Set focus to the discard button in the "Unsaved packet" and
"Unsaved comments" dialogs to enable spacebar for discard and
enter for save.
Bug: 13363
Change-Id: I576b02c4e3f0964aef56a0f1c06ed57c6ba683bf
Reviewed-on: https://code.wireshark.org/review/20485
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
The check*.pl scripts presume that files with the prefix "packet-"
are dissector files and therefore have different rules than other
files. Rather than trying to clarify that more with additional
directory information, just make any non-dissector file with
"packet-" filename prefix conform if it fails a "dissector specific"
check from the scripts.
Change-Id: I7cb52e1fad4ea62320492bb690904260f958aeb4
Reviewed-on: https://code.wireshark.org/review/19304
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
In the capture file dialog's "Files of type" combobox separate out the
wildcards we display from the ones that are applied. Set the
HideNameFilterDetails option and for "All Files" and "All Capture Files"
leave the option hidden.
For other options print the wildcard list twice so that it's both
displayed and applied. Go even further and filter out ".gz" wildcards in
the displayed list since they're effectively duplicates of their
uncompressed counterparts.
Based on Dario's work in change 17605.
Bug: 12837
Change-Id: I35de8f31492657e37b12ca4c8de5ed9e79d2e2f8
Reviewed-on: https://code.wireshark.org/review/17689
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Tried to poke various fields (including the capture filter field), this
revealed some memleaks.
Change-Id: I1eca431a09839906a4b3c902ad85e55bffc71ca8
Reviewed-on: https://code.wireshark.org/review/17648
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
We support reading some types of files that aren't capture files, in
case we have a dissector for that file format (because, for example,
it's often transported over HTTP). Don't include them in the set of
files "All Capture Files" matches; you can still look for them as they
have individual entries in the drop-down menu of file type patterns.
Ultimately, there should be Fileshark/TFileshark programs to read those
files - and other file types, and even capture files if the goal is to
look at the file structure rather than at the packets - and *that's* the
program that should offer the ability to load JPEGs and so on.
(No, this does not reduce the "All Capture Files" list down to a level
that makes the problem in bug 12837 go away. The right way to fix
*that* is to arrange, somehow, that the "All Capture Files" entry not
actually list all the suffixes it matches.)
Change-Id: I705bff5fcd0694c6c6a11892621a195aa7cd0264
Reviewed-on: https://code.wireshark.org/review/17619
Reviewed-by: Guy Harris <guy@alum.mit.edu>
A single name resolution checkbox was added to the file dialog way back
in 2000 in g0f7cf64. At that time it was needed because resolution was
synchronous and could drastically affect your load time. Since then
we've added asynchronous name resolution and more recently made it
mandatory (ge005bc8). We've also added more name resolution checkboxes
and other controls.
Remove the name resolution checkboxes. You can just as easily change
resolution options before or after opening a file and they take up
valuable real estate.
Combine the size and packets in the Qt and Win32 dialogs and
pretty-print the size. Combine the start and elapsed times in the Qt,
Win32, and GTK+ dialogs. This lets us shrink the custom areas of the
file dialogs even further. Make the default file type combo item more
descriptive.
Change-Id: Id770adc0f284a4c7f08ee5a7db84f8435f4bf907
Reviewed-on: https://code.wireshark.org/review/17597
Tested-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
That way each (CaptureFileDialog) user doesn't have to (remember to) check the
preference, etc., to figure out what directory to start in.
Change-Id: Ifa60e1ef9dbd11689a3f72906997cf3ed8ce259c
Reviewed-on: https://code.wireshark.org/review/14550
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
It's *.* on Windows, but just * on UN*X; add a header that provides the
definition, and use it instead of hardwiring *.*.
Call the entry "All Files", that being the conventional name, rather
than "Any File", whilst we're at it.
