FT_STRINGZPAD is for null-*padded* strings, where the field is in an
area of specified length, and, if the string is shorter than that
length, all bytes past the end of the string are NULs.
FT_STRINGZTRUNC is for null-*truncated* strings, where the field is in
an area of specified length and, if the string is shorter than that
length, there's a null character (which might be more than one byte, for
UCS-2, UTF-16, or UTF-32), and anything after that is not guaranteed to
have any particular value.
Use IS_FT_STRING() in some places rather than enumerating all the string
types, so that those places get automatically changed if the set of
string types changes.
We started allowing source files to be encoded as UTF-8 in April 2019 in
bd75f5af0a. Update README.developer to match.
README.developer no longer has a "Code style" section, so update the
Developer's Guide to point to the "Portability" section.
FT_STRINGZ should be used *ONLY* if the string is *ALWAYS* supposed to
have a null terminator, either because the length isn't otherwise
specified, so that it can only be determined by finding the terminating
null character, or because a character count *and* a NULL terminator are
both used (yes, there appear to be some cases where that's true).
FT_STRINGZPAD is null-padded rather than null-terminated; this is
typically used for fixed-length fields that contain a string value that
might be shorter than the fixed length.
Change-Id: Ifdf421ca666482583a4dfc76167eae6dc473f48a
Reviewed-on: https://code.wireshark.org/review/38137
Reviewed-by: Guy Harris <gharris@sonic.net>
This proposal adds a new option '-b printname:<filename>' to dumpcap. If
used, dumpcap will print the name of each ring buffer file it creates
after it is closed. Allows the use of '-'/'stdout' and 'stderr'.
Use case: Since the file name is printed after the file is closed for
writing, an automated capture process can do something like the
following with the guarantee that the file in question will not be
changed.
dumpcap -i eth0 -b files:2 -b printname:stdout [-b ...] | \
while read cap_file_name ; do
# Do something with $cap_file_name
done
This sort of scripting is difficult in dumpcap's current form. Dumpcap
prints the names of new files to stderr as it *opens* them, so a script
attempting to use this must sleep for "-b duration:value" seconds plus
some fudge time to be sure it's getting a closed, unchanging file.
Change-Id: Idb288cc7c8c30443256d35c8cd4460a2e3f0861c
Reviewed-on: https://code.wireshark.org/review/37994
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add the `--capture-comment "comment"` option for appending pcapng
comments to the SHB of the output file(s).
Add the `--discard-capture-comment` option for removing pcapng comments
present in the input file SHB(s) before writing to the output file(s).
Supports multiple comments per SHB. Noted in the documentation that
Wireshark itself doesn't support multiple comments.
Bug: 15033
Change-Id: If07a4e7a93505438639018783a11343cd5992f2a
Reviewed-on: https://code.wireshark.org/review/38074
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Allow user to specify time resolutions as fine as 1 nanosecond for the
start and stop times (-A and -B options) for editcap. Uses `nstime_t`
for the user options and `nstime_cmp()` to compare with packet
timestamps.
Change-Id: I2340bc4830c7d9a6b17a5e53fa4e8837e231bcb6
Reviewed-on: https://code.wireshark.org/review/38057
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The sshdump command is typically not invoked directly, and I need a
place to refer people to for configuring Wireshark.
Change-Id: I10fb3d88dbb3aea0bfcaf22aac90b36a7a8dc814
Reviewed-on: https://code.wireshark.org/review/37897
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
sshdump can now be copied in multiple instances. Each instance will
show up a different interface and will have its own profile.
This will help users connecting to different hosts. Instead of changing
profiles, sshdump can be cloned, and each instance will be used for a
single host.
Change-Id: If4fb42cf78021c6f16213ae91cbf41ec7f61ca77
Reviewed-on: https://code.wireshark.org/review/37883
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
We aren't using them now; stick to libpcap APIs (including Windows-only
libpcap APIs).
