multiple NetBIOS-over-TCP session service messages in a TCP segment, and
they can contain the final portions of different DCERPC calls. Don't
assume a frame number is sufficient to identify DCE RPC calls.
svn path=/trunk/; revision=7777
null) to the "fragment_items" structure, and don't pass that value into
"process_reassembled_data()", just have it use the value in the
"fragment_items" structure passed to it.
Make "process_reassembled_data()" capable of handling reassembly done by
"fragment_add_seq_check()", and use it in the ATP and 802.11 dissectors;
give them "reassembled_in" fields. Make "process_reassembled_data()"
handle only the case of a completed reassembly (fd_head != NULL) so that
we can use it in those dissectors without gunking the code up too much.
svn path=/trunk/; revision=7513
reassembly. (Perhaps we *shouldn't* see reassembly in progress in both
directions, if the protocol is purely request/response, but that doesn't
mean you won't see it in a capture, due to bugs or dropped packets
or....)
svn path=/trunk/; revision=7457
the call to initialize it; move the call to initialize it to the
registration routine for the dissector that uses it, move the definition
of ""dcerpc_fragment_table" to packet-smb-pipe.c, make it static, and
remove the declaration of it from smb.h.
Add some casts to squelch compiler complaints.
svn path=/trunk/; revision=7449
when doing reassembly.
In some additional places, use "tvb_bytes_exist()" to check whether we
have enough data to do reassembly, rather than checking to see if the
frame is short (it might be short but we might still have enough data to
do reassembly).
In DCE RPC, use the fragment length from the header as the number of
bytes of fragment data.
There's no need to check "pinfo->fragmented" before doing reassembly in
the DCERPC-over-SMB-pipes code - either we have all the data or we
don't.
In SNA and WTP reassembly, add a check to make sure we have all the data
to be reassembled.
svn path=/trunk/; revision=7282
not guaranteed to be aligned on a 4-byte boundary, so, if we're not
dissecting a DCE RPC request or reply, don't use "dissect_ndr_uint32()"
to extract the access mask.
svn path=/trunk/; revision=7175
descriptor of the matching request is missing, e.g. because the frame
was too short but not so sort that the entire request was missing.
Clean up the handling of the case where the parameter descriptor isn't
missing but the data descriptor was.
If we can't dissect the response data due to a missing descriptor,
at least create *some* item for the data.
svn path=/trunk/; revision=6645
sequence numbers or offsets and are thus assumed to be received in order
with no duplicates or dropped fragments (e.g., for NetBIOS Frame, where
802.2 LLC guarantees in-order delivery to NetBIOS with no duplicates or
dropped fragments).
"show_fragment_tree()' and "show_fragment_seq_tree()" don't modify the
"fragment_items" to which the "fit" argument points, so make that
argument a "const fragment_items *".
Make all the "fragment_items" tables "static" (as they're not used
outside the modules defining them) and "const" (as they're not
modified).
Add support for reassembly of NetBIOS fragmented requests and responses.
Get rid of an unnecessary include of "packet-tr.c" in the NetBIOS
dissector, and make its table of dissection function pointers static.
Fix some typos in the AppleTalk and NetBIOS dissectors.
svn path=/trunk/; revision=6491
equivalents for the toplevel directory. The removal of winsock2.h will
hopefully not cause any problems under MSVC++, as those files using
struct timeval still include wtap.h, which still includes winsock2.h.
svn path=/trunk/; revision=5932
but for stuff reassembled with "fragment_add_seq()" or
"fragment_add_seq_check()".
Add a "fragment tag" string to the "fragment_items", so that packets
with fragmentation errors can be properly flagged as having "Illegal
fragments" or "Illegal segments" depending on the term used with the
protocol in question.
Make all the dissectors that can use "show_fragment_tree()" or
"show_fragment_seq_tree()", and don't already use them, do so.
svn path=/trunk/; revision=5644
in the "packet_info" structure instead, as we don't need a pointer for
every single frame in the capture file, just for each frame for which we
currently have an open "epan_dissect_t".
svn path=/trunk/; revision=5614
Remove the declaration of "dissect_nt_sid()" from
"packet-dcerpc-samr.c"; get it by including "packet-smb-common.h",
instead.
svn path=/trunk/; revision=5313
top-level item correspond to the reassembled data, and make the item for
each fragment/segment correspond to the part of that reassembled data
that came from that fragment/segment.
svn path=/trunk/; revision=5025
I have captures with w2k speaking DCERPC without using the normal
Transaction named pipes SMBs.
