Treat systemd journal entries filetype-specific events instead of
packets.
Add support for reading and writing systemd journal entries to pcapng.
Note that pcapng IDBs should be optional.
Add support for REC_TYPE_FT_SPECIFIC_EVENT where needed.
Change-Id: Ided999b1732108f480c6c75323a0769a9d9ef09f
Reviewed-on: https://code.wireshark.org/review/29611
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a file parser and dissector that can handle the output of
`journalctl -o export`. From here we can add a systemd journal extcap
and possibly support for the JSON and binary formats.
Change-Id: I01576959b2c347ce7ac9aa57cdb5c119c81d61e9
Reviewed-on: https://code.wireshark.org/review/29311
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Do some renaming.
Change-Id: If8fa85370014f9618df38d97048dd1c52a4c389f
Reviewed-on: https://code.wireshark.org/review/28918
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Or, at least, use them in the libwiretap file-writing code; we can
change other places to use them as appropriate.
Change-Id: I63af2267a22a158ee23f3359b043913dac0e285b
Reviewed-on: https://code.wireshark.org/review/28783
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Strip off only extensions that correspond to file types we know about;
QFileInfo::baseName() strips off *all* extensions, where "extension" is
"anything preceded by a .", so it turns foo.bar.pcap.gz into foo, not
foo.bar. We don't want that; instead, we strip off only those
extensions that correspond to file types we know how to read, so we'd
strip off .pcap.gz in foo.bar.pcap.gz, and strip off .pcap in
foo.bar.pcap, leaving foo.bar in both cases.
Change-Id: I5385921ad2f0fef815d52e9902fef15735fd9dae
Reviewed-on: https://code.wireshark.org/review/28636
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit dfd6eb5d68.
This change cannot be submitted without change I5c0c7668bda969086d9d6e5069aad87e929f6340.
Change-Id: Ieb22f4e9afa1742db861a291202a2790a4784e1b
Reviewed-on: https://code.wireshark.org/review/27387
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Wiretap support for reading the Unigraf DPA-400 DisplayPort
AUX channel monitor logfiles.
Bug: 14651
Change-Id: I8d3c50575c9806dd04b40053db45564404bad103
Reviewed-on: https://code.wireshark.org/review/27312
Reviewed-by: Guy Harris <guy@alum.mit.edu>
In wtap_get_savable_file_types_subtypes(), in the search for a default
file type to use, stop as soon as we've found a usable file type, don't
keep searching.
Bug: 14601
Change-Id: Iff4ffe14f5ad07271c49a761e0856059353c1634
Reviewed-on: https://code.wireshark.org/review/27193
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Separate the stuff that any record could have from the stuff that only
particular record types have; put the latter into a union, and put all
that into a wtap_rec structure.
Add some record-type checks as necessary.
Change-Id: Id6b3486858f826fce4b096c59231f463e44bfaa2
Reviewed-on: https://code.wireshark.org/review/25696
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Instead, just:
assume a file with the regular pcap magic number is a regular pcap
file, not an unhelpfully-modified-without-changing-the-magic-number
format such as one of the (fortunately, short-lived) memory-mapped
capture formats or the Nokia format;
reject a file with the memory-mapped-capture-finally-changed-the-
magic-number magic number, as they then changed the *new* format
without changing its magic number;
and don't even leave a provision for multiple formats using the
"nanosecond pcap" magic number - not even when reading from a file -
so we can punish bad behavior (which is what changing the format
without changing the magic number is).
This should get rid of the last place where, when reading a pcap file
from a pipe, the first packet isn't displayed as soon as it arrives.
Bug: 14345
Change-Id: I2fcb3354dc84cdd2d8ec749a0db883e56971c4b4
Reviewed-on: https://code.wireshark.org/review/25383
Reviewed-by: Guy Harris <guy@alum.mit.edu>
At one point, I remember a discussion resulting in the official name of
the next-generation replacement for pcap format being changed to
"pcapng", with no hyphen.
Make Wireshark reflect that.
Change-Id: Ie66fb13a0fe3a8682143106dab601952e9154e2a
Reviewed-on: https://code.wireshark.org/review/25214
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The check that the pcapng code does is "do we have a non-null
addrinfo_lists_t * and, if so, does it have a non-null ipv4_addr_list or
ipv6_addr_list"?
The check that the file-save code was using was just "do we have a
non-null addrinfo_lists_t *", so sometimes it'd think we couldn't do a
"quick save" even though we had no name resolution information to write
out to the capture file.
Make a routine that does that check, and use it in *both* places.
Change-Id: Id4720f4fe4940354320b2b7621ca5e37e45ec1f3
Reviewed-on: https://code.wireshark.org/review/25055
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add a CMake target that dumps the help output for our command line tools
to individual files. Include those files in the tools appendix instead
of pasting them in manually.
Fixup the output of some tools so that they pass the pre-commit checks.