Change-Id: I812eaa31ba1e6e611418853105d3e00c9130a420
Reviewed-on: https://code.wireshark.org/review/37852
Petri-Dish: Guy Harris <gharris@sonic.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <gharris@sonic.net>
Our authors lists and man pages are encoded as UTF-8 and have been for
quite a while. Remove perlnoutf.pl and ensure that standard I/O uses
UTF-8 as described at
https://www.perl.com/pub/2012/05/perlunicook-make-all-io-default-to-utf-8.html/
Change-Id: I7016ec5e3a12934463b43bcfdde2c424069c20ac
Reviewed-on: https://code.wireshark.org/review/37817
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
In each of our executables we were calling "setlocale(LC_ALL, "")" at
startup. This told Windows that output was encoded using the current
system code page. Unless the code page was 65001 (UTF-8), this was a lie.
We write UTF-8 to stdout and stderr, so call "setlocale(LC_ALL, ".UTF-8)"
at startup on Windows. This lets the CRT translate our output correctly
in more cases.
Clarify and expand the OUTPUT section in the tshark man page.
Bug: 16649
Change-Id: If93231fe5b332c292946c7f8e5e813e2f543e799
Reviewed-on: https://code.wireshark.org/review/37560
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The static arrays are supposed to be arrays of const pointers to int,
not arrays of non-const pointers to const int.
Fixing that means some bugs (scribbling on what's *supposed* to be a
const array) will be caught (see packet-ieee80211-radiotap.c for
examples, the first of which inspired this change and the second of
which was discovered while testing compiles with this change), and
removes the need for some annoying casts.
Also make some of those arrays static while we're at it.
Update documentation and dissector-generator tools.
Change-Id: I789da5fc60aadc15797cefecfd9a9fbe9a130ccc
Reviewed-on: https://code.wireshark.org/review/37517
Petri-Dish: Guy Harris <gharris@sonic.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add some ENC_ values for various flavors of packed BCD, and use that
instead of explicitly calling tvb_bcd_dig_to_wmem_packet_str() and
adding the result.
Change-Id: I07511d9d09c9231b610c121cd6ffb3b16fb017a9
Reviewed-on: https://code.wireshark.org/review/36952
Reviewed-by: Guy Harris <gharris@sonic.net>
They were added in the code, but weren't documented.
Change-Id: Iaa12e2d33aa4a4b889c00a7f10b12b4c9b6e8197
Reviewed-on: https://code.wireshark.org/review/36953
Reviewed-by: Guy Harris <gharris@sonic.net>
Support for the -m (monospace font) flag was removed from Wireshark in
2.3/2.4 in g37252634c4. Remove it from the man page and help output.
Change-Id: Idaafeb6cd30d7deea6086a065168c91affd6f0ad
Reviewed-on: https://code.wireshark.org/review/36926
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Check is enabled by #ifdef ENABLE_CHECK_FILTER
Remaining issues found by this check are fixed here,
along with a documentation note that the entries
are checked in order and the first match is used.
The only issue not yet fixed is in packet-isup.c,
where the spec was not available to me.
Change-Id: Ife747cda9b91a265bc2b81ce0a53f55f3389919e
Reviewed-on: https://code.wireshark.org/review/36708
Petri-Dish: Martin Mathieson <martin.r.mathieson@googlemail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
Commit 3398c2898d duplicated the '-i'
option in the synopsis. Remove this again.
Change-Id: I85fb78515910b11e9dff9b3aa876746b2ff11fa4
Reviewed-on: https://code.wireshark.org/review/36678
Reviewed-by: Anders Broman <a.broman58@gmail.com>
As I said in
https://ask.wireshark.org/question/10361/how-to-properly-use-heuristic-dissector-for-tcp/?answer=10363#post-id-10363
"Should" has multiple meanings; there's "Used to indicate obligation,
duty, or correctness, typically when criticizing someone's actions.", as
in "I think we should trust our people more", and there's "Used to
indicate what is probable.", as in "the bus should arrive in a few
minutes". You're reading it in the latter sense; it was intended in the
former sense.
