Dissector for HSR and PRP-1
Here is a patch that adds a dissector for HSR and for PRP-1. Both protocols are defined in IEC62439 Part 3. (High-availability Seamless Redundancy / Parallel Redundancy Protocol)
The existing PRP dissector has been refactored to support both the old PRP (now called PRP-0) and the new PRP-1.
There are three distinct dissectors:
- HSR (ethertype 892F)
- HSR/PRP supervision (ethertype 88FB)
- PRP-0 and PRP-1 (trailer dissector; disabled by default)
From me :
* Fix Clang Warning
* Add modification for CMakeLists.txt
svn path=/trunk/; revision=39692
Also did some whitespace cleanup, converting tabs to spaces since most of the file was spaced, not tabbed, and swapped the order that the lg and ig bits get added to the tree because I think it looks better reading bits left-to-right.
TODO: I'm not entirely sure what to do in capture_eth() if that invalid range is encountered, so for now I just added some #if 0'd code as a placeholder.
Ref: http://www.wireshark.org/lists/wireshark-users/201106/msg00127.html
svn path=/trunk/; revision=37832
Add support for dissecting TDLS (IEEE 802.11z) frames.
These are mostly used as Action frames that are encapsulated in Data frames (to go through any AP).
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5493
svn path=/trunk/; revision=35208
draft-ietf-isis-ext-eth specifies an extension to current Ethernet Frame
specifications for hardware and frame format to support payloads greater than
1500 Bytes for Type interpretation and Length interpretation frames.
The extension introduced by draft-ietf-isis-ext-eth is currently used by Cisco
Systems' IS-IS routing protocol implementation when running IS-IS over Ethernet
links with large MTU.
svn path=/trunk/; revision=34748
From me: A few minor changes:
- col-clear() not req'd;
- Use 'gint32 length' rather than 'guint8 length';
- Use ENC_NA instead of FALSE/TRUE in two cases;
- Move global tdmoe_handle to be local to proto_reg_handoff...
svn path=/trunk/; revision=33307
This is a patch for a new dissector that decodes Nokia Siemens Networks'
proprietary Flow Layer Internal Protocol (Ethertype 0x8901).
svn path=/trunk/; revision=31069
This contains the source for dissecting TTEthernet packets (including Protocol Control Frames) conforming to our TTEthernet specification as dissector for Wireshark.
svn path=/trunk/; revision=26955
FIP is the FCoE Initialization Protocol. FCoE is Fibre-Channel over Ethernet.
FIP is being finalized in t11.org, and further changes are not expected.
svn path=/trunk/; revision=25748
Wireshark expects 802.1ah Instance tags to have ethernet type 0x88f0, but latest
802.1ah draft 4.1 defines the 802.1ah Instance tag ethernet type to 0x88e7.
svn path=/trunk/; revision=25442
This is a dissector for the Parallel Redundancy Protocol (PRP) defined in chapter
6 of the IEC 62439.
PRP uses two independent networks in parallel and allows redundancy without
switchovers.
The protocol is sending Mac multicast messages with Ethertype 0x88fb. In
addition to that it adds to every Ethernet frame a 4 byte trailer before
the FCS. The trailer is detected by checking a size field and an identifier
which are part of the trailer. Therefore, if the last 4 bytes of a frame
match a correct trailer they get interpreted as a trailer, although it was
probably not a real one.
Note:
This is a post-dissector which means it gets called for every frame. So as
to not cause a performance hit for every Wireshark user (who may not even be
looking at Ethernet frames) it currently disables itself every time Wireshark
starts up. (There should be a better way to do this--maybe different Profiles
(as discussed on -dev recently) is the way to go.)
From me:
Put ETHERTYPE_PRP (not IANA registered) in etypes.h and packet-ethertype.c
svn path=/trunk/; revision=24493
Author :
Richard Kuemmel <r.kuemmel[AT]beckhoff.de>
Updates and bugfixes:
Peter Johansson <peterjohansson73[AT]gmail.com>
svn path=/trunk/; revision=23174
Attached is a patch file and a new dissector for FCoE. This protocol
is described at http://fcoe.com and has been submitted to T11. It is an encapsulation protocol that can be used to transport FC frames over raw Ethernet when the link is loss-free due to pause. The Ethertype 0x8906 has been reserved through IEEE for this protocol.
svn path=/trunk/; revision=21967
Attachment is a patch for adding a new Juniper NSRP dissector. In this patch, OICQ author email address
<dubingyao@gmail.com> has also been updated to <secfire@gmail.com>.
svn path=/trunk/; revision=21599
packet-cisco-wireless.c is actually trying to dissect WLCCP:
I have attached a dissector I wrote from scratch for the
frames that I'm seeing. It has #defines for the field offsets and
lengths so it should be easier to merge. I also attached a sample
capture with one of the frames that I'm seeing. There are more fields
in the frame I haven't yet figured out, hopefully your dissector has
those that I'm missing.
Me: - Commented in wlccp over udp as well, it works most of the time.
- Leave the file packet-cisco-wireless.c in for the time being to
copy over knowledge until no usable info is left in the file.
svn path=/trunk/; revision=19447