Move */ to a separate line below the SPDX identifier.
Change-Id: Id1032215449cfccae0933147b45e04b65e0b727f
Reviewed-on: https://code.wireshark.org/review/27211
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make sure err_str is valid before trying to assign a value.
Change-Id: I4e6524b93101ef28158996797e8462168e44dc2a
Reviewed-on: https://code.wireshark.org/review/27173
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
When normal interfaces are unavailable (chmod -x dumpcap), and after
toggling "Disable external capture interfaces" twice and then refreshing
the interfaces list (F5), a double-free occurs in ui/iface_lists.c:147
for "global_capture_opts.ifaces_err_info".
Change-Id: I98697653ab1c123186892408112c34afdd1766f5
Fixes: v1.99.0-rc1-1005-g35b4487538 ("Handle empty interface lists when the list changes.")
Reviewed-on: https://code.wireshark.org/review/27161
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
It has been replaced by cmake.
Change-Id: I83a5eddb8645dbbf6bca9f026066d2e995d8e87a
Reviewed-on: https://code.wireshark.org/review/26969
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Switch to a single Doyxgen configuration which was generated using a
recent version of Doxygen and customized to suit our needs. Add
wsar_html and wsar_html_zip targets to CMake. Update some Doxygen markup
and documentation as needed.
Change-Id: Ic8a424b292c35a26f74ae0b53322265683e56e69
Reviewed-on: https://code.wireshark.org/review/26976
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Except for the one directory that (currently) has "not yet clean" files,
epan/dissectors, we don't need a separate variable to keep track of the
"clean" source files.
In the cases where not all files were in CLEAN_FILES, put them into the
variable used to enable -Werror or its equivalent.
Change-Id: Ic4119861c1d9e381adfe31e9977e1ac71d623f5b
Reviewed-on: https://code.wireshark.org/review/25830
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Now the callers are responsible for deallocating argv: not doing it
can lead to memleaks.
Change-Id: I45dc0826c0430e38426eb64555664892744aa2d5
Reviewed-on: https://code.wireshark.org/review/25369
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Ask, in a comment, why we're doing PeekNamedPipe() when we're trying
to read everyting in the pipe, up to the EOF, into a string.
On UN*X, do the same "read up to an EOF and then NUL-terminate the
result" stuff that we did on Windows; nothing guarantees that, on all
UN*Xes, in all circumstances, until the end of time, world without end,
amen, we can do one read and get the entire string.
Change-Id: I578802b23fec1051139eaefd9a09fe2a6de06a11
Reviewed-on: https://code.wireshark.org/review/24959
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have the routines that create them take a pointer to a struct
packet_provider_data, store that in the tvbuff data, and use it to get
the wtap from which packets are being read.
While we're at it, don't include globals.h in any header files, and
include it in source files iff the source file actually uses cfile. Add
whatever includes that requires.
Change-Id: I9f1ee391f951dc427ff62c80f67aa4877a37c229
Reviewed-on: https://code.wireshark.org/review/24733
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have cfile-int.h declare the structure, and use it in files that
directly access the structure.
Have cfile.h just incompletely declare the structure and include it
rather than explicitly declaring it in source files or other header
files.
Never directly refer to struct _capture_file except when typedeffing
capture_file.
Add #includes as necessary, now that cfile.h doesn't drag in a ton of
Change-Id: I7931c8039d75ff7c980b0f2a6e221f20e602a556
Reviewed-on: https://code.wireshark.org/review/24686
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That allows a parallel typedef of ws_in4_addr for guint32.
Change-Id: I03b230247065e0e3840eb87635315a8e523ef562
Reviewed-on: https://code.wireshark.org/review/24073
Reviewed-by: Guy Harris <guy@alum.mit.edu>
In preparation for possibly using AUTOUIC in CMake which treats "ui_*.h"
files specially, rename ui_util.h. No other changes.
Change-Id: Id026572c000b713ff0e9388dc7fff8d81d4df73e
Reviewed-on: https://code.wireshark.org/review/23916
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Autotools has the very useful feature by design of allowing the user
to override the default build flags (you break it you keep it).
Apparently CMake applies COMPILE_OPTIONS target property after
CMAKE_{C,CXX}_FLAGS so that doesn't work here. Prepend our flags to those
variables instead to make it work then.
Specific target flag overrides can still be added with COMPILER_OPTIONS
(e.g: generated files with -Wno-warning) but this is less effective and
then we're back at the point where this overrides user flags. It's less
of a concern though.
Change-Id: I44761a79be4289238e02d4e781fef0099628817b
Reviewed-on: https://code.wireshark.org/review/23675
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Change access of ifaces elements from by val to by reference.
With this change unnecessary copying of the whole struct is avoided
but even more important is that elements no longer have to be
removed and inserted whenever data is updated.
