Set ENABLE_CHECK_FILTER to 1 for get list of display filter with conflict...
Ping-Bug:2402
Change-Id: I8d56b1573120d1a29d437aae1088be242e15e9a3
Reviewed-on: https://code.wireshark.org/review/13644
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Dump the output of `git shortlog` directly to AUTHORS.git instead of
piping it through `cut`. Depending on our toolchain, cmake COMMANDs might
not support pipes. This appears to be the case for MSBuild. Removing the
`cut` command has the added benefit of reducing our dependency on Cygwin.
Pass HEAD to `git shortlog`, otherwise it doesn't return anything when
run under MSBuild.
Change-Id: I23e9436c007d76a700bbbc45c2772c8aba6d5749
Reviewed-on: https://code.wireshark.org/review/14349
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This new function abstracts the creation of a list of the local
interfaces that will be used by future extcaps to generate specific
filters. Sshdump now uses it to create a pcap filter.
Change-Id: I5b75a266f81104b3c9bcb3e51de246b7cc8785ce
Reviewed-on: https://code.wireshark.org/review/14092
Reviewed-by: João Valverde <j@v6e.pt>
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
new AUTHORS file can be created with "gen-authors" build parameter
The "original" AUTHORS file has been fixed up to be kind to parsers (so no one gets excluded) and renamed to AUTHORS.src. This preserves the features authors worked on. For authors that didn't list features, they may be converted to just getting information from git.
Change-Id: I9a4c4091e229f7f5e1c46d864527a98c1278e451
Reviewed-on: https://code.wireshark.org/review/14231
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Smaller epan/CMakeLists.txt is easier to work with and this structure
is well suited to CMake. It should make it easier to manage and configure
each epan module differently if necessary.
Change-Id: Ia649db3b7dcd405aa43dbdba3288699d5e375229
Reviewed-on: https://code.wireshark.org/review/14068
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: João Valverde <j@v6e.pt>
Also add the extcap-version parameter to enable parsing of
version and helppage separately
Change-Id: I35ba5aa992940ffbb0cd9ebea8b7c3a1e8629d74
Reviewed-on: https://code.wireshark.org/review/14094
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
If you include something from the wiretap directory, always precede it
with wiretap/.
Fix some includes of files in the top-level directory to use a path
relative to the current directory, not relative to the wiretap
directory.
This makes it a bit clearer what's being included.
Change-Id: Ib99655a13c6006cf6c3112e9d4db6f47df9aff54
Reviewed-on: https://code.wireshark.org/review/13990
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That lets the version of Wireshark built with autotools find the extcap
programs.
Don't install the extcap programs under ${datadir} - that puts it under
a share directory, and share directories are for platform-independent
files, which executable images aren't (they're instruction-set
dependent, hence platform-dependent).
Change-Id: I992eeb984bdbe6b3476777f7114628c83df6080f
Reviewed-on: https://code.wireshark.org/review/13943
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Fixes dpkg warnings:
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/wireshark-qt/usr/bin/wireshark was not linked against libsbc.so.1 (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/wireshark-gtk/usr/bin/wireshark-gtk was not linked against libsbc.so.1 (it uses none of the library's symbols)
dpkg-shlibdeps: warning: symbol sbc_decode used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol sbc_init used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol sin used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol floorf used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol floor used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol sbc_finish used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
Change-Id: I71911513c348edd336cdc82ea358b6a05760b4b9
Reviewed-on: https://code.wireshark.org/review/13784
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
In CMake and Autotools, warn the user when neither c-ares nor ADNS is
present. Note that we might want to make asynchronous DNS a requirement.
Change-Id: Ia9cce56cc2286cdc72303fc1410f899f9c320d84
Reviewed-on: https://code.wireshark.org/review/13080
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Move ui/filters.[ch] to filter_files.[ch] because dumpcap is using functionality.
Bug: 8091
Change-Id: I195c82fc023f97d6f331b8718c45a2d83d30faea
Reviewed-on: https://code.wireshark.org/review/5925
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This change allows make-version.pl to run correctly on Windows
without having the git binary dir in PATH. This prevents problems when
installing "Git for Windows" with default settings (git only available
via the bundled shell (bash).
Details:
* Add Git to the list of packages to be looked up by CMake.
* If Git is found by CMake, pass the full path to make-version.pl
* make-version.pl: Test whether git is available, and display a warning if git is missing.
On Unix-type systems this should have no impact.
Tested on Windows Server 2012 R2 and Ubuntu 15.04.
