new AUTHORS file can be created with "gen-authors" build parameter
The "original" AUTHORS file has been fixed up to be kind to parsers (so no one gets excluded) and renamed to AUTHORS.src. This preserves the features authors worked on. For authors that didn't list features, they may be converted to just getting information from git.
Change-Id: I9a4c4091e229f7f5e1c46d864527a98c1278e451
Reviewed-on: https://code.wireshark.org/review/14231
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
* tvb_*_length mentioned in README.dissector
* fixed typos in README.dissector
* using stats_tree_register_plugin in the stats_tree examples both in README.stats_tree and the dev guide
* removed the version information and the #endif from the stats tree section in README.dissector
Change-Id: I27df0b5dfd66a7c0ac5b0fe1bdc882b3e9ffda74
Reviewed-on: https://code.wireshark.org/review/12908
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Developed by Emerson Industrial Automation (Control Techniques Division)
eCMP is a protocol for setting up and controlling the devices in a factory
automation system. eCMP has about 30 commands; most are embedded into TCP/IP
messages, but cyclic data messages use the UDP protocol.
Bug: 10562
Change-Id: I9a421f39dfbdbc9e28d8f7cba72c22e270064641
Reviewed-on: https://code.wireshark.org/review/3157
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Relationships Between Sets of LSPs", draft-ietf-pce-association-group-00
Bug: 11782
Change-Id: I1f0886bc30a71af54b51dea771a927d1f5742ca9
Signed-off-by: Francesco Fondelli <francesco.fondelli@gmail.com>
Reviewed-on: https://code.wireshark.org/review/12179
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
(Source files all reference this file, so they don't need updating)
Change-Id: Ib78c081d00e093119eab7d4d97c74944b3a46cfd
Reviewed-on: https://code.wireshark.org/review/11507
Reviewed-by: Stephen Fisher <sfisher@panix.com>
The presentation in GUI should be improved to not depend on the
number of TAB's used in the source AUTHORS file.
Change-Id: I3db1f80112e01613c57be25ad866afbb717fc92f
Reviewed-on: https://code.wireshark.org/review/11345
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
TCPROS is a transport layer for ROS Messages and Services.
It uses standard TCP/IP sockets for transporting message data.
Inbound connections are received via a TCP Server Socket with a header containing message data type and routing information.
For more information, see: http://wiki.ros.org/ROS/TCPROS
Bug: 11404
Change-Id: If8810dbb2cb6d6522eb035fd0fa1cf49933bad3d
Reviewed-on: https://code.wireshark.org/review/9807
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Conveying path setup type in PCEP messages, draft-ietf-pce-lsp-setup-type-00
PCEP Extensions for Segment Routing, draft-ietf-pce-segment-routing-01
Bug: 11046
Change-Id: Ib2ea9a96079324377fa65ef8c3ab37a98f530793
Signed-off-by: Francesco Fondelli <francesco.fondelli@gmail.com>
Reviewed-on: https://code.wireshark.org/review/7618
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
... with some changes from Jeff Morriss:
- Change how SSTP is "registered": rather than trying something complicated,
just put the intelligence for recognizing SSTP into the HTTP dissector.
(This does mean the SSTP dissector needs to do its own desegmentation now
but it makes things much cleaner.)
- Use proto_tree_add_subtree_format() instead of proto_tree_add_text() +
proto_item_add_subtree().
- The messagetype is 16 bits, use tvb_get_guint16() instead of tvb_get_guint8()
(fixes COL_INFO display)
- A few other few misc. cleanups
(I didn't update NEWS because I can no longer build NEWS without adding UTF8
fancy quotes and so forth.)
Bug: 8239
Change-Id: I3631ae65f67bea69815ccf43472fdbcac3ca3499
Reviewed-on: https://code.wireshark.org/review/7227
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
* Move sdo dissection to separate function
Added dissect_sdo() function to handle the more complex SDO dissection.
* SDO command specifier decoding
Decoding of both client and server command specifier for SDO transfers
according to CiA 301 Chaper 7.2.4.3.