That sentence should probably be changed to "Wireshark must be then set
up..." to avoid the ambiguity.
Make it so (over half a year later, sigh), and change another case where
"should" is meant in the first sense while we're at it.
Change-Id: I90198d1616619c75802deeeb703ceee0c8bac1bf
Reviewed-on: https://code.wireshark.org/review/36155
Reviewed-by: Guy Harris <guy@alum.mit.edu>
In the README.plugins file there is still mention of autotools related items.
This change removes those lingering references.
Change-Id: I1fc7c6d478a6fc8bbe9481178d9f673aaebcad9f
Reviewed-on: https://code.wireshark.org/review/35843
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Update the Expert Information section of the User's Guide. Use the term
"Expert Information" to describe the dialog and "expert information
item" to describe each generated item. Update related text elsewhere.
Update the expert icon and other parts of the status bar docs.
Change-Id: I0c2cba0cbb3c74a1f6e3a37d4a2a592faccb350f
Reviewed-on: https://code.wireshark.org/review/35462
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Update the minimum version in various documents. Remove some
no-longer-needed code from scripts that call windeployqt.
Change-Id: I16da4bced9780c9f1b1969aae7c52e2fce1968aa
Reviewed-on: https://code.wireshark.org/review/35391
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Documentation of the Tshark and dumpcap command line options between
help text, manual page and user's guide diverged over time. One aspect
of this is the implementation of more long options. This change tries to
update all documentation to be complete and in sync again.
Change-Id: Ie8bee013df8d209080fcf288072774f18f9ff51f
Reviewed-on: https://code.wireshark.org/review/35261
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Generate a dissector based on doc/packet-PROTOABBREV.c.
Change-Id: I9233c1212acb30f7166ba91e39d98bc3fb123731
Reviewed-on: https://code.wireshark.org/review/35062
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Documentation of the Wireshark command line options between help text,
manual page and user's guide diverged over time. One aspect of this is
the implementation of more long options. This change tries to update
all documentation to be complete and in sync again.
Bug: 16168
Change-Id: Id833fbeb14fdb7b3dbc1564504a25d96f4367c91
Reviewed-on: https://code.wireshark.org/review/35047
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
This reverts commit f1285fcf06.
NSIS package is broken with this commit.
Change-Id: Ief22a308edad188fa2d5fab79355f19493359fa6
Reviewed-on: https://code.wireshark.org/review/34758
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
HTML docs are installed to both $docdir and $pkgdatadir. Fix that
to install to $docdir only.
Change-Id: I115158585b6df9170d9a01249adbc8548df91f14
Reviewed-on: https://code.wireshark.org/review/34640
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
The QUIC transport protocol provides a stream, similar to HTTP/2. Make
it possible to look at the stream contents. This can be helpful while
HTTP/3 support is not yet complete.
Known issues that will be addressed in the future:
- If a single packet contains multiple streams, then Follow QUIC Stream
will wrongly include data from streams other than the selected one.
This is tracked by bug 16093 and affects HTTP/2 as well.
- The Substream index menu does not properly filter for available
stream numbers. If a non-existing stream is selected, then changing
to another (potentially valid) index results in the "Capture file
invalid." error. As workaround, clear the display filter first.
- Follow Stream always selects Stream ID 0 instead of the first or
currently selected stream field in a packet. Users should manually
update the stream index as needed.
Change-Id: I5866be380d58c96f0a71a29abdbd1be20ae3534a
Ping-Bug: 13881
Reviewed-on: https://code.wireshark.org/review/34694
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The HTTP/2 protocol multiplexes a single TCP connection into multiple
independent streams. The Follow TCP output can interleave multiple
HTTP/2 streams, making it harder to analyze a single HTTP/2 stream.
