Convert some passthrough XML comments left over from the DocBook →
AsciiDoc conversion to AsciiDoc / Asciidoctor comments.
Change-Id: Iaf44bcf0b8a3a383e735b2b4394722cbbb2bdff3
Reviewed-on: https://code.wireshark.org/review/25615
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Switch from AsciiDoc's smart quotes markup to the quotes themselves. Use
double curly quotes in place of singles.
Switch from XML entities to their direct equivalents where we can.
Switch from hex entities to decimal entities where we can't or it's not
convenient. (Asciidoctor PDF doesn't yet handle hex entities).
Change-Id: Iaf5ec33249e1c91b3d50b5d96251763243b72836
Reviewed-on: https://code.wireshark.org/review/25606
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Start using markup that is preferred by Asciidoctor but compatible with
both generators.
Add a missing "cpp" attribute and set a couple of Asciidoctor-specific
compatibility attributes.
Change-Id: Iff4c31362e4493b97a85f46db2c39b18c336536f
Reviewed-on: https://code.wireshark.org/review/25600
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Adding Session Multiplex Protocol SMP
SMP is used by TDS when MARS in enabled.
Bug: 14110
Change-Id: Ia4113c627d107da6c3d51e4004265efb228a297b
Reviewed-on: https://code.wireshark.org/review/25509
Reviewed-by: Craig Jackson <cejackson51@gmail.com>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I306341c7cddf8facb4a9ca62254a465a1da22174
Reviewed-on: https://code.wireshark.org/review/25423
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I049c8b9b9a0a1da2243217532186ba5a19cf5671
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/25424
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Generate a single PA4-sized PDF. PA4 is the approximate intersection of
A4 and Letter[1]. This gives us one less file to build and distribute.
If you're printing out hard copies of the guides this wastes a few pages
compared to an A4-sized PDF, but if you're printing out hard copies of
the guides you've already made a strong commitment to waste paper.
Page counts:
Guide Size Pages
WSDG A4 203
WSDG Letter 217
WSDG PA4 217
WSUG A4 192
WSUG Letter 204
WSUG PA4 205
[1] https://en.wikipedia.org/wiki/Paper_size#PA4_or_L4
Change-Id: If43d4b19947c77a51b3943a2b329dbab45025d79
Reviewed-on: https://code.wireshark.org/review/25438
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Codecs in general come in many flavours, G.729 non in the least.
Be accurate about what codec implementation is actually provided.
Change-Id: I372062906bef973c8e19b63e5296574780d8a89e
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/25388
Reviewed-by: Michael Mann <mmann78@netscape.net>
ASN.1 prose imported from the specification and heavily modified
manually to workaround its poor quality.
Some of them are marked with -- WS modification comment, some are not.
Probably useless as-is, but it is an initial start until an updated
version is available.
Change-Id: I19ab6cedb6aa23c8ed57bae525ee4a3391494e32
Reviewed-on: https://code.wireshark.org/review/25235
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This interperates the main body of Lustre traffic.
This dissects all current Lustre OPCODES (as of Lustre 2.10.2)
This dissects MDS REINT sub-opcodes
This dissects LDLM Intent opcodes
This dissects LLOG EADATA
Conversation matching is just IP based and not IP/port based.
Only one lustre "instance" can be running on a given host at a given time,
and request / reply pairs aren't don't always match by port numbers.
Add exception for lustre_* structure names in PROTOABBREV.
We have several lustre.lustre_* because the internal lustre structre is
named lustre_ (i.e. lustre_handle or lustre_msg_v2)
This is still a work in progress, as there are missing FLAG values
and some LLOG EADATA structures that aren't fully decoded.
Change-Id: If57085e2692565336e49f40fb475ca1035da7a35
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-on: https://code.wireshark.org/review/24800
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
At one point, I remember a discussion resulting in the official name of
the next-generation replacement for pcap format being changed to
"pcapng", with no hyphen.
Make Wireshark reflect that.
Change-Id: Ie66fb13a0fe3a8682143106dab601952e9154e2a
Reviewed-on: https://code.wireshark.org/review/25214
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Use SetConsoleTextAttribute to reset our colors on Windows. Update the
release notes and man page.