Change-Id: I7c29324fc5b41e93c150e1ec67f1529f171dc6a3
Reviewed-on: https://code.wireshark.org/review/14243
Reviewed-by: Guy Harris <guy@alum.mit.edu>
On Windows, the pattern that matches all files is *.*; *, by itself,
doesn't work, as I remember. UN*Xes take the pattern a bit more
literally, so if it has a dot in it, it has to match a dot.
Bug: 12203
Change-Id: I11518c29c4ffd73485bad6e49b6dd9cc16bbd0b0
Reviewed-on: https://code.wireshark.org/review/14233
Reviewed-by: Guy Harris <guy@alum.mit.edu>
When using QMessageBox with custom buttons, exec() function returns
an opaque value. Therefore we should use clickedButton() to determine
which button was clicked.
Example in https://wiki.qt.io/Custom_QMessageBox_Buttons
Change-Id: I81824414e31345bb9ea77f72f1b4cdeaa21d2781
Reviewed-on: https://code.wireshark.org/review/13523
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Fixed code layout to use common style in the file.
Mostly whitespace changes.
Change-Id: Id37b57717a9e26248fad07322dff09b1d1f45ac2
Reviewed-on: https://code.wireshark.org/review/13504
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This matches what the Windows file open dialog says, and also should
help prevent people thinking that it's a display filter, so that you can
clear it and see all the packets in the file.
I leave translations to native speakers.
Bug: 11708
Change-Id: I060816357bf7958d516429d09708a7ce16d609c5
Reviewed-on: https://code.wireshark.org/review/11877
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I460559c99c79c9fd40f284c750d64210fe5de50b
Reviewed-on: https://code.wireshark.org/review/10813
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Make sure ExportDissectionDialog is a non-native, funny-looking file
dialog so that we can fetch its layout.
Fix and add some URLs while we're here.
Bug: 11122
Change-Id: Icf62f7a436c7ba27ec20f84e7c1af1a5d7c9b949
Reviewed-on: https://code.wireshark.org/review/8479
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add PacketList::applyRecentColumnWidths which set the packet list
column widths from our recent settings. Make sure it gets called at
startup and when we change profiles.
Save the packet list header state so that we can restore it when we
reset the model (i.e. freezing and thawing) and load a new capture file.
Save the state when the user resizes a column. As a side effect this
works around a weird bug that adjusts the width of column 1 at an
inopportune time.
Add a profileChanging signal so that we can save the main window geometry
in each profile.
Get rid of MainWindow::configurationProfileChanged. It was unused.
Apply saved pane widths and heights. Note that we might want to add a
separate pair of recent settings for the Qt panes.
Use the last opened directory in the capture file dialog.
Git rid of some unneeded Q_UNUSEDs while we're here.
Bug: 10953
Change-Id: I812aff59818cf0b4d1598b580627d32728d2e9d7
Reviewed-on: https://code.wireshark.org/review/7247
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This reverts commit c0c480d08c.
A better way to do this is to have the record type be part of struct wtap_pkthdr; that keeps the metadata for the record together and requires fewer API changes. That is in-progress.
Change-Id: Ic558f163a48e2c6d0df7f55e81a35a5e24b53bc6
Reviewed-on: https://code.wireshark.org/review/1741
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This is the first step towards implementing the mechanisms requestd in
bug 8590; currently, we don't return any records other than packet
records from libwiretap, and just ignore non-packet records in the rest
of Wireshark, but this at least gets the ball rolling.
Change-Id: I34a45b54dd361f69fdad1a758d8ca4f42d67d574
Reviewed-on: https://code.wireshark.org/review/1736
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit 1abeb277f5.
This isn't building, and looks as if it requires significant work to fix.
Change-Id: I622b1bb243e353e874883a302ab419532b7601f2
Reviewed-on: https://code.wireshark.org/review/1568
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Start of refactoring Wiretap and breaking structures down into "generally useful fields for dissection" and "capture specific". Since this in intended as a "base" for Wiretap and Filetap, the "wft" prefix is used for "common" functionality.