Add the ability to select HTTP/2 Streams within a TCP stream.
Internally, the HTTP/2 dissector now stores the known Stream IDs in a
set for every TCP session which allows an amortized O(n) lookup time for
the previous/next/max Stream ID.
[Peter: make the dissector responsible for clamping the HTTP/2 Stream ID
instead of the Qt code, that should permit future optimizations.]
Change-Id: I5d78f29904ae8f227ae36e1a883155c0ed719200
Reviewed-on: https://code.wireshark.org/review/32221
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexander Gryanko <xpahos@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
proto_tree_add_bitmask_len also expects an expert information field
to display in the event that the decodeable length is less than the
specified length.
Bug: 16061
Change-Id: If8061b0754cd6862799ab76bf9c10e16ed5d8f38
Reviewed-on: https://code.wireshark.org/review/34567
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Make it consistent with -z conv,ip and -z endpoints,ip
Bug: 15660
Change-Id: I9a3d2e95fed47231c0bab20e6cf069987eed142f
Reviewed-on: https://code.wireshark.org/review/34426
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add '-J' option to synopsis and reshuffle '-j' to correct place.
Change-Id: I351b3ce464fca3b52a75614e1e8f8c91f9a30df2
Reviewed-on: https://code.wireshark.org/review/34352
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
WIRESHARK_CONFIG_DIR was introduced with Wireshark 3.0 and is more
cross-platform than WIRESHARK_APPDATA. The latter was presumably created
for use by PortableApps. Let's consider that an internal, undocumented
detail that might be change, and document WIRESHARK_CONFIG_DIR instead.
Change-Id: I0042d607b282cc6dee4b017b1e80b44087bd62e9
Reviewed-on: https://code.wireshark.org/review/34113
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
Change all wireshark.org URLs to use https.
Fix some broken links while we're at it.
Change-Id: I161bf8eeca43b8027605acea666032da86f5ea1c
Reviewed-on: https://code.wireshark.org/review/34089
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Remove some dead links or point them to archive.org while at it. All
updated links have been verified.
Change-Id: Icf02167a13d5fe9dfce39ea57525b3f185554c9d
Reviewed-on: https://code.wireshark.org/review/34028
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This new tap collects credentials (username and paassword)
from the dissectors.
So far, few dissectors have been instrumented:
- http (basic auth)
- http (header auth)
- ftp
Others can be instrumented as well using the same technique.
Tshark has a new option (-z credentials) and Wireshark a new
"tools" menu: the documentation has been updated accordingly.
Change-Id: I2d0d96598c85bb3ea4fb5ec090dd8dc28b481fc9
Reviewed-on: https://code.wireshark.org/review/33453
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Dario Lombardo <lomato@gmail.com>
We removed the "title" member from decode_as_t.
Update the sample code snippet accordingly.
Change-Id: I5d4ba979c955de50287f5b4deea7c64bf96f7d9b
Reviewed-on: https://code.wireshark.org/review/33574
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Bug: 15591
Change-Id: Icb8246ba196df026736ce1e54eb2ace2c7cd49b0
Reviewed-on: https://code.wireshark.org/review/33530
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a BASE_SHOW_ASCII_PRINTABLE flag for the "display" field, to use
with FT_BYTES and FT_UINT_BYTES fields; it specifies that, if the field
consists solely of printable ASCII characters, its value be displayed as
a string, in quotes. Have a routine hfinfo_format_bytes() to do that
formatting, depending on the display field value.
Add routines to fetch the display value of string and
FT_BYTES/FT_UINT_BYTES fields; for strings, it's the result of
hfinfo_format_text(), and for byte arrays, it's the result of
hfinfo_format_bytes().
Use BASE_SHOW_ASCII_PRINTABLE for extended attribute data in SMB and
SMB2. Use the routines in question for extended attribute names
(string) and data (bytes). That keeps us from displaying non-text
extended attribute data as if it were text.