Note: Fully decoding block transfer frames is more complex and not supported
yet.
* basic SDO abort code decoding
SDO abort codes as specified in CiA 301 Chapter 7.2.4.3.17 (Table 22).
* Basic value ranges for object dict index parameter
Object dict ranges as specified in CiA 301 7.4.1 (Table 41)
* cs-based multiplexer and data decoding
A data width of 4 byte is valid only for expedited transfer and a
multiplex value is present only in initialisation messages.
This patch now handles also normal sdo segment data.
Reference: CiA 301, Chapter 7.2.4.3.3 and 7.2.4.3.6
Change-Id: I37005894082d62eed1ddd85e09e3676aa3af8222
Reviewed-on: https://code.wireshark.org/review/5504
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
RFC draft http://www.ietf.org/id/draft-fox-tcpm-shared-memory-rdma-05.txt
used as reference for packet dissection.
A small change was made to packet-infiniband, to add the Queue Number to the
info column. This allows for easy indentification of session traffic for a
particular QP.
Also: infiniband: tvb_length() --> tvb_captured_length()
Bug: 10715
Change-Id: I774ceffaa5c271cb6a28ab4ed21e53cd42f2547b
Reviewed-on: https://code.wireshark.org/review/5386
Petri-Dish: Bill Meier <wmeier@newsguy.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Bill Meier <wmeier@newsguy.com>
We should warn when decoding Geneve packets with an unknown
version number.
Change-Id: Id40b756c3bb0320b69fbd8ee98830a2b05834a48
Reviewed-on: https://code.wireshark.org/review/5420
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Provides dissection for the elasticsearch protocol. This includes full
dissection of the multicast discovery protocol, the HTTP query interface
and partial dissection of the binary protocol.
Change-Id: I738fb498976e44fa05168c2bc3a7e842a9e96df9
Reviewed-on: https://code.wireshark.org/review/4948
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Previoulsy added "adb_cs" is only for adb client <-> adb daemon communication
by loopback interface (by TCP). But there is also communication between
adb daemon and device (by TCP or USB). This transport protocol is different, but
now support is done.
ADB services are shared between ADB and ADB_CS so put them into "adb_service"
dissector. There is still some services to be added.
Change-Id: I754331d3dc6ccf3c17445f5563d01cf2fe1489c7
Reviewed-on: https://code.wireshark.org/review/4651
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
author to AUTHORS.
Also mention support of nanosecond timestamps in PCAP-NG files.
Change-Id: I31666de845240a311a8332cff42120d78d2d1474
Reviewed-on: https://code.wireshark.org/review/4367
Reviewed-by: Evan Huus <eapache@gmail.com>
Added a new dissector for the Dynamic Source Routing (DSR) protocol (RFC 4728)
It should correctly dissect all DSR packets, including the "Flow State
Extension" DSR packets.
See Bug #10499 for capture file
Change-Id: Ie33a1a2fe095cab19d5abfbfa8e1c79fec664a35
Reviewed-on: https://code.wireshark.org/review/4251
Reviewed-by: Bill Meier <wmeier@newsguy.com>
Also add the S7 Communication dissector's author to AUTHORS.
Mention that the Qt UI is now the default.
Change-Id: Ie2629333fd48bbe1ce95052292336a4f8608ea17
Reviewed-on: https://code.wireshark.org/review/3988
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
All credit for development should go Qiaoyin Yang
CP2179 protocol is a serial based protocol. The 2179 protocol is implemented with minor variations between vendors.
The RTAC implemented the 2179 client supporting a limited function codes and command codes. The RTAC doesn't support
multiple function codes in a single request and the dissector also doesn't support decoding these or corresponding responses.
Bug:10285
Change-Id: I217bf4185c52b0b183f69b3b5aa84613340d3944
Reviewed-on: https://code.wireshark.org/review/3089
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Change-Id: I7f65d22d4dd96908033c764461196a75716b298a
Reviewed-on: https://code.wireshark.org/review/3961
Reviewed-by: Michael Mann <mmann78@netscape.net>
Thanks to Michał Orynicz for finish Logcat support.
