the (too big) buffer for 1024 network cards.
The code comes directly after the ideas in Steven's book (UNIX network
programming).
svn path=/trunk/; revision=2385
- add <stdarg.h> or <varargs.h> in snprintf.h
and remove those inclusions in the other #ifdef NEED_SNPRINTF_H codes
- remove the check of multiple inclusions in source (.c) code
(there is a bit loss of _cpp_ performance, but I prefer the gain of
code reading and maintenance; and nowadays, disk caches and VM are
correctly optimized ;-).
- protect all (well almost) header files against multiple inclusions
- add header (i.e. GPL license) in some include files
- reorganize a bit the way header files are included:
First:
#include <system_include_files>
#include <external_package_include_files (e.g. gtk, glib etc.)>
Then
#include "ethereal_include_files"
with the correct HAVE_XXX or NEED_XXX protections.
- add some HAVE_XXX checks before including some system header files
- add the same HAVE_XXX in wiretap as in ethereal
Please forgive me, if I break something (I've only compiled and regression
tested on Linux).
svn path=/trunk/; revision=2254
To test whether a file the user selected to be opened from the file
selection box is really a directory (so that we can point the file
selection box at it, rather than trying to open the directory as a
capture file, which wouldn't work), use the routine in question.
To make the GTK+ file selection box start out in the last directory from
which we opened a file, use "gtk_file_selection_complete()", rather than
"chdir()"ing to that directory.
Those changes keep us from "chdir()"ing all over the place; that way, if
Ethereal dumps core, the core dump shows up in the directory from which
it was run, rather than in the directory from which you last opened or
into which you last saved a file.
svn path=/trunk/; revision=2190
properly handle ASCII vs. Unicode in the list of interfaces;
initialize Winsock before starting a capture, so that the code
in the Win32 libpcap to get the IP address and netmask by
translating the host name to an IP address works.
svn path=/trunk/; revision=1737
specifies with "-f" and "-R" flags, respectively, or specified with
non-flag command-line arguments, as tcpdump and snoop allow.
svn path=/trunk/; revision=1663
On UNIX, if "$HOME" isn't set, try getting the user ID and the password
entry for that user ID, and, if that succeeds, get the home directory
from the password entry, otherwise use "/tmp". On NT, it may be
possible to do something similar (get the user name, and append that to
"C:\winnt\profiles\"); I'm not sure whether there's anything that can be
done on Windows 9x.
svn path=/trunk/; revision=1580
either a pointer to the directory part of the pathname (after stomping
on the pathname separator with a '\0', so don't use this on pathnames
you plan to use afterwards), or NULL if the pathname contains no
directory part, and make it handle Win32 pathnames on Win32 systems.
Use it to get the containing directory of the currently open file, so
that the "chdir()" stuff we do to cause the "File:Open" dialog box to
show you files in the directory in which you last looked works on Win32
systems.
svn path=/trunk/; revision=1555
pointer to the name of the file to which it refers (i.e., to the last
component of the pathname) in a "get_basename()" routine, and have the
code in "file.c" call it.
svn path=/trunk/; revision=1552
to "util.c", and provide a routine to free that list as well.
When picking an interface on which to do a capture (if no "-i" flag was
specified), use that routine, and pick the first interface on the list.
svn path=/trunk/; revision=1495
with MSVC 6.0 and 'nmake', the make tool that comes with MSVC.
It compiles, links, and runs. It doesn't run correctly. There's a problem
when reading files. I'm getting short reads. I'm not linking in zlib or
libsnmp because it first needs to be debugged.
I changed the plugin code to use gmodule instead of libltdl, but the
Unix build still links ethereal against libltdl. I'll fix that tonight; sorry
about leaving it in such a sad state, but I wanted to check in this code
before I left work on a Friday night. Ethereal still works, but the
building is less than optimal.
svn path=/trunk/; revision=1479
Added lots of #ifdef HAVE_*_H wrappers.
Added some #defines in config.h.win32
Check for more headers in configure.in
Added prototype for inet_aton() in inet_v6defs.h.
Changed "BYTE" token (i.e., #define) in ascend-gramamr.y because it
conflicts with a windows definition. Use HEXBYTE instead.
svn path=/trunk/; revision=1448
into "gtk/ui_util.c", and move the declarations of those UI utilities
out of "util.h" into "ui_util.h". (The header file is in the top-level
directory, rather than the "gtk" directory, because it declares
window-system-independent interfaces to routines with
window-system-dependent implementations.)
Add to "gtk/ui_util.c" a routine to set the window and icon title.
Use that routine to make the title of an Ethereal top-level window be
{filename} - Ethereal
if there's a capture open, and have "{filename}" be "<capture>" if it's
a temporary capture file.
svn path=/trunk/; revision=1255
of SNA in a packet changes the character encoding from the default ASCII
to EBCDIC.
