a list of disabled protocols, and to save that list from the Edit >
Protocols dialog box.
Add checks for read errors in "read_prefs()".
Clean up white space.
svn path=/trunk/; revision=8144
add support for a system-wide color filter file;
fix a bug where "read_filters()" didn't close the file handle.
Use the "get_datafile_path()" routine he added to construct the pathname
of the Diameter directory, the global preferences file, and the manuf
file.
svn path=/trunk/; revision=7677
calling "tcp_dissect_pdus()", so that if we don't have the final segment
of a multi-segment packet, we don't change the columns or put in an
empty protocol tree item for NDPS.
Rename "ndps.desegment_ndps" to "ndps.desegment_tcp" - the "ndps." is
sufficient to indicate that it's for desegmenting NDPS, but we now have
a flag for desegmenting NDPS-over-SPX, so we should indicate that the
other flag is for desegmenting NDPS-over-TCP.
svn path=/trunk/; revision=7425
that's the name of the module, as long as the prefix doesn't end with
"." or "_" (so you can register "tc.tcp.port" or "tc.tcp_port", but not
"tc.tc.port" or "tc.tc_port").
svn path=/trunk/; revision=7351
preference by comparing "module->name" against the module, not by
checking the first part of the preference name - the preference name
might not contain the correct module name, as we've mapped some modules.
svn path=/trunk/; revision=7350
NULL, convert it to a copy of a null string, otherwise replace it with a
copy of the string, so that we know that the variable for the preference
always points to a string that can be freed.
That also obviates the need to worry about a null-pointer value for a
preference variable when checking to see whether a preference has changed.
When checking for a string preference not being set, check for an empty
string, not a null pointer - the above code turns null pointers into
pointers to empty strings, *and* the GUI code does (and always did!) the
same.
svn path=/trunk/; revision=7342
belongs, as that's redundant.
Fix a bunch of cases where that was done, and map the old name to the
new name.
Instead of marking "mtp3.mtp3_standard" as obsolete, map it to
"mtp3.standard".
svn path=/trunk/; revision=7030
used to construct the "Edit->Preferences" dialog box; this includes the
ability to register a "subtree" for preferences. Instead of
special-casing protocol preferences, have a subtree "Protocols" for
protocol preferences.
svn path=/trunk/; revision=6808
alternating colors in all TreeView widgets (see
gtk_tree_view_set_rules_hint()).
- remove unused preferences in the gtk2 port (tree_expander_style and
tree_line_style).
svn path=/trunk/; revision=6296
equivalents for the toplevel directory. The removal of winsock2.h will
hopefully not cause any problems under MSVC++, as those files using
struct timeval still include wtap.h, which still includes winsock2.h.
svn path=/trunk/; revision=5932
Fixed TFT decoding and processing PPP payload inside of GTP
protocol conf options
That change also put all GTP preferences under a "gtp" heading; put in
another hack so that your old "gtpv0" and "gtpv1" settings are recognized.
svn path=/trunk/; revision=5588
if a dissector had preferences at one point but no longer does, it can
register that fact, so that the old preferences in the preference file
are silently ignored.
Use that mechanism in the NCP dissector.
svn path=/trunk/; revision=5446
"epan/..." pathnames, so as to avoid collisions with header files in any
of the directories in which we look (e.g., "proto.h", as some other
package has its own "proto.h" file which it installs in the top-level
include directory).
Don't add "-I" flags to search "epan", as that's no longer necessary
(and we want includes of "epan" headers to fail if the "epan/" is left
out, so that we don't re-introduce includes lacking "epan/").
svn path=/trunk/; revision=4586
the beginning, and to use underscores rather than periods where the
preference's name really isn't part of a hierarchical namespace.
Use "%u" rather than "%d" to print unsigned quantities.
svn path=/trunk/; revision=4543
Separate the preferences value for those flags and the name resolution
code's value into separate variables; this means that the resolution
code no longer depends on the preferences code, and may let us
eventually have the current setting and the preference setting differ
(so that a user can temporarily override the preference setting without
causing subsequent saves of the preferences to save the temporary
value).
Add routines to create various types of widgets for preferences, and to
fetch the values for "enumerated" preferences, and use them both in the
code to handle hardwired preference pages and table-driven preference
pages.
svn path=/trunk/; revision=4536
directly edit the capture preferences, rather than only being able to
set them implicitly from the values for the most recent capture.
Add a preferences item for the interface on which to capture.
Get rid of some unused variables.
svn path=/trunk/; revision=4510
the geometry is saved at exit. Should we save the main window pane
sizes as well?
