Move the boolean flag for using captured DNS packet info for name resolution
to the Name Resolution preferences settings, as it was rather surprising to
disable Name Resolution preferences and still have names being resolved. Also
disble them all if the '-n' command line switch is used, and re-enable it for
a 'd' character in the '-N' option.
Bug: 10337
Change-Id: Ie4d47bab0100db3360cc447cd3e446b2e39aa917
Reviewed-on: https://code.wireshark.org/review/9786
Petri-Dish: Hadriel Kaplan <hadrielk@yahoo.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Have address_to_name() be a routine that takes an address and returns a
string with a "sufficiently long" lifetime for use in columns, using the
address type's addr_name_res_str routine for most address types, rather
than having a too-small set of address types wired into it. It replaces
both the internal solve_address_to_name() routine and get_addr_name(),
and can, for example, handle the special WLAN address types rather than
leaving them unresolved even with an ethers file.
Change-Id: Id09bc412adf5d2752155650a14a77c5378af2e42
Reviewed-on: https://code.wireshark.org/review/9475
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This is mostly to reduce tvb_get_ptr calls that were used to pass into get_ether_name.
Some optimizations were made to packet-ieee80211.c in the process of conversion.
Change-Id: I81d3c65d4c09a15237fc287c2e989eb6e6936b1f
Reviewed-on: https://code.wireshark.org/review/7492
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Model get_manuf_name after get_ether_name so that a string (either name resolved or colon-separated bytes) is always stored in a hash table. This will make name resolution of addresses perform a little better because it doesn't have to worry about the wmem_allocator.
Change-Id: If976fe7b0c3f9cd053225096c2ac05418f061af6
Reviewed-on: https://code.wireshark.org/review/7081
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
One use in a GUI function isn't really enough to justify making the structure public.
Change-Id: Ic7dee275ba0a2bd4e19c06702a867417c5624c27
Reviewed-on: https://code.wireshark.org/review/7080
Reviewed-by: Michael Mann <mmann78@netscape.net>
Model get_manuf_name after get_ether_name so that a string (either name resolved or colon-separated bytes) is always stored in a hash table. This will make name resolution of addresses perform a little better because it doesn't have to work about the wmem_allocator.
Change-Id: I80f465ae0845290255a659ab63310ac3cc35506e
Reviewed-on: https://code.wireshark.org/review/7075
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
One use in a GUI function isn't really enough to justify making the structure public.
Change-Id: I6d70b9bacbc0fa1898150f59c0c69779a6cd5d51
Reviewed-on: https://code.wireshark.org/review/7074
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I973c672e9d573ad67e9b9fd82a5610aaf8a74efa
Reviewed-on: https://code.wireshark.org/review/6605
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Also replaced comments mentioning se_alloc memory with wmem_file_scope, since it's more accurate.
It seems that many of the TShark stat taps may be leaking memory, because the hash tables created by the taps don't get a chance to be freed. Somewhat academic since TShark exits shortly after displaying any stats, but a leak none the less.
Change-Id: I8ceecbd00d65b3442dc02d720b39c2e15aa0c8a6
Reviewed-on: https://code.wireshark.org/review/6557
Reviewed-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I57d2e435ac72ea07ec9a567e0b1ce4410966e3d2
Reviewed-on: https://code.wireshark.org/review/6419
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Adjust any other ep_ related APIs related to the transition.
Change-Id: I961b371c2c4bda557e0f1817705c27eef0dae66c
Reviewed-on: https://code.wireshark.org/review/6388
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I4f1078b20f41800f72a751612703ad0d4c2ae87b
Reviewed-on: https://code.wireshark.org/review/6323
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Almost all instances require using "manual" memory management, but it gets some ep_ calls out of the GUI.
Change-Id: Ifa7303766b08d09442ccf3d7063cbe061578ecd9
Reviewed-on: https://code.wireshark.org/review/6318
Reviewed-by: Michael Mann <mmann78@netscape.net>
Changed all remaining code in wslua that was using emem, to use wmem or
simpler methods.
