add the possibility, that a dissector writer can provide (usually non-trivial) display filters specific for the protocol in question (with an example in packet-dcerpc-pn-io.c), that will appear in the GUI
svn path=/trunk/; revision=22530
this in the GUI rather than calling pcap_stats() directly. This gets rid
of the last pcap_open_live() call in the GUI code. Update
README.packaging.
svn path=/trunk/; revision=22443
I did load an k12 file (.rf5), and want to save the selected frames in a new file.
I got the error "Wireshark can't save this capture in that format"
I think this is due to this correction: http://anonsvn.wireshark.org/viewvc/viewvc.cgi?view=rev&revision=22214
I have got a patch to force the type of file to libpcap, only if no other format is available. It should solve both problems.
svn path=/trunk/; revision=22403
that "-D" and "-L" should produce machine-readable output. Use this to
move an indirect get_pcap_linktype() call from the GUI to dumpcap.
svn path=/trunk/; revision=22367
"Automatic scrolling in live capture" are both enabled, make the scroll
bar behavior more natural. If the packet list is scrolled to the
bottom, scroll automatically. If the user scrolls back, keep the packet
list scrolled at that point instead of jumping back to the end.
svn path=/trunk/; revision=22277
Wireshark doesn't support writing to. The default in the drop-down menu
was libpcap, but since gtk_option_menu_set_history() doesn't send the
activate signal we set up earlier, you would have to manually click on the
drop-down and reselect libpcap for it to work. Now it works as expected.
svn path=/trunk/; revision=22214
the "OK," "Apply," or "Cancel" buttons are pressed. Remove some duplicate
code. Add a comment about "Cancel" not working as expected.
svn path=/trunk/; revision=22211
This new code adds a save button to the Statistics IO Graphs window and
is also reusable by any other code that uses GDK Pixmaps to draw graphs.
The Gdk-pixbuf library included in GTK is used for this save function.
svn path=/trunk/; revision=22166
filter dialog's add expression dialog when going to it through file->open
or file->merge (because dialogs in between are set to modal).
svn path=/trunk/; revision=22115
Add a capture_interface_list(), which works similar to
get_interface_list() except that it forks dumpcap instead of calling
the pcap routines directly. Use it in the GUI.
Add a "-I" flag to dumpcap, which prints out verbose interface
information.
Tested under Windows and Linux.
svn path=/trunk/; revision=22071
These changes allow the packet list clist to be destroyed and recreated
with the new column titles/values/order that the user changed in the
preferences without restarting Wireshark.
svn path=/trunk/; revision=22038
find attached several trivial diffs for viewing RTP SSRC values in Hex
rather than Dec at various places in the UI.
Also includes change from BASE_DEC to BASE_HEX_DEC for corresponding RTP
and RTCP dissector header fields.
svn path=/trunk/; revision=22017
created it is closed.
The fix is to close the graph analysis window when the flow graph setup
window is closed since closing the flow graph window first destroys all
of the data structures.
svn path=/trunk/; revision=21994
routines and routines using those routines. GLib might use different
modifiers for 64-bit quantities than the platform's C library does.
svn path=/trunk/; revision=21990
In all the places where a cast to "long long" or "unsigned long long"
was done, use G_GINT64_MODIFIER and get rid of the cast, as
1) there's no guarantee that "%ll" works
and
2) there's no guarantee that "long long" works
(the latter definitely does *NOT* work with MSVC++; the former doesn't
work with regular printf in MSVC++, but it might work with the GLib
printf-based functions).
svn path=/trunk/; revision=21978
Fix compilation failures when building wireshark-0.99.6-SVN-21916 on an
x86_64-unknown-linux-gnu target with gcc version 4.1.2 20070403 (Red Hat
4.1.2-8).
The failures fall into two categories:
(1) Casts between pointers and 32-bit integers without an intermediary cast
via 'long' or 'unsigned long'. This results in a compiler warning complaining
about casts between a pointer and an integer of a different size.
