should be used (on success, have it return 0). Exit with that exit
status; if the problem is that we couldn't get the interface list or if
there are no interfaces in that list, return 2, as that's not a
command-line syntax error.
svn path=/trunk/; revision=46108
Friendly Names for interfaces on Windows
Notes on the changes the patch covers:
* if_info_t struct: addition of friendly_name
* Dumpcap Interface list format changes:
+ Win32: "dumpcap -D" shows friendly_name in place of descript if known
+ All: machine interface "dumpcap -D -Z none" includes friendly_name in the
list in addition to the existing parameters
* interface_options struct: addition of console_display_name
+ When an interface name is displayed in a console, it will typically be the
console_display_name (instead of name).
+ console_display_name is used as the basis of the autogenerated temp
filenames
+ console_display_name is typically set to the friendly_name if known,
otherwise it is set to the interface name
* Enhancements to capture_opts_add_iface_opt() (the function which process -i
options).
+ Can now specify the interface using its name and friendly_name
+ Interface name matching is case insenstive
+ Name matching first attempts exact matching, then falls back to prefix
matching
(e.g. dumpcap -i local)
+ Validates interface names, instead of blindly sending them off to
winpcap/libpcap
+ Interface specification by number is still supported.
* capture_opts_trim_iface() has been refactored:
+ Instead of repeating a decent chunk of the cost in
capture_opts_add_iface_opt(), it calls capture_opts_trim_iface() to specify the
interface.
* introduction of capture_win_ifnames.[ch] (windows only code)
+ Implements static function GetInterfaceFriendlyNameFromDeviceGuid() - a
windows version independant function to convert an interface guid into its
friendly name. Uses published api functions on windows vista and higher, but
falls back to unpublished API functions on older windows releases.
+ void get_windows_interface_friendlyname(/* IN */ char
*interface_devicename, /* OUT */char **interface_friendlyname); - extracts the
GUID from the interface_devicename, then uses
GetInterfaceFriendlyNameFromDeviceGuid() to do the resolution
* Auto temp filename generation:
+ Now uses wireshark_pcapng_* or wireshark_pcap_* depending on file format
+ Basis temp filename format on console_display_name
+ Win32: if console_display_name is a windows interface guid, extracts
numbers from GUID here (instead of in interface option processing)
GUI CHANGES:
* Dialog that displays when you click the "Manage Interfaces" button (within
Capture Options dialog) has been renamed from "Add new interfaces" to
"Interface Management"
* ui/gtk/capture_dlg.c: new_interfaces_w variable renamed to
interface_management_w
* Win32: Local Interfaces tab on Interface Management dialog, shows includes
friendly name as far left column
* Interface Management dialog defaults to larger size on win32 - so it fits
without resizing local interfaces tab
* Interface Management dialog now saves preferences when you click the apply
button (local hidden interfaces was not persisting across restarts)
* Tweaks: "Interface Details" dialog (Interface list->Capture Interfaces ->
Details):
+ "Friendly Name" renamed to "NDIS Friendly Name"
+ Added "OS Friendly Name" to the top of the list
* Win32: The "Capture Interfaces" dialog now shows the friendly name instead of
device guid
* Welcome screen:
+ The height of the interface list scrollbox dynamically adjusts & updates to
the number visible interfaces.
Up to 10 interfaces can be listed without a scroll bar, the minimum height
is for 2 interfaces.
+ Win32: now shows just the Friendly Name if known - in place of
"Interfacename_Guid:(Description)"
svn path=/trunk/; revision=46083
capture_opts.h. (It arguably belongs somewhere other than in a file in
ui/gtk, but, if so, move it there, e.g. to something in ui.)
svn path=/trunk/; revision=41712
test scripts are passed.
Use a global list containing all interfaces and only change
properties of the entries when changes are made in the GUI.
Do not misuse the list of interfaces specified on the command
line anymore.
This patch does not provide any new functionality, it just
provides the base for future extensions like removing
remote interface, mulitple airpcap devices and multiple
pipes.
This patch was provided by Irene Ruengeler.
svn path=/trunk/; revision=40715
Use a global list containing all interfaces and only change
properties of the entries when changes are made in the GUI.
Do not misuse the list of interfaces specified on the command
line anymore.
This patch does not provide any new functionality, it just
provides the base for future extensions like removing
remote interface, mulitple airpcap devices and multiple
pipes.
This patch was provided by Irene Ruengeler.
svn path=/trunk/; revision=40693
properties of the entries when changes are made in the GUI.
Do not misuse the list of interfaces specified on the command
line anymore.
This patch does not provide any new functionality, it just
provides the base for future extensions like removing
remote interface, mulitple airpcap devices and multiple
pipes.
This patch was provided by Irene Ruengeler.
svn path=/trunk/; revision=39495
configure that you want to capture on multiple remote interfaces
on mulitple hosts.
Improve some #ifdef mess in dumpcap.
svn path=/trunk/; revision=37178
Use consistent naming of variables on capture_options.
Make pcap sampling independent of remote capturing, since
it seems to work local pcap devices using winpcap (at
least that is what the documentation says).
svn path=/trunk/; revision=37176
parameters. An array of interface specific data is handled
in addition to the current way.