Move the DEF_WIDTH and DEF_HEIGHT #defines from gtk/main.h to prefs.h.
Remove the reference to DEF_WIDTH from proto_hier_stats_dlg.c.
svn path=/trunk/; revision=4462
references an unknown module, check the "preference" part to see if
another "." is found; iterate until a known module is found, or until
nor more "."'s are found.
Needed for the new "x.25.non_q_bit_is_sna" preference.
svn path=/trunk/; revision=4225
obsolete; we silently ignore attempts to set those in a preferences
file, so that we don't spam the user with error messages caused by them
having saved preferences in an earlier release that contained those
preferences.
Make the Diameter and iSCSI dissectors register obsolete preferences.
Crash if some code tries to register a preferences module with a name
that contains something other than lower-case ASCII letters, numbers, or
underscores, or that has already been registered, or if some code tries
to register a preference with a name that contains something other than
lower-case ASCII letters, numbers, underscores, or periods, or that has
already been registered, so that we don't put code like that in a
release and have to shovel code into "prefs.c" to fix it up later. (The
problem with multiple modules or preferences with the same name should
be obvious; the problem with names with blanks, or upper-case letters,
or punctuation, is that they're a pain to type on the command line.)
svn path=/trunk/; revision=4148
same name; if that happens, there's no way to tell to which of them a
line in a preferences file, or an option supplied with "-o", refers, so
it's clearly a bug in the code. This has happened in the past, and
fixing that required some preference renaming *and* code in the
preferences-file-reading code to try to preserve the user's settings and
not spew warnings when starting Ethereal or Tethereal; let's try to
catch it *before* the code gets into the code base.
svn path=/trunk/; revision=4143
and generates the path name; have it, if the file is to be opened for
reading on Win32, check whether it exists and, if not, check for it in
the old home directory-based configuration directory and, if so, return
that path instead, so that files saved with earlier versions of Ethereal
will be seen.
svn path=/trunk/; revision=4072
Use that routine rather than duplicating that code in the routines to
write out the preference file and filter files.
Use it in the code for the color filter dialog, so that the directory in
question is created if necessary.
As that routine returns an error indication, have the code that calls
that routine put up a message box if the attempt fails.
svn path=/trunk/; revision=4065
reside. Use it, rather than concatenating the user's home directory and
".ethereal" in a number of files.
Fix up some additional places to use G_DIR_SEPARATOR_S as the pathname
separator.
svn path=/trunk/; revision=4061
strings used to generate pathnames.
Move the definition of PF_DIR from <epan/epan.h> to <epan/filesystem.h>,
so that files requiring only the definition of PF_DIR don't have to
include <epan/epan.h>, and get rid of no-longer-necessary includes of
<epan/epan.h>.
Add a routine to get the directory for "system files" such as
"/etc/ethers" - it's "/etc" on UNIX, and the datafile directory on
Windows (as there's no "/etc" on Windows). Use that to construct the
pathname of the ethers and ipxnet files.
svn path=/trunk/; revision=4056
CVS versions would've had "quake3.udp.port" in the preferences file;
therefore, we can remove the code to map them to "quake3.udp.arena_port"
and "quake3.udp.master_port".
svn path=/trunk/; revision=4034
the master server port preference "quake3.udp.port"; rename them to
"quake3.udp.arena_port" and "quake3.udp.master_port".
svn path=/trunk/; revision=4023
directory in which global data files are stored. If an installed binary
is being run, that's the correct directory for them; if a build-tree
binary is being run, the "manuf" file will be there, and you can put
other data files there as well, if necessary.
Do the same with plugins, except that, if there's no
"plugins\\{version}" subdirectory of that directory, fall back on the
default installation directory, so you at least have a place where you
can put plugins for use by build-tree binaries. (Should we, instead,
have the Windows build procedure create a subdirectory of the "plugins"
source directory, with the plugin version number as its name, and copy
the plugins there, so you'd use the build-tree plugin binaries?)
Move "test_for_directory()" out of "util.c" and into
"epan/filesystem.c", with the other file system access portability
wrappers and convenience routines. Fix "util.h" not to declare it - or
other routines moved to "epan/filesystem.c" a while ago.
svn path=/trunk/; revision=3858
generate such a list from the list of column format information and hand
the resulting list to "put_string_list()" when writing out the preference.
svn path=/trunk/; revision=3779
the format of string lists in a preferences file; rename it to
"put_string_list()", make it take the list as an argument rather than
working only on "prefs.col_list", and put it in "prefs.c".
svn path=/trunk/; revision=3776
Guy Harris