interface statistics, have its error messages come out as sync-pipe
errors, have it send a sync-pipe "success" message on success, and have
the callers get that message and display it.
svn path=/trunk/; revision=32843
build without libpcap, to make sure that works, and then do a build with
libpcap, to put into a binary release. It's the former that's failing;
I'll back out the previous change and then work on that.
svn path=/trunk/; revision=32801
if_capabilities_t - it doesn't fail on Snow Leopard, even if I undefine
HAVE_PCAP_CREATE, and doesn't fail on the Leopard PPC buildbot, either.
svn path=/trunk/; revision=32799
monitor mode at the same time that we fetch its list of link-layer
types. Support fetching that list in monitor mode, as the list may be
different in regular and monitor mode. If the interface supports
monitor mode, when printing the list of link-layer types, indicate
whether they're fetched in monitor mode or not, as tcpdump 4.1.x does.
svn path=/trunk/; revision=32789
libpcap/WinPcap and the capture mechanism atop which they run might
either silently limit the buffer size to a smaller value or raise it to
a higher value - that's the part that's platform-dependent.
svn path=/trunk/; revision=32718
the code to print the machine-readable format into dumpcap, and have the
code in capture_opts.c just print the human-readable format.
svn path=/trunk/; revision=32714
standard error and, in Wireshark on Windows, create a console if
necessary. Have the cmdarg_err routines use them.
Use *fprintf_stderr() to print the output of -L, rather than using
cmdarg_err_cont(), so that we don't get extra newlines in the output (it
should look similar to the output of tcpdump).
svn path=/trunk/; revision=32711
interface by running dumpcap, so that if you need privileges to open an
interface, and dumpcap has those privileges, neither TShark nor
Wireshark need them.
svn path=/trunk/; revision=32710
pcap_set_buffer_size() did as well, so there aren't any libpcap releases
with pcap_create() but not pcap_set_buffer_size().
Only do one check for pcap_create.
svn path=/trunk/; revision=32695
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=475
BUT not activating the check for
pcap_create()
pcap_set_buffer_size()
This should make it possible to build with support for setting the buffersize if not capturing 802.11 traffic.
The code for handling the 'B' option should be OK in any case.
svn path=/trunk/; revision=32688
If the user specifies -V or -x, turn on print_packet_info (-S) so they actually
get some output in case we're also writing to a file.
svn path=/trunk/; revision=32486
Note: This is a behavior change:
Given the default value for the console_log_level preference
tshark will now show ERROR, CRITICAL and WARNING level log messages.
Prior to this change tshark was hardwired to show only
ERROR and CRITICAL level messages.
Time will tell whether this change results in too much noise
in tshark output.
svn path=/trunk/; revision=29328
a protocol tree;
the column values.
This includes stats-tree listeners.
Have the routines to build the packet list, and to retap packets, honor
those requirements. This means that cf_retap_packets() no longer needs
an argument to specify whether to construct the column values or not, so
get rid of that argument.
This also means that there's no need for a tap to have a fake filter
to ensure that the protocol tree will be built, so don't set up a fake
"frame" filter.
While we're at it, clean up some cases where "no filter" was represented
as a null string rather than a null pointer.
Have a routine to return an indication of the number of tap listeners
with filters; use that rather than the global num_tap_filters.
Clean up some indentation and some gboolean vs. gint items.
svn path=/trunk/; revision=28645
routines handled by epan/report_err.c.
Move copy_binary_file() in file.c to epan/filesystem.c, and rename it to
copy_file_binary_mode() (to clarify that it *can* copy text files;
arguably, *all* files are "binary" unless you're on, say, an IBM 1401
:-)). Have it use the report_err.c routines, so it works in
console-mode programs.
Clean up some comments while we're at it.
svn path=/trunk/; revision=27456
capinfos and dumpcap don't need to depend on libwireshark nor directly pull
in those modules). Because capinfos and editcap were only being linked with
privileges.c if we had plugins, this allows those programs to be linked when
someone is compiling --without-plugins.
svn path=/trunk/; revision=25640
libwireshark (and the plugins using those functions) do not depend on
wiretap on Windows.
While doing that, rename the eth_* functions to ws_*.
svn path=/trunk/; revision=25354
the right thing in Wireshark and TShark, as both of them call
epan_init() to set the appropriate "report an error" function.
That obviates the need to have TShark have its own private version of
simple_dialog().
Have cmdarg_err() just call failure_message() instead of duplicating the
code in failure_message().
svn path=/trunk/; revision=25201
proto.[hc]
define new APIs to allow delayed registration of protocol fields,
so that dissectors with "flexible" fields like xml, radius, diameter,
snmp do not have to load their files at startup but can do so as late as possible.
gtk/dfilter_expr_dlg.c :
have the expression dialog registering all prefixes so that all fileds appear in the dialog
tshark.c
register all prefixes when called with -G
epan/radius_dict.l
epan/dissectors/packet-radius.c
epan/dissectors/packet-radius.h
refactor registration to delay dictionary loading as long as possible
svn path=/trunk/; revision=24762
used within a display filter.