The "architectural" changes can be found in cfile.h, wtap.h, wtap-int.h and (new file) wftap-int.h. Most of the other (painstaking) changes were really just the result of compiling those new architecture changes.
bug:9607
Change-Id: Ife858a61760d7a8a03be073546c0e7e582cab2ae
Reviewed-on: https://code.wireshark.org/review/1485
Reviewed-by: Michael Mann <mmann78@netscape.net>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change 16 / g579e7e1 introduced a breaking change in
capture_file_dialog.cpp on Windows. This works around the problem
temporarily until we come up with a proper fix.
Fix a Q_OS_WIN check while we're at it.
Change-Id: I552d60720e4a45c5144e0047ee3c1fcc7e64f4eb
Reviewed-on: https://code.wireshark.org/review/396
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The best heuristic can fail, so add possibility to manually choose
capture file format type, so not correctly recognize file format can be
loaded in Wireshark.
On the other side now it is possible to open capture file
as file format to be dissected.
Change-Id: I5a9f662b32ff7e042f753a92eaaa86c6e41f400a
Reviewed-on: https://code.wireshark.org/review/16
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Reviewed-by: Evan Huus <eapache@gmail.com>
Tested-by: Evan Huus <eapache@gmail.com>
Add menu items for each corresponding item in gtk/main_menubar.c that
calls gtk_stats_tree_cb(). Hopefully that's everything. Note that we use
quite a bit less code than the GTK+ flavor and why we might not want to
do that. Change a few things in ui/qt/CMakeLists.txt to more closely
match the GTK+ version. Add plumbing for tap registrations in
CMakeLists.txt and Makefile.am. Add the ability to copy text as CSV or
YAML.
svn path=/trunk/; revision=53464
subtypes, e.g. Network Monitor version 1 and Network Monitor version 2
are separate "file types", even though they both come from Network
Monitor.
Rename various functions, #defines, and variables appropriately.
svn path=/trunk/; revision=53166
.cap, for example, doesn't refer to a particular file type - a whole
bunch of file types use .cap.
Also offer, in addition to "All Files", "All Capture Files", which
matches all the extensions we know about.
svn path=/trunk/; revision=53156
Move the declaration of set_last_open_dir() to ui/util.h. It still
has separate GTK+ and Qt implemenations. We might want to move it to
ui/util.c at some point. Remove a lot of unnecessary GTK+ includes.
Remove most of the references to the global cfile while we're at it.
svn path=/trunk/; revision=52542
supports writing files with a given set of encapsulations and comment
types. Use it, rather than asking for a list of file formats that
support the given set of encapsulation and comment types and checking
whether we got back such a list, or duplicating its logic.
Having file.c use it means that nobody's using
wtap_dump_can_write_encaps() any more; get rid of it. Instead, have a
private routine that checks whether a given file format supports a given
set of encapsulations *and* comment types, and use that internally.
svn path=/trunk/; revision=48690
For each capture file type, have a bitset of comment types supported by
that capture file type.
Add a Wiretap routine that, for a given file type, returns the bitset of
comment types it supports.
Have wtap_get_savable_file_types() take a bitset of comment types that
need to be supported by the file types it returns.
Replace cf_has_comments() with a routine that returns a bitset of
capture file comment types in the capture file.
Use those routines in the capture file dialogs; don't wire in the notion
that pcap-NG supports all comment types and no other file formats
support any comment types. (That's currently true, but we don't want to
wire that in as being forever true.)
svn path=/trunk/; revision=48689
representations, and default status out of write_prefs and into their
own routines. Split the corresponding custom preference write callbacks.
Fix an apparent memory leak in the hidden column callback.
Add an initial preferences dialog to the Qt port. Use the new preference
routines to implement an "Adavanced" page similar to the "about:config"
page available in many web browsers. Standard pages will hopefully follow
soon.
Remove some QDebug includes and make sure our QTreeWidgets have uniform
row heights set.
svn path=/trunk/; revision=46942
Stig Bjørlykke