Extract the FCS decoding section of the PPP_HDLC dissector to
allow the CHDLC dissector to use the same routine.
The ppp_options used for preferences has been renamed to
fcs_options and exported via packet-ppp.h so CHDLC gets a
separate (but identical) FCS preference.
This means prefs.h has to be included before packet-ppp.h so a
couple of ppp related files (packet-{gtp,null,raw,vj}.c) had
their includes slightly re-arranged.
From me: make the PPP/CHDLC FCS code use "crc32()" to check the 32-bit
FCS.
svn path=/trunk/; revision=8266
Supported types are Ethernet/TokenRing/IP/UDP and TCP.
Will add FibreChannel soon.
The framework for this feature needs to be enhanced in the future so that by selecting one entry and click the right mousebutton, this will bring up a menu with Prepare/Match options with suboptions for AnyDirection, ForwardOnly or ReverseOnly which updates the display filter accordingly.
Had to update some of the taps as well to change them to use a proper address structure for the address fields.
We should now be able to to these stats correctly even for ip tunneled over ip tunnelled over ip ...
svn path=/trunk/; revision=8222
An Ethernet trailer is only needed to pad the packet to 60 bytes of
Ethernet header plus payload; if the packet has what appears to be a
trailer, and it's 4 or more bytes (i.e., long enough to include an FCS),
and the Ethernet frame was claimed to have 64 or more bytes (i.e., it
has at least an FCS worth of data more than the minimum 60 bytes),
assume that the last 4 bytes of the frame were an FCS.
svn path=/trunk/; revision=8207
- A new decoder called MDSHDR which decodes the internal header of the
Cisco MDS switch (this is different from the Boardwalk header).
- Support for some more new columns as part of FC support.
- Fixed the decoding of the Special Frame in FCIP.
- Fixed the decoding of credit management type field in FLOGI/PLOGI frame
in FC-ELS.
svn path=/trunk/; revision=6974
Put "bytes" after the byte counts for the frame sizes in the
top-level item for the "Frame" protocol, to make it clearer
what they refer to.
Put the source and destination MAC addresses into the top-level
item for Ethernet.
svn path=/trunk/; revision=6090
equivalents for the toplevel directory. The removal of winsock2.h will
hopefully not cause any problems under MSVC++, as those files using
struct timeval still include wtap.h, which still includes winsock2.h.
svn path=/trunk/; revision=5932
"epan/..." pathnames, so as to avoid collisions with header files in any
of the directories in which we look (e.g., "proto.h", as some other
package has its own "proto.h" file which it installs in the top-level
include directory).
Don't add "-I" flags to search "epan", as that's no longer necessary
(and we want includes of "epan" headers to fail if the "epan/" is left
out, so that we don't re-introduce includes lacking "epan/").
svn path=/trunk/; revision=4586
structure to the "packet_info" structure; only stuff that's permanently
stored with each frame should be in the "frame_data" structure, and the
"column_info" structure is not guaranteed to hold the column values for
that frame at all times - it was only in the "frame_data" structure so
that it could be passed to dissectors, and, as all dissectors are now
passed a pointer to a "packet_info" structure, it could just as well be
put in the "packet_info" structure.
That saves memory, by shrinking the "frame_data" structure (there's one
of those per frame), and also lets us clean up the code a bit.
svn path=/trunk/; revision=4370
take a dissector handle as an argument, rather than a pointer to a
dissector function and a protocol ID. Associate dissector handles with
dissector table entries.
svn path=/trunk/; revision=4308
of packet data captured.
Make the "BYTES_ARE_IN_FRAME()" macro take a "captured length of the
packet" argument.
Add some length checks to capture routines.
svn path=/trunk/; revision=4235
apparently, means an Ethernet packet is stuffed into the payload; add
support for it as an Ethernet, Cisco HDLC, and GRE packet type.
Sort the Ethernet types in "etypes.h" by value.
svn path=/trunk/; revision=3250
length field rather than an Ethernet type field) into a
"dissect_802_3()" routine.
In that routine, catch exceptions thrown by the IPX or LLC dissector or
dissectors under them, so that the trailer information is added to the
tree even if an exception is thrown (similar to what "ethertype()"
does).
svn path=/trunk/; revision=3002
"pinfo->current_proto"; dissectors called only through dissector tables
and handles don't need to do either of those, as the dissector table and
handle code will do it for them. (Dissectors called directly, or
dissectors that can be attached to conversations, still have to do it
themselves.)
Register the PPP Multilink Protocol, PPP Link Control Protocol, and PPP
IP Control Protocol as official protocols, and register them in PPP's
dissector table rather than having PPP handle them specially; change
"dissect_cp()" to take a protocol ID, get the protocol short name
information from it, and use the protocol ID for the top-level protocol
tree item.
Set the Protocol column in the PPP Multilink Protocol dissector, and set
the Info column before extracting anything from the frame, so that if an
exception is thrown, the Info and Protocol columns will reflect that the
packet is supposed to be a PPP Multilink Protocol frame.