(the usefullness of "frame.time_delta_displayed" in a display filter is very limited
since it bites it's own tail. Still, wireshark and tshark should at least show the
same behaviour)
svn path=/trunk/; revision=24708
- Change apply / prepare / ... as filter to use the field's value, which
is now stored in fdata as well as cinfo. Now we don't have to reprocess
the entire packet list when using these features. This also prevents
the use of these features from overwriting custom column information.
(custom columns can now be used in apply / prepare ... as filter)
- Break col_expr and col_expr_val out into a struct that is included not only
in cinfo, but now also fdata.
- Have col_custom_set_fstr() quote FT_STRING & FT_STRINGZ when storing the
col_expr_val value (for filter creation).
svn path=/trunk/; revision=24511
The attached patch makes the Statistics -> RTP -> Show All Streams feature of
wireshark accessible via tshark.
I found it helpful in dealing with tons of RTP captures.
svn path=/trunk/; revision=24252
configure and use more than one set of preferences and configuration files.
This can be found in the "Configuration Profiles..." menu item from the Edit
menu, or by pressing Shift-Ctrl-A. It's also possible to start wireshark
and tshark with a named profile by using the "-C ProfileName" option.
A new status pane in the main window will show the current profile.
The configuration files currently stored in the Profiles are:
- Preferences
- Capture Filters
- Display Filters
- Coloring Rules
- Disabled Protocols
- User Accessible Tables
The recent data are by design not added to the profile.
Planned future enhancements:
- make a more convenient function to switch between profiles
- add a "clone profile" button to copy an existing profile
- make the profiles list active and accept return as OK
- save users "Decode as" in the profile
- make new, clone and deletion of profiles more secure
- make some of the recent values available in the profile
This patch also fixes:
- setting default status pane sizes
- a bug setting status pane for packets when not having main lower pane.
svn path=/trunk/; revision=24089
that we can find out what the signal action for SIGHUP is without
changing it).
That renders report_counts() safe to use at the end of a capture; do so.
Clean up indentation.
svn path=/trunk/; revision=23256
We can simply block waiting for input from the child process because we are
in a CLI that does not need to worry about updating a GUI while we're waiting
for packets and so forth.
Before I realized that I wrote a working (for me) method using select() that
I've left in for now (#ifdef'd out).
svn path=/trunk/; revision=22999
rewrite the tshark capture code almost completely, to use dumpcap instead of it's own pcap functionality.
This works on Win32 and should work on unix/linux (but I'm not sure here). Some stuff needs to be cleaned up, some more may need to be rewritten to specifically work with unix/win32. Futher work needs to be done at:
1. read filters (simply document current behaviour?)
2. event loop polling
3. privileges
4. code cleanup (e.g. in capture_loop.c)
Be prepared that tshark might not work as before / expected at least in the next days!
svn path=/trunk/; revision=22969
fetch the major OS version. If we're running Windows >= 6 (Vista)
_and_ npf.sys isn't running, warn the user in Wireshark and TShark.
Add a recent prefs item to disable the warning in Wireshark.
svn path=/trunk/; revision=22877
setuid instead of Wireshark. Remove the "DANGEROUS" notices, but leave it
disabled by default. Whine if the user runs Wireshark or TShark as root.
Add a preference to disable the whining. Add a "setuid-root" script that
can be used to switch dumpcap and TShark's setuid-ness on and off for
development and testing. Update the release notes and README.packaging.
svn path=/trunk/; revision=22733
Try to call get_interface_descriptive_name() as little as possible (storing
the result in capture_opts) to avoid a performance hit during live capture
(especially if you have lots of interfaces) and to avoid leaking memory.
One issue with this is that capture_opts.c cannot (without adding significant
dependencies) set the iface_descr so readers of that field (only gtk/main.c
and tshark.c) use a macro to (set if not already set and) get the value of
that field.
svn path=/trunk/; revision=22587
that "-D" and "-L" should produce machine-readable output. Use this to
move an indirect get_pcap_linktype() call from the GUI to dumpcap.
svn path=/trunk/; revision=22367
Add a capture_interface_list(), which works similar to
get_interface_list() except that it forks dumpcap instead of calling
the pcap routines directly. Use it in the GUI.
Add a "-I" flag to dumpcap, which prints out verbose interface
information.
Tested under Windows and Linux.
svn path=/trunk/; revision=22071
it's a pointer to an arbitrary object, assumed to be correctly aligned,
not a pointer to a not-necessarily-properly-aligned array of bytes.
Cast it, so we won't get alignment warnings.
svn path=/trunk/; revision=21940
epan/filesystem.c
have get_plugin_dir() calling init_plugin_dir() if necessary
epan/epan.c and epan/report_err.c
move the report_failure family into the new report_err.c file, have epan_init() calling the initializer
epan/plugins.h and epan/proto.c
do not have init_plugins() calling the proto_reg functions instead do it in init_proto()
gtk/main.c and tshark.c
init_plugin_dir() has become suprefluous
capinfos.c and editcap.c
load the wiretap plugins
Makefiles
do what's needed to build withe the above changes.
svn path=/trunk/; revision=21935
Guy Harris