Started by grepping call_dissector_with_data, call_dissector_only and call_dissector and traced the handles passed into them to a find_dissector within the dissector. Then replaced find_dissector with find_dissector_add_dependency and added the protocol id from the dissector.
"data" dissector was not considered to be a dependency.
Change-Id: I15d0d77301306587ef8e7af5876e74231816890d
Reviewed-on: https://code.wireshark.org/review/14509
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Some of the ASN.1 dissectors still generate a new_create_dissector_handle from the tool itself, so leave those for now.
Change-Id: Ic6e5803b1444d7ac24070949f5fd557909a5641f
Reviewed-on: https://code.wireshark.org/review/12484
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Parse and display NetSwitch and SubSwitch fields, treating 0x00 and 0x7f
as "special" values with meaning beyond what is usually offered by these
fields.
Change-Id: Idf94361793441f5f4b32c23e7f7f9250ed952a37
Reviewed-on: https://code.wireshark.org/review/12279
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Added flag to Command field in ArtIpProg and introduced new Status field
in ArtIpProgReply.
Change-Id: I88363eb83646953ae5a01faebe88b4016db09ba0
Reviewed-on: https://code.wireshark.org/review/12287
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Picking off "easy" dissectors that only have one or two exit points at most.
Change-Id: Ie514f126352e7598acc4f7c38db9c61d105d5e48
Reviewed-on: https://code.wireshark.org/review/11850
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The preferences are still supported for backwards compatibility, but the heuristic_protos file has final say on the "preference" to enable/disable a heuristic dissector.
Also add parameter to heur_dissector_add() for the "default" enable/disable of a heuristic dissector. With this parameter, a few more (presumably weak) heuristic dissectors have been "registered" but of course default to being disabled.
Change-Id: I51bebb2146ef3fbb8418d4f5c7f2cb2b58003a22
Reviewed-on: https://code.wireshark.org/review/9610
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This allows better presentation of heuristic dissectors to the end user.
Change-Id: I2ff3985ab914e83c2989880cc0c7b9904045b3f6
Reviewed-on: https://code.wireshark.org/review/9602
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Specifically:
- Set packet.h to be the first wireshark #include after
config.h and "system" #includes.
packet.h added as an #include in some cases when missing.
- Remove some #includes included (directly/indirectly) in
packet.h. E.g., glib.h.
(Done only for those files including packet.h).
- As needed, move "system" #includes to be after config.h and
before wireshark #includes.
- Rework various #include file specifications for consistency.
- Misc.
Change-Id: Ifaa1a14b50b69fbad38ea4838a49dfe595c54c95
Reviewed-on: https://code.wireshark.org/review/5923
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Bill Meier <wmeier@newsguy.com>
- Improved handling of status bits
- Using bitfields where applicable
- Unified capitalization of hex values
- Using TFS instead of bits for status flags
- Added universe ID calculation from Address/Net/Port
- Added RDM PID decoding (values in packet-rdm.c)
- Added Poll/PollReply/Toc/Rdm support for Artnet3 (15bit universe)
- Updated manufacturer list from ESTA website
- Updated OEM codes from Art-Net SDK
Change-Id: I33edbfa754cb37391614f7cf4d6d4a9b11bcd52d
Reviewed-on: https://code.wireshark.org/review/5755
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
- The heuristic chek was missing "e" out of "Art-Net\0"
- tvb_length() - tvb_captured_length()
Change-Id: Iad9900f3a22e2fdbd0d6056efc1af90511cc458a
Reviewed-on: https://code.wireshark.org/review/5257
Reviewed-by: Anders Broman <a.broman58@gmail.com>
For:
- FT_BYTES: Always use just ENC_NA
- integral/floating (other than FT_[U]INT8): Do ENC_NA --> ENC_BIG_ENDIAN
Also:
- FT_UINT... --> FT_UINT8 in a few cases (to match proto_tree_add_item...)
- Change one case of incorrect '||' to '|'
Change-Id: I427e0e61618ff8faf55691c8a695930f67d455b0
Reviewed-on: https://code.wireshark.org/review/4184
Reviewed-by: Bill Meier <wmeier@newsguy.com>
Change-Id: Ib6024307e85d6c23decf40e9759f549c19ffe136
Reviewed-on: https://code.wireshark.org/review/3318
Petri-Dish: Michael Mann <mmann78@netscape.net>
Petri-Dish: Evan Huus <eapache@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Hopefully that name makes it clear what the routiner's purpose is, and
will encourage people to use it rather than using dissector_add_uint()
with a bogus integer value.
Change-Id: Ic5be456d0ad40b176aab01712ab7b13aed5de2a8
Reviewed-on: https://code.wireshark.org/review/2483
Reviewed-by: Guy Harris <guy@alum.mit.edu>
tvb_new_subset -> tvb_new_subset_remaining it appears that's what the intention is.
Change-Id: I2334bbf3f10475b3c22391392fc8b6864454de2d
Reviewed-on: https://code.wireshark.org/review/1999
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
- revert incorrect replacement of FALSE by ENC_BIG_ENDIAN
done a while back (2 cases);
[The incorrect use of ENC_BIG_ENDIAN was benign since
ENC_BIG_ENDIAN is currently defined ad 0x0000000];
- use proto_tree_add_item() instead of proto_tree_add_uint() when appropriate;
- move proto_register...() to just before proto_reg_handoff..()
as per convention;
- proto_reg_handoff...() doesn't need 'if (!initialized)'
- remove unneeded #includes;
- remove some "boilerplate" comments;
- remove unneeded forward declaration;
- whitespace.
svn path=/trunk/; revision=45631
1. If there's no character encoding (ENC_ASCII, ...) specified
then use ENC_ASCII.
2. For all but FT_UINT_STRING, always use ENC_NA
(replacing any existing True/1/FALSE/0
/ENC_BIG_ENDIAN/ENC_LITTLE_ENDIAN).
svn path=/trunk/; revision=39426
Specifically: Replace FALSE|0 and TRUE|1 by ENC_BIG_ENDIAN|ENC_LITTLE_ENDIAN as
the encoding parameter for proto_tree_add_item() calls which directly reference
an item in hf[] which has a type of:
FT_UINT8
FT_UINT16
FT_UINT24
FT_UINT32
FT_UINT64
FT_INT8
FT_INT16
FT_INT24
FT_INT32
FT_INT64
FT_FLOAT
FT_DOUBLE
svn path=/trunk/; revision=39288
FT_NONE
FT_BYTES
FT_IPV6
FT_IPXNET
FT_OID
Note: Encoding field set to ENC_NA only if the field was previously TRUE|FALSE|ENC_LITTLE_ENDIAN|ENC_BIG_ENDIAN
svn path=/trunk/; revision=39260