(2) Passing values to "%lld" or similar printf-style format options that the
compiler thinks are a different size. Such values need to be cast to 'long
long' or 'unsigned long long'.
svn path=/trunk/; revision=21975
epan/filesystem.c
have get_plugin_dir() calling init_plugin_dir() if necessary
epan/epan.c and epan/report_err.c
move the report_failure family into the new report_err.c file, have epan_init() calling the initializer
epan/plugins.h and epan/proto.c
do not have init_plugins() calling the proto_reg functions instead do it in init_proto()
gtk/main.c and tshark.c
init_plugin_dir() has become suprefluous
capinfos.c and editcap.c
load the wiretap plugins
Makefiles
do what's needed to build withe the above changes.
svn path=/trunk/; revision=21935
- packet-user_encap.c: use the new UAT_PROTO_DEF
- gtk/uat_gui.c: change the order of "containment" of the widgets to have the clist fields sized to the scrolledwindow instead of the whole window
svn path=/trunk/; revision=21934
state to "no packets", "file open", or "live capture in progress".
Instead, to update the main window title when the user-specified prefix
for the title changes:
save the un-decorated title as a data value attached to the main
window in set_main_window_name();
have a new routine to update the title, which fetches the
un-decorated title, decorates it, and sets the title to the
decorated value.
This fixes bug 1608.
svn path=/trunk/; revision=21876
WIRESHARK_RUN_FROM_BUILD_DIRECTORY is set and, if so and we weren't run
with special privileges, set the running_in_build_directory_flag. Have
it do the same if it finds ".libs" in the pathname of the program and we
weren't run with special privileges, as that means it was probably run
from the libtool wrapper script and presumably thus isn't an installed
binary.
This means that get_credential_info() has to be called before
init_progfile_dir().
Clean up some indentation.
svn path=/trunk/; revision=21866
early on, and use the converted versions.
#if 0 out the error dialog for CANT_GET_AIRPCAP_INTERFACE_LIST, rather
than commenting it out - it's a bit easier to un-out the code, and you
don't have to worry about whether there's a comment in the stuff being
xxx-outed.
svn path=/trunk/; revision=21838
- Update the wireless/AirPcap GUI code to support 802.11n as well as
some related upcoming code changes.
- Remove airpcap.h from the repository, since it exists in the AirPcap
devpack (and will be superseded Real Soon Now).
- Show the individual channel flag bits in radiotap.
Fix the 802.11n MCS set display.
This is a partial checkin, so hopefully nothing is broken.
svn path=/trunk/; revision=21831
wrong timestamp. Place a cap on the amount of silence that we do
insert. This should fix bug 1580.
Update the release notes.
svn path=/trunk/; revision=21818
The splash screen shows a progress bar and a percentage complete - like the progress dialog.
As dissectors are initialised and handed off the name is shown. However, the names of plugin dissectors are not shown.
The update to the make-dissector-reg shell script has been tested, though I think generally the python version is used.
svn path=/trunk/; revision=21716
probably fail (as you're probably out of disk space or over quota), and,
even if they don't, the file's going to be corrupt in any case.
(Hopefully that's sufficient to avoid warnings that we're ignoring the
result of fwrite().)
For fread(), check for errors or short reads, at least in all cases
where we have a provision for failing if the read fails.
svn path=/trunk/; revision=21649
--enable-extra-gcc-checks set.
If we turn on -pedantic, try turning on -Wno-long-long as well, so that
it's not *so* pedantic that it rejects the 64-bit integral data types
that we explicitly require.
Constify a bunch of stuff, and make some other changes, to get rid of
warnings.
Clean up some indentation.
svn path=/trunk/; revision=21526
`selection->type != GTK_SELECTION_MULTIPLE' failed" error when
opening the User Specified Decodes with multiple decodes setup.
The problem is caused by the selection mode for the list being
set to multiple. I changed it to none so that the user doesn't
get the false impression that you can select only certain items
and clear them (the clear button clears them all).
svn path=/trunk/; revision=21287
TCP/SSL Stream dialog find buttons because one of the functions used
only works with GTK 2.4+. Reported by Chris Maynard on -dev list.
svn path=/trunk/; revision=21285
Next try is to use the WINVER #define. AFAIK, this depends on the Platform SDK version used, which is actually our problem here. So this fix *might* work ...
svn path=/trunk/; revision=21168
sockaddr_storage doesn't depend on the MSVC version used, but the version of the Winsock API, which might be updated by the Platform SDK even on MSVC 6 - so depending on the _MSC_VER is not the way to go
svn path=/trunk/; revision=21162
(Fixing warnings)
stripped away some unused variables/parameters
+ in prefs.c
suggestion of parentheses makes gcc happy
svn path=/trunk/; revision=21156
Fix for bug #491: Unexpected frame.time_delta behavior
This patch ... fixes bug 491. It does this by changing the
behaviour of the frame.time_delta field so it reflects the delta
time between captured packets (tshark already did this). To keep
the delta time between displayed packets, the field
frame.time_delta_displayed is created.
