" and
"x11-register-info.h". Also, don't delete "packet-ncp2222.c" with "make
clean", just with "make distclean", and get rid of a duplicate
"register.c" in the list of files removed by "make clean".
svn path=/trunk/; revision=6244
One example extension is rpcstat.
Try -Z rpc,rtt,100003,3 as argument to tethereal when reading a capture
containing NFSv3 packets.
tap-rpcstat.[ch] is intended to demonstrate the api and can be used to
base other extensions on.
svn path=/trunk/; revision=6175
following changes:
- Inserted packet-tds.h This is personal taste because of the many
files in the toplevel directory. Whoever works on this next is
free of course to separate it back out again.
- Removed unused includes sys/types.h, snprintf.h, netinet/in.h
- #if-0 unused function
- Removed duplicate define
- Declared all unused parameters as such
- Changed a // comment into /* */
- ifdef-DEBUG a printf statement
svn path=/trunk/; revision=6025
A little work still needs to be done on the new NCP dissector -- make
some of the COL_INFO texts more useful, handle a Unicode issue, and
modify some of the cases that use "request conditions".
But the NCP dissector as it stands is very usable now.
Note: I didn't merge in the PROTO_LENGTH_UNTIL_END macro... I wanted
to think about the various possible macros and review an email conversation
I had with Guy on the subject.
svn path=/trunk/; revision=5432
"packet-dcerpc-nt.c", and registers "dcerpc_smb_init()" as an
initialization routine. Take the ett_ registration out of the latter
routine, and also take out the "do this only once" stuff.
Get rid of the initialization routines for netlogon, samr, and spoolss;
they just call "dcerpc_smb_init()", which is now an initialization
routine of its own.
The policy hash initialization should be done before every capture, so
it should be done in an initialization routine, and should not do any
"do this only once" stuff. It should also be called only once before
every capture, rather than 3 times.
The ett_ initialization should, however, be done at the same time all
other ett_ initialization is done - at protocol registration time - so
it should be done in a "proto_register_" routine.
This fixes a bug I saw wherein
1) the tree for Unicode strings was open by default
and
2) if you closed one and then exited, Ethereal would crash.
The problem is that "proto_register_subtree_array()" doesn't expand the
array, it just bumps the number of registered ett_ values; the array is
allocated in "proto_init()". As such, if you register ett_ values with
"proto_register_subtree_array()" *after* "proto_init()" is called - and,
even for the first capture, initialization routines are called after
"proto_init()" is called - you will get ett_ numbers that go past the
number of elements in the array.
Move the declaration of "ett_nt_unicode_string" to "packet-dcerpc-nt.h",
as it's exported from "packet-dcerpc-nt.c".
Get rid of the declaration of "dcerpc_smb_init()" in
"packet-dcerpc-nt.h", and make it static, as it's no longer called from
outside "packet-dcerpc-nt.c".
svn path=/trunk/; revision=5196
In the "configure.in" files, add
-D_U_="__attribute__((unused))"
to CFLAGS if we're using GCC, and add
-D_U_=""
otherwise, so _U_ can be used to mark arguments as unused.
Add -D_U_="" arguments to the Makefile.nmake files as well, so _U_ works
with Microsoft Visual C++ as well.
Add comments and RCS IDs to the Makefile.nmake files that don't already
have them.
svn path=/trunk/; revision=4824
Guy Harris