This change aims to make it more clear that ifaces elements shall
never directly be removed from the array. Instead use function
capture_opts_del_iface
NOTE: Code for GTK UI not updated
Ping-Bug: 13864
Change-Id: I04b65d5ee36526b30d959b8e5a2a48a3c7c4f15b
Reviewed-on: https://code.wireshark.org/review/23204
Reviewed-by: Anders Broman <a.broman58@gmail.com>
On Windows the pipe names does not get random characters appended.
Add the interface name and pipe type to make it unique.
This partly fixes the issue with capturing from multiple extcap
interfaces on Windows.
Ping-Bug: 13653
Ping-Bug: 13833
Change-Id: I4290b37cf789bf77608993682a803aca29513d28
Reviewed-on: https://code.wireshark.org/review/23158
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
pcap provides a pcap_set_tstamp_type function, which can be used to request
hardware timestamps from a supporting kernel.
This patch adds support for aforementioned function as well as two new
command line options to dumpcap, wireshark and tshark:
--list-time-stamp-types
List time stamp types supported for the interface
--time-stamp-type <type>
Change the interface's timestamp method
Name choice mimics those used by tcpdump(1), which already supports this
feature. However, unlike tcpdump, we provide both options unconditionally.
If Wireshark was configured without pcap_set_tstamp_type being available,
--list-time-stamp-types reports an empty list.
Change-Id: I418a4b2b84cb01949cd262aad0ad8427f5ac0652
Signed-off-by: Ahmad Fatoum <ahmad.fatoum@siemens.com>
Reviewed-on: https://code.wireshark.org/review/23113
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add the "interval" option to "-b". Each new capture starts at the
exact start of a time interval. For instance, using -b interval:3600
will start a new capture file at each whole hour.
Changed the duration option in the GUI interfaces to use the new
interval option.
Change-Id: I0180c43843f5d2f0c2f50153c9ce42ac7fa5aeae
Reviewed-on: https://code.wireshark.org/review/22428
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Sake Blok <sake.blok@SYN-bit.nl>
Just let libpcap pick the snapshot length; that way, for link-layer
types that need a really large snapshot length, such as D-Bus (which
requires 128MB for the largest messages), it can pick that, but can
otherwise pick something that doesn't require as much memory, e.g.
256KB.
For pcap_open_live() and pcap_open(), which don't have a way of saying
"give me what's appropriate", pick 256KB.
Change-Id: Idef5694f7dfa85eaf3a61d6ca7a17d263c417431
Reviewed-on: https://code.wireshark.org/review/21917
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add a "report a warning message" routine to the "report_err" code in
libwsutil, and rename files and routines appropriately, as they don't
only handle errors any more.
Have a routine read_enabled_and_disabled_protos() that reads all the
files that enable or disable protocols or heuristic dissectors, enables
and disables them based on the contents of those files, and reports
errors itself (as warnings) using the new "report a warning message"
routine. Fix that error reporting to report separately on the disabled
protocols, enabled protocols, and heuristic dissectors files.
Have a routine to set up the enabled and disabled protocols and
heuristic dissectors from the command-line arguments, so it's done the
same way in all programs.
If we try to enable or disable an unknown heuristic dissector via a
command-line argument, report an error.
Update a bunch of comments.
Update the name of disabled_protos_cleanup(), as it cleans up
information for disabled *and* enabled protocols and for heuristic
dissectors.
Support the command-line flags to enable and disable protocols and
heuristic dissectors in tfshark.
Change-Id: I9b8bd29947cccdf6dc34a0540b5509ef941391df
Reviewed-on: https://code.wireshark.org/review/20966
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Our user-facing messages should have a helpful (or at the very least
neutral) tone. In English, exclamation points are neither. Replace a
bunch of them with periods.
Change-Id: I29c3b2f84c25e06aae5b559860224559053a0378
Reviewed-on: https://code.wireshark.org/review/20189
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
If the loading of the physical interface list failed, no extcap
interfaces will be loaded as well. Fix that, so that we search for
the extcap interfaces, even when no other interfaces have been found
Change-Id: Ib8e86f1f8d2a1565724ef3532d41ecea3ceddb55
Reviewed-on: https://code.wireshark.org/review/18352
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Instead of checking for the boolean "FALSE", just set an empty string.
This avoids the need to check for WERROR_COMMON_FLAGS before using it.
The transformation is the same for all files, remove
"if (WERROR_COMMON_FLAGS)" and "endif()", reindent and add quotes (since
we have a string here and not a list).
Modelines have been added where missing.
Change-Id: I0ab05ae507c51fa77336d49a99a226399cc81b92
Reviewed-on: https://code.wireshark.org/review/17997
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Dario Lombardo <lomato@gmail.com>
Document the the 802.11 set channel function and its parameters.