Change-Id: I7f7be2035c262658801586cb24c82b912848e31d
Reviewed-on: https://code.wireshark.org/review/13111
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Have CHECK_C_LINKER_FLAG pass /WX to the linker if we're using MSVC, to
force the link to fail if the linker doesn't recognize the flag.
Add flags to WIRESHARK_LD_FLAGS even with MSVC; let CHECK_C_LINKER_FLAG
figure out whether the flag should be used.
While we're at it, fix CHECK_C_LINKER_FLAG to save and restore
CMAKE_REQUIRED_LIBRARIES.
Change-Id: I7f73b4cc3a28eb14e46c2e1e9ad69f5303754f01
Reviewed-on: https://code.wireshark.org/review/13558
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
So far the plugindir variable in the pkg-config file is set like
this:
set( plugindir "\${libdir}/${PLUGIN_INSTALL_DIR}" )
where libdir is set to:
set( libdir "\${exec_prefix}/${CMAKE_INSTALL_LIBDIR}" )
However, PLUGIN_INSTALL_DIR already contains
CMAKE_INSTALL_LIBDIR:
set(PLUGIN_INSTALL_DIR "${CMAKE_INSTALL_LIBDIR}/\
${CPACK_PACKAGE_NAME}/plugins/${CPACK_PACKAGE_VERSION}")
Therefore, if the pkg-config file is generated by cmake, the
resulting plugindir points to:
plugindir=${libdir}/lib/wireshark/plugins/2.1.0
libdir=${exec_prefix}/lib
This is obviously wrong as after variable substitution the
resulting path is /usr/lib/lib/wireshark/plugins/...
Change-Id: I448991284d8948434311b1c0828828fd93d0baf8
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-on: https://code.wireshark.org/review/13258
Tested-by: João Valverde <j@v6e.pt>
Reviewed-by: João Valverde <j@v6e.pt>
Fix
CMake Warning (dev) in CMakeLists.txt:
A logical block opening on the line
C:/Development/wireshark-w64/CMakeLists.txt:1649 (if)
closes on the line
C:/Development/wireshark-w64/CMakeLists.txt:1668 (endif)
with mis-matching arguments.
This warning is for project developers. Use -Wno-dev to suppress it.
Change-Id: I6b6060e4d88b385deb81111234e3229d104772f1
Reviewed-on: https://code.wireshark.org/review/13407
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Avoid build fail if found Lua but it is disabled.
Change-Id: If1cf0d650454d2844a1430135de1385c984e5ba4
Reviewed-on: https://code.wireshark.org/review/13394
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Firstly, when building with autogen.sh and configure script, the
wireshark.pc is not generated at all. Then, due to not matching
names some variables are not being replaced as they should be.
Bug: 11069
Change-Id: Iefa7a9b536f3fee7f9ad78803aaacc5bb64a9c8d
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-on: https://code.wireshark.org/review/13005
Reviewed-by: João Valverde <j@v6e.pt>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The glob pattern should not catch the generated faq.txt file. Fix this
by explicitly listing all source .txt files.
Bug: 11896
Change-Id: I3904a0e094b5dba3808dacaaabd4db298a8f14cb
Reviewed-on: https://code.wireshark.org/review/12930
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
This also moved color.h into color_filters.h
Change-Id: Ic19e27aa1b3ec67e764aa7ee8bbef7b1187bb12e
Reviewed-on: https://code.wireshark.org/review/12831
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This new extcap is for testing and educational purpose.
It relies on rankpkt-core functions to generate random packets.
Change-Id: If6890f0673545682995a2079458108edc0913b30
Reviewed-on: https://code.wireshark.org/review/11764
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The "-Wwrite-strings" flag produces nuisance warnings. These warnings are
not useful, they're impossible to fix in a sane way and therefore are being
handled with casts of static strings to (char *).
This just moves the warning to [-Wcast-qual] and a compiler pragma is
in turn required (and used) to squelch that warning.
Remove the Wwrite-strings warning. Let that responsibility fall on the
programmer (as is done by casting).
Change-Id: I5a44dfd9decd6d80797a521a3373593074962fb5
Reviewed-on: https://code.wireshark.org/review/12162
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This reverts commit b56f53884b.
Sadly, we *do* get warnings at this point with older versions of Flex,
such as the one on the 32-bit OS X buildbot.
Change-Id: I9aec1a16e9f2e1bbcfaac3dffdabdd89af5815e3
Reviewed-on: https://code.wireshark.org/review/12443
Reviewed-by: Guy Harris <guy@alum.mit.edu>
We shouldn't be getting warnings at this point.
