use to format 64-bit integers.
Fix the RSVP dissector to use that rather than hardcoding "%ll" in.
Remove the "only if G_HAVE_GINT64 is defined" bit from the discussion of
64-bit integers - we're too dependent on having them to support
compilers that don't have a 64-bit integral data type. Do, however,
note that neither "long" nor "long long" are acceptable, and also note
that you shouldn't assume "%ll" does the trick for printing them.
svn path=/trunk/; revision=11182
0 means "there is no FCS in the packet data", 4 means "there is an FCS
in the packet data", -1 means "I don't know whether there's an FCS in
the packet data, guess based on the packet size".
Assume that Ethernet encapsulated inside other protocols has no FCS, by
having the "eth" dissector assume that (and not check for an Ethernet
pseudo-header).
Have "ethertype()" take an argument giving the FCS size; pass 0 when
appropriate.
Fix up Wiretap routines to set the pseudo-header. This means we no
longer use the "generic" seek-and-read routine, so get rid of it.
svn path=/trunk/; revision=8574
Make the Ethereal "decode as" stuff not blow up with string dissector
tables.
Selectors for uint dissector tables are unsigned, not signed.
svn path=/trunk/; revision=8408
comparison function to use based on the type value passed in. For the
traditional unsigned integer table, require FT_UINT{8,16,24,32}; if the
type is FT_STRING or FT_STRINGZ, use the string hashing functions
instead.
Add routines for manipulating entries and looking up dissectors in
string dissector tables.
svn path=/trunk/; revision=8407
"dissector_get_port_handle()", "dissector_handle_get_short_name()",
"dissector_handle_get_protocol_index()", "new_register_dissector()", and
"new_create_dissector_handle()" to the list of APIs available to
plugins on platforms where plugins have to call core Ethereal routines
through pointers.
"extern"alize the remaining routines in "epan/packet.h".
svn path=/trunk/; revision=8116
Add a new routine to iterate through all dissector tables, calling a
routine for each table, to support having the "-d" code list all
dissector tables.
Get rid of "dissector_handle_get_dissector_name()"; it was put in there
for "-d", but turns out not to be necessary for that.
Clean up the usage message a bit (using the convention, adhered to by at
least some UNIX utilities, of listing all the flags with no arguments in
a single lump, and then listing the ones with arguments individually,
and also putting "-v" and "-h" in a separate lump, as Ethereal does).
svn path=/trunk/; revision=7788
header.
Add overflow checks to "BYTES_ARE_IN_FRAME()", and cast all arguments to
unsigned values (negative values should never be passed) to squelch
compiler warnings.
svn path=/trunk/; revision=6567
Check the next header type - properly handling extension headers - in
"capture_ipv6()".
Get rid of the count of IPv6 packets - we break that down in
"capture_ipv6()" now.
Fix a typo.
svn path=/trunk/; revision=6510
equivalents for the epan/ directory but leave winsock2.h in inet_pton.c
and inet_ntop.c for now (can't estimate the consequences).
svn path=/trunk/; revision=5928
in the "packet_info" structure instead, as we don't need a pointer for
every single frame in the capture file, just for each frame for which we
currently have an open "epan_dissect_t".
svn path=/trunk/; revision=5614
A little work still needs to be done on the new NCP dissector -- make
some of the COL_INFO texts more useful, handle a Unicode issue, and
modify some of the cases that use "request conditions".
But the NCP dissector as it stands is very usable now.
Note: I didn't merge in the PROTO_LENGTH_UNTIL_END macro... I wanted
to think about the various possible macros and review an email conversation
I had with Guy on the subject.
svn path=/trunk/; revision=5432
that return an "int", giving either an indication of how much data was
dissected, an indication of how much more data is needed from TCP to
dissect, or 0, meaning "this isn't one of my packets").
svn path=/trunk/; revision=5260
dissectors. "Old-style" dissectors return nothing. "New-style"
dissectors return one of:
a positive integer, giving the number of bytes worth of data in
the tvbuff that it considered to be part of the PDU in the
tvbuff;
zero, if it didn't consider the data in the tvbuff to be a PDU
for its protocol;
a negative integer, giving the number of additional bytes worth
of data in needs to get the complete PDU (for use with
fragmentation/segmentation when the length of the PDU isn't
known to the protocol atop the one the dissector is dissecting).