Also update our hall of fame. One note:
my real name is Michał Łabędzki, but if you write
Michal Labedzki it will be ok too.
Change-Id: I81ae563fa1347f1fee316e0ff79a87722ff88d0b
Reviewed-on: https://code.wireshark.org/review/3764
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
This is the first version of a Ceph dissector. It is not complete but
is far enough along to be helpful to many people working with Ceph.
Currently the dissector can fully dissect the Ceph protocol and has
support for full dissection of most common messages. For the other
messages for which full dissection is not available their metadata is
parsed and shown along with the raw data of the different message
sections.
Change-Id: Ic7917a3d01148c6fe2f9ea2c13ecd09ecc06c2d7
Reviewed-on: https://code.wireshark.org/review/1889
Reviewed-by: Bill Meier <wmeier@newsguy.com>
Change-Id: Iebddc7be48d6e6aeb3a8620e0cb902fb4d6206b2
Reviewed-on: https://code.wireshark.org/review/3233
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Change-Id: I899dafbdf0f1aa94b71ca1dcb93d1ef1b2039386
Reviewed-on: https://code.wireshark.org/review/3200
Reviewed-by: Michael Mann <mmann78@netscape.net>
(e.g. opendaylight, nox, openvswitch, etc) still use legacy port
numbers. The most common are 6633 and 6634. This patch adds a
simple heuristic logic and uses the current uint preference as
additional input. In most cases no user intervention is needed and
OpenFlow is automatically detected/dissected.
Change-Id: Iebf09b7b870efe9d52421b9acc238208d25d4565
Signed-off-by: Francesco Fondelli <francesco.fondelli@gmail.com>
Reviewed-on: https://code.wireshark.org/review/921
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Spawned from https://www.wireshark.org/lists/wireshark-dev/201402/msg00024.html
Add some ignore rules for files that can't/shouldn't include a license header.
Reorganize some ignore rules to group rules with similar motivations.
Add a header to autogen.sh and attribute it to just "The Wireshark Authors"
since while Gilbert wrote the original version it's gone through so many changes
over the years that sorting out proper authorship is unnecessarily complex.
Add headers to Graeme Hewson's two files as verified by private email, and
update his address in the AUTHORS file per his request.
Add header to one of Ulf Lamping's files, as verified by private email.
Only remaining problem is the reedsolomon code.
Change-Id: Ifb7de8c4b4d79012553e29d459a0145d39f51df5
Reviewed-on: https://code.wireshark.org/review/145
Reviewed-by: Evan Huus <eapache@gmail.com>
There is no public spec, based only on analyze of packet
It is more easy to found the address IP of Intant AP
Change-Id: I3baf205c5e4ad699b954f4a9fbf4b9e65f82cb36
Reviewed-on: https://code.wireshark.org/review/121
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Evan Huus <eapache@gmail.com>
From İbrahim Can Yüce
From me: Update to new tcp_dissect_pdus format, minor whitespace issues noticed in wiretap files.
svn path=/trunk/; revision=53669
From Deon van der Westhuysen
- Bug fix: object leak in stats_tree after a tap reset (for example apply statistics preferences with a stats_tree window open)
- Bug fix: correct sample code in README.stats_tree
- Add: slash in plug-in name now creates submenu as docs describe (was a bug?)
- Add: menu separator before the stat_tree registered plug-ins
- Add: stats_tree can now calculate averages for nodes; automatically calculated for range nodes. Add section in README.stats_tree describing averages.
- Add: stats_tree can now calculate burst rate of each node (like rate but with a shorter, sliding time window)
- Add: sorting for stats_tree plug-ins. Can sort on node name, count, average, min, max values and burst rate.
- Add: preferences for stats_tree system (default sort column, burst calc params)
- Add: stats_tree window copy to clipboard and export and plain text, csv and XML.