svn path=/trunk/; revision=21154
I did however see some small errors in the
documentation that I did not notice when I sent in the patch. This
patch corrects them and adds an accelerated key:
- table 6.1 remove "Analyze" from "Identical..." column for "Copy as Filter"
- table 6.2 add "Edit" from "Identical..." column for "Copy as Filter"
- Added accelerator key for "Copy as Filter". I chose "Shift+Ctrl+C", so
that "Ctrl+C" is still available for "standard" copy
Image figure 3.4 should be renewed, reflecting the change in the menu
structure.
svn path=/trunk/; revision=21140
* add SUA to the "VoIP Calls" tap.
* propagate changes to packet-sccp.h to other dissectors
From Neil Piercy:
* add SLR, DLR and CAUSE to COL_INFO
svn path=/trunk/; revision=21126
split the "sensitivity control" into "Copy" and "Copy/As Filter", otherwise it's not possible to copy a field that is not filterable (e.g. text only descriptions)
svn path=/trunk/; revision=21097
A new function is introduced, prefs_register_protocol_subtree(), that allows the subtree the protocol should appear under to be specified. The subtree is specified as a string, with a '/' delimiting each subtree element. For example,
prefs_register_protocol(proto_dap, prefs_register_dap);
becomes
prefs_register_protocol_subtree("OSI/X.500", proto_dap, prefs_register_dap);
The function will create all the intermediate subtree nodes that are required, if they don't already exist.
This allows the grouping of procotols which should make the list of protocols more manageable as even more are added. The current aim is to group by protocol family e.g.
+ OSI
+ X.400
X.411
X.420
+ X.500
DISP
DAP
DOP
DSP
+ X.509
X509AF
X509CE
...
but others grouping could be envisioned (e.g. by first letter).
As the intermediate nodes may already have preferences (e.g. OSI), then modules are now allowed to have submodules. Previously each node was either a subtree or held preferences. This is consistent with the "User Interface" node.
The subtree structure has no effect on how the preferences are saved to file, and the "Protocol Preferences..." menu option will bring up the preferences expanded to the correct node.
In addition, a new "blank page" has been introduced for intermediate nodes that have no preferences (and is also used when the "Protocols" node itself is chosen). This prevents confusion when the user moves from a node with preferences to a node without preferences, but the page old page is still shown.
There is also a change to prevent '#' characters in a value being treated as a comment when parsing the preferences file. (There is nothing that adds comments when writing the preferences file.)
svn path=/trunk/; revision=21066
- instead of wrongly using the h248 call counter use tapinfo's counter
graph_analysis.c:
- beautify the code (I was trying to the bug that got fixed by bzeroing m3ua tap data however this looks better!).
svn path=/trunk/; revision=21063
http://bugs.wireshark.org/bugzilla/show_bug.cgi?id=1336
Since mtp3_stat_draw() returns immediately if passed a NULL tapdata pointer,
call it with a pointer to the stat data (instead of NULL) in
mtp3_stat_gtk_cb().
svn path=/trunk/; revision=21042
screen
Changed IP address label to fit into an event box which is in the ip
address hbox. This allows the label to expand to fit the capture dialog
window, but no further. Expanding the capture dialog window will show
more IP addresses. Left align the label. Add ... in the middle of a
long list of IP addresses to show the first few and the last few with
the gtk_label_set_ellipsize() function in GTK 2.6 and up.
svn path=/trunk/; revision=21038
and there are no formats in which the file can be saved by some means
other than copying the raw data; "Save As" isn't a very useful function
in that case, and that prevents us from having an empty list of formats
in which the file can be saved.
svn path=/trunk/; revision=21032
add new WS command line option -P to be able to change some of the path settings
this is experimental, please report bugs
svn path=/trunk/; revision=21022
- Split the HTTP tap into two taps: one for the HTTP statistics
and the other for the export object function. This allows the
HTTP statistics to work again (they seem to have been
partially broken since SVN rev 18901).
- Pass the conversation data (conv_data) between functions now
instead of using the global variable stat_info (now only used
for the HTTP stats)
- Pass only pointers from the HTTP dissector to the Export Object
tap, where we'll then copy the values and insert into the slist.