Have "call_dissector()" return the return value of new-style dissectors,
and the length of the tvbuff handed to it for old-style dissectors.
Have "dissector_try_port()" return FALSE if the subdissector is a
new-style dissector and returned 0.
Make the EAP dissector a new-style dissector, and have a "EAP fragment"
dissector that is also a new-style dissector and handles fragmentation
of EAP messages (as happens above, for example, RADIUS). Also, clean up
some signed vs. unsigned comparison problems.
Reassemble EAP-Message AVPs in RADIUS.
svn path=/trunk/; revision=4811
"init_dissection()" which calls "epan_conversation_init()", does the
work that "init_all_protocols()" did, and then calls
"reassemble_init()", so that the standard sequence of dissection
initialization is done in one place, rather than having multiple places
call the same sequence of routines.
svn path=/trunk/; revision=4797
"data source" has a name and a top-level tvbuff, and frames can have a
list of data sources associated with them.
Use the tvbuff pointer to determine which data source is the data source
for a given field; this means we don't have to worry about multiple data
sources with the same name - the only thing the name does is label the
notebook tab for the display of the data source, and label the hex dump
of the data source in print/Tethereal output.
Clean up a bunch of things discovered in the process of doing the above.
svn path=/trunk/; revision=4749
variables wrap-around. Since the request/reply packets are related via
a hash based on these uniqueness variables, long NCP traces can
have mis-matches reqeust/reply records.
Thus, only do the hash-lookup for the reply packet during the first
sequential scan of the trace file. Once the pertinent info is found,
store it in the packet's private data area.
Since the memory allocated for the hash and for the structures that make
up the keys are no longer needed after the first sequential run through
the trace file, arrange to free that memory after the first sequential
run. Similar to the register_init_routine() that allows dissectors
to register callbacks for calling *before* a capture file is loaded,
set up a register_postseq_cleanup_routine() function that allows
dissectors to register callbacks for calling *after* the first
sequential run-through of the trace file is made. This is not
a *final* cleanup callback, since Ethereal will still have that trace file
open for random-access reading.
I didn't have tethereal call postseq_cleanup_all_protocols() since
tethereal doesn't keep the trace file open for random-access reading.
I could easily be swayed to make tethereal call that function, however.
svn path=/trunk/; revision=4484
Put a hash-table of "interesting" fields in the per-proto-tree data.
The dfilter code records which fields/protocols are "interesting" (by which
I mean, their value or existence is checked). Thus, the proto_tree routines
can create special arrays of field_info*'s that are ready for the dfilter
engine to use during a filter operation.
Also store the "proto_tree_is_visible" boolean, renamed "visible", in
the per-proto-tree data.
Move epan_dissect_t to its own header file to make #include dependencies
easier to handle.
Provide epan_dissect_fill_in_columns(), which accepts just the epan_dissect_t*
as an argument.
epan_dissect_new() needs to be followed by epan_dissect_run() for the
dissection to actually take place. Between those two calls,
epan_dissect_prime_dfilter() can be run 0, 1, or multiple times in order to
prime the empty proto_tree with the "intersesting" fields from the dfilter_t.
svn path=/trunk/; revision=4422
structure to the "packet_info" structure; only stuff that's permanently
stored with each frame should be in the "frame_data" structure, and the
"column_info" structure is not guaranteed to hold the column values for
that frame at all times - it was only in the "frame_data" structure so
that it could be passed to dissectors, and, as all dissectors are now
passed a pointer to a "packet_info" structure, it could just as well be
put in the "packet_info" structure.
That saves memory, by shrinking the "frame_data" structure (there's one
of those per frame), and also lets us clean up the code a bit.
svn path=/trunk/; revision=4370
specifies how the selector values used as keys in those tables are to be
displayed, and the title to use when displaying the table.
Use that information in the code to display the initial and current
entries of various dissector tables.
Have the dissector for BACnet APDUs register itself by name, and have
the BACnet NPDU dissector call it iff the BAC_CONTROL_NET bit isn't set,
rather than doing it with a dissector table.
svn path=/trunk/; revision=4358
dissector table contain both a hash table, to use to look up port
numbers to find a dissector, and a list of all dissectors that *could*
be assigned to ports in that hash table, to be used by user interface
code.
Make the "Decode As" dialog box code use that.