Document BASE_SHOW_ASCII_PRINTABLE.
Change-Id: I24dcf459c14f00985e4daaf9b58f5933964eabd8
Reviewed-on: https://code.wireshark.org/review/33517
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Decode received payload as utf-8 string, replacing any invalid
characters with U+FFFD.
Change-Id: If80fbbec5c369f1098dbc1e46e092928aa0b0eb9
Reviewed-on: https://code.wireshark.org/review/33252
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Clarify *display* filter, add link to User's Guide, and update to https.
Change-Id: I9a2152213cf5b4cb3daf15e62c73074524d92f94
Reviewed-on: https://code.wireshark.org/review/32912
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Multicheck values can be checkable or uncheckable depending on the
"enabled" option. Moreover, multicheck values can be stacked into a
tree by providing a "parent" option.
Modify the example extcap to illustrate these possibilities.
Bug: 13355
Change-Id: I0c50ff873c07eca5cc4ae8036b87cbb440d318b3
Reviewed-on: https://code.wireshark.org/review/32842
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
In Python 3 strings cannot be joined with bytes.
This change has no effect for Python 2.
Ping-Bug: 15694
Change-Id: I2eb62698ce323f8156ed98b7fe88e4e43e59c784
Reviewed-on: https://code.wireshark.org/review/32843
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reorganize the lists of accessors, with a top-level heading for the byte
order and subheadings for each size.
Also document ENC_HOST_ENDIAN.
Change-Id: I10131e399f6c90624a387c89340f77ea769ab33f
Reviewed-on: https://code.wireshark.org/review/32701
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Inspired by looking into
https://ask.wireshark.org/question/8009/wireshark-ring-buffer-settings-from-command-line/
... in which the user was confused because a duration set on the command
line was not reflected in the GUI. That's because
I0180c43843f5d2f0c2f50153c9ce42ac7fa5aeae added the `interval` ring-buffer
option and made the GUI use this rather than `duration`. This was not at all
clear in the GUI, though.
Since `duration` and `interval` have quite different use cases, expose both in
the GUI.
Try to clean up and unify the tooltips at the same time. I'm not entirely
convinced the tooltips need to be on the checkbox, the spinbox, and the
combobox but leave it that way for now.
Add some to the man page description of the interval option to hopefully make
it clearer what the option does.
Change-Id: I3b45fe71c33af64d980dffb5e5ba93e2a15a6b96
Reviewed-on: https://code.wireshark.org/review/32526
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
They're a capture filter if you're capturing live traffic; they're a
display (read) filter if you're reading a capture file.
Change-Id: Ia2f5bcdb0098bf3c2b4a3d99da5bfe768e09b5a0
Reviewed-on: https://code.wireshark.org/review/32207
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Use the perpod syntax for manpages to remove this warning:
Cannot find "tail" in podpath: cannot find suitable replacement
path, cannot resolve link
Change-Id: I90cb4fe7d3b019e4bc5f5a8fbc7df347f966badb
Reviewed-on: https://code.wireshark.org/review/31770
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Option --extcap-interface=ssh seems to give an error, update it.
Note that --remote-capture-command overrides other options. Perhaps some
form of template should be supported, but that is currently not
implemented.
Change-Id: Iee132941a460afca91e73cf3e3ec3501dc15f14d
Reviewed-on: https://code.wireshark.org/review/31753
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Instead of just reporting a mismatching error code, include the program
output. This should help tracking down unexpected errors. While at it,
check the expected error message too.
Change-Id: Ib8fe51cc06b795bb54bfe1e6eaa828c6ba1128ef
Reviewed-on: https://code.wireshark.org/review/31714
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
For close to 10 years, we have defaulted not to stop processing on an
open error; default not to stop processing on a read error, either. -C
causes us to stop for both.