Change-Id: I925f24818422a190927a96531c21f4d16d3fe5b5
Reviewed-on: https://code.wireshark.org/review/23737
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Support per-packet comments in ERF_TYPE_META through a new Anchor ID
extension header with per-Host unique 48-bit Anchor ID which links an
ERF_TYPE_META record with a packet record. There may be more than one
Anchor ID associated with a packet, where they are grouped by Host ID
extension header in the extension header list. Like other ERF_TYPE_META
existing comments should not be overwritten and instead a new record
generated. See erf_write_anchor_meta_update_phdr() for detailed comments
on the extension header stack required.
As Wireshark only supports one comment currently, use the one one with
the latest metadata generation time (gen_time). Do this for capture
comment too.
Write various wtap metadata in periodic per-second ERF_TYPE_META records
if non-WTAP_ENCAP_ERF or we have an updated capture comment.
Refactor erf_dump to create fake ERF header first then follow common
pseudoheadr and payload write code rather than two separate code paths.
Support an ERF_HOST_ID environment variable to define Wireshark's Host
ID when writing. Defaults to 0 for now.
ERF dissector updates to support Anchor ID extension header with basic
frame linking.
Update ERF_TYPE_META naming and descriptions to official name
(Provenance)
Core changes:
Add has_comment_changed to wtap_pkthdr, TRUE when a packet
opt_comment has unsaved changes by the user.
Add needs_reload to wtap_dumper which forces a full reload of the file
on save, otherwise wireshark gets confused by additional packets being
written.
Change-Id: I0bb04411548c7bcd2d6ed82af689fbeed104546c
Ping-Bug: 12303
Reviewed-on: https://code.wireshark.org/review/21873
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stephen Donnelly <stephen.donnelly@endace.com>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Correct some symbolic references in source file comments
and add a note about the CMake configuration options.
Change-Id: Idb670a2c798c2a52cdce142340ce8fc5a2022508
Reviewed-on: https://code.wireshark.org/review/22138
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Use WTAP_MAX_PACKET_SIZE_STANDARD, set to 256KB, for everything except
for D-Bus captures. Use WTAP_MAX_PACKET_SIZE_DBUS, set to 128MB, for
them, because that's the largest possible D-Bus message size. See
https://bugs.freedesktop.org/show_bug.cgi?id=100220
for an example of the problems caused by limiting the snapshot length to
256KB for D-Bus.
Have a snapshot length of 0 in a capture_file structure mean "there is
no snapshot length for the file"; we don't need the has_snap field in
that case, a value of 0 mean "no, we don't have a snapshot length".
In dumpcap, start out with a pipe buffer size of 2KB, and grow it as
necessary. When checking for a too-big packet from a pipe, check
against the appropriate maximum - 128MB for DLT_DBUS, 256KB for
everything else.
Change-Id: Ib2ce7a0cf37b971fbc0318024fd011e18add8b20
Reviewed-on: https://code.wireshark.org/review/21952
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Either 1) it can be determined from the libwiretap encapsulation type,
in which case it's redundant information or 2) there *is* no pcap/pcapng
link-layer header type for that encapsulation type, in which case you
need to check for the attempt to determine it failing and handle that
failure appropriately.
Change-Id: Ie9557b513365c1fc8c6df74b9c8239e29aad46bc
Reviewed-on: https://code.wireshark.org/review/21924
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That's more consistent.
Handle the "libpcap" names for backwards compatibility.
Change-Id: I819404d69bddd733b7ee38e23d3ddc71110c0faf
Reviewed-on: https://code.wireshark.org/review/21172
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Avoid anachronisms, however; there was no "macOS 10.0" or even "OS X
10.0", for example. It was "Mac OS X" until 10.8 (although 10.7 was
sometimes called "OS X" and sometimes called "Mac OS X"), and it was "OS
X" from 10.8 to 10.11.
Change-Id: Ie4a848997dcc6c45c2245c1fb84ec526032375c3
Reviewed-on: https://code.wireshark.org/review/20933
Reviewed-by: Guy Harris <guy@alum.mit.edu>
If plugin_list was NULL, plugin_types didn't get cleaned.
Add test and set of open_info_arr.
Change-Id: I7669e3ba86039fb2b26ff2da64f51896053c5e68
Reviewed-on: https://code.wireshark.org/review/20195
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I76ea675625ef2812f51bad0c37f6c58060897f55
Reviewed-on: https://code.wireshark.org/review/20172
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
It's a non-null pointer to a character string with the value "NULL".
You want just NULL, with no quotes.
Change-Id: I51bfb73a3002f46f13a8f513d07b1ddc009a14cb
Reviewed-on: https://code.wireshark.org/review/20123
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have programs that use libwiretap call that routine rather than
separately calling some or all of init_open_routines(),
wtap_register_plugin_types(), and wtap_opttypes_initialize().
Also don't have routines internal to libwiretap call those. Yes, this
means doing some initialization work when it isn't necessary, but
scattering on-demand calls throughout the code is a great way to forget
to make those calls.