Change-Id: I2bc309787f9c2331324503092bd1c9ae6360eb55
Reviewed-on: https://code.wireshark.org/review/25170
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I360bc4f802e28e9fc64cbd5cc06e514cbaf3b25f
Reviewed-on: https://code.wireshark.org/review/25091
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Two Edit->Copy methods are using the same keyboard shortcut as other
functionality:
1. Ctrl+Shift+D is used for "Copy this item's description" and
"Ignore All Displayed packets"
2. Ctrl+Shift+F is used for "Copy this item's field name" and
"Reload as File Format/Capture"
Resolve this by changing the Copy methods to use Ctrl+Alt+Shift as modifier.
Add a keyboard shortcut for "Copy all visible items" while here.
Change-Id: I0d963501055e63963d93e211f592aa9e82801d3c
Reviewed-on: https://code.wireshark.org/review/24884
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Micro version bump for mate to homogenize it between CMake and autotools.
The cmake macro doesn't handle the "a" suffix and it doesn't seem worth
implementing.
Change-Id: Ib022c6aa170623b83a9700e4fa098c60a9cddfab
Reviewed-on: https://code.wireshark.org/review/24847
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
plugin.rc is Windows specific, also add condition to reflect that.
Change-Id: Ibbb7dab77dd1f277e2302c8f931218ca433f8c72
Reviewed-on: https://code.wireshark.org/review/24833
Reviewed-by: João Valverde <j@v6e.pt>
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Qt 5.4 introduced qUtf8Printable, a convenience macro for converting
QString to a UTF-8 const char *. Add a compatibility definition and
start using it.
Change-Id: I3cf88611b1ed1a34082cb2ba82394954e2e6c461
Reviewed-on: https://code.wireshark.org/review/24828
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Put different types of plugins (libwiretap, libwireshark) in different
subdirectories, give libwiretap and libwireshark init routines that
load the plugins, and have them scan the appropriate subdirectories
so that we don't even *try* to, for example, load libwireshark plugins
in programs that only use libwiretap.
Compiled plugins are stored in subfolders of the plugin folders, with
the subfolder name being the Wireshark minor version number (X.Y). There is
another hierarchical level for each Wireshark library (libwireshark, libwscodecs
and libwiretap).
The folder names are respectively plugins/X.Y/{epan,codecs,wiretap}.
Currently we only distribute "epan" (libwireshark) plugins.
Change-Id: I3438787a6f45820d64ba4ca91cbe3c8864708acb
Reviewed-on: https://code.wireshark.org/review/23983
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
So far decode just packet headers
Change-Id: I7a01f3c83b97882f4c669122ad94b2bdab0ab251
Signed-off-by: Pavel Moravec <pmoravec@redhat.com>
Reviewed-on: https://code.wireshark.org/review/24583
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Instead of blurring the main welcome screen during startup, draw a dark
band under the progress bar. This reduces the startup time a bit here.
Port over a date check from the GTK+ UI.
Change-Id: I997d0fd2e4320702fe85ee2aea02ce835a423df9
Reviewed-on: https://code.wireshark.org/review/24711
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Bug: 9553
Change-Id: I19505c3c05585a05877e9f0db06400ebb8b33985
Reviewed-on: https://code.wireshark.org/review/24585
Reviewed-by: Michael Mann <mmann78@netscape.net>
Make ASCIIDOC and XSLTPROC packages required if building any of
the HTML, PDF or CHM guides.
Don't attempt to build the release notes if ASCIIDOC isn't found.
Change-Id: Id61653a635f91cbaffa32fb26ddbdbc568b74528
Reviewed-on: https://code.wireshark.org/review/24483
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Created an AdminDeployment.xml file for use with the chocolatey
package for VS2015 Community Edition and updated the WSDG to
include it.