Instead DCERPC is just implemented ontop of ordinary read/write calls.
The smb dissector now examines TreeConnectAndX and stores the conversation/tid/type-of-share in a table for later access.
All SMB requests examine that hash table to find out if TID in the header refers
to a normal share or an IPC$ share.
Initial support in read/write SMB calls to detect if the operations are for an
IPC share and thus it assumes it must be DCERPC commands in the payload.
Desegmentation/Reassembly of these types of calls are not implemented yet.
svn path=/trunk/; revision=4952
"data source" has a name and a top-level tvbuff, and frames can have a
list of data sources associated with them.
Use the tvbuff pointer to determine which data source is the data source
for a given field; this means we don't have to worry about multiple data
sources with the same name - the only thing the name does is label the
notebook tab for the display of the data source, and label the hex dump
of the data source in print/Tethereal output.
Clean up a bunch of things discovered in the process of doing the above.
svn path=/trunk/; revision=4749
support for the "b" descriptor item in data, for pointers that point to
arrays of bytes - the descriptor item includes a byte count giving the
number of bytes in the array.
Handle the "logon hours" bitmask in that fashion.
Sometimes it appears that -1 means "unknown", and sometimes it appears
that 0 means "unknown", for the last logoff date/time; interpret both of
them as "unknown" (or "never").
svn path=/trunk/; revision=4612
wrong type.
Don't have routines that create subtrees for the data in a RAP reply -
just have a string for the name to give the subtree. Create the subtree
iff the reply has an entry count; if there's no name, use "Entries", and
if there's no ett_ value for it, use a generic one.
If there's no routine to create a subtreee for an entry in a RAP reply,
don't create the subtree - some entries have only one member, so there's
no point in creating a subtree for them. Provide an ett_ value to use
if we don't know what the entry looks like.
Properly terminate "lm_null_list[]".
Fix the tables for the NetUserGetInfo API.
Add tables for the NetUserGetGroups API.
Add #defines and names for all the APIs in the SNIA CIFS spec (but fix
up some of the names to reflect what the actual API names appear to be).
Display the RAP API number in decimal, not hex, for unknown APIs.
Use the right hf_ value when displaying the auxiliary data descriptor.
svn path=/trunk/; revision=4611
"epan/..." pathnames, so as to avoid collisions with header files in any
of the directories in which we look (e.g., "proto.h", as some other
package has its own "proto.h" file which it installs in the top-level
include directory).
Don't add "-I" flags to search "epan", as that's no longer necessary
(and we want includes of "epan" headers to fail if the "epan/" is left
out, so that we don't re-introduce includes lacking "epan/").
svn path=/trunk/; revision=4586
items to the protocol tree; it's interpreted as "the rest of the data in
the tvbuff". This can be used if
1) the item covers the entire packet or the remaining payload in
the packet
or
2) the item's length won't be known until it's dissected, and
will be then set with "proto_item_set_len()" - if an
exception is thrown in the dissection, it means the item ran
*past* the end of the tvbuff, so saying it runs to the end of
the tvbuff is reasonable.
Convert a number of "proto_tree_add_XXX()" calls using
"tvb_length_remaining()", values derived from the result of
"tvb_length()", or 0 (in the case of items whose length is unknown) to
use -1 instead (using 0 means that if an exception is thrown, selecting
the item highlights nothing; using -1 means it highlights all the data
for that item that's available).
In some places where "tvb_length()" or "tvb_length_remaining()" was used
to determine how large a packet is, use "tvb_reported_length()" or
"tvb_reported_length_remaining()", instead - the first two calls
indicate how much captured data was in the packet, the latter two calls
indicate how large the packet actually was (and the fact that using the
latter could cause BoundsError exceptions to be thrown is a feature - if
such an exception is thrown, the frame really *was* short, and it should
be tagged as such).