- Added sample of new functionality in $srcdir/plugins/stats_tree/pinfo_stats_tree.c
- Moved all stats_tree sample plug-ins to "IP Statistics" submenu.
svn path=/trunk/; revision=53657
dissector for Kyoto Tycoon binary protocol
from me:
make port range preference work
highlight the correct bytes for records
remove trailing commas
correct(?) 64->32 cast
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9418
svn path=/trunk/; revision=53383
See: https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9324
From me:
1. Move certain global vars to local storage in dissect_tfp_common()
2. Declare all remaining global vars as static;
3. Fix some bugs:
- base58_encode() needed to be called before call to col_add_fstr()
- display of UID string in tree was being truncated to 4 characters
4. Cleanup whitespace: use consistent indentation (tabs); remove trailing whitespace;
5. Add editor modelines
svn path=/trunk/; revision=52931
Compilation fails on (only the ?) OSX-10.6-x64 buildbot with error:
netscaler.c: In function 'nstrace_read_v30':
netscaler.c:1295: warning: implicit conversion shortens 64-bit value into a 32-bit value
(Life is too short for me to dig multiple levels deep into a set of macros to try to see which
actual line of code is causing the problem. Maybe the patch submitter can identify the problem).
svn path=/trunk/; revision=52666
Add reassembly support for AFS.
From me: minor tweaks to conform to other reassemblable protocols; indentation
fixes; modelines
svn path=/trunk/; revision=52113
TODO :
* Support HTTP Header Compression (draft-ietf-httpbis-header-compression)
* Enhance display of Data
* Reassembling of continuation frame (and other frame)
* Add same tap and ping/pong time response
svn path=/trunk/; revision=51591
Dissector for the Sippy RTPproxy controlling protocol. RTPproxy is a well-known
(among SIP-engineers) application and it operates using its own simple
text-based protocol. There are several competing products but all of them
implements it (sometimes slightly extending).
svn path=/trunk/; revision=51417
This patch adds XRO (Exclude Routes) support to RSVP dissector. It
also extends coverage of some new Attribute Flags (LSP_ATTRIBUTES object).
svn path=/trunk/; revision=51199
Add support for the Cisco MetaData (0x8909) ethertype.
From me:
Don't try to register the "eth.type" abbreviation; use "cmd.type" instead.
Add SVN id.
Clean up trailing white space and fix up some indentation.
Don't declare a variable static that need not be.
svn path=/trunk/; revision=51198
From Bart Van Assche.
Changes:
- Add REGISTER AND MOVE and REPLACE LOST RESERVATION service actions.
- Decode the PARAMETER LIST LENGTH field correctly - this is a four
byte field instead of a two byte field.
- For the REGISTER AND MOVE service action, add support for decoding
the RELATIVE TARGET PORT IDENTIFIER, TRANSPORT ID LENGTH and
TransportID fields.
- Fix parsing of the SERVICE ACTION field - this field is five bits
wide instead of four.
- Move the definition of the "scsi.persresv.control.unreg" field just
below the other REGISTER AND MOVE service action parameter list fields.
See also http://www.t10.org/cgi-bin/ac.pl?t=f&f=spc4r36h.pdf.
- Only display persistent reservation information in a PERSISTENT
RESERVE IN response if the ALLOCATION LENGTH field in the request
was not zero.
- Correct the offset of the (SPC-2) SCOPE-SPECIFIC ADDRESS field.
This field starts at offset 16 and not at offset 8.
- Correct the offsets of the SCOPE and TYPE fields. These fields
are both contained in the byte at offset 21.
- Correct the base of the TRANSPORTID LENGTH field from BASE_HEX
into BASE_NONE since this is the base required by non-numeric types.
For more information, see also:
* http://www.t10.org/cgi-bin/ac.pl?t=f&f=spc4r36h.pdf
* http://www.t10.org/cgi-bin/ac.pl?t=f&f=spc2r20.pdf
svn path=/trunk/; revision=51152
In SSH, the protocol version message is terminated by CR LF. Wireshark, in the
info column, strips out the LF, but not the CR.
Attaching a patch to rectify that.
Also, as requested, update the contributor's email address in AUTHORS.
svn path=/trunk/; revision=50902
João Valverde