This change should not have any effect right now, it will
be used by dumpcap when supporting multiple interfaces
(and tshark/wireshark... in the future).
svn path=/trunk/; revision=37082
as in other places of the code. Such that this is consistently
used. While there, clean up some whitespaces.
This fix was provided by Irene Ruengeler which testing
remote capturing (with multiple interfaces).
svn path=/trunk/; revision=36112
so we give a non-zero exit status for invalid interfaces or capture
filters.
From me: don't exit immediately if dumpcap failed, print out information
from taps and the like.
svn path=/trunk/; revision=33393
build without libpcap, to make sure that works, and then do a build with
libpcap, to put into a binary release. It's the former that's failing;
I'll back out the previous change and then work on that.
svn path=/trunk/; revision=32801
if_capabilities_t - it doesn't fail on Snow Leopard, even if I undefine
HAVE_PCAP_CREATE, and doesn't fail on the Leopard PPC buildbot, either.
svn path=/trunk/; revision=32799
monitor mode at the same time that we fetch its list of link-layer
types. Support fetching that list in monitor mode, as the list may be
different in regular and monitor mode. If the interface supports
monitor mode, when printing the list of link-layer types, indicate
whether they're fetched in monitor mode or not, as tcpdump 4.1.x does.
svn path=/trunk/; revision=32789
the code to print the machine-readable format into dumpcap, and have the
code in capture_opts.c just print the human-readable format.
svn path=/trunk/; revision=32714
interface by running dumpcap, so that if you need privileges to open an
interface, and dumpcap has those privileges, neither TShark nor
Wireshark need them.
svn path=/trunk/; revision=32710
pcap_set_buffer_size() did as well, so there aren't any libpcap releases
with pcap_create() but not pcap_set_buffer_size().
Only do one check for pcap_create.
svn path=/trunk/; revision=32695
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=475
BUT not activating the check for
pcap_create()
pcap_set_buffer_size()
This should make it possible to build with support for setting the buffersize if not capturing 802.11 traffic.
The code for handling the 'B' option should be OK in any case.
svn path=/trunk/; revision=32688
don't need global_capture_opts don't need to have it declared and thus
don't need capture_options defined.
Include gtk/capture_globals in the files in question.
Change some more capture_opts references to refer to
global_capture_opts.
Change some global_capture_opts references in routines with a
capture_opts argument to refer to capture_opts.
The structure type is capture_options, not capture_opts; fix some
references.
Include <sys/types.h>, if it's present, in capture_opts.h, so we get
gid_t defined.
Clean up indentation.
svn path=/trunk/; revision=25574
setting, and is used only in dumpcap.c, and needs to get at information
set by dumpcap's signal handlers so it can respond to ^C; move it to
dumpcap.c, rename it print_statistics_loop(), and make it set ld.go to
TRUE before looping and loop only as long as ld.go is TRUE.
That fixes bug 2592 (at least on Mac OS X, and probably on other UN*Xes;
it should fix it on Windows as well).
svn path=/trunk/; revision=25492
- retrieving the list of remote PCAP interfaces
- password authentication support
- UDP data fransfer
- packet sampling (available in WinPcap 4.x)
etc.
fix problem if non-default rpcap port is used
svn path=/trunk/; revision=23750
setuid instead of Wireshark. Remove the "DANGEROUS" notices, but leave it
disabled by default. Whine if the user runs Wireshark or TShark as root.
Add a preference to disable the whining. Add a "setuid-root" script that
can be used to switch dumpcap and TShark's setuid-ness on and off for
development and testing. Update the release notes and README.packaging.
svn path=/trunk/; revision=22733
Try to call get_interface_descriptive_name() as little as possible (storing
the result in capture_opts) to avoid a performance hit during live capture
(especially if you have lots of interfaces) and to avoid leaking memory.
One issue with this is that capture_opts.c cannot (without adding significant
dependencies) set the iface_descr so readers of that field (only gtk/main.c
and tshark.c) use a macro to (set if not already set and) get the value of
that field.
svn path=/trunk/; revision=22587
this in the GUI rather than calling pcap_stats() directly. This gets rid
of the last pcap_open_live() call in the GUI code. Update
README.packaging.
svn path=/trunk/; revision=22443
that "-D" and "-L" should produce machine-readable output. Use this to
move an indirect get_pcap_linktype() call from the GUI to dumpcap.
svn path=/trunk/; revision=22367
Add a capture_interface_list(), which works similar to
get_interface_list() except that it forks dumpcap instead of calling
the pcap routines directly. Use it in the GUI.
Add a "-I" flag to dumpcap, which prints out verbose interface
information.
Tested under Windows and Linux.
svn path=/trunk/; revision=22071
that obviates the need to check for a null capture filter string, and
fixes bug 1055.
Keep track of whether it was set from the command line, though, so we
can catch attempts to set the filter more than once, and attempts to set
it when we're not capturing.
Clean up white space.
svn path=/trunk/; revision=19047
even if doing a live capture; just print the packets without saving
them.
In dumpcap:
default to the capturing the entire packet;
don't do the "Press any key" stuff when debugging on UN*X;
do console logging (to the standard error) even when we're
running as the capture child (the sync pipe should only be the
standard output, not the standard error).
svn path=/trunk/; revision=17786