The hex-printing routines in the GUI code and in the printing code convert
to EBCDIC if appropriate.
svn path=/trunk/; revision=1089
name, stuff as much of the name as will fit into the buffer before
returning an error, so the error message that gets displayed isn't
completely mangled.
svn path=/trunk/; revision=716
"try_tempfile()" - the first component of the name comes from the "dir"
argument, so use its length, not the length of the string in the buffer
it should fill in (said buffer may contain garbage, which may not *be* a
C string).
svn path=/trunk/; revision=705
temporary file with mode rw-------, so we won't assume that all UNIXes
will do so; instead, we set the umask to 0077 to take away all group and
other permissions, attempt to create the file, and then put the umask
back (puts into "try_tempfile()", called by "create_tempfile()" to
create temporary files, the "umask()" calls that Gilbert put into
"capture.c" to deal with the same problem).
svn path=/trunk/; revision=553
used by "mkstemp()" into a buffer supplied as an argument, trying
several directories for the tempfile, in the same fashion that the BSD
(and probably other) "tempnam()" routines do.
Have that routine cope with temporary-file directory names that don't
end with "/", as "P_tmpdir" doesn't necessarily end with "/" (and
doesn't, in GNU "libc" 2.x, at least on Linux); thanks to Gilbert
Ramirez for catching this one, and supplying the code to cope with that.
Have the code that creates the temporary file for the "Follow TCP
Stream" text use it.
svn path=/trunk/; revision=507
doesn't link with libpcap, so no packet captures can be made. The
"--disable-pcap" option has been added to the configure script. Docs
have been updated. And the string buffer size in the simple_dialog()
has been doubled so that Johan's e-mail address in the "About" dialogue
window doesn't get chopped off.
svn path=/trunk/; revision=351
influence came from
http://developer.apple.com/techpubs/mac/HIGuidelines/HIGuidelines-232.html
which has a section on dialog box and alert box messages. However,
we're largely dealing with technoids, not with The Rest Of Us, so I
didn't go as far as one perhaps should.)
Unfortunately, it looks like it's a bit more work to arrange that, if
you give a bad file name to the "-r" flag, the dialog box pop up only
*after* the main window pops up - it has the annoying habit of popping
up *before* the main window pops up, and sometimes getting *obscured* by
it, when I do that. The removal of the dialog box stuff from
"load_cap_file()" was intended to facilitate that work. (It might also
be nice if, when an open from the "File/Open" menu item fails, we keep
the file selection box open, and give the user a chance to correct
typos, choose another file name, etc.)
svn path=/trunk/; revision=310
a random name chosen by tempnam(), unknown to the user. If the user decides to save that
trace, he then uses File | Save to save it to a file. File | Save As lets him make a copy
of his named trace file as well. I also updated my e-mail address in the various credit
locations.
svn path=/trunk/; revision=242
change include of <strings.h> in "menu.c" to include <string.h>, the
latter being the ANSI standard include file for string functions; that
eliminates all use of <strings.h< so get rid of test for its existence
in "configure.in" as well.
svn path=/trunk/; revision=239
helper routines for packet dissecting, and away from "util.c", which is
now all GUI-related. (Among other things, this makes life more pleasant
for Gilbert Ramirez's "tethereal" stuff, although a lot more separation
of GUI from other stuff needs to be done to make that - or a
"curses"-based variant of Ethereal, or a variant using some other GUI
toolkit - work smoothly.)
svn path=/trunk/; revision=235
reference the protocol tree with struct proto_tree and struct proto_item
objects. That way, the packet decoding source code file can be used with
non-gtk packet decoders, like a curses-based ethereal, e.g. I also re-arranged
some of the information in packet.h to more appropriate places (like other
packet-*.[ch] files).
svn path=/trunk/; revision=223
wiretap and gtk+-1.1.x. I also added an #include to util.c to keep
it from complaining about a lack of a definition of vsnprintf when
compiling with gtk+-1.1.x.
svn path=/trunk/; revision=136
* Hacks to the filter interface (Gerald)
* About box (Laurent)
* AppleTalk support (Simon)
* Mods to the match_strval routine (Gerald)
svn path=/trunk/; revision=61
1) renaming "snprintf.h" to "snprintf-imp.h" (it contains stuff
used by the "snprintf()" *implementation*, but not stuff it
*exports*);
2) creating a new "snprintf.h" to declare "vsnprintf()" and
"snprintf()";
3) removing an unused variable;
4) fixing a call to "add_item_to_tree()" to handle the
possibility of "ntohl()" returning a "long" rather than an
"int".
svn path=/trunk/; revision=47
- Separated display and capture filters; rearranged some of the look and feel
- Lots of other miscellaneous fixes and updates
svn path=/trunk/; revision=38
generalizes the column printing code, adds a "frame" tree item to
the tree view, and fixes a bunch of miscellaneous coding bugs.
svn path=/trunk/; revision=31