Make the "First fragment" and "Last fragment" flags in the PPP Multilink
Protocol header boolean bitfields, and let "proto_tree_add_boolean()" do
all the heavy lifting when displaying them, rather than doing it by
hand.
Don't extract the sequence number in the PPP Multilink Protocol until
you're ready to put it into the tree, just in case the captured packet
includes the flags but not the sequence number.
Clean up the code to check the FCS of PPP frames - extract it with
"tvb_get_letohs()" or "tvb_get_letohl()", don't extract it byte-by-byte
and then put it together yourself.
svn path=/trunk/; revision=2926
"{old_}heur_dissector_add()", "{old_}conv_dissector_add()", and
"register_dissector()", so that an entry in those tables has associated
with it the protocol index of the protocol the dissector handles (or -1,
if there is no protocol index for it).
This is for future use in a number of places.
(Arguably, "proto_register_protocol()" should take a dissector pointer
as an argument, but
1) it'd have to handle both regular and heuristic dissectors;
2) making it take either a "dissector_t" or a union of that and
a "heur_dissector_t" introduces some painful header-file
interdependencies
so I'm punting on that for now. As with other Ethereal internal APIs,
these APIs are subject to change in the future, at least until Ethereal
1.0 comes out....)
svn path=/trunk/; revision=2849
protocols, in addition to adding structures to the list of filterable
fields. Give it an extra argument that specifies a "short name" for the
protocol, for use in such places as
pinfo->current_proto;
the dialog box for constructing filters;
the preferences tab for the protocol;
and so on (although we're not yet using it in all those places).
Make the preference name that appears in the preferences file and the
command line for the DIAMETER protocol "diameter", not "Diameter"; the
convention is that the name in question be all-lower-case.
Make some routines and variables that aren't exported static.
Update a comment in the ICP dissector to make it clear that the
dissector won't see fragments other than the first fragment of a
fragmented datagram.
svn path=/trunk/; revision=2810
Add a new subdissector table in the LLC dissector for protocol IDs with
a Cisco OUI, and register the CDP, CGMP, and VTMP dissectors in that
table, rather than calling them via a switch statement.
Register the ISL dissector by name, and have the Ethernet dissector call
it via a handle.
Fix the handling of the checksum field in the CDP dissector.
The strings in CDP are counted, not null-terminated; treat them as such.
Fix the handling of the encapsulated frame CRC, and the encapsulated
frame, in the ISL dissector, at least for Ethernet frames; it may not be
correct for encapsulated Token Ring frames.
svn path=/trunk/; revision=2792
dissect_fddi_not_bitswapped() and dissect_fddi_bitswapped(), both of which
use the standard 3-argument tvbuffified-dissector argument list.
Add a dissector table called "wtap_encap" which is used to call dissectors
from dissect_frame(). The switch() statement from this top-level dissector
is removed.
The link-layer dissectors register themselves with the "wtap_encap"
dissector table. The dissectors are now static where possible.
svn path=/trunk/; revision=2708
can be put, and a pointer to the string for the column, which might or
might not point to that buffer.
Add a routine "col_set_str()", which sets the string for the column to
the string passed to it as an argument; it should only be handed a
static string (a string constant would be ideal). It doesn't do any
copying, so it's faster than "col_add_str()".
Make the routines that append to columns check whether the pointer to
the string for the column points to the buffer for the column and, if
not, copy the string for the column to the buffer for the column so that
you can append to it (so you can use "col_set_str()" and then use
"col_append_str()" or "col_append_fstr()").
Convert a bunch of "col_add_str()" calls that take a string constant as
an argument to "col_set_str()" calls.
Convert some "col_add_fstr()" calls that take a string constant as the
only argument - i.e., the format string doesn't have any "%" slots into
which to put strings for subsequent arguments to "col_set_str()" calls
(those calls are just like "col_add_str()" calls).
Replace an END_OF_FRAME reference in a tvbuffified dissector with a
"tvb_length(tvb)" call.
svn path=/trunk/; revision=2670
other dissectors call them through handles. Do the same for the "PPP
payload" dissector, after tvbuffifying it.
Tvbuffify the PPPoE dissector.
Do the last little bit of tvbuffifying the L2TP dissector (it takes
old-style arguments and immediately generates a tvbuff out of them; make
it take new-style arguments).
svn path=/trunk/; revision=2664
ESIS dissectors.
Register the IP dissector and have dissectors that call it directly
(rather than through a port table) call it through a handle.
Add a routine "tvb_set_reported_length()" which a dissector can use if
it was handed a tvbuff that contains more data than is actually in its
part of the packet - for example, handing a padded Ethernet frame to IP;
the routine sets the reported length of the tvbuff (and also adjusts the
actual length, as appropriate). Then use it in IP.