- Make sure we free all memory allocated by this feature when
we're done with it.
- Various other minor improvements
svn path=/trunk/; revision=21021
epan/dissectors/
packet-bctp.c:
no newline at end of file
packet-epl.c:
C++ style comments are not allowed in ISO C90
packet-sccp.c:
missing initializer
packet-sccp.h:
comma at end of enumerator list
packet-sctp.c:
suggest parentheses around assignment used as truth value
packet-vnc.c:
control reaches end of non-void function
pointer targets in passing argument 1 of 'g_strtod' differ in
signedness
pointer targets in passing argument 3 of 'vnc_client_to_server'
differ in signedness
gtk/
main.c:
C++ style comments are not allowed in ISO C90
u3.h:
function declaration isn't a prototype
Other (trivial) stuff
packet-sccp.h:
Add svn properties
svn path=/trunk/; revision=21011
I have changed the patch according to your suggestions and also changed
the doc[book] files accordingly. I tested the patch and it does seem to
work fine on my test-system.
ULFL: In addition, I've added the en-/disabling to the other (already existing) Copy menu items - some just did nothing, some crashed if nothing was selected.
I've also sligthly changed the menu seperators and made both context menus look a bit more identical.
svn path=/trunk/; revision=21005
- Note in the user's guide that export object is not available
in GTK1 builds of Wireshark.
- Make scanning through the slists more efficient
- Use new tap.c function called have_tap_listener() to only save
object payload data when the export object listener is actively
listening for it.
- Save objects in the HTTP dissector with g_malloc() instead of
se_malloc() and free it when we're done with it - when the
export object window is closed (Fixes bug #1412)
- Various minor improvements
svn path=/trunk/; revision=20980
- Add to User's Guide
- Add a help button
- Move a lot of code into the shared export_object.c file and out of
dissector specific file export_object_http.c. This will make adding
additional protocols much easier.
- Change comment in packet-http.c to reflect new name (Export Object)
- Various other minor improvements
svn path=/trunk/; revision=20961
This patch add a test on the GTK version to avoid a warning with the "gtk-label-select-on-focus" configuration parameter, introduced in GTK-2.9.0.
svn path=/trunk/; revision=20936
feature lists all of the content found in an HTTP stream (images, http, etc.)
and displays it in a list that allows the user to save each one as a file that
is already reassembled by the dissectors.
svn path=/trunk/; revision=20867
I have provided a patch for a crash that occurs in uat_gui.c if from the
"Edit preferences..." button when you choose Protocols -> DLT_USER ->
the "Edit..." button -> the "New" button -> the "Cancel" button.
The crash happens because dd gets freed prior to traversing its internal
structure, hence I moved the call to g_free for dd beneath the traversal
of the dd internals.
svn path=/trunk/; revision=20813
Create two new files (ws_strsplit.[ch]) that use GTK2 code to override
the buggy g_strsplit() function when compiling for GTK1. Include this
work-around function (ws_strsplit) in libwireshark.def. Add notes on usage
to README.developer. Include epan/ws_strsplit.h in all files that use
g_strsplit().
svn path=/trunk/; revision=20804
(this should be combined into a generic function as this CSV encapsulation functionality is implemented several times)
svn path=/trunk/; revision=20791
Have these buttons reloading the capture file if needed.
Some rearrangement of the window (the editor is still missing "ornaments" and tooltips)
svn path=/trunk/; revision=20788
* Remove macros_dlg, the DFMacros UAT goes in the menu with all the rest
* in packet-user_encap.c WTAP_ENCAP=XXX has become useless information for the user leave just the DLT#
svn path=/trunk/; revision=20753
http://bugs.wireshark.org/bugzilla/show_bug.cgi?id=1289
Rename 'svnversion' to 'wireshark_svnversion' to resolve a symbol conflict with
GTK 2.10.6 (hmm, shouldn't GTK not be exporting that symbol or at least naming
it so as to prevent such collisions? Well, so should we, so...)
From Andreas Fink: change #ifdef for size_t in airdcap_interop.h to fix
compile on MacOS X.
svn path=/trunk/; revision=20726
* fields of an uat table now are passed using an array of uat_filed_t
* field callbacks take two more userdata arguments
* add some macros to define uat field callbacks.
* uats can be registered as preferences for a specific protocol
- the preference widget is a button that opens the uat's window
* dfilter-macro => reflect changes to API
svn path=/trunk/; revision=20695