Bug: 9927
Change-Id: I3d19a770e0fd77d996bdb6b61a76a722cc2bcd55
Reviewed-on: https://code.wireshark.org/review/6109
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Petri-Dish: Hadriel Kaplan <hadrielk@yahoo.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add ep_ to routines that may return ephemeral strings.
Change "get_XXX" to "XXX_to_display" if the routine returns a formatted
string if it can't get a name.
Change-Id: Ia0e82784349752cf4285bf82788316c9588fdd88
Reviewed-on: https://code.wireshark.org/review/1217
Reviewed-by: Guy Harris <guy@alum.mit.edu>
"get_addr_name()" -> "ep_address_to_display()", to 1) indicate that it
returns a string with ephemeral scope and 2) indicate that it maps an
address to a "displayable" form - a name if possible, an address string
if not.
"se_get_addr_name()" -> "get_addr_name()", to indicate that its strings
have the same scope as "get_ether_name()", "get_hostname()", and
"get_hostname6()".
Change-Id: If2ab776395c7a4a163fef031d92b7757b5d23838
Reviewed-on: https://code.wireshark.org/review/1216
Reviewed-by: Guy Harris <guy@alum.mit.edu>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Ref https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9082
Since this commit the IP (source and destination) address in the GUI will be
replaced with some date after I click on the entry, reverting this commit fixes
the problem.
This looks like a memory corruption. I imported an older pcap file.
svn path=/trunk/; revision=51579
the various name resolvers; put those two routines next to each other.
Add generic addr_resolv_init() and addr_resolv_cleanup() routines which call
all of those internal routines.
Call the generic init/cleanup routine from epan_init() and epan_cleanup().
Create the hash tables for each name resolver in those initialization routines
in order to avoid having to repeatedly check if the table is already created
or not (and to avoid glib warnings if we neglected to perform that check):
http://www.wireshark.org/lists/wireshark-dev/201308/msg00012.html
Don't clean up hostnames in init_dissection(): it's done already in cleanup_dissection().
Don't initialize hostnames in cleanup_dissection(): it's done already in init_dissection().
svn path=/trunk/; revision=51191
host_name_lookup_process(). If, in the future, we find that we need an
argument for changes we're making, we can add it then.
svn path=/trunk/; revision=45269
Add a new name resolution option: whether or not use the configured (in the OS)
name resolver (e.g., DNS) to resolve network names. When this option is disabled
but network name resolution is enabled then Wireshark will resolve only those
names that it can from local sources. This includes (at least, AFAIK):
- name resolutions that Wireshark picks up on from DNS packets it decodes
- the "user hosts file" (~/.wireshark/hosts on *NIX)
- what Wireshark reads out of capture file (the PCAPNG name resolution block)
This new preference defaults to "use external resolvers" for backward
compatibility (so people turning on network name resolution will get the old
behavior).
This option can be set via Edit->Preferences and on the command line; there
remain several UIs (e.g., the "open capture file" dialog, the
View->Name Resolution menu, etc.) that don't have the new option yet.
Also expand on the "description" for the name resolution preferences: these
are used not only in the tooltips but are also written to the preferences
file. The previous text didn't include enough context when written do the
preferences file.
svn path=/trunk/; revision=43605
which take an OUI, presumably fetched with a routine such as
tvb_get_ntoh24(), as an argument and attempt to look it up in the manuf
file.
Fix up the comments for all the get_manuf_name routines.
Get rid of "extern"s in definitions of functions (definitions, not
declarations).
svn path=/trunk/; revision=42054
the TVB.
Introduce and start using tvb_get_manuf_name() and tvb_get_manuf_name_if_known()
which do the same as the non-tvb versions but take a tvb and an offset instead
of (commonly) a pointer into a TVB.
svn path=/trunk/; revision=37317
* Remove proto_tree_add_eui64 function from 802.15.4 Dissector
* Replace print_eui64/print_eui64 by eui64_to_str/get_eui64_name
* Update Documentation (README.dev)
* Add new function in libwireshark.def
* Support of encoding for tvb_eui64_to_str
* Use FT_EUI64 for ICMPv6, CAPWAP, Zbee ... dissector
svn path=/trunk/; revision=37015