Bug: 15433
Change-Id: I5cd239c160d0ff85eb0425ca4b172532a4659fd3
Reviewed-on: https://code.wireshark.org/review/31710
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This function can convert non-string fields into strings. This allows the
user to apply string functions (like contains and matches) to non-string fields.
Examples:
string(frame.number) matches "[13579]$" => for odd frames
string(eth.dst) matches "aa\.bb\.cc\.dd\.ee\..." => to match a group of stations
string(snmp.name) matches "^1.2.3.4" => for all OIDs under a specific node
Change-Id: I18173f50ba5314ecdcd1e4b66c7e8ba5b44257ee
Reviewed-on: https://code.wireshark.org/review/31427
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Move doc/README.packaging to the Developer's Guide and update the
content.
Change-Id: I25fda6cade8f3cfd11af865745bedd0fb5a7c86f
Reviewed-on: https://code.wireshark.org/review/31474
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: If49baf3e2b4e01f4ca4ea85415a3a291f8c04c92
Reviewed-on: https://code.wireshark.org/review/31354
Petri-Dish: Jim Young <jim.young.ws@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
This allows taps that can fail to report an error and fail; a failed
tap's packet routine won't be called again, so they don't have to keep
track of whether they've failed themselves.
We make the return value from the packet routine an enum.
Don't have a separate type for the per-packet routine for "follow" taps;
they're expected to act like tap packet routines, so just use the type
for tap packet routines.
One tap packet routine returned -1; that's not a valid return value, and
wasn't one before this change (the return value was a boolean), so
presume the intent was "don't redraw".
Another tap routine's early return, without doing any work, returned
TRUE; this is presumably an error (no work done, no need to redraw), so
presumably it should be "don't redraw".
Clean up some white space while we're at it.
Change-Id: Ia7d2b717b2cace4b13c2b886e699aa4d79cc82c8
Reviewed-on: https://code.wireshark.org/review/31283
Reviewed-by: Guy Harris <guy@alum.mit.edu>
When generating a capture file from a text file it can be helpfull
to be able to set the capture interface name in the generated IDB.
This can be especially true if later on the generated captures are
merged and the individual IDB's have to be compared. Without a name
every IDB of the same datalink type will be equal and subject to
merge. Also it keeps the individual streams identifiable for the
end user.
Change-Id: I70224379d88f516a0a356bf0b46aebafb69665f0
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/31015
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
1) The default build configuration is to select PCAPNG as
output format, but it can be selected as PCAP. Some of the
command line tools have the option to select the output
format and default towards the build configuration.
This has to be reflected in their help output also.
2) Various documentation files are still stating that PCAP is
the default format of various tools. With the default build
configuration being PCAPNG these have to be adjusted as well.
(with lack of dynamic content the documentation can only refer
to the default build configuration format).
Change-Id: I51d19642a7ed8c99817971c1f25d20972095021e
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/30951
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
With the introduction of the ip command (from iproute2) on modern
Linux systems it becomes common to see this tool available,
gradually replacing tools like netstat and ifconfig.
Change-Id: I1fb309e741c07c93271b61a35c4833d36bcc5cb8
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/30924
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Various parts of the text2pcap documentation need some fixing up.
This change brings them back in line and up to date with current
features.
Change-Id: I038cf5c4943d2a4bbcc3d0fbd8f5e111dcf0d0a9
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/30754
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add a new option to insert decryption secrets into a pcapng file.
Change-Id: I0e024585cac9a8a328e88d32f9eb03d37d350e2a
Ping-Bug: 15252
Reviewed-on: https://code.wireshark.org/review/30693
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make sure the -i <pipe> documentation is consistent and correct.
Change-Id: I9019effb658f914ac754e4ae893eafbe7c4b4da1
Reviewed-on: https://code.wireshark.org/review/30675
Reviewed-by: Gerald Combs <gerald@wireshark.org>