Change-Id: I5828e1c5591c9d94fbb3eb0a0e54591e8fc61710
Reviewed-on: https://code.wireshark.org/review/19069
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That way, we can close the resulting wtap_dumper the same way we close
any other wtap_dumper, including closing the FD, rather than trying to
do everything *except* closing the FD (which is tricky for a FILE *).
Change-Id: I8cb66e32784d73e598b2e8720a12f9bdab1c6205
Reviewed-on: https://code.wireshark.org/review/19054
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Mirrors the behavior of wtap_close.
Change-Id: I1a04878fdd0409fa74931737332f9b8a1ae77fb1
Reviewed-on: https://code.wireshark.org/review/17620
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
We support reading some types of files that aren't capture files, in
case we have a dissector for that file format (because, for example,
it's often transported over HTTP). Don't include them in the set of
files "All Capture Files" matches; you can still look for them as they
have individual entries in the drop-down menu of file type patterns.
Ultimately, there should be Fileshark/TFileshark programs to read those
files - and other file types, and even capture files if the goal is to
look at the file structure rather than at the packets - and *that's* the
program that should offer the ability to load JPEGs and so on.
(No, this does not reduce the "All Capture Files" list down to a level
that makes the problem in bug 12837 go away. The right way to fix
*that* is to arrange, somehow, that the "All Capture Files" entry not
actually list all the suffixes it matches.)
Change-Id: I705bff5fcd0694c6c6a11892621a195aa7cd0264
Reviewed-on: https://code.wireshark.org/review/17619
Reviewed-by: Guy Harris <guy@alum.mit.edu>
A block can have zero or more instances of a given option. We
distinguish between "one instance only" options, where a block can have
zero or one instance, and "multiple instances allowed" options, where a
block can have zero or more instances.
For "one instance only" options:
"add" routines add an instance if there isn't one already
and fail if there is;
"set" routines add an instance if there isn't one already
and change the value of the existing instance if there is one;
"set nth" routines fail;
"get" routines return the value of the instance if there is one
and fail if there isn't;
"get nth" routines fail.
For "multiple instances allowed" options:
"add" routines add an instance;
"set" routines fail;
"set nth" routines set the value of the nth instance if there is
one and fail otherwise;
"get" routines fail;
"get nth" routines get the value if the nth instance if there is
one and fail otherwise.
Rename "optionblock" to just "block"; it describes the contents of a
block, including both mandatory items and options.
Add some support for NRB options, including IPv4 and IPv6 option types.
Change-Id: Iad184f668626c3d1498b2ed00c7f1672e4abf52e
Reviewed-on: https://code.wireshark.org/review/16444
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This doesn't try to use any data from multiple Name Resolution blocks, it
just converts single Name Resolution block usage into a GArray, so the
potential is there to then use/support multiple Name Resolution blocks
within a file format (like pcapng)
Change-Id: Ib0b584af0bd263f183bd6d31ba18275ab0577d0c
Reviewed-on: https://code.wireshark.org/review/15684
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This doesn't try to use any data from multiple Section Header blocks, it
just converts single Section Header block usage into a GArray, so the
potential is there to then use/support multiple Section Header blocks
within a file format (like pcapng)
Change-Id: I6ad1f7b8daf4b1ad7ba0eb1ecf2e170421505486
Reviewed-on: https://code.wireshark.org/review/15636
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Ping-Bug: 10203
Change-Id: Ifa24870d711449b87e9839dd46af614e4aa28fde
Reviewed-on: https://code.wireshark.org/review/15608
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
Register Wireshark for PacketLogger, ERF, IPFIX, and VWR files on
freedesktop.org, OS X, and Windows (we were already registered for ERF and VWR
files on Windows).
Change-Id: I8105997cb15ea06e1c078489fd88763d4ce9e40c
Reviewed-on: https://code.wireshark.org/review/15635
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Also add a length parameter to wtap_optionblock_set_option_string
Change-Id: I8c7bbc48aa96b5c2a91ab9a17980928d6894f1ee
Reviewed-on: https://code.wireshark.org/review/15505
Reviewed-by: Anthony Coddington <anthony.coddington@endace.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Chances are they want to include the file extension in wiretap's list of
file extensions (for the File->Open dialog) as well as the various files
needed for integration with the various desktop environments that
Wireshark supports.
(I should have put this advice there years ago when creating the
freedesktop.org mime-package file.)
Add a comment to the mime-package file explaining its purpose, giving
a link to the specification, and talking about MIME types and the registration
thereof.
Change-Id: I60540bf88062b7a90653888534405f6aef4f657c
Reviewed-on: https://code.wireshark.org/review/15011
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
By putting it in this list the File->Open dialog will include an option for
*.mplog files.
Change-Id: Icf6480f7be1023650262fc1f3996a390e137cb88
Reviewed-on: https://code.wireshark.org/review/15048
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
the mplog format is used by some commercial logging tools that capture
ISO 14443 traffic between a card reader and a contactless smartcard
Change-Id: If359b8f0f671eb2a7c6315e2b8960a5bd581a9e9
Reviewed-on: https://code.wireshark.org/review/14950
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Gerald Combs