Also make it *not* let you choose whether to set the dissector for both
the UDP and TCP versions of a port; some protocols run only atop TCP,
some run only atop UDP, and even those that can run atop both may have
different dissector handles to use over TCP and UDP, so handling a
single merged list would be a mess. (If the user is setting the
dissector for a TCP port, only those protocols that Ethereal can handle
over TCP should be listed; if the user is setting the dissector for a
UDP port, only those protocols that Ethereal can handle over TCP should
be listed; if the user is setting a dissector for both, only those
protocols that Ethereal can handle over *both* TCP *and* UDP should be
listed, *and* there needs to be a way to let the "Decode As" code get
both the TCP handle *and* the UDP handle and use the right ones. If
somebody really wants that, they need to implement all of the above if
they want the code to be correct.)
Fix the code that handles setting the dissection for the IP protocol
number to correctly update the lists of protocols being dissected as TCP
and as UDP; the code before this change wasn't updating the single such
list to add new protocols.
svn path=/trunk/; revision=4311
if found, return the dissector handle for that port.
Use that routine in the X.25 dissector; revert to attaching a dissector
handle to an X.25 virtual circuit.
svn path=/trunk/; revision=4310
take a dissector handle as an argument, rather than a pointer to a
dissector function and a protocol ID. Associate dissector handles with
dissector table entries.
svn path=/trunk/; revision=4308
than a pointer to a dissector function, as an argument.
This means that the conversation dissector is called through
"call_dissector()", so the dissector itself doesn't have to worry about
checking whether the protocol is enabled or setting
"pinfo->current_proto", so get rid of the code that does that in
conversation dissectors. Also, make the conversation dissectors static.
Get rid of some direct calls to dissectors; replace them with calls
through handles, and, again, get rid of code to check whether a protocol
is enabled and set "pinfo->current_proto" where that code isn't needed.
Make those dissectors static if they aren't already static.
Add a routine "create_dissector_handle()" to create a dissector handle
without registering it by name, if the dissector isn't used outside the
module in which it's defined.
svn path=/trunk/; revision=4281
from being required by anyone other than packet-data.c.
It can now be accessed with call_dissector() with the name "data".
dissect_data is now also of dissect_t.
svn path=/trunk/; revision=4271
access their own "pinfo". A packet_info is stored in epan_dissect_t,
which is created for the dissection of a single packet.
GUI functions which need to access the packet_info of the currently
selected packet used to use "pi"; now they use cfile.edt->pi. cfile's
"edt" member is the epan_dissect_t of the currently-selected packet.
The functionality of blank_packetinfo() was moved into
dissect_packet(), as that's the only place that called blank_packetinfo(),
after a spurious call to blank_packetinfo() was removed from
packet_list_select_cb().
svn path=/trunk/; revision=4246
of packet data captured.
Make the "BYTES_ARE_IN_FRAME()" macro take a "captured length of the
packet" argument.
Add some length checks to capture routines.
svn path=/trunk/; revision=4235
It makes no difference if they really are function declarations;
however, in plugins, when building on OSes that don't let
dynamically-loaded modules access functions in the main program (e.g.,
Windows), when compiling a plugin, <plugin_api.h> defines the names of
those functions as (*pointer_name), so they turn into declarations of
pointer variables pointing to the functions in question, and, on
platforms with a def/ref model in the linker, if a plugin has more than
one source file that gets linked into the plugin, the linker may get
upset at two definitions of the same variable.
svn path=/trunk/; revision=4114
"pinfo->{len,captured_len}"-adjusting currently done by the IP
dissector, make the IP dissector call that rather than doing the work
itself, make the IPv6 dissector call that rather than just adjusting the
tvbuff length itself, and make the IPX dissector call that rather than
just adjusting "pi.{len,captured_len}" itself.
This cleans things up a bit, and causes trailers to be properly reported
in IPX-over-Ethernet frames.
svn path=/trunk/; revision=3621
"old_dissector_try_port()".
There are no longer any old-style heuristic or conversation dissectors,
so get rid of "old_heur_dissector_add()" and "old_conv_dissector_add()"
and the data-structure members that support old-style heuristic and
conversation dissectors.
svn path=/trunk/; revision=3478
to_str.{c,h}. Resolved strange situation where ipx_addr_to_str was
declared in packet.h but defined in packet-ipx.c by moving
ipx_addr_to_str, ipxnet_to_str_punct, and ipxnet_to_str from packet-ipx.{c,h} to to_str.{c,h}
svn path=/trunk/; revision=3219