Add support for optional parameters.
Bug: 12896
Change-Id: I95966f99149aa9c1502d97b5707dcc8c2f5b26e8
Reviewed-on: https://code.wireshark.org/review/17699
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Setting our compiler warning flags in CMAKE_C_FLAGS does not allow
using different flags per target.
Allow for that possibility by setting the internal WS_WARNINGS_{C,CXX}_FLAGS
and using the COMPILE_OPTIONS property to set them.
This change is just setting mechanism and there should be no difference
in generated warnings.
The check_X_compiler_flag cmake test is changed to test each flag individually.
We need a list, not a space separated string, and the aggregate test is not
significant.
Change-Id: I59fc5cd7e130c7a5e001c598e3df3e13f83a6a25
Reviewed-on: https://code.wireshark.org/review/17150
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
This patch reads out the stderr messages from an extcap
utility and displays it to an user. It was tested on Qt
but not on GTK, but should work their as well.
On Mac OS/X and Windows the child_watch does not behave
as it was intended. Therefore in extcap_cleanup, the callbacks
are called manually, if and only if, they have not been
called already.
The reason why it displays two error messages is, that
by the time the first one is being displayed, glib has not
returned from the spawned process on Linux yet. So there
is no way to add the stderr correctly, and putting a handler
to stderr into interface_opts will lead to memory errors,
cause then the code tries to access memory outside of its
protection.
Bug: 11892
Change-Id: I2db60dd480fed3e01428b91a705057e4f088bd15
Reviewed-on: https://code.wireshark.org/review/12954
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Allow stored options to be restored to their default values. This
adds a global cleanup method for extcap and globally defined
preference values, which fixes the parameter problem with windows
Change-Id: I48e0cf846ef81f4732d652c6a2ad0020db5df08e
Reviewed-on: https://code.wireshark.org/review/13741
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Now that nmake build system has been removed they are not needed anymore.
Change-Id: I88075f955bb4349185859c1af4be22e53de5850f
Reviewed-on: https://code.wireshark.org/review/16050
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Move error handling and argument quoting routines from
capchild to wsutil, as those methods will be used by
extcap_spawn as well.
Change-Id: I2c4515fefd5aecad317fcdaefa721734288f792c
Reviewed-on: https://code.wireshark.org/review/16123
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Roland Knall <rknall@gmail.com>
Done for performance improvements.
This could probably be done in checkAPIs.pl, but this was just
a quick manual check with grepping.
Change-Id: I91ff102cb528bb00fa2f65489de53890e7e46f2d
Reviewed-on: https://code.wireshark.org/review/15751
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
This generates a top level target, checkAPI, that is
excluded from the ALL build target, so must be run separately.
On Windows using a Visual Studio generator, call
msbuild /p:Configuration=RelWithDebInfo checkAPI.vcxproj
Change-Id: I44a57c564dcfc75499463b942436f4b920a82478
Reviewed-on: https://code.wireshark.org/review/14873
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Make sure we zero our PROCESS_INFORMATION struct before passing it to
CreateProcess.
Change-Id: Ib42320965bb7b2d37a9fc106d78ace02153e48d2
Reviewed-on: https://code.wireshark.org/review/15154
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
CreateProcess can modify its second (lpCommandLine) argument. Don't
pass it the output of utf_8to16.
Constify the return value of utf_8to16.
Change-Id: I0d4361396e90c88a4ab2a3f2f0e058230e897fdf
Reviewed-on: https://code.wireshark.org/review/15155
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This didn't fix the test failures.
This reverts commit e5f4c5c8a8.
Change-Id: I0cff5eff88d2b49806797cef83338dbbace42a4c
Reviewed-on: https://code.wireshark.org/review/15135
Reviewed-by: Gerald Combs <gerald@wireshark.org>
As the MSDN documentation says, "CreateProcess returns without waiting
for the new process to finish its initialization." Add an SP_INIT sync
pipe indicator on Windows and use it in dumpcap to signal to its parent
that it has started up.
Change-Id: I88a4c158871dbe2dd6eba13434e92c5d4b1c2e4b
Reviewed-on: https://code.wireshark.org/review/15132
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Replace some function calls with their non-deprecated equivalents so
that we can remove _CRT_NONSTDC_NO_DEPRECATE from CMakeLists.txt and
config.nmake.
Leave _CRT_SECURE_NO_DEPRECATE in place. Removing it failed with 145
warnings and 72 errors.
Note that we could probably improve startup performance by using wmem
in diam_dict.*.
Change-Id: I6e130003de838aebedbdd1aa78c50de8a339ddcb
Reviewed-on: https://code.wireshark.org/review/14883
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Stig Bjørlykke