Bug: 14147
Change-Id: Id2a701067bf38874cf0bf534cca55dba9cfd30d4
Reviewed-on: https://code.wireshark.org/review/24464
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Avoid printing a noisy "option requires an argument" error when using
'-T' and '-F' as documented. Fix warning that started showing on macOS
with CMake 3.9.4 about CMP0058 since v2.5.0rc0-1180-g799f4f0e14.
Change-Id: Ie0cc352c6b0b2724997e7fe6b49fd5b1f02d1e07
Reviewed-on: https://code.wireshark.org/review/24404
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Ahmad Fatoum <ahmad@a3f.at>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
sort-and-group produces a comma-separated list, the last two entries are
separated by "and"
Change-Id: I3e6c153c764641664453c4d091fdb84bb308e689
Reviewed-on: https://code.wireshark.org/review/24366
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Replace the GPLv2+ blurbs in the doc and docbook directories with SPDX
headers as appropriate. This includes example code such as
packet-PROTOABBREV.c.
Remove dfilter2pod.pl and dfilter2xml.pl. We haven't used them since
2010.
Change-Id: I4adec02a9a4bc3e71e32bdf89f2754edaf696938
Reviewed-on: https://code.wireshark.org/review/24343
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Bug: 14152
Change-Id: If1d89afd5dbf62adae4cd84e3fc44bd37a8a2176
Reviewed-on: https://code.wireshark.org/review/24221
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I94da228cba6baf20a2cd02bafc9704492f2cfc9f
Reviewed-on: https://code.wireshark.org/review/23956
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Richard Sharpe <realrichardsharpe@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Installs the WSUG to $docdir, unless the --disable-guides option is given
to the configure script.
This will open the Help->Contents menu action using the locally installed
guide. It will also point to the correct version for this Wireshark release.
The wireshark.org link only provides the guide for the master branch.
Change-Id: I9dd539c737cb3777dc1351707b9e45a3a6764aaa
Reviewed-on: https://code.wireshark.org/review/23906
Petri-Dish: João Valverde <j@v6e.pt>
Reviewed-by: João Valverde <j@v6e.pt>
Tested-by: João Valverde <j@v6e.pt>
Reviewed-by: Michael Mann <mmann78@netscape.net>
1. Protobuf dissector supports the almost all basic protobuf types of
varint, sint, string, and so on.
2. Protobuf messages are not self-described protocol, for example,
varint in protobuf may be int32, int64, uint32, uint64, sint32,
sint64, bool or enum. Currently dissector will dissect field without
detail definition in common way, for numeric field it show uint32 or
uint64, for length-delimited field it just show as bytes. But user
turn the try_dissect_all_length_delimited_field_as_string or
show_all_possible_field_types options on, that dissect will show all
possible value for each field according to wire type. (for example,
a numeric field will parsed in int32, uint32, sint32, sint64 and so
on).
Ping-Bug: 13932
Change-Id: Idfe49307b1c84fe461603756f75daeb3e410a905
Reviewed-on: https://code.wireshark.org/review/23814
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Rename osx-app.sh to osx-app.sh.in and add the version to the plugin
path at configure time.
Instead up updating Autotools accordingly just remove the macOS
packaging targets. gf61c381b5a removed support for Autotools in
osx-app.sh and if anyone wants to build macOS packages I'd prefer that
they use the same toolchain as the buildbot.
Change-Id: Ide5205265bf8859a85b1afab68fa8f8285952bd3
Reviewed-on: https://code.wireshark.org/review/23839
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Adds support for the SolarEdge inverter monitoring protocol. Based on the work
done by https://github.com/jbuehl/solaredge
bug: 14079
Change-Id: Ia0102c057e4cd27c187b01c7fd28053678f22727
Reviewed-on: https://code.wireshark.org/review/23653
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Print the SHA256, RIPEMD160, and SHA1 hashes for each file instead of
SHA1, RIPEMD160, and MD5. SHA256 seems to be the preferred file hashing
algorithm these days and MD5 is actively discouraged. Note that we might
remove SHA1 (which is also discouraged) as well.
Change-Id: I74d972ae5f3484c83175cd3f3c7a55f99c171e20
Reviewed-on: https://code.wireshark.org/review/23761
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Gerald Combs