Replace some "proto_tree_add_XXX()" calls with equivalent
"proto_tree_add_item()" calls.
Fix some indentation.
svn path=/trunk/; revision=4578
"dissect_frame()" to indicate whether a ReportedBoundsError was due to
the packet being malformed (i.e., the packet was shorter than it's
supposed to be, so the dissector went past the end trying to extract
fields that were supposed to be there) or due to it not being
reassembled (i.e., the packet was fragmented, and we didn't reassemble
it, but just treated the first fragment as the entire packet, so the
dissector went past the end trying to extract fields that were partially
or completely in fragments after that). Mark the latter as being
unreasembled rather than malformed.
Properly initialize, save, and restore that field, and properly set it,
so that works.
svn path=/trunk/; revision=4555
the beginning, and to use underscores rather than periods where the
preference's name really isn't part of a hierarchical namespace.
Use "%u" rather than "%d" to print unsigned quantities.
svn path=/trunk/; revision=4543
structure to the "packet_info" structure; only stuff that's permanently
stored with each frame should be in the "frame_data" structure, and the
"column_info" structure is not guaranteed to hold the column values for
that frame at all times - it was only in the "frame_data" structure so
that it could be passed to dissectors, and, as all dissectors are now
passed a pointer to a "packet_info" structure, it could just as well be
put in the "packet_info" structure.
That saves memory, by shrinking the "frame_data" structure (there's one
of those per frame), and also lets us clean up the code a bit.
svn path=/trunk/; revision=4370
"smb_saved_info_t" in the table of requests whose replies have been
found, don't look it up in the table of requests whose replies have not
been found - if the request in question has no reply in the capture,
that may find some later frame in the same conversation with the same
MID, and we don't need that information anyway - the only reason we
*need* that structure is to save information in it for use when
processing its reply, and we already did that the first time we
processed the request. (The information for the later frame may be bad,
e.g. having a null "extra_info" pointer, or having one that points to
information for another request.)
Arrange that we don't use the pointer to the "smb_saved_info_t" when
processing a request except to save information if the request hasn't
already been processed, as that pointer may not be valid if the request
has already been processed, as per the above.
svn path=/trunk/; revision=4292
Add some checks for null tvbuff arguments.
When dissecting transaction setup, parameters, and data when we couldn't
dissect it as a pipe or mailslot transaction, use the reported length of
the supplied tvbuff, not the actual length, as the amount of data
present.
svn path=/trunk/; revision=4291
indicate that it's to be used for SMB transactions; a different table,
using different dissectors, would be needed for, say, reads and writes
over a named pipe, as those are byte streams and SMB transactions are
packets, so the dissectors for the first one need to worry about
multiple PDUs per segment and desegmentation, while the dissectors for
the second one don't - and, in fact, can't do desegmentation stuff.
svn path=/trunk/; revision=4286
if (and only if) the length of the item being added is 0 (so that it has
no data backing it).
This means the data stream name pointer for the item in question is
null; make sure we handle that.
Use that for some "uses the value from the matching request" fields in
the SMB Pipe protocol.
svn path=/trunk/; revision=4231
routines used for that.
Rename some named pipe functions as per the SNIA CIFS spec.
Label the "number of files moved" field of the reply to a Move SMB as
such, rather than as an unspecified "Count".
svn path=/trunk/; revision=4229
obviates the need to have a protocol tree item for "MSRPC-over-SMB", as
the setup words for it are just standard TransactNmPipe setup words
(0x26 is the TransactNmPipe function code, and the next setup word is
the FID for the pipe in question.)
Pass to the pipe dissector tvbuffs for setup-words-plus-pipe (which is
the data for the pipe protocol) and parameters-plus-data (which is the
data for the protocol running atop the pipe protocol); use the former
for the top-level protocol tree item for the pipe protocol, and the
latter for the top-level protocol tree item for the LANMAN protocol.
svn path=/trunk/; revision=4223
mailslot-based logon protocols just be regular register routines,
detected by the script that generates the "register.c" file, rather than
special stuff known to the SMB dissector.
svn path=/trunk/; revision=4222