Given that, "ethertype()" can determine how much of the Ethernet frame
was actually part of an IP datagram (and can do the same for other
protocols under Ethernet that use "tvb_set_reported_length()"; have it
return the actual length, and have "dissect_eth()" and "dissect_vlan()"
use that to mark trailer data in Ethernet II frames as well as in 802.3
frames.
svn path=/trunk/; revision=2658
we don't have so much data in the frame that there's a trailer, so we
should set "trailer_tvb" to NULL.
Put in a comment explaining what the exception catching is all about.
svn path=/trunk/; revision=2633
'tvbuff_t *volatile'." Makes "Throat-Warbler Mangrove" vs.
"Luxury-Yacht" sound almost normal....
Type-qualified pointers to non-type-qualified objects are a barrel of
fun in C. The way you declare a volatile pointer named "bar" to a
*non-volatile* "foo" is
foo *volatile bar;
as opposed to a non-volatile pointer "bar" to a volatile "foo", which is
volatile foo *bar;
GCC's complaint about variables being clobbered by longjmp refers to the
fact that "longjmp()" isn't guaranteed to restore variables stored in
registers to the values they had at the time of the "longjmp()" (if
"setjmp()" stuffs the current register values in the "jmp_buf", and
"longjmp()" just reloads them rather than walking the stack to restore
all register values pushed onto the stack, the values at the time of the
"setjmp()" will be restored, clobbering any updates done after the
"setjmp()"); the workaround provided in ANSI C is to declare the
variables in question "volatile", which will keep them out of registers
(or any other place that "setjmp()"/"longjmp()" can't handle).
svn path=/trunk/; revision=2631
the following:
It is now possible to enable/disable a particular protocol decoding
(i.e. the protocol dissector is void or not). When a protocol
is disabled, it is displayed as Data and of course, all linked
sub-protocols are disabled as well.
Disabling a protocol could be interesting:
- in case of buggy dissectors
- in case of wrong heuristics
- for performance reasons
- to decode the data as another protocol (TODO)
Currently (if I am not wrong), all dissectors but NFS can be disabled
(and dissectors that do not register protocols :-)
I do not like the way the RPC sub-dissectors are disabled (in the
sub-dissectors) since this could be done in the RPC dissector itself,
knowing the sub-protocol hfinfo entry (this is why, I've not modified
the NFS one yet).
Two functions are added in proto.c :
gboolean proto_is_protocol_enabled(int n);
void proto_set_decoding(int n, gboolean enabled);
and two MACROs which can be used in dissectors:
OLD_CHECK_DISPLAY_AS_DATA(index, pd, offset, fd, tree)
CHECK_DISPLAY_AS_DATA(index, tvb, pinfo, tree)
See also the XXX in proto_dlg.c and proto.c around the new functions.
svn path=/trunk/; revision=2267
dissectors to be registered as dissectors for particular ports,
registered as heuristic dissectors, and registered as dissectors for
conversations, and have routines to be used both by old-style and
new-style dissectors to call registered dissectors.
Have the code that calls those dissectors translate the arguments as
necessary. (For conversation dissectors, replace
"find_conversation_dissector()", which just returns a pointer to the
dissector, with "old_try_conversation_dissector()" and
"try_conversation_dissector()", which actually call the dissector, so
that there's a single place at which we can do that translation. Also
make "dissector_lookup()" static and, instead of calling it and, if it
returns a non-null pointer, calling that dissector, just use
"old_dissector_try_port()" or "dissector_try_port()", for the same
reason.)
This allows some dissectors that took old-style arguments and
immediately translated them to new-style arguments to just take
new-style arguments; make them do so. It also allows some new-style
dissectors not to have to translate arguments before calling routines to
look up and call dissectors; make them not do so.
Get rid of checks for too-short frames in new-style dissectors - the
tvbuff code does those checks for you.
Give the routines to register old-style dissectors, and to call
dissectors from old-style dissectors, names beginning with "old_", with
the routines for new-style dissectors not having the "old_". Update the
dissectors that use those routines appropriately.
Rename "dissect_data()" to "old_dissect_data()", and
"dissect_data_tvb()" to "dissect_data()".
svn path=/trunk/; revision=2218
a particular type, rather than taking a varargs list, along the lines of
the "proto_tree_add_XXX_format()" routines.
Replace most calls to "proto_tree_add_item()" and
"proto_tree_add_item_hidden()" with calls to those routines.
Rename "proto_tree_add_item()" and "proto_tree_add_item_hidden()" to
"proto_tree_add_item_old()" and "proto_tree_add_item_hidden_old()", and
add new "proto_tree_add_item()" and "proto_tree_add_item_hidden()"
routines that don't take the item to be added as an argument - instead,
they fetch the argument from the packet whose tvbuff was handed to them,
from the offset handed to them.
svn path=/trunk/; revision=2031
"packet-eth.c", and "packet-fddi.c" include the include files that
declare the functions they export, so that the declarationss in the
header files will be checked against the definitions in the source
files.
svn path=/trunk/; revision=1981