Change-Id: I363a48546cb8d916425f42962ae1697d52ed9a29
Reviewed-on: https://code.wireshark.org/review/12436
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Move the code that finds the Visual C++ redistributable DLLs to its
own module. Run it before we create our NSIS and PortableApps targets.
Add a PortableApps target that copies the redistributable
This reverts commit 403fa9fbe0cdba3f443ec4674cda40092525ffe4.
Bug: 11800
Change-Id: I081d8fd3f5f37dd590659ca8f2bd309642a9a9df
Reviewed-on: https://code.wireshark.org/review/12431
Reviewed-by: Gerald Combs <gerald@wireshark.org>
(cherry picked from commit 5b580834aeeee8477039bc099c49c21aeeb3b71f)
Reviewed-on: https://code.wireshark.org/review/12432
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
This fix was accidentally reverted in d6da952. Tested with CMake
2.8.12.2 and 3.3.2.
Change-Id: I05312eb9ec18be88be6155edb1ced67ea2ee2bba
Reviewed-on: https://code.wireshark.org/review/12301
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
It is misleading to print RelWithDebInfo flags if I am using Debug.
Change-Id: I575d5c950cbe9d59852799c28fd88426f20cdaab
Reviewed-on: https://code.wireshark.org/review/12133
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Ensure that files from INSTALL_FILES depend on html_docs, not the parent
target copy_data_files (that would not help at all). Ensure that lua
scripts are generated before copying them (another moved dependency).
Explicitly track the help files that have to be textified for Windows
(this finalizes the addition of proper dependencies to copy_data_files
targets).
Since there is no compelling reason for the extra
copy_data_files_depends target now, remove it and move copy_data_files a
bit further in the file such that the dependencies can be set.
While at it, remove the unnecessary make_directory, the copy_data_files
target will create it automatically when copying a file into it.
Should fix the problem reported at https://code.wireshark.org/review/12028
Change-Id: I81e56c93ac0fc85e7385605b9c780a80b3d43c85
Reviewed-on: https://code.wireshark.org/review/12130
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Original problem: run/radius/ (and other files) would continuously be
copied over because the "copy_directory" command is always invoked,
resulting in a newer timestamp (observable via rsync output).
Fix 1: convert from "copy_directory" to copying individual files
(matched via a glob pattern).
Fix 2: add DEPENDS information to the commands, ensuring that the
copy commands are only invoked when the file is actually newer.
(copy_if_different does not respect timestamp, so use plain copy.)
Other visible changes:
- radius/Custom.make (automake thingey) is not copied anymore because
an explicit list is used with glob patterns.
- Removed comment about "default.tt" (gone since
v1.99.0-rc1-1684-g07b003a, Makefile.nmake is still untouched though).
Due to fix 1, the number of processes increase by about 300. Due to fix
2 however, less processes are executed for repetitive runs. This is
visible in the following build time comparison:
patch/generator cmake build1 build2 clean
before/make 24.86 152.73 3.46 1.04
after/make 24.78 153.08 3.40 1.03
before/ninja 22.99 141.68 0.64 0.24
after/ninja 22.89 141.66 0.10 0.25
cmake is "cmake -DCMAKE_BUILD_TYPE=None -GNinja" (-G"Unix Makefiles");
build1 is invocation of "make -j10"/"ninja" on v2.1.0rc0-668-g94b9907;
build2 is the second invocation with this patch;
clean is "make clean" or "ninja clean".
Numbers are in seconds over 3 runs. This patch has no significant
performance impact for the first build, but the second run has improved
because the more efficient Ninja generator executes less processes.
Change-Id: I7b62556393520044aaaad17dafb82ac137ae73bb
Reviewed-on: https://code.wireshark.org/review/12028
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I14089fbdafa00280ff7b3148c2e0a880b925958e
Reviewed-on: https://code.wireshark.org/review/11872
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The path may contain a space (it does on my Windows 7 VM), so quote it
in the PowerShell command.
Change-Id: Ib130991b8c29cb327832f2fe51cb37828526448b
Reviewed-on: https://code.wireshark.org/review/12041
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The hardening check runs on all binaries and quite a few third party binaries
are not hardened, thus leading to a warning on the buildslave.
The change reduces the noise by not counting the binaries that are known to be
"soft". They are still printed in the output though, for reference.
Also fixed the search directory passed to the script.
Change-Id: I1619066c687c9ba934ab38fccbbf2011108328e4
Reviewed-on: https://code.wireshark.org/review/12016
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Graham Bloice <graham.bloice@trihedral.com>
João Valverde